Предложения по продукции

Product Family suggestions

успешно добавлено в корзину
Показать корзину

Уведомления

Отметить все как прочитанные
Mobile Menu

Режущие головки KM63TS™

Выбрать фильтры
Filters
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (173)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (171)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (171)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (171)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (171)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (171)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (173)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (173)
  • M Stainless Steel (173)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (173)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (173)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (173)
  • K Cast Iron (180)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (180)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (180)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (177)
  • N Non-Ferrous Materials (173)
    • N1
      Wrought Aluminum
      (165)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (163)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (64)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (170)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (163)
    • N6
      Carbon, Graphite Composites, CFRP
      (144)
    • N7
      MMC's
      (160)
  • S High-Temp Alloys (180)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (180)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (180)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (180)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (171)
  • H Hardened Materials (145)
    • H1
      Hardened Materials 44-48 HRC
      (145)
    • H2
      Hardened Materials 48-55 HRC
      (137)
    • H3
      Hardened Materials 56-60 HRC
      (137)
    • H4
      Hardened Materials >60 HRC
      (129)
Applications
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (4)
  • Face Grooving Face Grooving (4)
  • Facing Facing (130)
  • Grooving Grooving (10)
  • ID Grooving ID Grooving (6)
  • ID Thread Turning ID Thread Turning (14)
  • Multiple Direction Cutting Multiple Direction Cutting (98)
  • OD Thread Turning OD Thread Turning (18)
  • Plunge Turning Plunge Turning (4)
  • Profiling Profiling (80)
  • TRN Boring TRN Boring (111)
  • Threading Threading (22)
  • Turning Turning (168)
Type of Thread
Type of Thread
  • 55 (8)
  • 60 (16)
  • ACME (16)
  • API (12)
  • API BUTTRESS (4)
  • API RD (8)
  • BSPT (4)
  • BSW (12)
  • BUTTRESS (8)
  • M (12)
  • NPT (8)
  • NPTF (4)
  • RD DIN 405 (8)
  • STUB ACME (12)
  • TR DIN 103 (8)
  • UN (12)
  • UNJ (8)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (167)
  • Interrupted (117)
  • Lightly Interrupted Cut (167)
  • Smooth Cut (169)
  • Varying Depth of Cut (169)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (18)
  • 48.0 (6)
  • 49.783 (1)
  • 50.0 (2)
  • 62.5 (2)
  • 63.0 (4)
  • 72.5 (1)
  • 75.0 (45)
  • 90.0 (42)
  • 93.0 (30)
  • 95.0 (26)
  • 107.5 (10)
Tool Cutting Edge Angle Min до Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (83)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (82)
  • 2.0 (93)
  • 3.0 (34)
  • 4.0 (125)
  • 6.0 (26)
  • 8.0 (88)
Cutting Edges Per Insert Min до Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (1)
  • 0.002 in (14)
  • 0.003 in (12)
  • 0.004 in (75)
  • 0.005 in (5)
  • 0.006 in (11)
  • 0.007 in (9)
  • 0.008 in (67)
  • 0.01 in (9)
  • 0.011 in (6)
  • 0.012 in (7)
  • 0.014 in (30)
  • 0.015 in (1)
  • 0.016 in (116)
  • 0.017 in (8)
  • 0.019 in (8)
  • 0.02 in (4)
  • 0.021 in (2)
  • 0.023 in (10)
  • 0.024 in (6)
  • 0.028 in (1)
  • 0.03 in (1)
  • 0.031 in (161)
  • 0.033 in (2)
  • 0.035 in (8)
  • 0.037 in (2)
  • 0.039 in (5)
  • 0.047 in (161)
  • 0.049 in (4)
  • 0.055 in (1)
  • 0.06 in (5)
  • 0.062 in (13)
  • 0.063 in (139)
  • 0.069 in (4)
  • 0.078 in (4)
  • 0.079 in (8)
  • 0.089 in (8)
  • 0.094 in (24)
  • 0.095 in (87)
  • 0.098 in (4)
  • 0.125 in (12)
  • 0.126 in (43)
  • 0.157 in (14)
  • 0.197 in (1)
  • 0.237 in (1)
  • 0.25 in (4)
  • 0.315 in (1)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (1)
  • 0.05 mm (14)
  • 0.076 mm (12)
  • 0.1 mm (75)
  • 0.125 mm (5)
  • 0.151 mm (11)
  • 0.176 mm (9)
  • 0.2 mm (67)
  • 0.225 mm (5)
  • 0.25 mm (9)
  • 0.275 mm (6)
  • 0.301 mm (7)
  • 0.325 mm (11)
  • 0.351 mm (27)
  • 0.375 mm (1)
  • 0.4 mm (116)
  • 0.426 mm (8)
  • 0.45 mm (8)
  • 0.476 mm (2)
  • 0.5 mm (4)
  • 0.525 mm (2)
  • 0.576 mm (10)
  • 0.601 mm (6)
  • 0.701 mm (1)
  • 0.75 mm (1)
  • 0.775 mm (4)
  • 0.8 mm (157)
  • 0.826 mm (2)
  • 0.9 mm (8)
  • 0.925 mm (2)
  • 1.0 mm (5)
  • 1.201 mm (161)
  • 1.25 mm (4)
  • 1.401 mm (1)
  • 1.5 mm (4)
  • 1.526 mm (1)
  • 1.576 mm (13)
  • 1.6 mm (139)
  • 1.75 mm (4)
  • 1.975 mm (4)
  • 2.0 mm (8)
  • 2.25 mm (8)
  • 2.375 mm (24)
  • 2.401 mm (87)
  • 2.5 mm (4)
  • 3.176 mm (12)
  • 3.2 mm (43)
  • 4.0 mm (14)
  • 5.0 mm (1)
  • 6.0 mm (1)
  • 6.351 mm (4)
  • 8.0 mm (1)
Corner Radius Min до Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (95)
  • 241 (9)
  • AC5 (4)
  • CL4 (71)
  • CM2 (99)
  • CM3 (79)
  • CM4 (40)
  • CPX (100)
  • CW2 (33)
  • CW2015 (107)
  • CW3020 (10)
  • CW5025 (114)
  • GX (55)
  • HCK10 (2)
  • HCK20 (1)
  • HK1500 (75)
  • HK35 (2)
  • HT2 (43)
  • HTX (22)
  • HWK10 (4)
  • HWK15 (2)
  • K00331 (2)
  • K060 (47)
  • K090 (138)
  • K1 (41)
  • K10M (125)
  • K10P (112)
  • K10U (85)
  • K15 (3)
  • K15U (85)
  • K20K (134)
  • K21 (62)
  • K25M (102)
  • K25P (114)
  • K2885 (4)
  • K313 (155)
  • K35P (87)
  • K420 (116)
  • K45 (54)
  • K4H (4)
  • K6 (4)
  • K68 (149)
  • KB1340 (38)
  • KB1345 (33)
  • KB1610 (54)
  • KB1625 (52)
  • KB1630 (42)
  • KB5610 (39)
  • KB5625 (56)
  • KB5630 (29)
  • KB9610 (77)
  • KB9640 (46)
  • KBH10 (73)
  • KBH10B (51)
  • KBH20 (77)
  • KBH20B (51)
  • KBK35 (13)
  • KBK45 (8)
  • KC210 (83)
  • KC250 (87)
  • KC5010 (159)
  • KC5020P (2)
  • KC5025 (162)
  • KC5410 (134)
  • KC5510 (136)
  • KC5525 (63)
  • KC710 (23)
  • KC720 (108)
  • KC722 (19)
  • KC725M (65)
  • KC730 (132)
  • KC7310 (133)
  • KC732 (84)
  • KC735M (1)
  • KC8050 (149)
  • KC810 (160)
  • KC850 (161)
  • KC9010 (133)
  • KC9025 (146)
  • KC910 (147)
  • KC9105 (127)
  • KC9110 (154)
  • KC9120 (148)
  • KC9125 (146)
  • KC9125RR (14)
  • KC9140 (138)
  • KC9145 (124)
  • KC915M (4)
  • KC920M (4)
  • KC9210 (19)
  • KC9215 (133)
  • KC9225 (144)
  • KC9240 (145)
  • KC9240NEW (145)
  • KC9245 (136)
  • KC9315 (147)
  • KC9320 (151)
  • KC9325 (144)
  • KC935 (154)
  • KC950 (147)
  • KC990 (148)
  • KCD25 (17)
  • KCK05 (143)
  • KCK05B (128)
  • KCK15 (150)
  • KCK15B (143)
  • KCK20 (155)
  • KCK20B (155)
  • KCM15 (144)
  • KCM15B (126)
  • KCM25 (145)
  • KCM25B (144)
  • KCM35 (137)
  • KCM35B (104)
  • KCP05 (108)
  • KCP05B (82)
  • KCP10 (146)
  • KCP10B (154)
  • KCP15 (2)
  • KCP25 (147)
  • KCP25B (154)
  • KCP25C (141)
  • KCP30 (146)
  • KCP30B (122)
  • KCP40 (118)
  • KCP40B (133)
  • KCPK05 (131)
  • KCPK30 (1)
  • KCS10 (17)
  • KCS10B (129)
  • KCU10 (155)
  • KCU25 (153)
  • KD050 (58)
  • KD081 (60)
  • KD100 (39)
  • KD120 (64)
  • KD1400 (44)
  • KD1405 (29)
  • KD1425 (48)
  • KM1 (50)
  • KMF (9)
  • KS15 (9)
  • KT1120 (18)
  • KT125 (73)
  • KT150 (46)
  • KT175 (79)
  • KT315 (104)
  • KT325 (48)
  • KT5020 (14)
  • KTP10 (15)
  • KU10 (2)
  • KU10T (104)
  • KU25T (10)
  • KU30T (154)
  • KY1310 (76)
  • KY1320 (122)
  • KY1525 (10)
  • KY1540 (65)
  • KY1615 (115)
  • KY2000 (74)
  • KY2100 (42)
  • KY2200 (4)
  • KY3000 (141)
  • KY3400 (108)
  • KY3500 (139)
  • KY4000 (48)
  • KY4300 (50)
  • KY4400 (115)
  • KYHK15B (113)
  • KYK10 (53)
  • KYK25 (94)
  • KYK35 (136)
  • KYS25 (54)
  • KYS30 (60)
  • MC2 (6)
  • MC3 (2)
  • NL200 (28)
  • NL250 (134)
  • NL300 (105)
  • NL400 (51)
  • NL400S (9)
  • NL920 (105)
  • P25 (34)
  • PB100 (13)
  • PB170 (15)
  • PB250 (15)
  • PB300 (9)
  • PD100 (2)
  • PD50 (2)
  • PN120 (1)
  • PS5 (35)
  • SP0819 (101)
  • SP0A00 (18)
  • SP0PW3 (2)
  • SP3019 (106)
  • SP4019 (77)
  • SP4036 (9)
  • SP4066 (1)
  • SP4093 (9)
  • SP61EJ (14)
  • SPADAP (24)
  • SPN4W2 (14)
  • SPSREJ (9)
  • THM (64)
  • THM-X (44)
  • THMF-X (28)
  • TN10P (127)
  • TN10U (87)
  • TN15M (125)
  • TN15U (85)
  • TN2000 (91)
  • TN20K (139)
  • TN20P (146)
  • TN30M (132)
  • TN30P (118)
  • TN4000 (89)
  • TN5015 (128)
  • TN5020 (112)
  • TN5105 (83)
  • TN5120 (121)
  • TN6010 (60)
  • TN6025 (74)
  • TN7005 (56)
  • TN7010 (134)
  • TN7015 (137)
  • TN7025 (133)
  • TN7035 (117)
  • TN7105 (56)
  • TN7110 (119)
  • TN7115 (121)
  • TN7125 (124)
  • TN7135 (117)
  • TN8025 (121)
  • TTI15 (37)
  • TTM (8)
  • TTM09 (45)
  • TTR (37)
  • TTR-X (14)
  • TTS (72)
  • TTX (43)
  • W00342 (19)
  • WBH10C (68)
  • WBH10P (29)
  • WBH10U (54)
  • WBH20P (77)
  • WBH25P (48)
  • WBH25U (71)
  • WBH30P (29)
  • WBK40U (38)
  • WBK45U (48)
  • WDN00U (18)
  • WDN25U (44)
  • WK05CT (141)
  • WK15CM (4)
  • WK15CT (72)
  • WK15PM (4)
  • WK20CT (150)
  • WK25YM (4)
  • WM15CT (144)
  • WM25CT (144)
  • WM35CT (136)
  • WP05CT (15)
  • WP15CT (146)
  • WP20TT (7)
  • WP25CT (146)
  • WP35CT (142)
  • WS10PT (130)
  • WS25PT (140)
  • WU05PT (6)
  • WU10HT (132)
  • WU10PT (83)
  • WU20PM (1)
  • WU25PT (81)
  • X00511 (9)
  • X00580 (9)
  • X00581 (9)
  • X00582 (9)
  • X00583 (9)
  • X00584 (9)
  • X00585 (9)
  • X00586 (9)
  • X00591 (9)
  • X00592 (9)
  • X00593 (9)
  • X00594 (9)
  • X00596 (9)
  • X00597 (9)
  • X00599 (9)
Hand Of Tool
Hand Of Tool
  • L (36)
  • N (11)
  • R (36)
Wiper Insert
Wiper Insert
  • N (183)
  • Y (83)
F Dimension
F Dimension
  • 0.0 mm (14)
  • 8.0 mm (1)
  • 27.0 mm (6)
  • 38.0 mm (15)
  • 43.0 mm (45)
  • 59.0 mm (2)
F Dimension Min до F Dimension Max
F Dimension
F Dimension
  • 0.0 in (14)
  • 0.315 in (1)
  • 1.063 in (6)
  • 1.496 in (15)
  • 1.693 in (45)
  • 2.323 in (2)
F Dimension Min до F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (4)
  • 41.301 mm (2)
  • 47.6 mm (2)
  • 57.2 mm (2)
  • 80.0 mm (34)
  • 86.0 mm (55)
  • 88.9 mm (2)
  • 90.0 mm (2)
  • 100.0 mm (18)
  • 118.0 mm (2)
  • 139.701 mm (2)
  • 174.601 mm (2)
  • 209.601 mm (2)
  • 222.3 mm (2)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (4)
  • 1.627 in (2)
  • 1.874 in (2)
  • 2.253 in (2)
  • 3.15 in (34)
  • 3.386 in (55)
  • 3.5 in (2)
  • 3.543 in (2)
  • 3.938 in (18)
  • 4.646 in (2)
  • 5.5 in (2)
  • 6.875 in (2)
  • 8.252 in (2)
  • 8.752 in (2)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (10)
Maximum Axial Groove Diameter Min до Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (10)
Maximum Axial Groove Diameter Min до Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (9)
  • S (74)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (63)
  • NEGATIVE-ZERO (11)
  • NEUTRAL (ZERO) (9)
Maximum Bore Depth
Maximum Bore Depth
  • 2.362 in (102)
  • 4.529 in (9)
Maximum Bore Depth Min до Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 60.0 mm (102)
  • 115.0 mm (9)
Maximum Bore Depth Min до Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (6)
frontEnd
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (4)
  • CUTOFF SUPPORT BLADE (6)
Clamp Style
Clamp Style
  • C (18)
  • M (79)
  • N (10)
  • P (67)
  • S (13)
Cutting Width
Cutting Width
  • 0.039 in (4)
  • 0.047 in (4)
  • 0.06 in (4)
  • 0.062 in (4)
  • 0.069 in (4)
  • 0.073 in (4)
  • 0.078 in (4)
  • 0.079 in (4)
  • 0.088 in (4)
  • 0.089 in (4)
  • 0.095 in (4)
  • 0.097 in (4)
  • 0.098 in (4)
  • 0.105 in (4)
  • 0.108 in (4)
  • 0.11 in (4)
  • 0.119 in (8)
  • 0.122 in (4)
  • 0.125 in (8)
  • 0.126 in (8)
  • 0.128 in (4)
  • 0.131 in (2)
  • 0.138 in (8)
  • 0.143 in (4)
  • 0.156 in (4)
  • 0.157 in (8)
  • 0.167 in (8)
  • 0.169 in (4)
  • 0.177 in (8)
  • 0.178 in (4)
  • 0.181 in (2)
  • 0.185 in (6)
  • 0.188 in (8)
  • 0.189 in (8)
  • 0.192 in (2)
  • 0.193 in (2)
  • 0.195 in (4)
  • 0.197 in (6)
  • 0.202 in (4)
  • 0.213 in (4)
  • 0.217 in (4)
  • 0.219 in (4)
  • 0.237 in (6)
  • 0.25 in (6)
  • 0.255 in (4)
  • 0.276 in (2)
  • 0.281 in (2)
  • 0.312 in (2)
  • 0.315 in (1)
  • 0.345 in (2)
  • 0.354 in (2)
  • 0.375 in (2)
  • 0.38 in (2)
Cutting Width Min до Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (4)
  • 1.201 mm (4)
  • 1.5 mm (4)
  • 1.576 mm (4)
  • 1.75 mm (4)
  • 1.826 mm (4)
  • 1.975 mm (4)
  • 2.0 mm (4)
  • 2.2 mm (4)
  • 2.225 mm (4)
  • 2.25 mm (4)
  • 2.401 mm (4)
  • 2.475 mm (4)
  • 2.5 mm (4)
  • 2.676 mm (4)
  • 2.75 mm (4)
  • 2.801 mm (4)
  • 3.0 mm (8)
  • 3.1 mm (4)
  • 3.176 mm (8)
  • 3.2 mm (8)
  • 3.25 mm (4)
  • 3.325 mm (2)
  • 3.5 mm (8)
  • 3.6 mm (4)
  • 3.95 mm (4)
  • 3.975 mm (2)
  • 4.0 mm (8)
  • 4.25 mm (8)
  • 4.3 mm (4)
  • 4.5 mm (8)
  • 4.525 mm (4)
  • 4.601 mm (2)
  • 4.7 mm (6)
  • 4.775 mm (8)
  • 4.801 mm (8)
  • 4.875 mm (2)
  • 4.9 mm (2)
  • 4.95 mm (4)
  • 5.0 mm (6)
  • 5.125 mm (4)
  • 5.4 mm (4)
  • 5.5 mm (4)
  • 5.575 mm (4)
  • 6.0 mm (6)
  • 6.351 mm (6)
  • 6.476 mm (4)
  • 7.0 mm (2)
  • 7.125 mm (2)
  • 7.926 mm (2)
  • 8.0 mm (1)
  • 8.75 mm (2)
  • 9.0 mm (2)
  • 9.525 mm (2)
  • 9.65 mm (2)
Cutting Width Min