Unidades de corte internas KM32TS™

Selecionar filtros
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (22)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (22)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (22)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (22)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (22)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (22)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (22)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (22)
  • M Stainless Steel (22)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (22)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (22)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (22)
  • K Cast Iron (22)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (22)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (22)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (22)
  • N Non-Ferrous Materials (22)
    • N1
      Wrought Aluminum (22)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (22)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (22)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (22)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (22)
    • N6
      Carbon, Graphite Composites, CFRP (22)
    • N7
      MMC's (22)
  • S High-Temp Alloys (22)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (22)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (22)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (22)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (22)
  • H Hardened Materials (22)
    • H1
      Hardened Materials 44-48 HRC (22)
    • H2
      Hardened Materials 48-55 HRC (19)
    • H3
      Hardened Materials 56-60 HRC (18)
    • H4
      Hardened Materials >60 HRC (18)
  • C CFRP Materials (18)
    • C1
      CFRP, CFRP / CFRP (18)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (18)
Applications
Applications
  • Facing Facing (18)
  • Grooving Grooving (1)
  • ID Grooving ID Grooving (1)
  • ID Thread Turning ID Thread Turning (5)
  • Multiple Direction Cutting Multiple Direction Cutting (18)
  • Profiling Profiling (17)
  • TRN Boring TRN Boring (17)
  • Threading Threading (5)
  • Turning Turning (18)
Type of Thread
Type of Thread
  • 55 (3)
  • 60 (4)
  • ACME (2)
  • API RD (2)
  • BSPT (3)
  • BSW (3)
  • BUTTRESS (1)
  • M (3)
  • NPT (3)
  • NPTF (3)
  • RD DIN 405 (2)
  • STUB ACME (2)
  • TR DIN 103 (2)
  • UN (4)
  • UNJ (3)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (19)
  • Interrupted (4)
  • Lightly Interrupted Cut (19)
  • Smooth Cut (19)
  • Varying Depth of Cut (19)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (4)
  • 93.0 (6)
  • 95.0 (12)
Tool Cutting Edge Angle Min a Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (19)
  • 2.0 (19)
  • 3.0 (3)
  • 4.0 (13)
  • 8.0 (3)
Cutting Edges Per Insert Min a Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 1.969 in (3)
  • 2.362 in (4)
  • 2.757 in (7)
  • 3.15 in (5)
  • 3.543 in (3)
Over All Length [L] Min a Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 50.0 mm (3)
  • 60.0 mm (4)
  • 70.0 mm (7)
  • 80.0 mm (5)
  • 90.0 mm (3)
Over All Length [L] Min a Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (2)
  • 0.002 in (3)
  • 0.003 in (3)
  • 0.004 in (20)
  • 0.006 in (2)
  • 0.008 in (21)
  • 0.01 in (1)
  • 0.016 in (18)
  • 0.02 in (1)
  • 0.028 in (1)
  • 0.03 in (1)
  • 0.031 in (19)
  • 0.037 in (1)
  • 0.039 in (1)
  • 0.047 in (12)
  • 0.049 in (1)
  • 0.06 in (1)
  • 0.062 in (3)
  • 0.063 in (5)
  • 0.069 in (1)
  • 0.094 in (1)
Corner Radius Min a Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (2)
  • 0.05 mm (3)
  • 0.076 mm (3)
  • 0.1 mm (20)
  • 0.151 mm (2)
  • 0.2 mm (21)
  • 0.225 mm (1)
  • 0.4 mm (18)
  • 0.5 mm (1)
  • 0.701 mm (1)
  • 0.75 mm (1)
  • 0.775 mm (1)
  • 0.8 mm (18)
  • 0.925 mm (1)
  • 1.0 mm (1)
  • 1.201 mm (12)
  • 1.25 mm (1)
  • 1.5 mm (1)
  • 1.576 mm (3)
  • 1.6 mm (5)
  • 1.75 mm (1)
  • 2.375 mm (1)
Corner Radius Min a Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (4)
  • 241 (3)
  • CG5 (5)
  • CL4 (3)
  • CM1 (5)
  • CM2 (4)
  • CM3 (3)
  • CM4 (3)
  • CPX (4)
  • CW2 (3)
  • CW2015 (4)
  • CW5025 (4)
  • GX (3)
  • HCK20 (1)
  • HCM15 (1)
  • HK1500 (3)
  • HT2 (3)
  • HTX (3)
  • K00331 (1)
  • K060 (4)
  • K090 (4)
  • K1 (3)
  • K10M (4)
  • K10P (4)
  • K10U (4)
  • K15 (3)
  • K15U (4)
  • K20K (4)
  • K21 (3)
  • K25M (4)
  • K25P (4)
  • K2885 (1)
  • K313 (19)
  • K35P (1)
  • K420 (5)
  • K45 (4)
  • K4H (1)
  • K68 (21)
  • KB1340 (3)
  • KB1345 (6)
  • KB1610 (15)
  • KB1625 (6)
  • KB1630 (11)
  • KB5610 (13)
  • KB5625 (9)
  • KB5630 (9)
  • KB9610 (14)
  • KB9640 (3)
  • KBH10 (4)
  • KBH10B (4)
  • KBH20 (13)
  • KBH20B (4)
  • KBK35 (3)
  • KC210 (4)
  • KC250 (9)
  • KC5010 (21)
  • KC5025 (22)
  • KC5410 (19)
  • KC5510 (4)
  • KC5525 (4)
  • KC710 (9)
  • KC720 (22)
  • KC722 (6)
  • KC730 (22)
  • KC7310 (8)
  • KC732 (18)
  • KC8050 (18)
  • KC810 (19)
  • KC850 (19)
  • KC9010 (15)
  • KC9025 (18)
  • KC910 (19)
  • KC9105 (15)
  • KC9110 (19)
  • KC9120 (15)
  • KC9125 (18)
  • KC9140 (4)
  • KC9145 (4)
  • KC9215 (4)
  • KC9225 (18)
  • KC9240 (18)
  • KC9240NEW (18)
  • KC9245 (4)
  • KC9315 (18)
  • KC9320 (16)
  • KC9325 (15)
  • KC935 (19)
  • KC950 (16)
  • KC990 (18)
  • KCD25 (15)
  • KCK05 (18)
  • KCK05B (6)
  • KCK15 (15)
  • KCK15B (15)
  • KCK20 (19)
  • KCK20B (19)
  • KCM15 (18)
  • KCM15B (13)
  • KCM25 (18)
  • KCM25B (15)
  • KCM35 (11)
  • KCM35B (3)
  • KCP05 (18)
  • KCP05B (4)
  • KCP10 (18)
  • KCP10B (19)
  • KCP25 (18)
  • KCP25B (19)
  • KCP25C (18)
  • KCP30 (18)
  • KCP30B (4)
  • KCP40 (4)
  • KCP40B (4)
  • KCPK05 (8)
  • KCS10 (17)
  • KCS10B (18)
  • KCU10 (19)
  • KCU10B (18)
  • KCU25 (19)
  • KCU25B (18)
  • KD050 (15)
  • KD081 (4)
  • KD100 (18)
  • KD105 (12)
  • KD120 (15)
  • KD1400 (18)
  • KD1405 (18)
  • KD1425 (18)
  • KM1 (3)
  • KMF (3)
  • KS15 (3)
  • KT1120 (3)
  • KT125 (8)
  • KT150 (8)
  • KT175 (19)
  • KT315 (19)
  • KT325 (3)
  • KTP10 (18)
  • KU10 (9)
  • KU10T (19)
  • KU25T (3)
  • KU30T (16)
  • KY1310 (4)
  • KY1320 (4)
  • KY1540 (4)
  • KY1615 (4)
  • KY2000 (4)
  • KY2100 (4)
  • KY3000 (4)
  • KY3400 (4)
  • KY3500 (4)
  • KY4000 (3)
  • KY4300 (4)
  • KY4400 (4)
  • KYHK15B (4)
  • KYK10 (4)
  • KYK25 (4)
  • KYK35 (4)
  • KYS25 (4)
  • KYS30 (4)
  • NL200 (3)
  • NL250 (4)
  • NL300 (3)
  • NL400 (3)
  • NL920 (4)
  • P25 (5)
  • PB100 (3)
  • PB170 (3)
  • PB250 (3)
  • PB300 (3)
  • PS5 (3)
  • SP0819 (3)
  • SP3019 (3)
  • SP4019 (4)
  • SP4066 (1)
  • THM (4)
  • THM-X (3)
  • THMF-X (3)
  • TN10P (5)
  • TN10U (4)
  • TN15M (4)
  • TN15U (4)
  • TN2000 (3)
  • TN20K (4)
  • TN20P (4)
  • TN30M (4)
  • TN30P (4)
  • TN4000 (3)
  • TN5015 (4)
  • TN5020 (3)
  • TN5105 (4)
  • TN5120 (4)
  • TN6010 (5)
  • TN6025 (7)
  • TN7005 (4)
  • TN7010 (4)
  • TN7015 (4)
  • TN7025 (4)
  • TN7035 (3)
  • TN7105 (3)
  • TN7110 (5)
  • TN7115 (4)
  • TN7125 (3)
  • TN7135 (3)
  • TN8025 (4)
  • TTI15 (3)
  • TTR (3)
  • TTS (3)
  • TTX (3)
  • W00162 (4)
  • WBH10C (9)
  • WBH10P (13)
  • WBH10U (13)
  • WBH20P (4)
  • WBH25P (16)
  • WBH25U (4)
  • WBH30P (13)
  • WBK40U (3)
  • WBK45U (4)
  • WDN00U (18)
  • WDN25U (18)
  • WK05CT (4)
  • WK15CT (3)
  • WK20CT (15)
  • WM15CT (16)
  • WM25CT (13)
  • WM35CT (4)
  • WP05CT (3)
  • WP15CT (13)
  • WP25CT (18)
  • WP35CT (4)
  • WS10PT (4)
  • WS25PT (4)
  • WU10HT (4)
  • WU10PT (4)
  • WU25PT (3)
  • X00511 (3)
  • X00580 (3)
  • X00581 (3)
  • X00582 (3)
  • X00583 (3)
  • X00584 (3)
  • X00585 (3)
  • X00586 (3)
  • X00591 (3)
  • X00592 (3)
  • X00593 (3)
  • X00594 (3)
  • X00596 (3)
  • X00597 (3)
  • X00599 (3)
Hand Of Tool
Hand Of Tool
  • L (10)
  • R (12)
Wiper Insert
Wiper Insert
  • N (22)
  • Y (18)
F Dimension
F Dimension
  • 7.0 mm (3)
  • 9.0 mm (3)
  • 11.0 mm (3)
  • 13.0 mm (5)
  • 17.0 mm (8)
F Dimension Min a F Dimension Max
F Dimension
F Dimension
  • 0.276 in (3)
  • 0.354 in (3)
  • 0.433 in (3)
  • 0.512 in (5)
  • 0.669 in (8)
F Dimension Min a F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 13.0 mm (3)
  • 16.0 mm (3)
  • 18.5 mm (1)
  • 20.0 mm (2)
  • 25.0 mm (5)
  • 32.0 mm (8)
Minimum Axial Groove Diameter Min a Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.512 in (3)
  • 0.63 in (3)
  • 0.728 in (1)
  • 0.787 in (2)
  • 0.984 in (5)
  • 1.26 in (8)
Minimum Axial Groove Diameter Min a Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (1)
Maximum Axial Groove Diameter Min a Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (1)
Maximum Axial Groove Diameter Min a Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (13)
  • E (5)
  • S (4)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (4)
  • DOUBLE POSITIVE (3)
  • NEGATIVE-ZERO (2)
  • NEUTRAL (ZERO) (7)
  • POSITIVE-ZERO (6)
Maximum Bore Depth
Maximum Bore Depth
  • 1.379 in (3)
  • 1.655 in (2)
  • 1.701 in (2)
  • 2.205 in (2)
  • 2.283 in (4)
  • 2.362 in (6)
  • 2.953 in (3)
Maximum Bore Depth Min a Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 35.0 mm (3)
  • 42.0 mm (2)
  • 43.2 mm (2)
  • 56.0 mm (2)
  • 58.0 mm (4)
  • 60.0 mm (6)
  • 75.0 mm (3)
Maximum Bore Depth Min a Maximum Bore Depth Max
frontEnd
Clamp Style
Clamp Style
  • M (6)
  • N (1)
  • S (15)
Cutting Width
Cutting Width
  • 0.02 in (1)
  • 0.031 in (1)
  • 0.035 in (1)
  • 0.039 in (1)
  • 0.041 in (1)
  • 0.047 in (1)
  • 0.055 in (1)
  • 0.058 in (1)
  • 0.06 in (1)
  • 0.062 in (1)
  • 0.067 in (1)
  • 0.069 in (1)
  • 0.077 in (1)
  • 0.079 in (1)
  • 0.088 in (1)
  • 0.089 in (1)
  • 0.095 in (1)
  • 0.098 in (1)
  • 0.108 in (1)
  • 0.119 in (1)
  • 0.125 in (1)
  • 0.126 in (1)
  • 0.128 in (1)
  • 0.129 in (1)
  • 0.138 in (1)
  • 0.15 in (1)
  • 0.152 in (1)
Cutting Width Min a Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (1)
  • 0.775 mm (1)
  • 0.8 mm (1)
  • 0.9 mm (1)
  • 1.0 mm (1)
  • 1.05 mm (1)
  • 1.201 mm (1)
  • 1.401 mm (1)
  • 1.475 mm (1)
  • 1.5 mm (1)
  • 1.576 mm (1)
  • 1.701 mm (1)
  • 1.75 mm (1)
  • 1.951 mm (1)
  • 2.0 mm (1)
  • 2.2 mm (1)
  • 2.225 mm (1)
  • 2.25 mm (1)
  • 2.401 mm (1)
  • 2.5 mm (1)
  • 2.75 mm (1)
  • 3.0 mm (1)
  • 3.176 mm (1)
  • 3.2 mm (1)
  • 3.25 mm (1)
  • 3.276 mm (1)
  • 3.5 mm (1)
  • 3.801 mm (1)
  • 3.85 mm (1)
Cutting Width Min a Cutting Width Max
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (12)
  • D-DIAMOND/RHOMBIC 55 (6)
  • LT-TRIANGLE LAY DOWN THREAD 60 (3)
  • TN-TOP NOTCH (1)
Insert Size
Insert Size
  • 2 (1)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.119 in (3)
  • 0.125 in (1)
  • 0.177 in (3)
Maximum Cutting Depth Min a Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 3.0 mm (3)
  • 3.176 mm (1)
  • 4.5 mm (3)
Maximum Cutting Depth Min a Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (15)
  • B L (18)
  • C A (4)
  • C N (4)
  • D P (18)
  • H T (19)
  • H W (22)
backEnd
System Size
System Size
  • KM32 (19)
  • KM32TS (3)
No filters matching ""
Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
product-image
Please adjust the following properties from

Código de catálogo ISO

Número do catálogo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Você deve ser registrado para ver as informações do seu painel
Session expired due to inactivity, please login again
Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
itens adicionados com sucesso ao carrinho
Ver o carrinho

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Código de catálogo ISO Classe    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?