Welcome
Please confirm your preferences
Update Preferences

Предложения по продукции

Product Family suggestions

WIDIA At Your Service

Have a Product Specific Question?

See a full list of Global Service Professionals by expertise area

Quick Order
Позиции успешно добавлено в корзину
View Cart
Back to Solution

Editing Solution

Adding Solution

Solution Name: {{SolutionName}}

Корпуса инструментов

Выбрать фильтры
Filters
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (36)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (36)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (36)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (36)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (36)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (36)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (36)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (36)
  • M Stainless Steel (36)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (36)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (36)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (36)
  • K Cast Iron (36)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (36)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (36)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (36)
  • N Non-Ferrous Materials (36)
    • N1
      Wrought Aluminum
      (36)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (36)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (36)
  • S High-Temp Alloys (36)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (36)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (36)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (36)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (36)
  • H Hardened Materials (36)
    • H1
      Hardened Materials 44-48 HRC
      (36)
    • H2
      Hardened Materials 48-55 HRC
      (36)
    • H3
      Hardened Materials 56-60 HRC
      (36)
Select All Star
  • CN (5)
  • DE (16)
  • SG (2)
  • US (6)
Applications
Applications
  • Face Milling Face Milling (37)
  • Pocket Pocket (37)
  • Pocket Helical Pocket Helical (37)
  • Pocket Milling Pocket Milling (37)
  • Profile Milling Profile Milling (37)
  • Ramping Ramping (37)
  • Shoulder Ball Nose Shoulder Ball Nose (37)
  • Shoulder Milling Shoulder Milling (37)
  • Slot Milling Slot Milling (37)
  • Slot Square End Slot Square End (37)
Cutting Diameter
Cutting Diameter
  • 0.315 in (3)
  • 0.356 in (1)
  • 0.394 in (2)
  • 0.435 in (1)
  • 0.473 in (1)
  • 0.582 in (1)
  • 0.591 in (1)
  • 0.63 in (3)
  • 0.779 in (1)
  • 0.787 in (1)
  • 0.906 in (1)
  • 1.102 in (1)
  • 1.339 in (2)
  • 1.37 in (1)
  • 1.417 in (1)
  • 1.496 in (1)
  • 1.53 in (1)
  • 1.575 in (1)
  • 1.85 in (2)
  • 1.969 in (1)
  • 2.008 in (1)
  • 2.52 in (2)
  • 2.677 in (1)
  • 3.307 in (2)
  • 3.465 in (1)
  • 4.291 in (2)
  • 5.67 in (1)
Cutting Diameter Min до Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 8.0 mm (3)
  • 9.05 mm (1)
  • 10.0 mm (2)
  • 11.05 mm (1)
  • 12.0 mm (1)
  • 14.775 mm (1)
  • 15.0 mm (1)
  • 16.0 mm (3)
  • 19.776 mm (1)
  • 20.0 mm (1)
  • 23.0 mm (1)
  • 28.0 mm (1)
  • 34.0 mm (2)
  • 34.801 mm (1)
  • 36.0 mm (1)
  • 38.0 mm (1)
  • 38.85 mm (1)
  • 40.0 mm (1)
  • 47.0 mm (2)
  • 50.0 mm (1)
  • 51.0 mm (1)
  • 64.0 mm (2)
  • 68.0 mm (1)
  • 84.0 mm (2)
  • 88.0 mm (1)
  • 109.0 mm (2)
  • 144.0 mm (1)
Cutting Diameter Min до Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 16.0 mm (3)
  • 19.05 mm (2)
  • 20.0 mm (2)
  • 24.0 mm (1)
  • 25.0 mm (1)
  • 25.401 mm (1)
  • 26.0 mm (2)
  • 30.0 mm (1)
  • 31.75 mm (1)
  • 32.0 mm (1)
  • 35.0 mm (1)
  • 40.0 mm (1)
  • 50.0 mm (3)
  • 50.801 mm (2)
  • 52.0 mm (2)
  • 63.0 mm (3)
  • 66.0 mm (1)
  • 80.0 mm (3)
  • 100.0 mm (3)
  • 125.0 mm (2)
  • 160.0 mm (1)
Maximum Cutting Diameter Min до Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.63 in (3)
  • 0.75 in (2)
  • 0.787 in (2)
  • 0.946 in (1)
  • 0.984 in (1)
  • 1.0 in (1)
  • 1.024 in (2)
  • 1.181 in (1)
  • 1.25 in (1)
  • 1.26 in (1)
  • 1.379 in (1)
  • 1.575 in (1)
  • 1.969 in (3)
  • 2.0 in (2)
  • 2.047 in (2)
  • 2.48 in (3)
  • 2.598 in (1)
  • 3.15 in (3)
  • 3.938 in (3)
  • 4.921 in (2)
  • 6.299 in (1)
Maximum Cutting Diameter Min до Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 4.0 mm (4)
  • 5.0 mm (7)
  • 6.0 mm (11)
  • 8.0 mm (15)
Cutting Length Min до Cutting Length Max
Cutting Length
Cutting Length
  • 0.157 in (4)
  • 0.197 in (7)
  • 0.237 in (11)
  • 0.315 in (15)
Cutting Length Min до Cutting Length Max
Reach
Reach
  • 1.181 in (2)
  • 1.575 in (14)
  • 1.631 in (2)
  • 1.969 in (8)
  • 2.4 in (1)
  • 2.48 in (1)
  • 3.15 in (3)
  • 3.19 in (1)
  • 3.228 in (1)
  • 3.86 in (1)
  • 4.0 in (1)
  • 4.921 in (2)
Reach Min до Reach Max
Reach
Reach
  • 30.0 mm (2)
  • 40.0 mm (14)
  • 41.401 mm (2)
  • 50.0 mm (8)
  • 60.95 mm (1)
  • 63.0 mm (1)
  • 80.0 mm (3)
  • 81.025 mm (1)
  • 82.0 mm (1)
  • 98.051 mm (1)
  • 101.601 mm (1)
  • 125.0 mm (2)
Reach Min до Reach Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (7)
  • B-Cutter Retention Screw (12)
  • SHCS or RetScrw Or BoltCircle (1)
  • Screw-On Connection (5)
  • Weldon (12)
Number of Flutes
Number of Flutes
  • 2 (14)
  • 3 (2)
  • 4 (8)
  • 5 (5)
  • 6 (4)
  • 7 (2)
  • 8 (1)
  • 9 (1)
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.157 in (4)
  • 0.197 in (7)
  • 0.237 in (11)
  • 0.315 in (15)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 4.0 mm (4)
  • 5.0 mm (7)
  • 6.0 mm (11)
  • 8.0 mm (15)
Corner Radius Min до Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (36)
  • TN2510 (36)
  • TN25M (17)
  • TN450 (36)
  • TN5015 (8)
  • TN5020 (8)
  • TN5515 (36)
  • TN6525 (36)
  • TN6540 (36)
  • TN7015 (8)
  • TN7035 (8)
  • TN7110 (8)
  • TN7115 (1)
  • TN7135 (9)
  • TN7525 (36)
  • TN7535 (36)
  • TTI25 (36)
  • TTM (23)
  • TTM08 (24)
  • TTM09 (4)
  • WK15CM (19)
  • WP35CM (36)
  • WS30PM (11)
  • WS40PM (11)
Maximum Ramp Angle
Maximum Ramp Angle
  • 1.25 (1)
  • 1.75 (1)
  • 2.25 (1)
  • 2.5 (1)
  • 2.75 (2)
  • 3.5 (1)
  • 3.75 (2)
  • 4.0 (1)
  • 4.5 (1)
  • 4.75 (1)
  • 5.75 (1)
  • 6.0 (1)
  • 6.5 (1)
  • 6.75 (1)
  • 7.0 (1)
  • 7.5 (3)
  • 7.75 (2)
  • 8.25 (1)
  • 8.75 (1)
  • 10.0 (2)
  • 10.25 (2)
  • 10.75 (1)
  • 12.0 (1)
  • 13.5 (1)
  • 14.25 (1)
  • 15.75 (1)
  • 22.0 (1)
  • 23.0 (1)
  • 40.0 (1)
  • 50.0 (1)
Maximum Ramp Angle Min до Maximum Ramp Angle Max
frontEnd
Center Cutting
Center Cutting
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (12)
  • SCREW-ON (5)
  • SHELL MILL (20)
Back-End Diameter
Back-End Diameter
  • 16.0 mm (1)
  • 19.05 mm (3)
  • 20.0 mm (2)
  • 22.0 mm (7)
  • 25.0 mm (2)
  • 25.401 mm (2)
  • 27.0 mm (7)
  • 28.0 mm (3)
  • 31.75 mm (1)
  • 32.0 mm (6)
  • 40.0 mm (3)
Back-End Diameter Min до Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.63 in (1)
  • 0.75 in (3)
  • 0.787 in (2)
  • 0.866 in (7)
  • 0.984 in (2)
  • 1.0 in (2)
  • 1.063 in (7)
  • 1.102 in (3)
  • 1.25 in (1)
  • 1.26 in (6)
  • 1.575 in (3)
Back-End Diameter Min до Back-End Diameter Max
No filters matching ""
Сузить поиск по категориям:
Показать ассортимент в
Метрическая система
Дюймовая система

ОРИГИНАЛЬНЫЙ ПРОДУКТ

M100 • Хвостовик Weldon™ RD1605.. M100 • Хвостовик Weldon™ RD1605..

Фрезы с хвостовиком Weldon® • RD1605..
(1 Products)
  • Shank - Cylindrical Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
  • 3D Profiling3D Profiling
  • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
  • Slotting: Square EndSlotting: Square End
  • Face MillingFace Milling
  • Ramping: BlankRamping: Blank
  • PocketingPocketing
  • Helical MillingHelical Milling
  • Milling - Through CoolantMilling - Through Coolant
Посмотреть ассортимент
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
2021341 12391013800 12391013800 W   32.0000 1.259 16.0000 .6299 32.0 1.259 142.0000 5.590 82.0000 3.228 8.0000 .3150 2 7.750 19000 Y 1.10
    Цена по прейскуранту:
    $454.31 /каждый
    Ваша цена::
    Цена по прейскуранту:
    Скидка: %
    Ваша цена::
    Замена Данный товар недоступен
    Продукция для замены Данный товар можно приобрести у дистрибьютора

    ОРИГИНАЛЬНЫЙ ПРОДУКТ

    M100 • Shell Mills • iC12 • Inch M100 • Shell Mills • iC12 • Inch

    Shell Mills • Inch
    (1 Products)
    • Milling - Side and FaceMilling - Side and Face
    • 3D Profiling3D Profiling
    • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
    • Slotting: Square EndSlotting: Square End
    • Face MillingFace Milling
    • Ramping: BlankRamping: Blank
    • PocketingPocketing
    • Helical MillingHelical Milling
    • Milling - Through CoolantMilling - Through Coolant
    Посмотреть ассортимент
    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms Weight Pounds
    2646725 M100D200Z05S075RD12 M100D200Z05S075RD12 W   50.8000 2.000 38.8620 1.530 19.05 .75 43.1800 1.700 41.4020 1.630 6.0000 .2362 5 10.000 15000 Y 0.25 0.55
      Цена по прейскуранту:
      $422.58 /каждый
      Ваша цена::
      Цена по прейскуранту:
      Скидка: %
      Ваша цена::
      Замена Данный товар недоступен
      Продукция для замены Данный товар можно приобрести у дистрибьютора

      ОРИГИНАЛЬНЫЙ ПРОДУКТ

      M100 • Насадные фрезы RD1204.. M100 • Насадные фрезы RD1204..

      M100 iC12 • Насадные фрезы
      (5 Products)
      • Milling - Side and FaceMilling - Side and Face
      • 3D Profiling3D Profiling
      • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
      • Slotting: Square EndSlotting: Square End
      • Face MillingFace Milling
      • Ramping: BlankRamping: Blank
      • PocketingPocketing
      • Helical MillingHelical Milling
      • Milling - Through CoolantMilling - Through Coolant
      Посмотреть ассортимент
      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
      2021342 12391020000 12391020000 W   50.0000 1.968 38.0000 1.496 22.0 .8661 40.0000 1.575 40.0000 1.574 6.0000 .2362 4 6.750 15000 Y 0.20
        Цена по прейскуранту:
        $559.21 /каждый
        Ваша цена::
        2021343 12391020200 12391020200 W   63.0000 2.480 51.0000 2.007 27.0 1.063 48.0000 1.890 40.0000 1.574 6.0000 .2362 5 4.500 14000 Y 0.30
          Цена по прейскуранту:
          $578.14 /каждый
          Ваша цена::
          2021344 12391020400 12391020400 W   80.0000 3.150 68.0000 2.677 27.0 1.063 60.0000 2.362 50.0000 1.968 6.0000 .2362 6 3.500 12000 Y 0.90
            Цена по прейскуранту:
            $760.07 /каждый
            Ваша цена::
            2021345 12391020600 12391020600 W   100.0000 3.937 88.0000 3.464 32.0 1.259 78.0000 3.071 50.0000 1.968 6.0000 .2362 6 2.500 11000 N 1.20
              Цена по прейскуранту:
              $790.47 /каждый
              Ваша цена::
              2021361 12391024000 12391024000 W   52.0000 2.047 40.0000 1.575 22.0 .8661 40.0000 1.575 40.0000 1.575 6.0000 .2360 4 6.500 15000 Y 0.20
                Цена по прейскуранту:
                $576.24 /каждый
                Ваша цена::
                Цена по прейскуранту:
                Скидка: %
                Ваша цена::
                Замена Данный товар недоступен
                Продукция для замены Данный товар можно приобрести у дистрибьютора

                ОРИГИНАЛЬНЫЙ ПРОДУКТ

                M100 • Weldon® End Mills • iC08 • Inch M100 • Weldon® End Mills • iC08 • Inch

                Weldon® End Mills • Inch
                (1 Products)
                • Shank - Cylindrical Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
                • 3D Profiling3D Profiling
                • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                • Slotting: Square EndSlotting: Square End
                • Face MillingFace Milling
                • Ramping: BlankRamping: Blank
                • PocketingPocketing
                • Helical MillingHelical Milling
                • Milling - Through CoolantMilling - Through Coolant
                Посмотреть ассортимент
                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                2646596 M100D075Z02W075RD08L453 M100D075Z02W075RD08L453 W   19.0500 .7500 11.0490 .4350 19.05 .75 115.0620 4.530 63.5000 2.500 4.0000 .1575 2 22.000 26000 Y 0.85
                  Цена по прейскуранту:
                  $269.57 /каждый
                  Ваша цена::
                  Цена по прейскуранту:
                  Скидка: %
                  Ваша цена::
                  Замена Данный товар недоступен
                  Продукция для замены Данный товар можно приобрести у дистрибьютора

                  ОРИГИНАЛЬНЫЙ ПРОДУКТ

                  M100 • Weldon® End Mills • iC12 • Inch M100 • Weldon® End Mills • iC12 • Inch

                  Weldon® End Mills • Inch
                  (2 Products)
                  • Shank - Cylindrical Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
                  • 3D Profiling3D Profiling
                  • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                  • Slotting: Square EndSlotting: Square End
                  • Face MillingFace Milling
                  • Ramping: BlankRamping: Blank
                  • PocketingPocketing
                  • Helical MillingHelical Milling
                  • Milling - Through CoolantMilling - Through Coolant
                  Посмотреть ассортимент
                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms Weight Pounds
                  2646611 M100D100Z02W100RD12L553 M100D100Z02W100RD12L553 W   25.4000 1.000 14.7830 .5280 25.4 1.0 140.4620 5.530 82.5500 3.250 6.0000 .2362 2 50.000 23000 Y 0.57 1.25
                    Цена по прейскуранту:
                    $327.88 /каждый
                    Ваша цена::
                    2646617 M100D125Z02W125RD12L615 M100D125Z02W125RD12L615 W   31.7500 1.250 19.7810 .7780 31.75 1.25 156.2100 6.150 98.2980 3.870 6.0000 .2362 2 23.000 19000 Y 0.73 1.60
                      Цена по прейскуранту:
                      $335.16 /каждый
                      Ваша цена::
                      Цена по прейскуранту:
                      Скидка: %
                      Ваша цена::
                      Замена Данный товар недоступен
                      Продукция для замены Данный товар можно приобрести у дистрибьютора

                      ОРИГИНАЛЬНЫЙ ПРОДУКТ

                      M100 • Shell Mills • iC16 • Inch M100 • Shell Mills • iC16 • Inch

                      Shell Mills • Inch
                      (1 Products)
                      • Milling - Side and FaceMilling - Side and Face
                      • 3D Profiling3D Profiling
                      • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                      • Slotting: Square EndSlotting: Square End
                      • Face MillingFace Milling
                      • Ramping: BlankRamping: Blank
                      • PocketingPocketing
                      • Helical MillingHelical Milling
                      • Milling - Through CoolantMilling - Through Coolant
                      Посмотреть ассортимент
                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms Weight Pounds
                      2646723 M100D200Z04S075RC16 M100D200Z04S075RC16 W   50.8000 2.000 34.7980 1.370 19.05 .75 43.1800 1.700 41.4020 1.630 8.0000 .3150 4 12.000 15000 Y 0.27 0.60
                        Цена по прейскуранту:
                        $422.58 /каждый
                        Ваша цена::
                        Цена по прейскуранту:
                        Скидка: %
                        Ваша цена::
                        Замена Данный товар недоступен
                        Продукция для замены Данный товар можно приобрести у дистрибьютора

                        ОРИГИНАЛЬНЫЙ ПРОДУКТ

                        M100 • Насадные фрезы RC1606.. M100 • Насадные фрезы RC1606..

                        Насадные фрезы • RC1606..
                        (8 Products)
                        • Milling - Side and FaceMilling - Side and Face
                        • 3D Profiling3D Profiling
                        • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                        • Slotting: Square EndSlotting: Square End
                        • Face MillingFace Milling
                        • Ramping: BlankRamping: Blank
                        • PocketingPocketing
                        • Helical MillingHelical Milling
                        • Milling - Through CoolantMilling - Through Coolant
                        Посмотреть ассортимент
                        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D4] Bolt Circle 4 [D4] Bolt Circle 3 [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                        2021352 12391022000 12391022000 W   80.0000 3.150 64.0000 2.519 27.0 1.063     60.0000 2.362 50.0000 1.968 8.0000 .3150 6 2.750 10000 Y 0.90
                          Цена по прейскуранту:
                          $729.15 /каждый
                          Ваша цена::
                          2021353 12391022200 12391022200 W   100.0000 3.937 84.0000 3.307 32.0 1.259     78.0000 3.071 50.0000 1.968 8.0000 .3150 7 2.250 9000 N 1.20
                            Цена по прейскуранту:
                            $828.68 /каждый
                            Ваша цена::
                            2021354 12391022400 12391022400 W   125.0000 4.921 109.0000 4.291 40.0 1.574     89.0000 3.504 50.0000 1.968 8.0000 .3150 8 1.750 8000 N 1.80
                              Цена по прейскуранту:
                              $990.82 /каждый
                              Ваша цена::
                              2021355 12391022600 12391022600 W   160.0000 6.299