Sending to SolidCAM in progress...

Downloaded file will be available after import in the SolidCAM tool library.

Shrink Fit Toolholders High Torque (HT)
Shrink Fit Toolholders High Torque (HT)
Shrink Fit Toolholders High Torque (HT)
Shrink Fit Toolholders High Torque (HT)
Select the files you wish to request
Downloads
Request {{cadTool}} format
{{cadTool}} format is not available

TT HT HPV CV Form B/AD

Shrink Fit Toolholders High Torque (HT)

Метрическая система
Дюймовая система
SAP Material Number 3618006
ISO Catalog Number CV40BHPVTTHT062600
ANSI Catalog Number CV40BHPVTTHT062600
[D1] Adapter / Shank / Bore Diameter 15.875 mm
[D1] Adapter / Shank / Bore Diameter .625 in
[D2] Body Diameter 1 Workpiece Side 27 mm
[D2] Body Diameter 1 Workpiece Side 1.063 in
[D21] Body Diameter 2 Workpiece Side 33.9 mm
[D21] Body Diameter 2 Workpiece Side 1.335 in
Max Diameter Taper Angle [D22] 37.7 mm
Max Diameter Taper Angle [D22] 1.484 in
[L1] Gage Length 152.4 mm
[L1] Gage Length 6 in
[L2] Usable Length 63 mm
[L2] Usable Length 2.48 in
[L21] Usable Length 117.475 mm
[L21] Usable Length 4.625 in
[L9] Clamping Length 39 mm
[L9] Clamping Hole Length 1.54 in
[V] Adjustment Range 10 mm
[V] Adjustment Range .3937 in
Stop Screw ID Drive Size 6 mm
Weight Kilograms 1.64
Посмотреть все варианты продукции

Использование и область применения

  • Axial Adjustment - EndAxial Adjustment - End
  • Shank - 5/8"–11 unc DrawbarShank - 5/8"–11 unc Drawbar
  • Accuracy - 3μm or LessAccuracy - 3μm or Less
  • Drilling - Through CoolantDrilling - Through Coolant
  • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
  • Shank -  Cylindrical  Weldon® ≤h6Shank - Cylindrical Weldon® ≤h6
  • Shank - Cylindrical Whistle Notch ≤h6Shank - Cylindrical Whistle Notch ≤h6
  • Shank - SK CAT(CV) ANSI B5.50Shank - SK CAT(CV) ANSI B5.50
  • Balance -  G 6.3@15,000 min-1Balance - G 6.3@15,000 min-1
  • Shank - SK CAT(CV) ANSI B5.50 5/8"–11 unc DrawbarShank - SK CAT(CV) ANSI B5.50 5/8"–11 unc Drawbar

Характеристики и преимущества

  • Balanceable — fine tune with optional M6 set screws.

  • Suitable for carbide only, designated by groove in front face (requirements below).

  • 10 kW power or greater Shrink Fit device must be used.

Со стороны станка

загрузка...

Со стороны заготовки

загрузка...

Комплектующие for TT HT HPV CV Form B/AD

Spare Part
    Винт стальной Винт стальной
    Винт стальной
    Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
    product-image
    Please adjust the following properties from

    Номер по каталогу ISO

    Номер по каталогу ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
    Session expired due to inactivity, please login again
    Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
    товар(-ы) успешно добавлен(-ы) в корзину

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Номер по каталогу ISO Сплав    
    Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

    You are about to leave the Solution building process.

    Are you sure you want to leave?