Country

Language

Unit of Measure

Цена по прейскуранту:

Скидка: %

Цена по прейскуранту:

$282.11 /каждый

Ваша цена::

Кол-во

M100 • Weldon® End Mills • iC08 • Inch

Name: M100 • Weldon® End Mills • iC08 • Inch
SKU: 2646596
Rating: 0 (0 reviews)

Weldon® End Mills • Inch

Метрическая система

Дюймовая система

SAP Material Number	2646596
ISO Catalog Number	M100D075Z02W075RD08L453
ANSI Catalog Number	M100D075Z02W075RD08L453
Grade	W
[D1MAX] Maximum Cutting Diameter	19.05 mm
[D1MAX] Maximum Cutting Diameter	.75 in
[D1] Effective Cutting Diameter	11.049 mm
[D1] Effective Cutting Diameter	.435 in
[D] Adapter / Shank / Bore Diameter	19.05 mm
[D] Adapter / Shank / Bore Diameter	.75 in
[L] Overall Length	115.062 mm
[L] Overall Length	4.53 in
[L2] Head Length	63.5 mm
[L2] Head Length	2.5 in
[AP1MAX] 1st Maximum Cutting Depth	4 mm
[AP1MAX] 1st Maximum Cutting Depth	.1575 in
Number of Inserts	2
Maximum Ramping Angle	22
Max RPM	26000
Coolant Supply	Y
Weight Pounds	0.85

Посмотреть все варианты продукции

Использование и область применения

Face Milling
Helical Milling
Ramping: Blank
Slotting: Square End
Side Milling/Shoulder Milling: Ball Nose
3D Profiling
Milling - Through Coolant
Shank - Cylindrical Weldon 2 Flat
Pocketing

Обрабатываемый материал

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

H Hardened Materials

Характеристики и преимущества

General purpose face and copy milling.

Со стороны станка

загрузка...

Со стороны заготовки

загрузка...

Insert Selection Guide

	Light Machining		General Purpose		Heavy Machining
Material Group	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	RDMT-T	WP35CM	RDMT-T	WP35CM	RDMT-T	WP35CM
P3–P4	RDMT-T	WP35CM	RDMW-T	TN6540	RDMW-T	TN6540
P5–P6	RDMT-T	WP35CM	RDMT-T	WP35CM	RDMT-T	WP35CM
M1–M2	RDHT-T	WP35CM	RDHT-T	WP35CM	RDMT-T	WP35CM
M3	RDHT-T	WP35CM	RDHT-T	WP35CM	RDMT-T	WP35CM
K1–K2	–	–	RDMT-T	WP35CM	RDMT-T	WP35CM
K3	–	–	RDMT-T	WP35CM	RDMT-T	WP35CM
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	–	–	–	–	–	–
H1	–	–	–	–	–	–

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
RDMW-	0,19	0,29	0,42	0,14	0,21	0,30	0,10	0,16	0,23	0,09	0,14	0,20	0,08	0,13	0,18	RDMW-
RDHT-T	0,23	0,31	0,63	0,17	0,23	0,45	0,13	0,17	0,34	0,11	0,15	0,29	0,10	0,14	0,27	RDHT-T
RDMT-T	0,23	0,31	0,63	0,17	0,23	0,45	0,13	0,17	0,34	0,11	0,15	0,29	0,10	0,14	0,27	RDMT-T
RDMW-T	0,23	0,42	0,73	0,17	0,30	0,53	0,13	0,23	0,39	0,11	0,20	0,34	0,10	0,18	0,32	RDMW-T

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
RDMW-	0,22	0,34	0,48	0,16	0,24	0,35	0,12	0,18	0,26	0,10	0,16	0,23	0,09	0,15	0,21	RDMW-
RDHT-T	0,27	0,36	0,72	0,19	0,26	0,52	0,14	0,20	0,39	0,13	0,17	0,34	0,12	0,16	0,31	RDHT-T
RDMT-T	0,27	0,36	0,72	0,19	0,26	0,52	0,14	0,20	0,39	0,13	0,17	0,34	0,12	0,16	0,31	RDMT-T
RDMW-T	0,27	0,48	0,85	0,19	0,35	0,61	0,14	0,26	0,46	0,13	0,23	0,40	0,12	0,21	0,36	RDMW-T

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
RDMW-	0,39	0,60	0,87	0,28	0,44	0,62	0,21	0,33	0,47	0,18	0,28	0,41	0,17	0,26	0,37	RDMW-
RDHT-T	0,48	0,65	1,31	0,35	0,47	0,94	0,26	0,35	0,70	0,23	0,30	0,61	0,21	0,28	0,56	RDHT-T
RDMT-T	0,48	0,65	1,31	0,35	0,47	0,94	0,26	0,35	0,70	0,23	0,30	0,61	0,21	0,28	0,56	RDMT-T
RDMW-T	0,48	0,87	1,54	0,35	0,62	1,10	0,26	0,47	0,82	0,23	0,41	0,71	0,21	0,37	0,65	RDMW-T

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
RDMW-	0,28	0,44	0,63	0,20	0,32	0,46	0,15	0,24	0,34	0,13	0,21	0,30	0,12	0,19	0,27	RDMW-
RDHT-T	0,35	0,47	0,95	0,25	0,34	0,69	0,19	0,26	0,51	0,17	0,22	0,45	0,15	0,20	0,41	RDHT-T
RDMT-T	0,35	0,47	0,95	0,25	0,34	0,69	0,19	0,26	0,51	0,17	0,22	0,45	0,15	0,20	0,41	RDMT-T
RDMW-T	0,35	0,63	1,12	0,25	0,46	0,80	0,19	0,34	0,60	0,17	0,30	0,52	0,15	0,27	0,48	RDMW-T

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
RDMW-	.007	.011	.016	.005	.008	.012	.004	.006	.009	.003	.005	.008	.003	.005	.007	RDMW-
RDHT-T	.009	.012	.024	.007	.009	.018	.005	.007	.013	.004	.006	.011	.004	.005	.011	RDHT-T
RDMT-T	.009	.012	.024	.007	.009	.018	.005	.007	.013	.004	.006	.011	.004	.005	.011	RDMT-T
RDMW-T	.009	.016	.028	.007	.012	.021	.005	.009	.015	.004	.008	.013	.004	.007	.012	RDMW-T

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
RDMW-	.008	.013	.019	.006	.009	.014	.005	.007	.010	.004	.006	.009	.004	.006	.008	RDMW-
RDHT-T	.010	.014	.028	.008	.010	.020	.006	.008	.015	.005	.007	.013	.005	.006	.012	RDHT-T
RDMT-T	.010	.014	.028	.008	.010	.020	.006	.008	.015	.005	.007	.013	.005	.006	.012	RDMT-T
RDMW-T	.010	.019	.033	.008	.014	.024	.006	.010	.018	.005	.009	.015	.005	.008	.014	RDMW-T

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
RDMW-	.015	.023	.034	.011	.017	.024	.008	.013	.018	.007	.011	.016	.007	.010	.014	RDMW-
RDHT-T	.019	.025	.051	.014	.018	.037	.010	.014	.027	.009	.012	.024	.008	.011	.022	RDHT-T
RDMT-T	.019	.025	.051	.014	.018	.037	.010	.014	.027	.009	.012	.024	.008	.011	.022	RDMT-T
RDMW-T	.019	.034	.060	.014	.024	.043	.010	.018	.032	.009	.016	.028	.008	.014	.025	RDMW-T

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
RDMW-	.011	.017	.025	.008	.012	.018	.006	.009	.013	.005	.008	.012	.005	.007	.011	RDMW-
RDHT-T	.014	.018	.037	.010	.013	.027	.007	.010	.020	.006	.009	.017	.006	.008	.016	RDHT-T
RDMT-T	.014	.018	.037	.010	.013	.027	.007	.010	.020	.006	.009	.017	.006	.008	.016	RDMT-T
RDMW-T	.014	.025	.043	.010	.018	.031	.007	.013	.023	.006	.012	.020	.006	.011	.019	RDMW-T

Recommended Starting Speeds [SFM]

Material Group		THM			TN6525			TN6540			WP35CM
P	1	–	–	–	1340	1045	925	1180	925	785	1790	1555	1460
	2	–	–	–	1045	830	710	830	630	550	1105	1000	905
	3	–	–	–	925	710	610	710	550	450	1000	905	805
	4	–	–	–	770	550	475	590	430	355	750	690	630
	5	–	–	–	1025	770	650	785	590	490	1025	905	830
	6	–	–	–	670	535	430	535	395	335	630	535	430
M	1	–	–	–	630	395	260	430	260	200	805	725	610
	2	–	–	–	395	260	155	260	155	140	725	630	550
	3	–	–	–	415	260	180	275	155	140	570	510	450
K	1	390	295	245	905	805	725	725	670	590	1165	1045	940
	2	410	325	225	710	630	590	570	510	450	925	830	750
	3	425	310	195	590	535	475	510	475	415	770	690	630
N	1	2950	1965	1640	–	–	–	–	–	–	–	–	–
	2	2245	1525	1260	–	–	–	–	–	–	–	–	–
	3	1475	915	655	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	155	120	95	–	–	–
	2	–	–	–	–	–	–	80	60	40	–	–	–
	3	–	–	–	–	–	–	235	140	95	–	–	–
	4	–	–	–	–	–	–	200	95	80	260	200	130
H	1	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–

Material Group

TTM08

WK15CM

WS30PM

WS40PM

750

655

620

–

635

555

455

–

590

490

410

–

520

425

340

–

560

475

395

–

490

360

260

–

890

785

725

690

560

460

–

805

710

570

590

475

395

–

610

535

415

475

360

280

–

1655

1520

1340

–

1320

1165

1080

–

1105

985

905

–

180

155

120

130

115

–

180

155

120

130

115

–

215

180

120

165

130

–

335

235

155

195

165

100

–

Комплектующие for M100 • Weldon® End Mills • iC08 • Inch

Рычаг стальной

Цена по прейскуранту:

Скидка: %

Ваша цена::

Кол-во

Ключ стальной

Цена по прейскуранту:

Скидка: %

Ваша цена::

Кол-во

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Номер по каталогу ISO	Сплав

Welcome

Please confirm your preferences

Update Preferences

Предложения по продукции

Product Family suggestions

Send a Message

Send a Message

Editing Solution

Adding Solution