Rosqueamento de assentamento

Selecionar filtros
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (9)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (9)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (9)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (9)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (9)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (9)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (9)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (9)
  • M Stainless Steel (9)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (9)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (9)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (9)
  • K Cast Iron (9)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (9)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (9)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (9)
  • N Non-Ferrous Materials (9)
    • N1
      Wrought Aluminum (9)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (9)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (9)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (9)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (9)
    • N6
      Carbon, Graphite Composites, CFRP (9)
    • N7
      MMC's (9)
  • S High-Temp Alloys (9)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (9)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (9)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (9)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (9)
  • H Hardened Materials (9)
    • H1
      Hardened Materials 44-48 HRC (9)
Applications
Applications
  • ID Thread Turning ID Thread Turning (9)
  • Threading Threading (9)
Type of Thread
Type of Thread
  • 55 (9)
  • 60 (9)
  • ACME (9)
  • API (2)
  • API BUTTRESS (2)
  • API RD (7)
  • BSPT (7)
  • BSW (9)
  • M (9)
  • NPT (7)
  • NPTF (7)
  • RD DIN 405 (9)
  • STUB ACME (9)
  • TR DIN 103 (9)
  • UN (7)
  • UNJ (7)
Over All Length [L]
Over All Length [L]
  • 3.938 in (2)
  • 4.331 in (2)
  • 4.921 in (1)
  • 5.513 in (4)
Over All Length [L] Min a Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 100.0 mm (2)
  • 110.0 mm (2)
  • 125.0 mm (1)
  • 140.0 mm (4)
Over All Length [L] Min a Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (4)
  • 0.002 in (7)
  • 0.003 in (7)
  • 0.004 in (4)
  • 0.006 in (7)
  • 0.008 in (7)
  • 0.012 in (2)
  • 0.017 in (2)
  • 0.028 in (4)
  • 0.037 in (5)
  • 0.055 in (1)
Corner Radius Min a Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (4)
  • 0.05 mm (7)
  • 0.076 mm (7)
  • 0.1 mm (4)
  • 0.151 mm (7)
  • 0.2 mm (7)
  • 0.301 mm (2)
  • 0.426 mm (2)
  • 0.701 mm (4)
  • 0.925 mm (5)
  • 1.401 mm (1)
Corner Radius Min a Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HCK20 (4)
  • K00331 (4)
  • K15 (8)
  • K68 (4)
  • KC5010 (4)
  • KC5025 (9)
  • KC710 (5)
  • KC720 (8)
  • KC722 (4)
  • KC730 (9)
  • KU25T (4)
  • P25 (8)
  • SP4066 (3)
  • TN6025 (9)
Hand Of Tool
Hand Of Tool
  • L (4)
  • R (5)
F Dimension
F Dimension
  • 13.0 mm (2)
  • 17.0 mm (2)
  • 22.0 mm (1)
  • 27.0 mm (4)
F Dimension Min a F Dimension Max
F Dimension
F Dimension
  • 0.512 in (2)
  • 0.669 in (2)
  • 0.866 in (1)
  • 1.063 in (4)
F Dimension Min a F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 25.0 mm (2)
  • 32.0 mm (2)
  • 40.0 mm (1)
  • 50.0 mm (4)
Minimum Axial Groove Diameter Min a Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.984 in (2)
  • 1.26 in (2)
  • 1.575 in (1)
  • 1.969 in (4)
Minimum Axial Groove Diameter Min a Minimum Axial Groove Diameter Max
Maximum Bore Depth
Maximum Bore Depth
  • 2.769 in (2)
  • 3.476 in (2)
  • 3.907 in (1)
  • 4.726 in (4)
Maximum Bore Depth Min a Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 70.325 mm (2)
  • 88.301 mm (2)
  • 99.25 mm (1)
  • 120.025 mm (4)
Maximum Bore Depth Min a Maximum Bore Depth Max
No filters matching ""
Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
product-image
Please adjust the following properties from

Código de catálogo ISO

Número do catálogo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Você deve ser registrado para ver as informações do seu painel
Session expired due to inactivity, please login again
Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
itens adicionados com sucesso ao carrinho
Ver o carrinho

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Código de catálogo ISO Classe    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?