Предложения по продукции

Product Family suggestions

успешно добавлено в корзину
Показать корзину

Уведомления

Отметить все как прочитанные
Mobile Menu

Крепление M

Выбрать фильтры
Filters
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (32)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (32)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (32)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (32)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (32)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (32)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (32)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (32)
  • M Stainless Steel (32)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (32)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (32)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (32)
  • K Cast Iron (32)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (32)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (32)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (32)
  • N Non-Ferrous Materials (32)
    • N1
      Wrought Aluminum
      (32)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (32)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (32)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (32)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (32)
    • N6
      Carbon, Graphite Composites, CFRP
      (32)
    • N7
      MMC's
      (32)
  • S High-Temp Alloys (32)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (32)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (32)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (32)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (32)
  • H Hardened Materials (32)
    • H1
      Hardened Materials 44-48 HRC
      (32)
    • H2
      Hardened Materials 48-55 HRC
      (32)
    • H3
      Hardened Materials 56-60 HRC
      (32)
    • H4
      Hardened Materials >60 HRC
      (32)
Applications
Applications
  • Facing Facing (32)
  • Multiple Direction Cutting Multiple Direction Cutting (32)
  • Profiling Profiling (28)
  • TRN Boring TRN Boring (28)
  • Turning Turning (32)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (32)
  • Interrupted (32)
  • Lightly Interrupted Cut (32)
  • Smooth Cut (32)
  • Varying Depth of Cut (32)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 93.0 (16)
  • 95.0 (16)
Tool Cutting Edge Angle Min до Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (32)
  • 2.0 (32)
  • 4.0 (32)
  • 8.0 (16)
Cutting Edges Per Insert Min до Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (32)
  • 0.008 in (32)
  • 0.016 in (32)
  • 0.031 in (32)
  • 0.047 in (32)
  • 0.062 in (16)
  • 0.063 in (32)
  • 0.094 in (16)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (32)
  • 0.2 mm (32)
  • 0.4 mm (32)
  • 0.8 mm (32)
  • 1.201 mm (32)
  • 1.576 mm (16)
  • 1.6 mm (32)
  • 2.375 mm (16)
Corner Radius Min до Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (32)
  • 241 (16)
  • CL4 (16)
  • CM2 (32)
  • CM3 (16)
  • CM4 (16)
  • CPX (32)
  • CW2 (16)
  • CW2015 (32)
  • CW5025 (32)
  • GX (16)
  • HK1500 (16)
  • HT2 (16)
  • HTX (16)
  • K060 (32)
  • K090 (32)
  • K1 (16)
  • K10M (32)
  • K10P (32)
  • K10U (32)
  • K15U (32)
  • K20K (32)
  • K21 (16)
  • K25M (32)
  • K25P (32)
  • K313 (32)
  • K35P (16)
  • K420 (32)
  • K45 (32)
  • K68 (32)
  • KB1340 (16)
  • KB1345 (32)
  • KB1610 (32)
  • KB1625 (32)
  • KB1630 (32)
  • KB5610 (32)
  • KB5625 (32)
  • KB5630 (32)
  • KB9610 (32)
  • KB9640 (16)
  • KBH10 (32)
  • KBH10B (32)
  • KBH20 (32)
  • KBH20B (32)
  • KBK35 (16)
  • KC210 (32)
  • KC250 (32)
  • KC5010 (32)
  • KC5025 (32)
  • KC5410 (32)
  • KC5510 (32)
  • KC5525 (32)
  • KC710 (16)
  • KC720 (32)
  • KC722 (16)
  • KC725M (16)
  • KC730 (32)
  • KC7310 (32)
  • KC732 (32)
  • KC8050 (32)
  • KC810 (32)
  • KC850 (32)
  • KC9010 (32)
  • KC9025 (32)
  • KC910 (32)
  • KC9105 (32)
  • KC9110 (32)
  • KC9120 (32)
  • KC9125 (32)
  • KC9140 (32)
  • KC9145 (32)
  • KC9215 (32)
  • KC9225 (32)
  • KC9240 (32)
  • KC9240NEW (32)
  • KC9245 (32)
  • KC9315 (32)
  • KC9320 (32)
  • KC9325 (32)
  • KC935 (32)
  • KC950 (32)
  • KC990 (32)
  • KCD25 (16)
  • KCK05 (32)
  • KCK05B (32)
  • KCK15 (32)
  • KCK15B (32)
  • KCK20 (32)
  • KCK20B (32)
  • KCM15 (32)
  • KCM15B (32)
  • KCM25 (32)
  • KCM25B (32)
  • KCM35 (32)
  • KCM35B (16)
  • KCP05 (32)
  • KCP05B (32)
  • KCP10 (32)
  • KCP10B (32)
  • KCP25 (32)
  • KCP25B (32)
  • KCP25C (32)
  • KCP30 (32)
  • KCP30B (32)
  • KCP40 (32)
  • KCP40B (32)
  • KCPK05 (32)
  • KCS10 (16)
  • KCS10B (32)
  • KCU10 (32)
  • KCU25 (32)
  • KD050 (32)
  • KD081 (32)
  • KD100 (32)
  • KD120 (32)
  • KD1400 (32)
  • KD1405 (32)
  • KD1425 (32)
  • KM1 (16)
  • KMF (16)
  • KS15 (16)
  • KT1120 (16)
  • KT125 (32)
  • KT150 (32)
  • KT175 (32)
  • KT315 (32)
  • KT325 (16)
  • KTP10 (16)
  • KU10T (32)
  • KU30T (32)
  • KY1310 (32)
  • KY1320 (32)
  • KY1540 (32)
  • KY1615 (32)
  • KY2000 (32)
  • KY2100 (32)
  • KY3000 (32)
  • KY3400 (32)
  • KY3500 (32)
  • KY4000 (16)
  • KY4300 (32)
  • KY4400 (32)
  • KYHK15B (32)
  • KYK10 (32)
  • KYK25 (32)
  • KYK35 (32)
  • KYS25 (32)
  • KYS30 (32)
  • NL200 (16)
  • NL250 (32)
  • NL300 (16)
  • NL400 (16)
  • NL400S (16)
  • NL920 (32)
  • P25 (16)
  • PB100 (16)
  • PB170 (16)
  • PB250 (16)
  • PB300 (16)
  • PS5 (16)
  • SP0819 (32)
  • SP3019 (32)
  • SP4019 (32)
  • THM (16)
  • THM-X (16)
  • THMF-X (16)
  • TN10P (32)
  • TN10U (32)
  • TN15M (32)
  • TN15U (32)
  • TN2000 (16)
  • TN20K (32)
  • TN20P (32)
  • TN30M (32)
  • TN30P (32)
  • TN4000 (16)
  • TN5015 (32)
  • TN5020 (16)
  • TN5105 (32)
  • TN5120 (32)
  • TN6010 (32)
  • TN6025 (16)
  • TN7005 (32)
  • TN7010 (32)
  • TN7015 (32)
  • TN7025 (32)
  • TN7035 (16)
  • TN7105 (16)
  • TN7110 (32)
  • TN7115 (32)
  • TN7125 (16)
  • TN7135 (16)
  • TN8025 (32)
  • TTI15 (16)
  • TTR (16)
  • TTS (16)
  • TTX (16)
  • WBH10C (32)
  • WBH10P (32)
  • WBH10U (32)
  • WBH20P (32)
  • WBH25P (32)
  • WBH25U (32)
  • WBH30P (32)
  • WBK40U (16)
  • WBK45U (32)
  • WDN00U (32)
  • WDN25U (32)
  • WK05CT (32)
  • WK15CT (16)
  • WK20CT (32)
  • WM15CT (32)
  • WM25CT (32)
  • WM35CT (32)
  • WP05CT (16)
  • WP15CT (32)
  • WP25CT (32)
  • WP35CT (32)
  • WS10PT (32)
  • WS25PT (32)
  • WU10HT (32)
  • WU10PT (16)
  • WU25PT (16)
  • X00511 (16)
  • X00580 (16)
  • X00581 (16)
  • X00582 (16)
  • X00583 (16)
  • X00584 (16)
  • X00585 (16)
  • X00586 (16)
  • X00591 (16)
  • X00592 (16)
  • X00593 (16)
  • X00594 (16)
  • X00596 (16)
  • X00597 (16)
  • X00599 (16)
Hand Of Tool
Hand Of Tool
  • L (16)
  • R (16)
Wiper Insert
Wiper Insert
  • N (32)
  • Y (32)
F Dimension
F Dimension
  • 17.0 mm (8)
  • 22.0 mm (8)
  • 27.0 mm (8)
  • 35.0 mm (8)
F Dimension Min до F Dimension Max
F Dimension
F Dimension
  • 0.669 in (8)
  • 0.866 in (8)
  • 1.063 in (8)
  • 1.379 in (8)
F Dimension Min до F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 32.0 mm (8)
  • 40.0 mm (8)
  • 50.0 mm (8)
  • 63.0 mm (8)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.26 in (8)
  • 1.575 in (8)
  • 1.969 in (8)
  • 2.48 in (8)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (16)
  • E (16)
Maximum Bore Depth
Maximum Bore Depth
  • 1.78 in (2)
  • 1.986 in (2)
  • 2.444 in (4)
  • 3.037 in (4)
  • 3.473 in (4)
  • 4.11 in (4)
  • 4.412 in (4)
  • 4.612 in (4)
  • 5.883 in (4)
Maximum Bore Depth Min до Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 45.176 mm (2)
  • 50.45 mm (2)
  • 62.075 mm (4)
  • 77.15 mm (4)
  • 88.226 mm (4)
  • 104.4 mm (4)
  • 112.075 mm (4)
  • 117.15 mm (4)
  • 149.4 mm (4)
Maximum Bore Depth Min до Maximum Bore Depth Max
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (16)
  • D-DIAMOND/RHOMBIC 55 (16)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (32)
  • B L (32)
  • C A (32)
  • C N (32)
  • D P (32)
  • H T (32)
  • H W (32)
No filters matching ""
Показать ассортимент в
Метрическая система
Дюймовая система

ОРИГИНАЛЬНЫЙ ПРОДУКТ

MDUN 93° • KM63TS™ MDUN 93° • KM63TS™

M-Clamping
(16 Products)
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
Посмотреть ассортимент
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
2265356 KM63TSS25FMDUNL15 KM63TSS25FMDUNL15 32.0000 1.259 17.0000 .6693 45.1700 1.778 80.0000 3.149 DN..150408/DN..432 0.94 2.08
    Данный товар недоступен
    Данный товар можно приобрести у дистрибьютора
    Ваша цена::
    2265355 KM63TSS25FMDUNR15 KM63TSS25FMDUNR15 32.0000 1.259 17.0000 .6693 45.1700 1.778 80.0000 3.149 DN..150408/DN..432 0.95 2.09
      Данный товар недоступен
      Данный товар можно приобрести у дистрибьютора
      Ваша цена::
      2265354 KM63TSS25KMDUNL15 KM63TSS25KMDUNL15 32.0000 1.259 17.0000 .6693 88.2300 3.474 125.0000 4.921 DN..150408/DN..432 1.13 2.50
        Цена по прейскуранту:
        $587.67 /каждый
        Ваша цена::
        2265353 KM63TSS25KMDUNR15 KM63TSS25KMDUNR15 32.0000 1.260 17.0000 .6690 88.2300 3.474 125.0000 4.921 DNMA150408/DNMA432 1.13 2.50
          Цена по прейскуранту:
          $587.67 /каждый
          Ваша цена::
          2265359 KM63TSS32GMDUNR15 KM63TSS32GMDUNR15 40.0000 1.574 22.0000 .8661 62.0700 2.444 90.0000 3.543 DN..150408/DN..432 1.05 2.30
            Данный товар недоступен
            Данный товар можно приобрести у дистрибьютора
            Ваша цена::
            2265357 KM63TSS32LMDUNR15 KM63TSS32LMDUNR15 40.0000 1.574 22.0000 .8661 112.0700 4.412 140.0000 5.511 DN..150408/DN..432 1.36 2.99
              Цена по прейскуранту:
              $587.67 /каждый
              Ваша цена::
              Цена по прейскуранту:
              Скидка: %
              Ваша цена::
              Замена Данный товар недоступен
              Продукция для замены Данный товар можно приобрести у дистрибьютора

              ОРИГИНАЛЬНЫЙ ПРОДУКТ

              MCLN 95° • KM63TS™ MCLN 95° • KM63TS™

              M-Clamping
              (16 Products)
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              Посмотреть ассортимент
              SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
              2265330 KM63TSS25FMCLNL12 KM63TSS25FMCLNL12 32.0000 1.259 17.0000 .6693 50.4500 1.986 80.0000 3.149 CN..120408/CN..432 0.90 1.99
                Цена по прейскуранту:
                $569.00 /каждый
                Ваша цена::
                2265329 KM63TSS25FMCLNR12 KM63TSS25FMCLNR12 32.0000 1.259 17.0000 .6693 50.4500 1.986 80.0000 3.149 CN..120408/CN..432 0.90 1.99
                  Цена по прейскуранту:
                  $569.00 /каждый
                  Ваша цена::
                  2265328 KM63TSS25KMCLNL12 KM63TSS25KMCLNL12 32.0000 1.260 17.0000 .6690 88.2300 3.474 125.0000 4.921 CNMA120408/CNMA432 1.14 2.52
                    Цена по прейскуранту:
                    $569.00 /каждый
                    Ваша цена::
                    2265327 KM63TSS25KMCLNR12 KM63TSS25KMCLNR12 32.0000 1.259 17.0000 .6693 88.2300 3.474 125.0000 4.921 CN..120408/CN..432 1.14 2.52
                      Цена по прейскуранту:
                      $569.00 /каждый
                      Ваша цена::
                      2265332 KM63TSS32LMCLNL12 KM63TSS32LMCLNL12 40.0000 1.574 22.0000 .8661 112.0700 4.412 140.0000 5.511 CN..120408/CN..432 1.37 3.01
                        Цена по прейскуранту:
                        $569.00 /каждый
                        Ваша цена::
                        2265331 KM63TSS32LMCLNR12 KM63TSS32LMCLNR12 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 CNMA120408/CNMA432 1.37 3.01
                          Цена по прейскуранту:
                          $569.00 /каждый
                          Ваша цена::
                          Цена по прейскуранту:
                          Скидка: %
                          Ваша цена::
                          Замена Данный товар недоступен
                          Продукция для замены Данный товар можно приобрести у дистрибьютора
                          product-image
                          Please adjust the following properties from

                          Номер по каталогу ISO

                          Номер по каталогу ANSI

                          to find similar products.
                          Вы собираетесь создать дубликат . Хотите продолжить?
                          Вы собираетесь удалить Хотите продолжить?
                          Как вы хотите переименовать ?
                          Введите действительное имя
                          Введите имя дубликата
                          Введите действительное имя
                          Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
                          Введите действительное имя
                          Отправить копию

                          Введите действительный адрес электронной почты
                          Введите действительное имя

                          Найдены следующие чертежи САПР

                          Выберите файлы, которые вы ищете, и загрузите их одновременно

                          Не можете найти нужный тип файла?
                          Запросить чертежи »

                          Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
                          Session expired due to inactivity, please login again
                          Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
                          товар(-ы) успешно добавлен(-ы) в корзину
                          Показать корзину
                          DOWNLOAD TYPE:



                          . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                          SAP Material Number Номер по каталогу ISO Сплав    
                          Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                          You are about to leave the Solution building process.

                          Are you sure you want to leave?