P-Clamping
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (13)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(13)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(13)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(13)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(13)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(13)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(13)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(13)
- M Stainless Steel (13)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(13)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(13)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(13)
- K Cast Iron (13)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(13)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(13)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(13)
- N Non-Ferrous Materials (13)
- N1Wrought Aluminum (13)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(13)
- N3High-Silicon Aluminum Alloys Si >12.2%(9)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (13)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (9)
- N6Carbon, Graphite Composites, CFRP (9)
- N7MMC's (9)
- S High-Temp Alloys (13)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(13)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(13)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(13)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(13)
- H Hardened Materials (9)
- H1Hardened Materials 44-48 HRC(9)
- H2Hardened Materials 48-55 HRC(9)
- H3Hardened Materials 56-60 HRC(9)
- H4Hardened Materials >60 HRC(9)
Applications
Applications
Facing (13)
Multiple Direction Cutting (13)
Profiling (11)
TRN Boring (11)
Turning (13)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (13)
- Lightly Interrupted Cut (13)
- Smooth Cut (13)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 93.0 (2)
- 95.0 (11)
komu
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (9)
- 2.0 (7)
- 3.0 (4)
- 4.0 (7)
- 6.0 (6)
- 8.0 (5)
komu
Over All Length [L]
Over All Length [L]
- 2.7559 in(2)
- 3.5433 in(10)
- 3.937 in(1)
komu
Over All Length [L]
Over All Length [L]
- 70.0 mm(2)
- 90.0 mm(10)
- 100.0 mm(1)
komu
Corner Radius
Corner Radius
- 0.004 in(9)
- 0.008 in(11)
- 0.016 in(13)
- 0.024 in(4)
- 0.031 in(13)
- 0.047 in(13)
- 0.063 in(9)
komu
Corner Radius
Corner Radius
- 0.1 mm(9)
- 0.2 mm(11)
- 0.4 mm(13)
- 0.6 mm(4)
- 0.8 mm(13)
- 1.2 mm(13)
- 1.6 mm(9)
komu
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (5)
- CW5025 (9)
- K060 (5)
- K313 (9)
- K68 (5)
- KB1340 (7)
- KB1345 (5)
- KB1610 (9)
- KB1630 (5)
- KB5610 (5)
- KB5630 (5)
- KBH10 (9)
- KBH10B (9)
- KBH20 (9)
- KBH20B (9)
- KC5010 (13)
- KC5025 (13)
- KC5410 (9)
- KC730 (9)
- KC850 (9)
- KCK05 (13)
- KCK05B (9)
- KCK15 (13)
- KCK15B (13)
- KCK20 (11)
- KCK20B (13)
- KCM15 (13)
- KCM15B (13)
- KCM25 (13)
- KCM25B (13)
- KCM35 (9)
- KCM35B (11)
- KCP05 (11)
- KCP05B (13)
- KCP10 (13)
- KCP10B (13)
- KCP25 (11)
- KCP25B (13)
- KCP25C (13)
- KCP30 (13)
- KCP30B (11)
- KCP40 (9)
- KCP40B (9)
- KCPK05 (11)
- KCS10 (5)
- KCS10B (11)
- KCU10 (13)
- KCU10B (13)
- KCU25 (13)
- KCU25B (13)
- KD1400 (5)
- KD1405 (5)
- KD1425 (9)
- KS15 (5)
- KT315 (13)
- KT325 (5)
- KTP10 (13)
- KTP25S (9)
- KY1540 (5)
- KY3500 (9)
- KY4300 (5)
- KY4400 (9)
- KYHK15B (9)
- KYK10 (5)
- KYK25 (9)
- KYS25 (5)
- KYS30 (9)
- PB100 (5)
- SP4019 (5)
- THM (5)
- THM-X (5)
- THMF-X (5)
- TN10P (9)
- TN10U (9)
- TN15M (9)
- TN15U (5)
- TN2000 (11)
- TN20K (9)
- TN20P (13)
- TN30M (11)
- TN30P (9)
- TN4000 (11)
- TN6010 (5)
- TTS (5)
- WBH10P (5)
- WBH10U (5)
- WBH20P (9)
- WBH30P (5)
- WDN00U (5)
- WDN25U (9)
- WK05CT (13)
- WK15CT (11)
- WK20CT (13)
- WM15CT (13)
- WM25CT (13)
- WM35CT (13)
- WP05CT (9)
- WP15CT (13)
- WP25CT (13)
- WP35CT (9)
- WS10PT (13)
- WS25PT (13)
- WU10HT (13)
- WU10PT (13)
- WU25PT (13)
- X00580 (5)
- X00581 (5)
- X00582 (5)
- X00583 (5)
- X00584 (5)
- X00585 (5)
- X00586 (5)
- X00591 (5)
- X00592 (5)
- X00593 (5)
- X00594 (5)
- X00596 (5)
- X00597 (5)
- X00599 (5)
Hand Of Tool
Hand Of Tool
- L (6)
- R (7)
Wiper Insert
Wiper Insert
- N (13)
- Y (13)
F Dimension
F Dimension
- 17.0 mm(11)
- 22.0 mm(2)
komu
F Dimension
F Dimension
- 0.6693 in(11)
- 0.8661 in(2)
komu
Minimum Bore Diameter
Minimum Bore Diameter
- 1.2598 in(11)
- 1.5748 in(2)
komu
Minimum Bore Diameter
Minimum Bore Diameter
- 32.0 mm(11)
- 40.0 mm(2)
komu
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 32.0 mm(11)
- 40.0 mm(2)
komu
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.2598 in(11)
- 1.5748 in(2)
komu
Cutting Direction
Cutting Direction
- B (11)
- E (2)
Maximum Bore Depth
Maximum Bore Depth
- 2.1689 in(2)
- 2.9543 in(1)
- 2.9929 in(2)
- 3.0445 in(8)
komu
Maximum Bore Depth
Maximum Bore Depth
- 55.09 mm(2)
- 75.04 mm(1)
- 76.02 mm(2)
- 77.33 mm(8)
komu
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (5)
- D-DIAMOND/RHOMBIC 55 (2)
- W-TRIGON 80 (6)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (11)
- B L (9)
- C A (9)
- C N (9)
- D P (9)
- H T (13)
- H W (13)
No filters matching ""
