Режущие части KM Micro™

Выбрать фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (86)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (86)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (86)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (86)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (86)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (86)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (86)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (86)
  • M Stainless Steel (86)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (86)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (86)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (86)
  • K Cast Iron (86)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (86)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (86)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (86)
  • N Non-Ferrous Materials (86)
    • N1
      Wrought Aluminum (86)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (86)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (78)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (86)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (86)
    • N6
      Carbon, Graphite Composites, CFRP (86)
    • N7
      MMC's (72)
  • S High-Temp Alloys (86)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (86)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (86)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (86)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (86)
  • H Hardened Materials (77)
    • H1
      Hardened Materials 44-48 HRC (77)
    • H2
      Hardened Materials 48-55 HRC (77)
    • H3
      Hardened Materials 56-60 HRC (63)
    • H4
      Hardened Materials >60 HRC (62)
  • C CFRP Materials (68)
    • C1
      CFRP, CFRP / CFRP (68)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (54)
Applications
Applications
  • Chamfer Turning Chamfer Turning (8)
  • Cut-Off Cut-Off (8)
  • Deep Grooving Deep Grooving (8)
  • Face Grooving Face Grooving (8)
  • Facing Facing (29)
  • Grooving Grooving (12)
  • ID Grooving ID Grooving (2)
  • ID Thread Turning ID Thread Turning (4)
  • Multiple Direction Cutting Multiple Direction Cutting (60)
  • OD Thread Turning OD Thread Turning (12)
  • Plunge Turning Plunge Turning (10)
  • Profiling Profiling (54)
  • TRN Boring TRN Boring (9)
  • Threading Threading (8)
  • Turning Turning (57)
Type of Thread
Type of Thread
  • 55 (6)
  • 60 (18)
  • ACME (8)
  • API (2)
  • API RD (8)
  • BSPT (6)
  • BSW (8)
  • BUTTRESS (12)
  • M (13)
  • NPT (8)
  • NPTF (6)
  • RD DIN 405 (6)
  • STUB ACME (8)
  • TR DIN 103 (6)
  • UN (18)
  • UNJ (8)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (74)
  • Lightly Interrupted Cut (80)
  • Smooth Cut (80)
  • Varying Depth of Cut (80)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (1)
  • 62.5 (2)
  • 90.0 (39)
  • 93.0 (26)
  • 95.0 (25)
Tool Cutting Edge Angle Min до Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (83)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (72)
  • 2.0 (54)
  • 3.0 (29)
  • 4.0 (18)
  • 6.0 (2)
  • 8.0 (5)
Cutting Edges Per Insert Min до Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 0.787 in (79)
  • 1.181 in (5)
  • 1.811 in (6)
  • 2.283 in (3)
Over All Length [L] Min до Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 20.0 mm (79)
  • 30.0 mm (5)
  • 46.0 mm (6)
  • 58.0 mm (3)
Over All Length [L] Min до Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (19)
  • 0.001 in (31)
  • 0.002 in (58)
  • 0.003 in (18)
  • 0.004 in (67)
  • 0.005 in (5)
  • 0.006 in (5)
  • 0.007 in (16)
  • 0.008 in (74)
  • 0.01 in (10)
  • 0.011 in (8)
  • 0.012 in (5)
  • 0.014 in (5)
  • 0.015 in (9)
  • 0.016 in (67)
  • 0.019 in (2)
  • 0.02 in (12)
  • 0.023 in (2)
  • 0.03 in (13)
  • 0.031 in (80)
  • 0.035 in (2)
  • 0.039 in (12)
  • 0.047 in (57)
  • 0.049 in (12)
  • 0.06 in (12)
  • 0.062 in (4)
  • 0.063 in (25)
  • 0.069 in (12)
  • 0.078 in (2)
  • 0.079 in (2)
  • 0.089 in (2)
  • 0.095 in (4)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (19)
  • 0.025 mm (31)
  • 0.05 mm (58)
  • 0.076 mm (18)
  • 0.1 mm (67)
  • 0.125 mm (5)
  • 0.151 mm (5)
  • 0.176 mm (16)
  • 0.2 mm (74)
  • 0.225 mm (5)
  • 0.25 mm (10)
  • 0.275 mm (8)
  • 0.301 mm (5)
  • 0.325 mm (5)
  • 0.351 mm (2)
  • 0.375 mm (9)
  • 0.4 mm (67)
  • 0.45 mm (2)
  • 0.476 mm (1)
  • 0.5 mm (12)
  • 0.576 mm (2)
  • 0.75 mm (13)
  • 0.775 mm (12)
  • 0.8 mm (68)
  • 0.9 mm (2)
  • 1.0 mm (12)
  • 1.201 mm (57)
  • 1.25 mm (12)
  • 1.5 mm (12)
  • 1.576 mm (4)
  • 1.6 mm (25)
  • 1.75 mm (12)
  • 1.975 mm (2)
  • 2.0 mm (2)
  • 2.25 mm (2)
  • 2.401 mm (4)
Corner Radius Min до Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (4)
  • 241 (2)
  • ALO (6)
  • C2 (6)
  • C3 (6)
  • CBN6 (6)
  • CG5 (10)
  • CG6 (6)
  • CL4 (4)
  • CM1 (10)
  • CM2 (4)
  • CM3 (4)
  • CM4 (4)
  • CPD1 (6)
  • CPX (4)
  • CW2 (4)
  • CW2015 (4)
  • CW5025 (4)
  • GH1 (12)
  • GX (2)
  • HCK10 (21)
  • HK1500 (28)
  • HK35 (12)
  • HT2 (48)
  • HTX (44)
  • HWK10 (4)
  • HWK15 (21)
  • K00331 (3)
  • K060 (4)
  • K090 (5)
  • K1 (2)
  • K1010P (12)
  • K10M (39)
  • K10P (27)
  • K10U (49)
  • K15U (48)
  • K20K (37)
  • K21 (4)
  • K25M (25)
  • K25P (20)
  • K2885 (12)
  • K313 (68)
  • K35P (2)
  • K420 (28)
  • K45 (4)
  • K4H (7)
  • K68 (70)
  • KB1340 (4)
  • KB1345 (29)
  • KB1610 (36)
  • KB1625 (29)
  • KB1630 (19)
  • KB5610 (38)
  • KB5625 (44)
  • KB5630 (28)
  • KB9610 (44)
  • KB9640 (4)
  • KBH10 (42)
  • KBH10B (4)
  • KBH20 (53)
  • KBH20B (4)
  • KBK35 (2)
  • KC210 (2)
  • KC250 (14)
  • KC5010 (86)
  • KC5020P (25)
  • KC5025 (77)
  • KC5410 (66)
  • KC5510 (6)
  • KC5525 (4)
  • KC710 (17)
  • KC720 (72)
  • KC722 (17)
  • KC730 (80)
  • KC7310 (8)
  • KC732 (59)
  • KC8050 (59)
  • KC810 (69)
  • KC850 (74)
  • KC9010 (40)
  • KC9025 (62)
  • KC910 (65)
  • KC9105 (56)
  • KC9110 (71)
  • KC9120 (48)
  • KC9125 (59)
  • KC9140 (9)
  • KC9145 (2)
  • KC9215 (9)
  • KC9225 (59)
  • KC9240 (58)
  • KC9240NEW (58)
  • KC9245 (8)
  • KC9315 (59)
  • KC9320 (68)
  • KC9325 (43)
  • KC935 (74)
  • KC950 (57)
  • KC990 (46)
  • KCD25 (50)
  • KCK05 (59)
  • KCK05B (52)
  • KCK15 (46)
  • KCK15B (49)
  • KCK20 (63)
  • KCK20B (68)
  • KCM15 (58)
  • KCM15B (38)
  • KCM25 (58)
  • KCM25B (56)
  • KCM25S (21)
  • KCM35 (44)
  • KCM35B (35)
  • KCP05 (57)
  • KCP05B (18)
  • KCP10 (59)
  • KCP10B (71)
  • KCP15 (3)
  • KCP20S (21)
  • KCP25 (62)
  • KCP25B (71)
  • KCP25C (62)
  • KCP30 (59)
  • KCP30B (13)
  • KCP40 (4)
  • KCP40B (9)
  • KCPK05 (6)
  • KCS10 (55)
  • KCS10B (54)
  • KCS25S (21)
  • KCU10 (77)
  • KCU10B (68)
  • KCU25 (68)
  • KCU25B (65)
  • KD050 (25)
  • KD081 (22)
  • KD100 (11)
  • KD105 (2)
  • KD120 (10)
  • KD1400 (54)
  • KD1405 (9)
  • KD1425 (56)
  • KM1 (4)
  • KMF (2)
  • KN10S (31)
  • KS15 (2)
  • KT1120 (2)
  • KT125 (16)
  • KT150 (5)
  • KT175 (54)
  • KT315 (74)
  • KT325 (50)
  • KT5020 (2)
  • KTP10 (57)
  • KTP25S (48)
  • KU10 (40)
  • KU10T (68)
  • KU25T (15)
  • KU30T (68)
  • KY1310 (4)
  • KY1320 (4)
  • KY1540 (2)
  • KY1615 (5)
  • KY2000 (4)
  • KY2100 (2)
  • KY3000 (6)
  • KY3400 (4)
  • KY3500 (4)
  • KY4000 (2)
  • KY4300 (2)
  • KY4400 (4)
  • KYHK15B (4)
  • KYK10 (4)
  • KYK25 (4)
  • KYK35 (4)
  • KYS25 (2)
  • KYS30 (2)
  • NL200 (2)
  • NL250 (6)
  • NL300 (4)
  • NL400 (2)
  • NL920 (6)
  • P25 (2)
  • PB100 (24)
  • PB170 (12)
  • PB250 (24)
  • PB300 (6)
  • PD100 (21)
  • PD50 (12)
  • PN120 (3)
  • PS5 (4)
  • SP0819 (4)
  • SP0G00 (4)
  • SP0NTA (1)
  • SP3019 (4)
  • SP4019 (2)
  • SPN3W1 (9)
  • THM (50)
  • THM-X (23)
  • THMF-X (4)
  • TN10P (60)
  • TN10U (49)
  • TN15M (50)
  • TN15U (48)
  • TN2000 (28)
  • TN20K (49)
  • TN20P (53)
  • TN30M (52)
  • TN30P (4)
  • TN4000 (16)
  • TN5015 (37)
  • TN5020 (36)
  • TN5105 (37)
  • TN5120 (40)
  • TN6010 (41)
  • TN6025 (49)
  • TN7 (6)
  • TN7005 (36)
  • TN7010 (39)
  • TN7015 (43)
  • TN7025 (39)
  • TN7035 (35)
  • TN7105 (40)
  • TN7110 (53)
  • TN7115 (41)
  • TN7125 (41)
  • TN7135 (39)
  • TN8025 (33)
  • TTI15 (32)
  • TTM (9)
  • TTM09 (12)
  • TTR (33)
  • TTS (16)
  • TTX (28)
  • W00160 (2)
  • W00342 (12)
  • WBH10C (28)
  • WBH10P (28)
  • WBH10U (34)
  • WBH20P (35)
  • WBH25P (34)
  • WBH25U (25)
  • WBH30P (28)
  • WBK40U (4)
  • WBK45U (35)
  • WDN00U (15)
  • WDN10U (6)
  • WDN25U (54)
  • WK05CT (38)
  • WK15CT (38)
  • WK20CT (47)
  • WM15CT (52)
  • WM25CT (55)
  • WM35CT (6)
  • WP05CT (2)
  • WP15CT (55)
  • WP20TT (18)
  • WP25CT (57)
  • WP35CT (30)
  • WS10PT (34)
  • WS25PT (33)
  • WU05PT (31)
  • WU10HT (41)
  • WU10PT (55)
  • WU25PT (41)
  • X00511 (2)
  • X00580 (2)
  • X00581 (2)
  • X00582 (2)
  • X00583 (2)
  • X00584 (2)
  • X00585 (2)
  • X00586 (2)
  • X00591 (2)
  • X00592 (2)
  • X00593 (2)
  • X00594 (2)
  • X00596 (2)
  • X00597 (2)
  • X00599 (2)
  • YY3A00 (4)
Hand Of Tool
Hand Of Tool
  • L (40)
  • N (3)
  • R (40)
Wiper Insert
Wiper Insert
  • N (86)
  • Y (19)
F Dimension
F Dimension
  • 0.0 mm (3)
  • 5.75 mm (3)
  • 5.801 mm (3)
  • 7.525 mm (3)
  • 8.0 mm (19)
  • 10.0 mm (52)
F Dimension Min до F Dimension Max
F Dimension
F Dimension
  • 0.0 in (3)
  • 0.226 in (3)
  • 0.228 in (3)
  • 0.296 in (3)
  • 0.315 in (19)
  • 0.394 in (52)
F Dimension Min до F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (10)
  • 11.101 mm (3)
  • 11.15 mm (3)
  • 14.25 mm (3)
  • 25.0 mm (6)
  • 32.0 mm (4)
  • 41.301 mm (2)
  • 47.6 mm (2)
  • 56.625 mm (8)
  • 88.9 mm (10)
  • 139.701 mm (2)
  • 174.601 mm (2)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (10)
  • 0.437 in (3)
  • 0.439 in (3)
  • 0.561 in (3)
  • 0.984 in (6)
  • 1.26 in (4)
  • 1.627 in (2)
  • 1.874 in (2)
  • 2.229 in (8)
  • 3.5 in (10)
  • 5.5 in (2)
  • 6.875 in (2)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (12)
Maximum Axial Groove Diameter Min до Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (12)
Maximum Axial Groove Diameter Min до Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (21)
  • E (18)
  • S (44)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (13)
  • NEGATIVE-ZERO (4)
  • NEUTRAL (ZERO) (59)
Maximum Bore Depth
Maximum Bore Depth
  • 1.614 in (6)
  • 2.039 in (3)
Maximum Bore Depth Min до Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 41.0 mm (6)
  • 51.801 mm (3)
Maximum Bore Depth Min до Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (9)
frontEnd
Clamp Style
Clamp Style
  • N (12)
  • P (9)
  • S (72)
Cutting Width
Cutting Width
  • 0.02 in (10)
  • 0.031 in (10)
  • 0.035 in (10)
  • 0.039 in (12)
  • 0.041 in (10)
  • 0.047 in (12)
  • 0.055 in (10)
  • 0.058 in (10)
  • 0.06 in (12)
  • 0.062 in (12)
  • 0.067 in (10)
  • 0.069 in (12)
  • 0.073 in (2)
  • 0.077 in (10)
  • 0.078 in (2)
  • 0.079 in (12)
  • 0.088 in (12)
  • 0.089 in (11)
  • 0.094 in (1)
  • 0.095 in (12)
  • 0.097 in (2)
  • 0.098 in (12)
  • 0.105 in (2)
  • 0.108 in (12)
  • 0.11 in (2)
  • 0.119 in (12)
  • 0.122 in (2)
  • 0.125 in (12)
  • 0.126 in (12)
  • 0.128 in (12)
  • 0.129 in (10)
  • 0.131 in (1)
  • 0.138 in (12)
  • 0.143 in (2)
  • 0.147 in (5)
  • 0.15 in (5)
  • 0.151 in (5)
  • 0.152 in (10)
  • 0.156 in (2)
  • 0.157 in (2)
  • 0.167 in (2)
  • 0.169 in (2)
  • 0.177 in (2)
  • 0.178 in (2)
  • 0.185 in (2)