Barras de mandrilar de furo pequeno para abertura de canais e rosqueamento

Selecionar filtros
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (12)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (12)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (12)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (12)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (12)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (12)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (12)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (12)
  • M Stainless Steel (12)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (12)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (12)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (12)
  • K Cast Iron (12)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (12)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (12)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (12)
  • N Non-Ferrous Materials (12)
    • N1
      Wrought Aluminum (12)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (12)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (12)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (1)
    • N7
      MMC's (1)
  • S High-Temp Alloys (1)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (1)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (1)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (1)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (1)
Select All Star
  • US (4)
Applications
Applications
  • Back Boring Back Boring (2)
  • Multiple Direction Cutting Multiple Direction Cutting (13)
  • TRN Boring TRN Boring (17)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 60.0 (6)
  • 90.0 (7)
  • 95.0 (4)
Tool Cutting Edge Angle Min a Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (1)
  • 2.0 (6)
  • 3.0 (6)
  • 4.0 (3)
Cutting Edges Per Insert Min a Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 2.5 in (1)
  • 3.0 in (1)
  • 3.996 in (2)
  • 4.0 in (7)
  • 4.996 in (1)
  • 6.0 in (3)
  • 8.0 in (2)
Over All Length [L] Min a Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 63.5 mm (1)
  • 76.2 mm (1)
  • 101.5 mm (2)
  • 101.601 mm (7)
  • 126.9 mm (1)
  • 152.4 mm (3)
  • 203.201 mm (2)
Over All Length [L] Min a Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (2)
  • 0.004 in (3)
  • 0.005 in (3)
  • 0.007 in (4)
  • 0.015 in (4)
  • 0.016 in (1)
  • 0.031 in (1)
  • 0.063 in (1)
Corner Radius Min a Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (2)
  • 0.1 mm (3)
  • 0.125 mm (3)
  • 0.176 mm (4)
  • 0.375 mm (4)
  • 0.4 mm (1)
  • 0.775 mm (1)
  • 0.8 mm (1)
  • 1.6 mm (1)
Corner Radius Min a Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • ALO (1)
  • C2 (1)
  • C25 (6)
  • CG5 (12)
  • CG6 (9)
  • CM1 (9)
  • CPD1 (1)
  • TN7 (1)
  • WK20CT (1)
Hand Of Tool
Hand Of Tool
  • L (2)
  • R (15)
Wiper Insert
Wiper Insert
  • N (12)
F Dimension
F Dimension
  • 3.901 mm (2)
  • 3.95 mm (2)
  • 4.45 mm (2)
  • 5.551 mm (2)
  • 5.95 mm (2)
  • 7.075 mm (2)
  • 7.101 mm (1)
  • 7.551 mm (1)
  • 8.65 mm (1)
  • 8.701 mm (1)
  • 13.925 mm (1)
F Dimension Min a F Dimension Max
F Dimension
F Dimension
  • 0.154 in (2)
  • 0.156 in (2)
  • 0.176 in (2)
  • 0.219 in (2)
  • 0.234 in (2)
  • 0.279 in (2)
  • 0.28 in (1)
  • 0.297 in (1)
  • 0.341 in (1)
  • 0.343 in (1)
  • 0.548 in (1)
F Dimension Min a F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 6.9 mm (2)
  • 7.926 mm (2)
  • 8.175 mm (2)
  • 10.675 mm (2)
  • 11.9 mm (1)
  • 12.15 mm (1)
  • 12.226 mm (2)
  • 13.851 mm (1)
  • 15.326 mm (1)
  • 15.375 mm (1)
  • 17.026 mm (1)
  • 23.75 mm (1)
Minimum Axial Groove Diameter Min a Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.272 in (2)
  • 0.312 in (2)
  • 0.322 in (2)
  • 0.42 in (2)
  • 0.47 in (1)
  • 0.479 in (1)
  • 0.481 in (2)
  • 0.545 in (1)
  • 0.603 in (1)
  • 0.605 in (1)
  • 0.67 in (1)
  • 0.935 in (1)
Minimum Axial Groove Diameter Min a Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (4)
  • E (6)
  • S (7)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (6)
  • NEUTRAL (ZERO) (11)
Maximum Bore Depth
Maximum Bore Depth
  • 0.75 in (2)
  • 1.0 in (1)
  • 1.125 in (2)
  • 1.25 in (1)
  • 1.498 in (1)
  • 1.5 in (1)
  • 1.502 in (2)
  • 1.875 in (1)
  • 2.0 in (1)
  • 2.249 in (2)
  • 2.501 in (1)
  • 3.0 in (2)
Maximum Bore Depth Min a Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 19.05 mm (2)
  • 25.401 mm (1)
  • 28.576 mm (2)
  • 31.75 mm (1)
  • 38.051 mm (1)
  • 38.1 mm (1)
  • 38.125 mm (2)
  • 47.625 mm (1)
  • 50.801 mm (1)
  • 57.125 mm (2)
  • 63.526 mm (1)
  • 76.2 mm (2)
Maximum Bore Depth Min a Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (5)
  • S (12)
frontEnd
Cutting Width
Cutting Width
  • 0.03 in (3)
  • 0.06 in (3)
Cutting Width Min a Cutting Width Max
Cutting Width
Cutting Width
  • 0.75 mm (3)
  • 1.526 mm (3)
Cutting Width Min a Cutting Width Max
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (6)
  • GROOVING/CUTOFF MISC (2)
  • T-TRIANGLE 60 (6)
  • THREADING (3)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.04 in (2)
  • 0.06 in (2)
  • 0.093 in (3)
  • 0.168 in (1)
Maximum Cutting Depth Min a Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.026 mm (2)
  • 1.526 mm (2)
  • 2.35 mm (3)
  • 4.275 mm (1)
Maximum Cutting Depth Min a Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • D P (1)
  • H T (1)
  • H W (9)
backEnd
Back-End Diameter
Back-End Diameter
  • 4.75 mm (2)
  • 6.351 mm (2)
  • 9.525 mm (4)
  • 12.701 mm (2)
  • 15.875 mm (6)
  • 19.05 mm (1)
Back-End Diameter Min a Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.187 in (2)
  • 0.25 in (2)
  • 0.375 in (4)
  • 0.5 in (2)
  • 0.625 in (6)
  • 0.75 in (1)
Back-End Diameter Min a Back-End Diameter Max
No filters matching ""
Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
product-image
Please adjust the following properties from

Código de catálogo ISO

Número do catálogo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Você deve ser registrado para ver as informações do seu painel
Session expired due to inactivity, please login again
Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
itens adicionados com sucesso ao carrinho
Ver o carrinho

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Código de catálogo ISO Classe    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?