successfully added to cart
View Cart

Режущие головки KM32TS™ для внутренней обработки

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Facing Facing (20)
  • Grooving Grooving (2)
  • ID Grooving ID Grooving (2)
  • ID Thread Turning ID Thread Turning (8)
  • Multiple Direction Cutting Multiple Direction Cutting (20)
  • OD Thread Turning OD Thread Turning (1)
  • Profiling Profiling (19)
  • TRN Boring TRN Boring (19)
  • Threading Threading (8)
  • Turning Turning (20)
Workpiece Material
  • P Steel (28)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (28)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (28)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (28)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (28)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (28)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (28)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (28)
  • M Stainless Steel (28)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (28)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (28)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (28)
  • K Cast Iron (28)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (28)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (28)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (28)
  • N Non-Ferrous Materials (28)
    • N1
      Wrought Aluminum
      (28)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (28)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (28)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (28)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (28)
    • N6
      Carbon, Graphite Composites, CFRP
      (28)
    • N7
      MMC's
      (28)
  • S High-Temp Alloys (28)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (28)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (28)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (28)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (28)
  • H Hardened Materials (28)
    • H1
      Hardened Materials 44-48 HRC
      (28)
    • H2
      Hardened Materials 48-55 HRC
      (24)
    • H3
      Hardened Materials 56-60 HRC
      (20)
    • H4
      Hardened Materials >60 HRC
      (20)
Type of Thread
  • 55 (4)
  • 60 (8)
  • ACME (2)
  • API RD (2)
  • BSPT (4)
  • BSW (4)
  • BUTTRESS (4)
  • M (6)
  • NPT (4)
  • NPTF (4)
  • RD DIN 405 (2)
  • STUB ACME (2)
  • TR DIN 103 (2)
  • UN (8)
  • UNJ (4)
Cutting Condition
  • Heavily Interrupted Cut (24)
  • Interrupted (5)
  • Lightly Interrupted Cut (24)
  • Smooth Cut (24)
  • Varying Depth of Cut (24)
Cutting Condition Material
  • H-All (16)
  • K-All (24)
  • K1 (4)
  • M-All (24)
  • N-All (24)
  • P-All (24)
  • S-All (24)
  • S2 (5)
  • S4 (20)
Tool Cutting Edge Angle
  • 90.0 (8)
  • 93.0 (7)
  • 95.0 (13)
to
Connection Style
  • KM (28)
Cutting Edges Per Insert
  • 1.0 (24)
  • 2.0 (24)
  • 3.0 (4)
  • 4.0 (14)
  • 8.0 (4)
to
cornerConfiguration
Corner Radius
  • 0.03 (1)
  • 0.033 (2)
  • 0.038 (1)
  • 0.051 (4)
  • 0.056 (1)
  • 0.07 (2)
  • 0.076 (5)
  • 0.08 (5)
  • 0.081 (1)
  • 0.089 (4)
  • 0.09 (4)
  • 0.097 (1)
  • 0.1 (19)
  • 0.102 (10)
  • 0.108 (1)
  • 0.152 (2)
  • 0.16 (1)
  • 0.185 (2)
  • 0.19 (4)
  • 0.191 (4)
  • 0.2 (21)
  • 0.202 (2)
  • 0.203 (13)
  • 0.21 (2)
  • 0.225 (2)
  • 0.25 (2)
  • 0.254 (2)
  • 0.397 (14)
  • 0.4 (20)
  • 0.406 (1)
  • 0.5 (4)
  • 0.7 (1)
  • 0.75 (4)
  • 0.787 (4)
  • 0.792 (4)
  • 0.794 (12)
  • 0.8 (20)
  • 0.936 (1)
  • 1.0 (4)
  • 1.19 (6)
  • 1.191 (5)
  • 1.194 (4)
  • 1.2 (10)
  • 1.25 (4)
  • 1.5 (4)
  • 1.587 (4)
  • 1.588 (9)
  • 1.6 (5)
  • 1.75 (4)
  • 2.381 (1)
to
Corner Radius
  • 0.0012 (1)
  • 0.0013 (2)
  • 0.0015 (1)
  • 0.002 (4)
  • 0.0028 (2)
  • 0.003 (5)
  • 0.0031 (4)
  • 0.0032 (1)
  • 0.0035 (4)
  • 0.0038 (1)
  • 0.004 (20)
  • 0.0043 (1)
  • 0.006 (2)
  • 0.0063 (1)
  • 0.0075 (4)
  • 0.008 (23)
  • 0.0083 (6)
  • 0.0089 (2)
  • 0.01 (2)
  • 0.0156 (20)
  • 0.016 (5)
  • 0.0197 (4)
  • 0.022 (1)
  • 0.0276 (1)
  • 0.0295 (4)
  • 0.031 (9)
  • 0.0312 (12)
  • 0.0313 (20)
  • 0.0315 (4)
  • 0.0369 (1)
  • 0.0394 (4)
  • 0.0469 (10)
  • 0.047 (11)
  • 0.0472 (4)
  • 0.0492 (4)
  • 0.0591 (4)
  • 0.0625 (9)
  • 0.063 (4)
  • 0.0689 (4)
  • 0.0938 (1)
  • 0.1563 (4)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (5)
  • 241 (4)
  • CG5 (5)
  • CL4 (4)
  • CM1 (5)
  • CM2 (5)
  • CM3 (4)
  • CM4 (4)
  • CPX (5)
  • CW2 (4)
  • CW2015 (5)
  • CW5025 (5)
  • GX (4)
  • HCK20 (1)
  • HCM15 (2)
  • HK1500 (4)
  • HT2 (4)
  • HTX (4)
  • K060 (5)
  • K090 (5)
  • K1 (4)
  • K10M (5)
  • K10P (5)
  • K10U (5)
  • K15 (4)
  • K15U (5)
  • K20K (5)
  • K21 (4)
  • K25M (5)
  • K25P (5)
  • K2885 (4)
  • K313 (24)
  • K35P (1)
  • K420 (9)
  • K45 (5)
  • K4H (2)
  • K68 (27)
  • KB1340 (4)
  • KB1345 (7)
  • KB1610 (16)
  • KB1625 (7)
  • KB1630 (12)
  • KB5610 (14)
  • KB5625 (11)
  • KB5630 (10)
  • KB9610 (16)
  • KB9640 (4)
  • KBH10 (5)
  • KBH10B (5)
  • KBH20 (5)
  • KBH20B (5)
  • KBK35 (4)
  • KC210 (5)
  • KC250 (13)
  • KC5010 (27)
  • KC5025 (28)
  • KC5410 (24)
  • KC5510 (5)
  • KC5525 (5)
  • KC710 (13)
  • KC720 (28)
  • KC722 (11)
  • KC730 (28)
  • KC7310 (9)
  • KC732 (20)
  • KC8050 (20)
  • KC810 (24)
  • KC850 (24)
  • KC9010 (16)
  • KC9025 (20)
  • KC910 (22)
  • KC9105 (16)
  • KC9110 (24)
  • KC9120 (16)
  • KC9125 (20)
  • KC9140 (5)
  • KC9145 (5)
  • KC9215 (5)
  • KC9225 (20)
  • KC9240 (20)
  • KC9240NEW (20)
  • KC9245 (5)
  • KC9315 (20)
  • KC9320 (20)
  • KC9325 (16)
  • KC935 (24)
  • KC950 (20)
  • KC990 (20)
  • KCD25 (16)
  • KCK05 (20)
  • KCK05B (7)
  • KCK15 (16)
  • KCK15B (16)
  • KCK20 (22)
  • KCK20B (24)
  • KCM15 (20)
  • KCM15B (14)
  • KCM25 (20)
  • KCM25B (16)
  • KCM35 (12)
  • KCM35B (4)
  • KCP05 (20)
  • KCP05B (5)
  • KCP10 (20)
  • KCP10B (24)
  • KCP25 (20)
  • KCP25B (24)
  • KCP30 (20)
  • KCP30B (5)
  • KCP40 (5)
  • KCP40B (5)
  • KCPK05 (9)
  • KCS10 (19)
  • KCS10B (20)
  • KCU10 (24)
  • KCU25 (24)
  • KD050 (16)
  • KD081 (5)
  • KD100 (20)
  • KD105 (9)
  • KD120 (16)
  • KD1400 (20)
  • KD1405 (20)
  • KD1425 (20)
  • KM1 (4)
  • KMF (4)
  • KT1120 (4)
  • KT125 (9)
  • KT150 (9)
  • KT175 (24)
  • KT315 (24)
  • KT325 (4)
  • KTP10 (16)
  • KU10 (9)
  • KU10T (24)
  • KU25T (7)
  • KU30T (20)
  • KY1310 (5)
  • KY1320 (5)
  • KY1540 (5)
  • KY1615 (5)
  • KY2000 (5)
  • KY2100 (5)
  • KY3000 (5)
  • KY3400 (5)
  • KY3500 (5)
  • KY4000 (4)
  • KY4300 (5)
  • KY4400 (5)
  • KYHK15B (5)
  • KYK10 (5)
  • KYK25 (5)
  • KYK35 (5)
  • KYS25 (5)
  • KYS30 (5)
  • NL200 (4)
  • NL250 (5)
  • NL300 (4)
  • NL400 (4)
  • NL920 (5)
  • P25 (6)
  • PB100 (4)
  • PB170 (4)
  • PB250 (4)
  • PB300 (4)
  • PS5 (4)
  • SP0819 (4)
  • SP3019 (4)
  • SP4019 (5)
  • SP4066 (1)
  • THM (8)
  • THM-X (4)
  • THMF-X (4)
  • TN10P (7)
  • TN10U (5)
  • TN15M (5)
  • TN15U (5)
  • TN2000 (4)
  • TN20K (5)
  • TN20P (5)
  • TN30M (5)
  • TN30P (5)
  • TN4000 (4)
  • TN5015 (4)
  • TN5020 (4)
  • TN5105 (5)
  • TN5120 (5)
  • TN6010 (9)
  • TN6025 (12)
  • TN7005 (5)
  • TN7010 (5)
  • TN7015 (5)
  • TN7025 (5)
  • TN7035 (4)
  • TN7105 (4)
  • TN7110 (8)
  • TN7115 (5)
  • TN7125 (4)
  • TN7135 (4)
  • TN8025 (5)
  • TTI15 (4)
  • TTR (4)
  • TTS (4)
  • TTX (4)
  • W00162 (4)
  • WBH10C (10)
  • WBH10P (14)
  • WBH10U (14)
  • WBH20P (5)
  • WBH25P (18)
  • WBH25U (5)
  • WBH30P (14)
  • WBK40U (4)
  • WBK45U (5)
  • WDN00U (20)
  • WDN25U (20)
  • WK05CT (5)
  • WK15CT (4)
  • WK20CT (16)
  • WM15CT (18)
  • WM25CT (14)
  • WM35CT (5)
  • WP05CT (4)
  • WP15CT (14)
  • WP25CT (20)
  • WP35CT (5)
  • WS10PT (5)
  • WS25PT (5)
  • WU10HT (5)
  • WU10PT (2)
  • X00511 (4)
Hand Of Tool
  • L (14)
  • R (14)
Minimum Axial Groove Diameter
  • 0.5118 (3)
  • 0.6299 (2)
  • 0.63 (2)
  • 0.7283 (1)
  • 0.787 (2)
  • 0.7874 (3)
  • 0.9843 (6)
  • 1.2598 (8)
  • 1.26 (1)
to
Minimum Axial Groove Diameter
  • 13.0 (3)
  • 16.0 (4)
  • 18.5 (1)
  • 20.0 (5)
  • 25.0 (6)
  • 32.0 (9)
to
Maximum Axial Groove Diameter
  • 9999.0 (4)
to
Maximum Axial Groove Diameter
  • 393.661 (4)
to
Cutting Direction
  • B (15)
  • E (5)
  • S (8)
Rake Angle Style
  • DOUBLE NEGATIVE (5)
  • DOUBLE POSITIVE (4)
  • NEGATIVE-ZERO (2)
  • NEUTRAL (ZERO) (11)
  • POSITIVE-ZERO (6)
Maximum Bore Depth
  • 35.0 (3)
  • 42.0 (3)
  • 43.21 (2)
  • 56.0 (3)
  • 57.25 (2)
  • 58.0 (4)
  • 60.0 (7)
  • 75.0 (4)
to
Maximum Bore Depth
  • 1.378 (3)
  • 1.6535 (1)
  • 1.654 (2)
  • 1.701 (2)
  • 2.2047 (3)
  • 2.254 (2)
  • 2.2835 (4)
  • 2.362 (3)
  • 2.3622 (4)
  • 2.9528 (3)
  • 2.953 (1)
to
Boring Bar Material
  • S (28)
Wiper Insert
  • N (28)
  • Y (20)
frontEnd
Clamp Style
  • M (7)
  • N (4)
  • S (17)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (13)
  • D-DIAMOND/RHOMBIC 55 (7)
  • LT-TRIANGLE LAY DOWN THREAD 60 (4)
  • TN-TOP NOTCH (4)
Cutting Width
  • 0.5 (4)
  • 0.787 (4)
  • 0.8 (4)
  • 0.889 (4)
  • 0.991 (4)
  • 1.0 (4)
  • 1.041 (4)
  • 1.19 (4)
  • 1.194 (4)
  • 1.199 (2)
  • 1.2 (4)
  • 1.39 (4)
  • 1.397 (4)
  • 1.4 (4)
  • 1.473 (4)
  • 1.5 (4)
  • 1.56 (2)
  • 1.57 (2)
  • 1.575 (4)
  • 1.69 (4)
  • 1.7 (4)
  • 1.702 (4)
  • 1.75 (4)
  • 1.94 (4)
  • 1.95 (4)
  • 1.956 (4)
  • 2.0 (4)
  • 2.007 (4)
  • 2.2 (4)
  • 2.235 (4)
  • 2.24 (4)
  • 2.25 (4)
  • 2.388 (4)
  • 2.5 (4)
  • 2.74 (4)
  • 2.743 (4)
  • 2.75 (4)
  • 2.997 (4)
  • 3.0 (4)
  • 3.175 (4)
  • 3.18 (2)
  • 3.2 (4)
  • 3.245 (4)
  • 3.251 (4)
  • 3.27 (4)
  • 3.5 (4)
  • 3.73 (2)
  • 3.81 (4)
  • 3.84 (4)
to
Cutting Width
  • 0.0197 (4)
  • 0.031 (4)
  • 0.0315 (4)
  • 0.035 (4)
  • 0.039 (4)
  • 0.0394 (4)
  • 0.041 (4)
  • 0.047 (4)
  • 0.0472 (4)
  • 0.055 (4)
  • 0.0551 (4)
  • 0.058 (4)
  • 0.0591 (4)
  • 0.062 (4)
  • 0.0669 (4)
  • 0.067 (4)
  • 0.0689 (4)
  • 0.076 (4)
  • 0.0768 (4)
  • 0.077 (4)
  • 0.0787 (4)
  • 0.079 (4)
  • 0.0866 (4)
  • 0.088 (4)
  • 0.0886 (4)
  • 0.094 (4)
  • 0.0984 (4)
  • 0.108 (4)
  • 0.1083 (4)
  • 0.118 (4)
  • 0.1181 (4)
  • 0.125 (4)
  • 0.126 (4)
  • 0.1278 (4)
  • 0.128 (4)
  • 0.129 (4)
  • 0.1378 (4)
  • 0.147 (2)
  • 0.15 (4)
  • 0.151 (4)
to
Insert Size
  • 2 (4)
Maximum Cutting Depth
  • 3.0 (4)
  • 3.18 (2)
  • 3.505 (1)
  • 3.51 (1)
  • 4.5 (3)
to
Maximum Cutting Depth
  • 0.1181 (4)
  • 0.1252 (2)
  • 0.138 (2)
  • 0.1772 (3)
to
insertGeometry
Cutting Tool Material
  • B H (16)
  • B L (20)
  • C A (5)
  • C N (5)
  • D P (20)
  • H T (24)
  • H W (28)
backEnd
Connection Type
  • TAPER SHANK (28)
System Size
  • KM32 (23)
  • KM32TS (5)
Back-End Diameter
  • 1.258 (1)
  • 1.2598 (27)
to
Back-End Diameter
  • 32.0 (28)
to
other
Platform
  • KM32 (22)
Tool Unit
  • I (4)
  • M (28)
kmtConfigurable
  • false (28)
Over All Length [L]
  • 50.0 (3)
  • 60.0 (5)
  • 70.0 (10)
  • 80.0 (6)
  • 90.0 (4)
to
Over All Length [L]
  • 1.9685 (3)
  • 2.362 (2)
  • 2.3622 (3)
  • 2.7559 (7)
  • 2.756 (3)
  • 3.1496 (6)
  • 3.5433 (4)
to
Insert Hand
  • L (3)
  • N (20)
  • R (5)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
1023868 KM32TSS25GMCLNL12 KM32TSS25GMCLNL12 32.0000 1.259 17.0000 .6693 75.0000 2.952 90.0000 3.543 CN..120408/CN..432    
    Your price::
    Qty
    1023729 KM32TSS25EMCLNR12 KM32TSS25EMCLNR12 32.0000 1.259 17.0000 .6693 58.0000 2.283 70.0000 2.755 CN..120408/CN..432    
      List price:
      $364.32 /each.
      Your price::
      Qty
      1023841 KM32TSS25EMCLNL12 KM32TSS25EMCLNL12 32.0000 1.260 17.0000 .6690 60.0000 2.362 70.0000 2.756 CNMA120408/CNMA432 0.28 0.61
        List price:
        $364.32 /each.
        Your price::
        Qty
        1023866 KM32TSS25GMCLNR12 KM32TSS25GMCLNR12 32.0000 1.259 17.0000 .6693 75.0000 2.952 90.0000 3.543 CN..120408/CN..432    
          List price:
          $364.32 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
          1020729 KM32TSS16ENER2 KM32TSS16ENER2 20.0000 .7870 11.0000 .4330 57.2500 2.254 70.0000 2.756 NG2L 0.16 0.35
            Your price::
            Qty
            1020730 KM32TSS16ENEL2 KM32TSS16ENEL2 20.0000 .7870 11.0000 .4330 57.2500 2.254 70.0000 2.756 NG2R 0.16 0.35
              Your price::
              Qty
              1144713 KM32TSS20FNEL2 KM32TSS20FNEL2 25.0000 .9843 13.0000 .5118 60.0000 2.362 80.0000 3.149 NG2R    
                Your price::
                Qty
                1020727 KM32TSS12DNER2 KM32TSS12DNER2 18.5000 .7283 11.0000 .4331 42.0000 1.654 60.0000 2.362 NG2L    
                  List price:
                  $364.32 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  ORIGINAL PRODUCT

                  Внутренние режущие узлы KM32

                  Фрезерование резьбы LT
                  (4 Products)
                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
                  1020456 KM32TSS12DLSER11 KM32TSS12DLSER11 16.0000 .6299 9.0000 .3543 42.0000 1.654 60.0000 2.362 LT11NR 0.14 0.31
                    Your price::
                    Qty
                    1020454 KM32TSS10CLSER11 KM32TSS10CLSER11 13.0000 .5118 7.0000 .2756 35.0000 1.378 50.0000 1.968 LT11NR 0.11 0.24
                      List price:
                      $364.32 /each.
                      Your price::
                      Qty