Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

WIDIA Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Güçlü takımlama çözümleri indirimde. Şimdi satın alın.

    Modular Stability

    A stable modular drilling platform accompanied by three insert geometry types to machine a variety of applications. 

    TDMX was engineered with a secure pocket seat design to ensure maximum stability in challenging drilling applications like cross-hole, inclined extry/exit, and interrupted cuts.

    Product Features:

    • X pocket seat design to increase stability in high-demanding applications
    • Insert diameter range from .629"-1.574" (16mm-40mm)
    • Margin lands on the entire body to ensure straightness and hole quality
    • Improved chip evacuation
    • Coolant channel exit behind the cutting edge
    • Flanged shank for higher rigidity
    • Polished flutes for improved chip evacuation
    • Tapered insert seat z-axis
    • Engineered grades for material-specific applications
    • Available to regrind 3x
    • Front clamping design easily removed from the body without disassebling the body from the holder to change the insert

     

     

    Filtreleri Seçin
    Filtreler
    Filtreler
      Filtreleri şurada görüntüle
      Metrik
      İnç
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (340)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(340)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(340)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(340)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(340)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(340)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(340)
      • M Stainless Steel (440)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(440)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(440)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(440)
      • K Cast Iron (440)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(440)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(440)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(440)
      • N Non-Ferrous Materials (284)
        • N1
          Wrought Aluminum (284)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(284)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(284)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (284)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (284)
        • N6
          Carbon, Graphite Composites, CFRP (284)
        • N7
          MMC's (284)
      • S High-Temp Alloys (340)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(340)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(340)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(340)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(340)
      Select All Star
      • CN (44)
      • DE (52)
      • GB (5)
      • IN (4)
      • SG (49)
      • US (31)
      Applications
      Applications
      • Convex DrillingConvex Drilling (184)
      • DrillingDrilling (184)
      • Inclined Entry DrillingInclined Entry Drilling (184)
      • Inclined Exit DrillingInclined Exit Drilling (184)
      • Stacked Plates DrillingStacked Plates Drilling (184)
      Cutting Diameter
      Cutting Diameter
      • 0.63 in(13)
      • 0.638 in(12)
      • 0.641 in(13)
      • 0.65 in(13)
      • 0.656 in(13)
      • 0.669 in(13)
      • 0.672 in(13)
      • 0.689 in(12)
      • 0.69 in(13)
      • 0.694 in(12)
      • 0.702 in(12)
      • 0.704 in(12)
      • 0.709 in(13)
      • 0.719 in(12)
      • 0.728 in(13)
      • 0.734 in(12)
      • 0.74 in(12)
      • 0.748 in(13)
      • 0.75 in(13)
      • 0.756 in(12)
      • 0.759 in(12)
      • 0.766 in(12)
      • 0.768 in(13)
      • 0.776 in(12)
      • 0.781 in(13)
      • 0.787 in(13)
      • 0.791 in(12)
      • 0.795 in(12)
      • 0.797 in(12)
      • 0.799 in(12)
      • 0.803 in(12)
      • 0.807 in(13)
      • 0.811 in(12)
      • 0.814 in(12)
      • 0.816 in(12)
      • 0.82 in(12)
      • 0.824 in(12)
      • 0.828 in(13)
      • 0.844 in(12)
      • 0.846 in(13)
      • 0.866 in(13)
      • 0.875 in(12)
      • 0.884 in(12)
      • 0.886 in(13)
      • 0.906 in(13)
      • 0.925 in(13)
      • 0.937 in(12)
      • 0.946 in(13)
      • 0.965 in(13)
      • 0.969 in(12)
      • 0.984 in(13)
      • 1.0 in(13)
      • 1.004 in(13)
      • 1.012 in(14)
      • 1.014 in(12)
      • 1.016 in(12)
      • 1.024 in(13)
      • 1.032 in(12)
      • 1.039 in(13)
      • 1.043 in(13)
      • 1.047 in(12)
      • 1.063 in(13)
      • 1.083 in(13)
      • 1.094 in(12)
      • 1.102 in(13)
      • 1.109 in(12)
      • 1.122 in(13)
      • 1.125 in(12)
      • 1.143 in(13)
      • 1.156 in(12)
      • 1.161 in(13)
      • 1.172 in(12)
      • 1.181 in(13)
      • 1.188 in(12)
      • 1.201 in(13)
      • 1.219 in(12)
      • 1.22 in(13)
      • 1.24 in(13)
      • 1.25 in(13)
      • 1.26 in(9)
      • 1.28 in(9)
      • 1.299 in(9)
      • 1.313 in(8)
      • 1.339 in(9)
      • 1.344 in(8)
      • 1.375 in(8)
      • 1.379 in(9)
      • 1.399 in(9)
      • 1.417 in(9)
      • 1.437 in(9)
      • 1.457 in(9)
      • 1.476 in(9)
      • 1.496 in(9)
      • 1.5 in(9)
      • 1.508 in(7)
      • 1.516 in(9)
      • 1.536 in(9)
      • 1.547 in(7)
      • 1.555 in(9)
      • 1.575 in(9)
      Cutting Diameter Min-Cutting Diameter Max
      Cutting Diameter
      Cutting Diameter
      • 16.0 mm(13)
      • 16.2 mm(12)
      • 16.276 mm(13)
      • 16.5 mm(13)
      • 16.675 mm(13)
      • 17.0 mm(13)
      • 17.075 mm(13)
      • 17.475 mm(12)
      • 17.5 mm(13)
      • 17.6 mm(12)
      • 17.8 mm(12)
      • 17.85 mm(12)
      • 18.0 mm(13)
      • 18.25 mm(12)
      • 18.5 mm(13)
      • 18.651 mm(12)
      • 18.8 mm(12)
      • 19.0 mm(13)
      • 19.05 mm(13)
      • 19.201 mm(12)
      • 19.276 mm(12)
      • 19.451 mm(12)
      • 19.5 mm(13)
      • 19.701 mm(12)
      • 19.85 mm(13)
      • 20.0 mm(13)
      • 20.1 mm(12)
      • 20.201 mm(12)
      • 20.25 mm(12)
      • 20.3 mm(12)
      • 20.401 mm(12)
      • 20.5 mm(13)
      • 20.6 mm(12)
      • 20.651 mm(12)
      • 20.701 mm(12)
      • 20.8 mm(12)
      • 20.901 mm(12)
      • 21.0 mm(13)
      • 21.425 mm(12)
      • 21.5 mm(13)
      • 22.0 mm(13)
      • 22.225 mm(12)
      • 22.451 mm(12)
      • 22.5 mm(13)
      • 23.0 mm(13)
      • 23.5 mm(13)
      • 23.8 mm(12)
      • 24.0 mm(13)
      • 24.5 mm(13)
      • 24.6 mm(12)
      • 25.0 mm(13)
      • 25.401 mm(13)
      • 25.5 mm(13)
      • 25.675 mm(12)
      • 25.701 mm(12)
      • 25.75 mm(12)
      • 25.8 mm(12)
      • 26.0 mm(13)
      • 26.201 mm(12)
      • 26.401 mm(13)
      • 26.5 mm(13)
      • 26.6 mm(12)
      • 27.0 mm(13)
      • 27.5 mm(13)
      • 27.776 mm(12)
      • 28.0 mm(13)
      • 28.175 mm(12)
      • 28.5 mm(13)
      • 28.576 mm(12)
      • 29.0 mm(13)
      • 29.375 mm(12)
      • 29.5 mm(13)
      • 29.776 mm(12)
      • 30.0 mm(13)
      • 30.175 mm(12)
      • 30.5 mm(13)
      • 30.951 mm(12)
      • 31.0 mm(13)
      • 31.5 mm(13)
      • 31.75 mm(13)
      • 32.0 mm(9)
      • 32.5 mm(9)
      • 33.0 mm(9)
      • 33.35 mm(8)
      • 34.0 mm(9)
      • 34.125 mm(8)
      • 34.926 mm(8)
      • 35.0 mm(9)
      • 35.5 mm(9)
      • 36.0 mm(9)
      • 36.5 mm(9)
      • 37.0 mm(9)
      • 37.5 mm(9)
      • 38.0 mm(9)
      • 38.1 mm(9)
      • 38.301 mm(7)
      • 38.5 mm(9)
      • 39.0 mm(9)
      • 39.301 mm(7)
      • 39.5 mm(9)
      • 40.0 mm(9)
      Cutting Diameter Min-Cutting Diameter Max
      Maximum Hole Depth [L4]
      Maximum Hole Depth [L4]
      • 26.0 mm(2)
      • 27.0 mm(2)
      • 29.0 mm(2)
      • 30.0 mm(2)
      • 32.0 mm(2)
      • 33.0 mm(2)
      • 35.0 mm(2)
      • 36.0 mm(2)
      • 38.0 mm(2)
      • 39.0 mm(2)
      • 41.0 mm(2)
      • 42.0 mm(2)
      • 44.0 mm(2)
      • 45.0 mm(2)
      • 47.0 mm(2)
      • 48.0 mm(2)
      • 51.0 mm(2)
      • 54.0 mm(2)
      • 57.0 mm(2)
      • 60.0 mm(2)
      • 63.0 mm(2)
      • 66.0 mm(2)
      • 69.0 mm(2)
      • 72.0 mm(2)
      • 75.0 mm(2)
      • 78.0 mm(2)
      • 81.0 mm(2)
      • 84.0 mm(2)
      • 85.0 mm(2)
      • 87.0 mm(2)
      • 90.0 mm(4)
      • 93.0 mm(2)
      • 95.0 mm(2)
      • 96.0 mm(2)
      • 100.0 mm(2)
      • 102.0 mm(2)
      • 105.0 mm(2)
      • 108.0 mm(2)
      • 110.0 mm(2)
      • 114.0 mm(2)
      • 115.0 mm(2)
      • 120.0 mm(4)
      • 125.0 mm(2)
      • 130.0 mm(2)
      • 135.0 mm(2)
      • 136.0 mm(2)
      • 140.0 mm(2)
      • 144.0 mm(2)
      • 145.0 mm(2)
      • 150.0 mm(2)
      • 152.0 mm(2)
      • 155.0 mm(2)
      • 160.0 mm(4)
      • 168.0 mm(2)
      • 170.0 mm(2)
      • 176.0 mm(2)
      • 180.0 mm(2)
      • 184.0 mm(2)
      • 190.0 mm(2)
      • 192.0 mm(2)
      • 200.0 mm(4)
      • 204.0 mm(2)
      • 208.0 mm(2)
      • 216.0 mm(4)
      • 224.0 mm(2)
      • 228.0 mm(2)
      • 232.0 mm(2)
      • 240.0 mm(4)
      • 248.0 mm(2)
      • 252.0 mm(2)
      • 256.0 mm(2)
      • 264.0 mm(2)
      • 272.0 mm(2)
      • 276.0 mm(2)
      • 288.0 mm(4)
      • 300.0 mm(2)
      • 304.0 mm(2)
      • 312.0 mm(2)
      • 320.0 mm(2)
      • 324.0 mm(2)
      • 336.0 mm(2)
      • 348.0 mm(2)
      • 360.0 mm(2)
      • 372.0 mm(2)
      • 384.0 mm(2)
      Maximum Hole Depth [L4] Min-Maximum Hole Depth [L4] Max
      Maximum Hole Depth [L4]
      Maximum Hole Depth [L4]
      • 1.024 in(2)
      • 1.063 in(2)
      • 1.143 in(2)
      • 1.181 in(2)
      • 1.26 in(2)
      • 1.299 in(2)
      • 1.379 in(2)
      • 1.417 in(2)
      • 1.496 in(2)
      • 1.536 in(2)
      • 1.614 in(2)
      • 1.655 in(2)
      • 1.732 in(2)
      • 1.772 in(2)
      • 1.85 in(2)
      • 1.891 in(2)
      • 2.008 in(2)
      • 2.126 in(2)
      • 2.244 in(2)
      • 2.362 in(2)
      • 2.48 in(2)
      • 2.598 in(2)
      • 2.717 in(2)
      • 2.835 in(2)
      • 2.953 in(2)
      • 3.071 in(2)
      • 3.189 in(2)
      • 3.307 in(2)
      • 3.346 in(2)
      • 3.426 in(2)
      • 3.543 in(4)
      • 3.661 in(2)
      • 3.74 in(2)
      • 3.781 in(2)
      • 3.938 in(2)
      • 4.016 in(2)
      • 4.134 in(2)
      • 4.252 in(2)
      • 4.331 in(2)
      • 4.488 in(2)
      • 4.529 in(2)
      • 4.724 in(4)
      • 4.921 in(2)
      • 5.118 in(2)
      • 5.315 in(2)
      • 5.354 in(2)
      • 5.513 in(2)
      • 5.67 in(2)
      • 5.71 in(2)
      • 5.906 in(2)
      • 5.984 in(2)
      • 6.102 in(2)
      • 6.299 in(4)
      • 6.614 in(2)
      • 6.694 in(2)
      • 6.929 in(2)
      • 7.087 in(2)
      • 7.244 in(2)
      • 7.48 in(2)
      • 7.559 in(2)
      • 7.875 in(4)
      • 8.031 in(2)
      • 8.189 in(2)
      • 8.504 in(4)
      • 8.819 in(2)
      • 8.976 in(2)
      • 9.134 in(2)
      • 9.449 in(4)
      • 9.764 in(2)
      • 9.921 in(2)
      • 10.079 in(2)
      • 10.394 in(2)
      • 10.709 in(2)
      • 10.866 in(2)
      • 11.339 in(4)
      • 11.811 in(2)
      • 11.969 in(2)
      • 12.283 in(2)
      • 12.598 in(2)
      • 12.756 in(2)
      • 13.228 in(2)
      • 13.701 in(2)
      • 14.173 in(2)
      • 14.646 in(2)
      • 15.118 in(2)
      Maximum Hole Depth [L4] Min-Maximum Hole Depth [L4] Max
      Connection Style
      Connection Style
      • Cylindrical Shank 1 Flat (152)
      • Straight-Cylindrical w/Flange (32)
      Number of Flutes
      Number of Flutes
      • 2 (184)
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 4.173 in(2)
      • 4.291 in(2)
      • 4.646 in(2)
      • 4.764 in(2)
      • 4.882 in(2)
      • 5.0 in(2)
      • 5.118 in(2)
      • 5.157 in(2)
      • 5.236 in(2)
      • 5.354 in(2)
      • 5.513 in(2)
      • 5.63 in(2)
      • 5.748 in(4)
      • 5.867 in(2)
      • 5.945 in(2)
      • 5.984 in(2)
      • 6.102 in(4)
      • 6.22 in(2)
      • 6.299 in(2)
      • 6.339 in(2)
      • 6.457 in(2)
      • 6.496 in(2)
      • 6.654 in(2)
      • 6.772 in(2)
      • 6.969 in(2)
      • 7.165 in(2)
      • 7.244 in(2)
      • 7.323 in(2)
      • 7.521 in(4)
      • 7.678 in(2)
      • 7.756 in(2)
      • 7.875 in(2)
      • 8.031 in(4)
      • 8.228 in(2)
      • 8.268 in(2)
      • 8.504 in(2)
      • 8.544 in(2)
      • 8.898 in(2)
      • 8.937 in(2)
      • 8.976 in(2)
      • 9.214 in(2)
      • 9.331 in(2)
      • 9.449 in(2)
      • 9.488 in(2)
      • 9.685 in(2)
      • 9.724 in(2)
      • 9.882 in(2)
      • 9.961 in(2)
      • 10.039 in(2)
      • 10.236 in(4)
      • 10.472 in(2)
      • 10.63 in(2)
      • 10.749 in(2)
      • 10.984 in(2)
      • 11.182 in(2)
      • 11.378 in(2)
      • 11.654 in(2)
      • 11.733 in(2)
      • 11.89 in(2)
      • 12.166 in(2)
      • 12.283 in(2)
      • 12.48 in(2)
      • 12.638 in(2)
      • 12.677 in(2)
      • 13.031 in(4)
      • 13.189 in(2)
      • 13.387 in(2)
      • 13.544 in(2)
      • 13.781 in(2)
      • 14.094 in(2)
      • 14.134 in(2)
      • 14.528 in(2)
      • 14.606 in(2)
      • 15.157 in(2)
      • 15.669 in(2)
      • 15.827 in(2)
      • 16.378 in(2)
      • 16.417 in(2)
      • 16.89 in(2)
      • 17.165 in(2)
      • 17.441 in(2)
      • 17.913 in(2)
      • 17.953 in(2)
      • 18.504 in(2)
      • 19.017 in(2)
      • 19.567 in(2)
      Over All Length [L] Min-Over All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 106.0 mm(2)
      • 109.0 mm(2)
      • 118.0 mm(2)
      • 121.0 mm(2)
      • 124.0 mm(2)
      • 127.0 mm(2)
      • 130.0 mm(2)
      • 131.0 mm(2)
      • 133.0 mm(2)
      • 136.0 mm(2)
      • 140.0 mm(2)
      • 143.0 mm(2)
      • 146.0 mm(4)
      • 149.0 mm(2)
      • 151.0 mm(2)
      • 152.0 mm(2)
      • 155.0 mm(4)
      • 158.0 mm(2)
      • 160.0 mm(2)
      • 161.0 mm(2)
      • 164.0 mm(2)
      • 165.0 mm(2)
      • 169.0 mm(2)
      • 172.0 mm(2)
      • 177.0 mm(2)
      • 182.0 mm(2)
      • 184.0 mm(2)
      • 186.0 mm(2)
      • 191.0 mm(4)
      • 195.0 mm(2)
      • 197.0 mm(2)
      • 200.0 mm(2)
      • 204.0 mm(4)
      • 209.0 mm(2)
      • 210.0 mm(2)
      • 216.0 mm(2)
      • 217.0 mm(2)
      • 226.0 mm(2)
      • 227.0 mm(2)
      • 228.0 mm(2)
      • 234.0 mm(2)
      • 237.0 mm(2)
      • 240.0 mm(2)
      • 241.0 mm(2)
      • 246.0 mm(2)
      • 247.0 mm(2)
      • 251.0 mm(2)
      • 253.0 mm(2)
      • 255.0 mm(2)
      • 260.0 mm(4)
      • 266.0 mm(2)
      • 270.0 mm(2)
      • 273.0 mm(2)
      • 279.0 mm(2)
      • 284.0 mm(2)
      • 289.0 mm(2)
      • 296.0 mm(2)
      • 298.0 mm(2)
      • 302.0 mm(2)
      • 309.0 mm(2)
      • 312.0 mm(2)
      • 317.0 mm(2)
      • 321.0 mm(2)
      • 322.0 mm(2)
      • 331.0 mm(4)
      • 335.0 mm(2)
      • 340.0 mm(2)
      • 344.0 mm(2)
      • 350.0 mm(2)
      • 358.0 mm(2)
      • 359.0 mm(2)
      • 369.0 mm(2)
      • 371.0 mm(2)
      • 385.0 mm(2)
      • 398.0 mm(2)
      • 402.0 mm(2)
      • 416.0 mm(2)
      • 417.0 mm(2)
      • 429.0 mm(2)
      • 436.0 mm(2)
      • 443.0 mm(2)
      • 455.0 mm(2)
      • 456.0 mm(2)
      • 470.0 mm(2)
      • 483.0 mm(2)
      • 497.0 mm(2)
      Over All Length [L] Min-Over All Length [L] Max
      cornerConfiguration
      Corner Chamfer
      Corner Chamfer
      • 0.0 mm(256)
      Corner Chamfer Min-Corner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 in(256)
      Corner Chamfer Min-Corner Chamfer Max
      application
      Minimum Depth of Cut
      Minimum Feed
      Minimum Feed
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • WM15PD (284)
      • WP40PD (340)
      Hand Of Tool
      Hand Of Tool
      • R (184)
      Wiper Insert
      Wiper Insert
      • N (256)
      Drill Type
      Drill Type
      • 86-01 (184)
      frontEnd
      Point Angle
      Point Angle
      • 140.0 (384)
      • 150.0 (240)
      Point Angle Min-Point Angle Max
      insertGeometry
      Shape
      Shape
      • TDMX DRILL (256)
      Insert Seat Size
      Insert Seat Size
      • A (14)
      • B (17)
      • C (12)
      • D (20)
      • E (26)
      • F (8)
      • G (10)
      • H (8)
      • I (8)
      • J (17)
      • K (13)
      • L (8)
      • M (10)
      • N (10)
      • O (10)
      • P (9)
      • Q (11)
      • R (13)
      • S (12)
      • T (20)
      Cutting Tool Material
      Cutting Tool Material
      • H W (256)
      Cutting Diameter Insert
      Cutting Diameter Insert
      • 0.63 in(3)
      • 0.638 in(2)
      • 0.641 in(3)
      • 0.65 in(3)
      • 0.656 in(3)
      • 0.669 in(3)
      • 0.672 in(3)
      • 0.689 in(2)
      • 0.69 in(3)