C-Clamping
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- K Cast Iron (15)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(15)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(15)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(11)
- N Non-Ferrous Materials (5)
- N1Wrought Aluminum (2)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (5)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2)
- N7MMC's (2)
- S High-Temp Alloys (15)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(11)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(15)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(11)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(5)
- H Hardened Materials (15)
- H1Hardened Materials 44-48 HRC(15)
- H2Hardened Materials 48-55 HRC(15)
- H3Hardened Materials 56-60 HRC(15)
- H4Hardened Materials >60 HRC(11)
Applications
Applications
Facing (17)
Multiple Direction Cutting (7)
Profiling (8)
TRN Boring (5)
Turning (16)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (13)
- Lightly Interrupted Cut (13)
- Smooth Cut (13)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (1)
- 75.0 (8)
- 90.0 (8)
- 95.0 (3)
to
Connection Style
Connection Style
- KM (15)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (4)
- 2.0 (2)
- 4.0 (4)
- 6.0 (2)
- 8.0 (7)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.362 in(5)
- 2.3622 in(15)
to
Corner Radius
Corner Radius
- 0.016 in(4)
- 0.031 in(9)
- 0.047 in(9)
- 0.063 in(9)
- 0.094 in(3)
- 0.126 in(3)
- 0.188 in(2)
- 0.25 in(4)
to
Corner Radius
Corner Radius
- 0.4 mm(4)
- 0.8 mm(9)
- 1.2 mm(9)
- 1.6 mm(9)
- 2.4 mm(3)
- 3.2 mm(3)
- 4.775 mm(2)
- 6.35 mm(4)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (11)
- CW3020 (9)
- CW5025 (5)
- K313 (2)
- K68 (3)
- KB1340 (7)
- KB9640 (7)
- KBK45 (7)
- KY1540 (11)
- KY1615 (3)
- KY3500 (11)
- KY4300 (13)
- KY4400 (9)
- KYHK15B (13)
- KYK25 (3)
- KYS25 (9)
- KYS30 (9)
- MC3 (2)
- THM (3)
- TTM09 (3)
- TTS (3)
- WK20CT (3)
Hand Of Tool
Hand Of Tool
- L (8)
- N (1)
- R (6)
Wiper Insert
Wiper Insert
- N (15)
F Dimension
F Dimension
- 0.0 mm(1)
- 38.0 mm(6)
- 43.0 mm(8)
to
F Dimension
F Dimension
- 0.0 in(1)
- 1.4961 in(6)
- 1.6929 in(8)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 86.0 mm(5)
- 180.0 mm(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 3.386 in(5)
- 7.0866 in(4)
to
Cutting Direction
Cutting Direction
- B (8)
- E (7)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (10)
- NEGATIVE-ZERO (1)
- NEUTRAL (ZERO) (4)
Maximum Bore Depth
Maximum Bore Depth
- 2.362 in(5)
- 2.3622 in(4)
to
Maximum Bore Depth
Maximum Bore Depth
- 60.0 mm(9)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (6)
- R-ROUND (6)
- S-SQUARE 90 (6)
- T-TRIANGLE 60 (2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (7)
- C A (15)
- C N (15)
- H W (9)
Back-End
Connection Type
Connection Type
- TAPER SHANK (15)
System Size
System Size
- KM63TS (15)
No filters matching ""
