M-Clamping • KM20
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (28)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(28)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(28)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(28)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(28)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(28)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(28)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(28)
- M Stainless Steel (28)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(28)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(28)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(28)
- K Cast Iron (28)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(28)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(28)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(28)
- N Non-Ferrous Materials (28)
- N1Wrought Aluminum (28)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (28)
- N7MMC's (20)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(28)
- N3High-Silicon Aluminum Alloys Si >12.2%(18)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (28)
- N6Carbon, Graphite Composites, CFRP (28)
- S High-Temp Alloys (28)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(28)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(28)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(28)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(28)
- H Hardened Materials (20)
- H3Hardened Materials 56-60 HRC(20)
- H1Hardened Materials 44-48 HRC(20)
- H2Hardened Materials 48-55 HRC(20)
- H4Hardened Materials >60 HRC(20)
- C CFRP Materials (28)
- C1CFRP, CFRP / CFRP (28)
- C2CFRP / Aluminium CFRP / Non-Ferrous (20)
Applications
Applications
Facing (12)
Multiple Direction Cutting (26)
Plunge Turning (2)
Profiling (27)
Turning (27)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (28)
- Lightly Interrupted Cut (28)
- Smooth Cut (28)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (2)
- 93.0 (14)
- 95.0 (12)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (22)
- 1.0 (20)
- 2.0 (18)
- 3.0 (6)
- 4.0 (20)
- 6.0 (8)
- 8.0 (4)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 0.9843 in(15)
- 1.1811 in(12)
- 30.0 in(1)
to
Over All Length [L]
Over All Length [L]
- 1.181 mm(1)
- 25.0 mm(15)
- 30.0 mm(12)
to
Corner Radius
Corner Radius
- 0.004 in(18)
- 0.008 in(22)
- 0.014 in(2)
- 0.016 in(28)
- 0.024 in(4)
- 0.031 in(28)
- -0.039 in(22)
- 0.047 in(26)
- 0.063 in(16)
to
Corner Radius
Corner Radius
- 0.1 mm(18)
- 0.2 mm(22)
- 0.35 mm(2)
- 0.4 mm(28)
- 0.6 mm(4)
- 0.8 mm(28)
- -1.0 mm(22)
- 1.2 mm(26)
- 1.6 mm(16)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (16)
- CW5025 (12)
- K060 (4)
- K313 (20)
- K68 (16)
- KB1340 (8)
- KB1345 (10)
- KB1610 (18)
- KB1630 (14)
- KB5610 (12)
- KB5630 (12)
- KBH10 (20)
- KBH10B (16)
- KBH20 (20)
- KBH20B (16)
- KBK35 (4)
- KC5010 (28)
- KC5025 (26)
- KC5410 (20)
- KC730 (20)
- KC850 (20)
- KCK05 (28)
- KCK05B (10)
- KCK15 (26)
- KCK15B (26)
- KCK20 (24)
- KCK20B (26)
- KCM15 (26)
- KCM15B (28)
- KCM25 (28)
- KCM25B (26)
- KCM35 (20)
- KCM35B (14)
- KCP05 (24)
- KCP05B (26)
- KCP10 (28)
- KCP10B (28)
- KCP25 (28)
- KCP25B (28)
- KCP25C (28)
- KCP30 (28)
- KCP30B (16)
- KCP40 (16)
- KCP40B (22)
- KCPK05 (24)
- KCS10 (4)
- KCS10B (24)
- KCU10 (28)
- KCU10B (28)
- KCU25 (26)
- KCU25B (26)
- KD1400 (14)
- KD1405 (12)
- KD1425 (18)
- KS15 (4)
- KT315 (26)
- KT325 (4)
- KTP10 (26)
- KTP25S (20)
- KY1540 (4)
- KY1615 (4)
- KY3500 (20)
- KY4300 (8)
- KY4400 (20)
- KYHK15B (20)
- KYK10 (10)
- KYK25 (12)
- KYS25 (4)
- KYS30 (12)
- PB100 (4)
- SP4019 (4)
- THM (6)
- THM-X (6)
- THMF-X (6)
- TN10P (22)
- TN10U (20)
- TN15M (16)
- TN15U (14)
- TN2000 (14)
- TN20K (20)
- TN20P (28)
- TN30M (18)
- TN30P (12)
- TN4000 (14)
- TN6010 (6)
- TTS (4)
- WBH10P (12)
- WBH10U (4)
- WBH20P (20)
- WBH30P (12)
- WBK45U (4)
- WDN00U (8)
- WDN25U (18)
- WK05CT (26)
- WK15CT (14)
- WK20CT (26)
- WM15CT (26)
- WM25CT (26)
- WM35CT (22)
- WP05CT (8)
- WP15CT (26)
- WP25CT (26)
- WP35CT (20)
- WS10PT (26)
- WS25PT (26)
- WU10HT (26)
- WU10PT (22)
- WU25PT (22)
- X00580 (4)
- X00581 (4)
- X00582 (4)
- X00583 (4)
- X00584 (4)
- X00585 (4)
- X00586 (4)
- X00591 (4)
- X00592 (4)
- X00593 (4)
- X00594 (4)
- X00596 (4)
- X00597 (4)
- X00599 (4)
Hand Of Tool
Hand Of Tool
- L (14)
- R (14)
Wiper Insert
Wiper Insert
- N (28)
- Y (20)
F Dimension
F Dimension
- 12.5 mm(17)
- 16.0 mm(9)
- 22.0 mm(2)
to
F Dimension
F Dimension
- 0.4921 in(17)
- 0.6299 in(8)
- 0.63 in(1)
- 0.8661 in(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- -1.0 mm(22)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- -1.0 in(22)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 in(22)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 mm(22)
to
Cutting Direction
Cutting Direction
- B (12)
- S (15)
Front-End
Clamp Style
Clamp Style
- M (27)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (6)
- D-DIAMOND/RHOMBIC 55 (10)
- T-TRIANGLE 60 (2)
- V-DIAMOND/RHOMBIC 35 (4)
- W-TRIGON 80 (6)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (22)
- B L (20)
- C A (20)
- C N (20)
- D P (20)
- H T (26)
- H W (28)
Back-End
System Size
System Size
- KM20 (17)
- KM25 (11)
Back-End Diameter
Back-End Diameter
- 20.0 mm(17)
- 25.0 mm(10)
to
No filters matching ""
