Корпуса инструментов

Выбрать фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (30)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (30)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (30)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (30)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (30)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (30)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (30)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (30)
  • M Stainless Steel (30)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (30)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (30)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (30)
  • K Cast Iron (30)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (30)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (30)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (30)
  • N Non-Ferrous Materials (30)
    • N1
      Wrought Aluminum (30)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (30)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (30)
  • S High-Temp Alloys (30)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (30)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (30)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (30)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (30)
  • H Hardened Materials (30)
    • H1
      Hardened Materials 44-48 HRC (30)
Applications
Applications
  • Face Milling Face Milling (30)
  • Pocket Pocket (30)
  • Pocket Milling Pocket Milling (30)
  • Profile Milling Profile Milling (30)
  • Shoulder Ball Nose Shoulder Ball Nose (30)
  • Shoulder Milling Shoulder Milling (30)
  • Shoulder Roughing Shoulder Roughing (30)
  • Slot Milling Slot Milling (30)
  • Slot Square End Slot Square End (30)
Cutting Diameter
Cutting Diameter
  • 0.591 in (5)
  • 0.606 in (4)
  • 0.709 in (1)
  • 0.856 in (4)
  • 0.866 in (4)
  • 0.984 in (1)
  • 1.106 in (3)
  • 1.181 in (2)
  • 1.26 in (1)
  • 1.575 in (2)
  • 1.606 in (2)
  • 1.655 in (1)
Cutting Diameter Min до Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.0 mm (5)
  • 15.4 mm (4)
  • 18.0 mm (1)
  • 21.75 mm (4)
  • 22.0 mm (4)
  • 25.0 mm (1)
  • 28.1 mm (3)
  • 30.0 mm (2)
  • 32.0 mm (1)
  • 40.0 mm (2)
  • 40.801 mm (2)
  • 42.0 mm (1)
Cutting Diameter Min до Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 25.0 mm (5)
  • 25.401 mm (4)
  • 28.0 mm (1)
  • 31.75 mm (4)
  • 32.0 mm (4)
  • 35.0 mm (1)
  • 38.1 mm (3)
  • 40.0 mm (2)
  • 42.0 mm (1)
  • 50.0 mm (2)
  • 50.801 mm (2)
  • 52.0 mm (1)
Maximum Cutting Diameter Min до Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.984 in (5)
  • 1.0 in (4)
  • 1.102 in (1)
  • 1.25 in (4)
  • 1.26 in (4)
  • 1.379 in (1)
  • 1.5 in (3)
  • 1.575 in (2)
  • 1.655 in (1)
  • 1.969 in (2)
  • 2.0 in (2)
  • 2.047 in (1)
Maximum Cutting Diameter Min до Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 4.95 mm (17)
  • 5.0 mm (13)
Cutting Length Min до Cutting Length Max
Cutting Length
Cutting Length
  • 0.195 in (17)
  • 0.197 in (13)
Cutting Length Min до Cutting Length Max
Reach
Reach
  • 1.25 in (1)
  • 1.26 in (5)
  • 1.5 in (6)
  • 1.57 in (2)
  • 1.575 in (11)
  • 1.969 in (1)
  • 2.0 in (4)
Reach Min до Reach Max
Reach
Reach
  • 31.75 mm (1)
  • 32.0 mm (5)
  • 38.1 mm (6)
  • 39.875 mm (2)
  • 40.0 mm (11)
  • 50.0 mm (1)
  • 50.801 mm (4)
Reach Min до Reach Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (9)
  • Screw-On Connection (8)
  • Straight-Cylindrical (9)
  • Weldon (4)
Number of Flutes
Number of Flutes
  • 3 (15)
  • 4 (6)
  • 5 (4)
  • 6 (5)
Over All Length [L]
Over All Length [L]
  • 1.57 in (2)
  • 1.575 in (4)
  • 1.969 in (1)
  • 2.0 in (2)
  • 3.504 in (1)
  • 3.976 in (1)
  • 4.28 in (2)
  • 5.906 in (2)
  • 6.0 in (1)
  • 7.875 in (3)
  • 8.0 in (1)
  • 9.0 in (1)
  • 9.843 in (1)
Over All Length [L] Min до Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 39.875 mm (2)
  • 40.0 mm (4)
  • 50.0 mm (1)
  • 50.801 mm (2)
  • 89.0 mm (1)
  • 101.0 mm (1)
  • 108.7 mm (2)
  • 150.0 mm (2)
  • 152.4 mm (1)
  • 200.0 mm (3)
  • 203.201 mm (1)
  • 228.601 mm (1)
  • 250.0 mm (1)
Over All Length [L] Min до Over All Length [L] Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WK15CM (30)
  • WN25PM (30)
  • WP20CM (30)
  • WP25PM (30)
  • WP35CM (30)
  • WP40PM (30)
  • WS30PM (30)
  • WS40PM (30)
  • WU35PM (30)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.31 (2)
  • 0.32 (3)
  • 0.37 (2)
  • 0.38 (1)
  • 0.39 (1)
  • 0.4 (1)
  • 0.41 (1)
  • 0.45 (1)
  • 0.49 (8)
  • 0.55 (1)
  • 0.6 (9)
Maximum Ramp Angle Min до Maximum Ramp Angle Max
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (13)
  • SCREW-ON (8)
  • SHELL MILL (9)
Back-End Diameter
Back-End Diameter
  • 12.701 mm (2)
  • 16.0 mm (2)
  • 19.05 mm (2)
  • 21.0 mm (2)
  • 22.0 mm (3)
  • 25.0 mm (4)
  • 25.401 mm (3)
  • 29.0 mm (6)
  • 31.701 mm (2)
  • 32.0 mm (4)
Back-End Diameter Min до Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.5 in (2)
  • 0.63 in (2)
  • 0.75 in (2)
  • 0.828 in (2)
  • 0.866 in (3)
  • 0.984 in (4)
  • 1.0 in (3)
  • 1.143 in (6)
  • 1.248 in (2)
  • 1.26 in (4)
Back-End Diameter Min до Back-End Diameter Max
No filters matching ""
Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
product-image
Please adjust the following properties from

Номер по каталогу ISO

Номер по каталогу ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
Session expired due to inactivity, please login again
Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
товар(-ы) успешно добавлен(-ы) в корзину

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Номер по каталогу ISO Сплав    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?