Предложения по продукции

Product Family suggestions

успешно добавлено в корзину
Показать корзину

Уведомления

Отметить все как прочитанные
Mobile Menu

Метрические хвостовики

Выбрать фильтры
Filters
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (184)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (184)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (184)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (184)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (184)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (184)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (184)
  • M Stainless Steel (184)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (184)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (184)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (184)
  • K Cast Iron (184)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (184)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (184)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (184)
  • N Non-Ferrous Materials (184)
    • N1
      Wrought Aluminum
      (184)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (184)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (184)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (184)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (184)
    • N6
      Carbon, Graphite Composites, CFRP
      (184)
    • N7
      MMC's
      (184)
  • S High-Temp Alloys (184)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (184)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (184)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (184)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (184)
Select All Star
  • CN (22)
  • DE (28)
  • GB (4)
  • IN (1)
  • SG (26)
  • US (10)
Applications
Applications
  • Convex Drilling Convex Drilling (184)
  • Drilling Drilling (184)
  • Inclined Entry Drilling Inclined Entry Drilling (184)
  • Inclined Exit Drilling Inclined Exit Drilling (184)
  • Stacked Plates Drilling Stacked Plates Drilling (184)
Cutting Diameter
Cutting Diameter
  • 0.63 in (10)
  • 0.638 in (10)
  • 0.641 in (10)
  • 0.65 in (10)
  • 0.656 in (10)
  • 0.669 in (10)
  • 0.672 in (10)
  • 0.689 in (10)
  • 0.69 in (10)
  • 0.694 in (10)
  • 0.702 in (10)
  • 0.704 in (10)
  • 0.709 in (10)
  • 0.719 in (10)
  • 0.728 in (10)
  • 0.734 in (10)
  • 0.74 in (10)
  • 0.748 in (10)
  • 0.75 in (10)
  • 0.756 in (10)
  • 0.759 in (10)
  • 0.766 in (10)
  • 0.768 in (10)
  • 0.776 in (10)
  • 0.781 in (10)
  • 0.787 in (10)
  • 0.791 in (10)
  • 0.795 in (10)
  • 0.797 in (10)
  • 0.799 in (10)
  • 0.803 in (10)
  • 0.807 in (10)
  • 0.811 in (10)
  • 0.814 in (10)
  • 0.816 in (10)
  • 0.82 in (10)
  • 0.824 in (10)
  • 0.828 in (10)
  • 0.844 in (10)
  • 0.846 in (10)
  • 0.866 in (10)
  • 0.875 in (10)
  • 0.884 in (10)
  • 0.886 in (10)
  • 0.906 in (10)
  • 0.925 in (10)
  • 0.937 in (10)
  • 0.946 in (10)
  • 0.965 in (10)
  • 0.969 in (10)
  • 0.984 in (10)
  • 1.0 in (10)
  • 1.004 in (10)
  • 1.012 in (10)
  • 1.014 in (10)
  • 1.016 in (10)
  • 1.024 in (10)
  • 1.032 in (10)
  • 1.039 in (10)
  • 1.043 in (10)
  • 1.047 in (10)
  • 1.063 in (10)
  • 1.083 in (10)
  • 1.094 in (10)
  • 1.102 in (10)
  • 1.109 in (10)
  • 1.122 in (10)
  • 1.125 in (10)
  • 1.143 in (10)
  • 1.156 in (10)
  • 1.161 in (10)
  • 1.172 in (10)
  • 1.181 in (10)
  • 1.188 in (10)
  • 1.201 in (10)
  • 1.219 in (10)
  • 1.22 in (10)
  • 1.24 in (10)
  • 1.25 in (10)
  • 1.26 in (6)
  • 1.28 in (6)
  • 1.299 in (6)
  • 1.313 in (6)
  • 1.339 in (6)
  • 1.344 in (6)
  • 1.375 in (6)
  • 1.379 in (6)
  • 1.399 in (6)
  • 1.417 in (6)
  • 1.437 in (6)
  • 1.457 in (6)
  • 1.476 in (6)
  • 1.496 in (6)
  • 1.5 in (6)
  • 1.508 in (6)
  • 1.516 in (6)
  • 1.536 in (6)
  • 1.547 in (6)
  • 1.555 in (6)
  • 1.575 in (6)
Cutting Diameter Min до Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 16.0 mm (10)
  • 16.2 mm (10)
  • 16.276 mm (10)
  • 16.5 mm (10)
  • 16.675 mm (10)
  • 17.0 mm (10)
  • 17.075 mm (10)
  • 17.475 mm (10)
  • 17.5 mm (10)
  • 17.6 mm (10)
  • 17.8 mm (10)
  • 17.85 mm (10)
  • 18.0 mm (10)
  • 18.25 mm (10)
  • 18.5 mm (10)
  • 18.651 mm (10)
  • 18.8 mm (10)
  • 19.0 mm (10)
  • 19.05 mm (10)
  • 19.201 mm (10)
  • 19.276 mm (10)
  • 19.451 mm (10)
  • 19.5 mm (10)
  • 19.701 mm (10)
  • 19.85 mm (10)
  • 20.0 mm (10)
  • 20.1 mm (10)
  • 20.201 mm (10)
  • 20.25 mm (10)
  • 20.3 mm (10)
  • 20.401 mm (10)
  • 20.5 mm (10)
  • 20.6 mm (10)
  • 20.651 mm (10)
  • 20.701 mm (10)
  • 20.8 mm (10)
  • 20.901 mm (10)
  • 21.0 mm (10)
  • 21.425 mm (10)
  • 21.5 mm (10)
  • 22.0 mm (10)
  • 22.225 mm (10)
  • 22.451 mm (10)
  • 22.5 mm (10)
  • 23.0 mm (10)
  • 23.5 mm (10)
  • 23.8 mm (10)
  • 24.0 mm (10)
  • 24.5 mm (10)
  • 24.6 mm (10)
  • 25.0 mm (10)
  • 25.401 mm (10)
  • 25.5 mm (10)
  • 25.675 mm (10)
  • 25.701 mm (10)
  • 25.75 mm (10)
  • 25.8 mm (10)
  • 26.0 mm (10)
  • 26.201 mm (10)
  • 26.401 mm (10)
  • 26.5 mm (10)
  • 26.6 mm (10)
  • 27.0 mm (10)
  • 27.5 mm (10)
  • 27.776 mm (10)
  • 28.0 mm (10)
  • 28.175 mm (10)
  • 28.5 mm (10)
  • 28.576 mm (10)
  • 29.0 mm (10)
  • 29.375 mm (10)
  • 29.5 mm (10)
  • 29.776 mm (10)
  • 30.0 mm (10)
  • 30.175 mm (10)
  • 30.5 mm (10)
  • 30.951 mm (10)
  • 31.0 mm (10)
  • 31.5 mm (10)
  • 31.75 mm (10)
  • 32.0 mm (6)
  • 32.5 mm (6)
  • 33.0 mm (6)
  • 33.35 mm (6)
  • 34.0 mm (6)
  • 34.125 mm (6)
  • 34.926 mm (6)
  • 35.0 mm (6)
  • 35.5 mm (6)
  • 36.0 mm (6)
  • 36.5 mm (6)
  • 37.0 mm (6)
  • 37.5 mm (6)
  • 38.0 mm (6)
  • 38.1 mm (6)
  • 38.301 mm (6)
  • 38.5 mm (6)
  • 39.0 mm (6)
  • 39.301 mm (6)
  • 39.5 mm (6)
  • 40.0 mm (6)
Cutting Diameter Min до Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 26.0 mm (2)
  • 27.0 mm (2)
  • 29.0 mm (2)
  • 30.0 mm (2)
  • 32.0 mm (2)
  • 33.0 mm (2)
  • 35.0 mm (2)
  • 36.0 mm (2)
  • 38.0 mm (2)
  • 39.0 mm (2)
  • 41.0 mm (2)
  • 42.0 mm (2)
  • 44.0 mm (2)
  • 45.0 mm (2)
  • 47.0 mm (2)
  • 48.0 mm (2)
  • 51.0 mm (2)
  • 54.0 mm (2)
  • 57.0 mm (2)
  • 60.0 mm (2)
  • 63.0 mm (2)
  • 66.0 mm (2)
  • 69.0 mm (2)
  • 72.0 mm (2)
  • 75.0 mm (2)
  • 78.0 mm (2)
  • 81.0 mm (2)
  • 84.0 mm (2)
  • 85.0 mm (2)
  • 87.0 mm (2)
  • 90.0 mm (4)
  • 93.0 mm (2)
  • 95.0 mm (2)
  • 96.0 mm (2)
  • 100.0 mm (2)
  • 102.0 mm (2)
  • 105.0 mm (2)
  • 108.0 mm (2)
  • 110.0 mm (2)
  • 114.0 mm (2)
  • 115.0 mm (2)
  • 120.0 mm (4)
  • 125.0 mm (2)
  • 130.0 mm (2)
  • 135.0 mm (2)
  • 136.0 mm (2)
  • 140.0 mm (2)
  • 144.0 mm (2)
  • 145.0 mm (2)
  • 150.0 mm (2)
  • 152.0 mm (2)
  • 155.0 mm (2)
  • 160.0 mm (4)
  • 168.0 mm (2)
  • 170.0 mm (2)
  • 176.0 mm (2)
  • 180.0 mm (2)
  • 184.0 mm (2)
  • 190.0 mm (2)
  • 192.0 mm (2)
  • 200.0 mm (4)
  • 204.0 mm (2)
  • 208.0 mm (2)
  • 216.0 mm (4)
  • 224.0 mm (2)
  • 228.0 mm (2)
  • 232.0 mm (2)
  • 240.0 mm (4)
  • 248.0 mm (2)
  • 252.0 mm (2)
  • 256.0 mm (2)
  • 264.0 mm (2)
  • 272.0 mm (2)
  • 276.0 mm (2)
  • 288.0 mm (4)
  • 300.0 mm (2)
  • 304.0 mm (2)
  • 312.0 mm (2)
  • 320.0 mm (2)
  • 324.0 mm (2)
  • 336.0 mm (2)
  • 348.0 mm (2)
  • 360.0 mm (2)
  • 372.0 mm (2)
  • 384.0 mm (2)
Maximum Hole Depth [L4] Min до Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.024 in (2)
  • 1.063 in (2)
  • 1.143 in (2)
  • 1.181 in (2)
  • 1.26 in (2)
  • 1.299 in (2)
  • 1.379 in (2)
  • 1.417 in (2)
  • 1.496 in (2)
  • 1.536 in (2)
  • 1.614 in (2)
  • 1.655 in (2)
  • 1.732 in (2)
  • 1.772 in (2)
  • 1.85 in (2)
  • 1.891 in (2)
  • 2.008 in (2)
  • 2.126 in (2)
  • 2.244 in (2)
  • 2.362 in (2)
  • 2.48 in (2)
  • 2.598 in (2)
  • 2.717 in (2)
  • 2.835 in (2)
  • 2.953 in (2)
  • 3.071 in (2)
  • 3.189 in (2)
  • 3.307 in (2)
  • 3.346 in (2)
  • 3.426 in (2)
  • 3.543 in (4)
  • 3.661 in (2)
  • 3.74 in (2)
  • 3.781 in (2)
  • 3.938 in (2)
  • 4.016 in (2)
  • 4.134 in (2)
  • 4.252 in (2)
  • 4.331 in (2)
  • 4.488 in (2)
  • 4.529 in (2)
  • 4.724 in (4)
  • 4.921 in (2)
  • 5.118 in (2)
  • 5.315 in (2)
  • 5.354 in (2)
  • 5.513 in (2)
  • 5.67 in (2)
  • 5.71 in (2)
  • 5.906 in (2)
  • 5.984 in (2)
  • 6.102 in (2)
  • 6.299 in (4)
  • 6.614 in (2)
  • 6.694 in (2)
  • 6.929 in (2)
  • 7.087 in (2)
  • 7.244 in (2)
  • 7.48 in (2)
  • 7.559 in (2)
  • 7.875 in (4)
  • 8.031 in (2)
  • 8.189 in (2)
  • 8.504 in (4)
  • 8.819 in (2)
  • 8.976 in (2)
  • 9.134 in (2)
  • 9.449 in (4)
  • 9.764 in (2)
  • 9.921 in (2)
  • 10.079 in (2)
  • 10.394 in (2)
  • 10.709 in (2)
  • 10.866 in (2)
  • 11.339 in (4)
  • 11.811 in (2)
  • 11.969 in (2)
  • 12.283 in (2)
  • 12.598 in (2)
  • 12.756 in (2)
  • 13.228 in (2)
  • 13.701 in (2)
  • 14.173 in (2)
  • 14.646 in (2)
  • 15.118 in (2)
Maximum Hole Depth [L4] Min до Maximum Hole Depth [L4] Max
Connection Style
Connection Style
  • Cylindrical Shank 1 Flat (152)
  • Straight-Cylindrical w/Flange (32)
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WM15PD (184)
  • WP40PD (184)
frontEnd
Point Angle
Point Angle
  • 140.0 (184)
  • 150.0 (184)
Point Angle Min до Point Angle Max
backEnd
Back-End Diameter
Back-End Diameter
  • 19.05 mm (10)
  • 20.0 mm (10)
  • 25.0 mm (30)
  • 25.401 mm (30)
  • 31.75 mm (40)
  • 32.0 mm (40)
  • 38.1 mm (12)
  • 40.0 mm (12)
Back-End Diameter Min до Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.75 in (10)
  • 0.787 in (10)
  • 0.984 in (30)
  • 1.0 in (30)
  • 1.25 in (40)
  • 1.26 in (40)
  • 1.5 in (12)
  • 1.575 in (12)
Back-End Diameter Min до Back-End Diameter Max
No filters matching ""
Показать ассортимент в
Метрическая система
Дюймовая система

ОРИГИНАЛЬНЫЙ ПРОДУКТ

TOP DRILL™ Modular X • 3 x D • Side Lock Shank • Inch TOP DRILL™ Modular X • 3 x D • Side Lock Shank • Inch

TDMX • 3 x D • Side Lock Shank • Inch
(20 Products)
  • DrillingDrilling
  • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
  • Drilling: Inclined EntryDrilling: Inclined Entry
  • Drilling: Inclined ExitDrilling: Inclined Exit
  • Drilling: Stacked PlatesDrilling: Stacked Plates
  • Shank - Cylindrical with FlatShank - Cylindrical with Flat
  • 3851338513
  • Drilling - Through CoolantDrilling - Through Coolant
Посмотреть ассортимент
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [SSC] Insert Seat Size [D1] Drill Diameter M [D1] Drill Diameter M [D1MAX] Drill Diameter Maximum [D1MAX] Drill Diameter Maximum [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L1] Insert Gage Length [L1] Insert Gage Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth
6572186 TDMX0630R3SL075 TDMX0630R3SL075   A 16.0000 .6300 16.9990 .6692 50.0 1.968 19.05 .75 131.0000 5.157 81.0000 3.189 51.0000 2.007
    Цена по прейскуранту:
    $270.25 /каждый
    Ваша цена::
    6572189 TDMX0749R3SL100 TDMX0749R3SL100   D 19.0000 .7481 19.9990 .7874 56.0 2.204 25.4 1.0 151.0000 5.944 95.0000 3.740 60.0000 2.362
      Цена по прейскуранту:
      $369.53 /каждый
      Ваша цена::
      6572190 TDMX0788R3SL100 TDMX0788R3SL100   E 20.0000 .7875 20.9990 .8267 56.0 2.204 25.4 1.0 155.0000 6.102 99.0000 3.897 63.0000 2.480
        Цена по прейскуранту:
        $369.53 /каждый
        Ваша цена::
        6572191 TDMX0827R3SL100 TDMX0827R3SL100   F 21.0000 .8268 21.9990 .8661 56.0 2.204 25.4 1.0 160.0000 6.299 104.0000 4.094 66.0000 2.598
          Цена по прейскуранту:
          $430.20 /каждый
          Ваша цена::
          6572192 TDMX0867R3SL100 TDMX0867R3SL100   G 22.0000 .8662 22.9990 .9055 56.0 2.204 25.4 1.0 164.0000 6.456 108.0000 4.252 69.0000 2.716
            Цена по прейскуранту:
            $430.20 /каждый
            Ваша цена::
            6572195 TDMX0985R3SL125 TDMX0985R3SL125   J 25.0000 .9843 25.9990 1.023 60.0 2.362 31.75 1.25 182.0000 7.165 122.0000 4.803 78.0000 3.070
              Цена по прейскуранту:
              $523.95 /каждый
              Ваша цена::
              Цена по прейскуранту:
              Скидка: %
              Ваша цена::
              Замена Данный товар недоступен
              Продукция для замены Данный товар можно приобрести у дистрибьютора

              ОРИГИНАЛЬНЫЙ ПРОДУКТ

              TOP DRILL™ Modular X • 3 x D • Side Lock Shank • Metric TOP DRILL™ Modular X • 3 x D • Side Lock Shank • Metric

              TDMX • 3 x D • Side Lock Shank • Metric
              (20 Products)
              • DrillingDrilling
              • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
              • Drilling: Inclined EntryDrilling: Inclined Entry
              • Drilling: Inclined ExitDrilling: Inclined Exit
              • Drilling: Stacked PlatesDrilling: Stacked Plates
              • Shank - Cylindrical with FlatShank - Cylindrical with Flat
              • 3851338513
              • Drilling - Through CoolantDrilling - Through Coolant
              Посмотреть ассортимент
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [SSC] Insert Seat Size [D1] Drill Diameter M [D1] Drill Diameter M [D1MAX] Drill Diameter Maximum [D1MAX] Drill Diameter Maximum [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L1] Insert Gage Length [L1] Insert Gage Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth
              6572093 TDMX180R3SL25M TDMX180R3SL25M   C 18.0000 .7087 18.9990 .7480 56.0 2.204 25.0 .9843 146.0000 5.748 90.0000 3.543 57.0000 2.244
                Цена по прейскуранту:
                $319.88 /каждый
                Ваша цена::
                6572100 TDMX240R3SL32M TDMX240R3SL32M   I 24.0000 .9449 24.9990 .9842 60.0 2.362 32.0 1.259 177.0000 6.968 117.0000 4.606 75.0000 2.952
                  Цена по прейскуранту:
                  $474.31 /каждый
                  Ваша цена::
                  6572101 TDMX250R3SL32M TDMX250R3SL32M   J 25.0000 .9843 25.9990 1.023 60.0 2.362 32.0 1.259 182.0000 7.165 122.0000 4.803 78.0000 3.070
                    Цена по прейскуранту:
                    $523.95 /каждый
                    Ваша цена::
                    6572104 TDMX270R3SL32M TDMX270R3SL32M   L 27.0000 1.063 27.9990 1.102 60.0 2.362 32.0 1.259 191.0000 7.519 131.0000 5.157 84.0000 3.307
                      Цена по прейскуранту:
                      $579.10 /каждый
                      Ваша цена::
                      6572107 TDMX300R3SL32M TDMX300R3SL32M   O 30.0000 1.181 30.9990 1.220 60.0 2.362 32.0 1.259 204.0000 8.031 144.0000 5.669 93.0000 3.661
                        Цена по прейскуранту:
                        $634.26 /каждый
                        Ваша цена::
                        6572109 TDMX320R3SL40M TDMX320R3SL40M