M-Style Clamping • For Negative Style Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (14)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(14)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(14)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(14)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(14)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(14)
- M Stainless Steel (10)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(10)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(10)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(10)
- K Cast Iron (14)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(14)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(14)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(14)
- N Non-Ferrous Materials (10)
- N1Wrought Aluminum (10)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(10)
- N3High-Silicon Aluminum Alloys Si >12.2%(7)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (10)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (7)
- N6Carbon, Graphite Composites, CFRP (7)
- N7MMC's (7)
- S High-Temp Alloys (10)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(10)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(10)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(10)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(10)
- H Hardened Materials (9)
- H1Hardened Materials 44-48 HRC(9)
- H2Hardened Materials 48-55 HRC(9)
- H3Hardened Materials 56-60 HRC(9)
- H4Hardened Materials >60 HRC(9)
Applications
Applications
CRT Profiling (10)
ID Facing (14)
Multiple Direction Cutting (7)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (14)
- Lightly Interrupted Cut (14)
- Smooth Cut (14)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (2)
- 75.0 (2)
- 85.0 (2)
- 90.0 (5)
- 95.0 (3)
to
Over All Length [L]
Over All Length [L]
- 1.972 in(2)
- 1.998 in(1)
- 2.0559 in(1)
- 2.1654 in(4)
- 2.2055 in(1)
- 2.4803 in(2)
- 2.7559 in(3)
to
Over All Length [L]
Over All Length [L]
- 50.09 mm(2)
- 50.75 mm(1)
- 52.22 mm(1)
- 55.0 mm(4)
- 56.02 mm(1)
- 63.0 mm(2)
- 70.0 mm(3)
to
Corner Radius
Corner Radius
- 0.004 in(3)
- 0.008 in(7)
- 0.016 in(13)
- 0.031 in(14)
- 0.047 in(10)
- 0.063 in(10)
to
Corner Radius
Corner Radius
- 0.1 mm(3)
- 0.2 mm(7)
- 0.4 mm(13)
- 0.8 mm(14)
- 1.2 mm(10)
- 1.6 mm(10)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (9)
- CW5025 (7)
- PB100 (3)
- THM (9)
- THM-X (4)
- THMF-X (8)
- TN10P (8)
- TN10U (7)
- TN15M (8)
- TN15U (8)
- TN2000 (9)
- TN20K (9)
- TN20P (10)
- TN30M (8)
- TN30P (10)
- TN4000 (9)
- TN6010 (3)
- TTS (4)
- WBH10P (3)
- WBH10U (3)
- WBH20P (8)
- WBH30P (3)
- WBK40U (1)
- WDN00U (3)
- WDN25U (7)
- WK05CT (10)
- WK15CT (9)
- WK20CT (14)
- WM15CT (9)
- WM25CT (10)
- WM35CT (10)
- WP05CT (3)
- WP15CT (14)
- WP25CT (14)
- WP35CT (10)
- WS10PT (9)
- WS25PT (10)
- WU10HT (10)
- WU10PT (8)
- WU25PT (8)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 40.0 mm(4)
- 50.0 mm(5)
- 60.0 mm(2)
- 70.0 mm(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.5748 in(4)
- 1.9685 in(4)
- 1.969 in(1)
- 2.3622 in(2)
- 2.7559 in(3)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (3)
- S-SQUARE 90 (6)
- T-TRIANGLE 60 (5)
Cartridge Size
Cartridge Size
- 10 - mm of Cutting Height (4)
- 12 - mm of Cutting Height (5)
- 16 - mm of Cutting Height (2)
- 20 - mm of Cutting Height (3)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (4)
- B L (8)
- C A (9)
- C N (8)
- D P (7)
- H W (14)
No filters matching ""
