Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

WIDIA Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Güçlü takımlama çözümleri indirimde. Şimdi satın alın.

    M100 Serisi

    Filtreleri Seçin
    Filtreler
    Filtreler
      Filtreleri şurada görüntüle
      Metrik
      İnç
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (62)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(60)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(62)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(62)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(62)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(62)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(59)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(59)
      • M Stainless Steel (59)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(59)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(59)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(59)
      • K Cast Iron (60)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(60)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(60)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(60)
      • N Non-Ferrous Materials (27)
        • N1
          Wrought Aluminum (27)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(27)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(26)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (1)
      • S High-Temp Alloys (57)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(49)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(49)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(49)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(57)
      • H Hardened Materials (12)
        • H1
          Hardened Materials 44-48 HRC(12)
      Select All Star
      • CN (10)
      • DE (29)
      • GB (1)
      • SG (9)
      • US (11)
      Applications
      Applications
      • Face MillingFace Milling (37)
      • PocketPocket (37)
      • Pocket HelicalPocket Helical (37)
      • Pocket MillingPocket Milling (37)
      • Profile MillingProfile Milling (37)
      • RampingRamping (37)
      • Shoulder Ball NoseShoulder Ball Nose (37)
      • Shoulder MillingShoulder Milling (37)
      • Slot MillingSlot Milling (37)
      • Slot Square EndSlot Square End (37)
      Cutting Diameter
      Cutting Diameter
      • 0.315 in(3)
      • 0.356 in(1)
      • 0.394 in(2)
      • 0.435 in(1)
      • 0.473 in(1)
      • 0.582 in(1)
      • 0.591 in(1)
      • 0.63 in(3)
      • 0.779 in(1)
      • 0.787 in(1)
      • 0.906 in(1)
      • 1.102 in(1)
      • 1.339 in(2)
      • 1.37 in(1)
      • 1.417 in(1)
      • 1.496 in(1)
      • 1.53 in(1)
      • 1.575 in(1)
      • 1.85 in(2)
      • 1.969 in(1)
      • 2.008 in(1)
      • 2.52 in(2)
      • 2.677 in(1)
      • 3.307 in(2)
      • 3.465 in(1)
      • 4.291 in(2)
      • 5.67 in(1)
      Cutting Diameter Min-Cutting Diameter Max
      Cutting Diameter
      Cutting Diameter
      • 8.0 mm(3)
      • 9.05 mm(1)
      • 10.0 mm(2)
      • 11.05 mm(1)
      • 12.0 mm(1)
      • 14.775 mm(1)
      • 15.0 mm(1)
      • 16.0 mm(3)
      • 19.776 mm(1)
      • 20.0 mm(1)
      • 23.0 mm(1)
      • 28.0 mm(1)
      • 34.0 mm(2)
      • 34.801 mm(1)
      • 36.0 mm(1)
      • 38.0 mm(1)
      • 38.85 mm(1)
      • 40.0 mm(1)
      • 47.0 mm(2)
      • 50.0 mm(1)
      • 51.0 mm(1)
      • 64.0 mm(2)
      • 68.0 mm(1)
      • 84.0 mm(2)
      • 88.0 mm(1)
      • 109.0 mm(2)
      • 144.0 mm(1)
      Cutting Diameter Min-Cutting Diameter Max
      Maximum Cutting Diameter
      Maximum Cutting Diameter
      • 16.0 mm(3)
      • 19.05 mm(2)
      • 20.0 mm(2)
      • 24.0 mm(1)
      • 25.0 mm(1)
      • 25.401 mm(1)
      • 26.0 mm(2)
      • 30.0 mm(1)
      • 31.75 mm(1)
      • 32.0 mm(1)
      • 35.0 mm(1)
      • 40.0 mm(1)
      • 50.0 mm(3)
      • 50.801 mm(2)
      • 52.0 mm(2)
      • 63.0 mm(3)
      • 66.0 mm(1)
      • 80.0 mm(3)
      • 100.0 mm(3)
      • 125.0 mm(2)
      • 160.0 mm(1)
      Maximum Cutting Diameter Min-Maximum Cutting Diameter Max
      Maximum Cutting Diameter
      Maximum Cutting Diameter
      • 0.63 in(3)
      • 0.75 in(2)
      • 0.787 in(2)
      • 0.946 in(1)
      • 0.984 in(1)
      • 1.0 in(1)
      • 1.024 in(2)
      • 1.181 in(1)
      • 1.25 in(1)
      • 1.26 in(1)
      • 1.379 in(1)
      • 1.575 in(1)
      • 1.969 in(3)
      • 2.0 in(2)
      • 2.047 in(2)
      • 2.48 in(3)
      • 2.598 in(1)
      • 3.15 in(3)
      • 3.938 in(3)
      • 4.921 in(2)
      • 6.299 in(1)
      Maximum Cutting Diameter Min-Maximum Cutting Diameter Max
      Cutting Length
      Cutting Length
      • 4.0 mm(4)
      • 5.0 mm(7)
      • 6.0 mm(11)
      • 8.0 mm(15)
      Cutting Length Min-Cutting Length Max
      Cutting Length
      Cutting Length
      • 0.157 in(4)
      • 0.197 in(7)
      • 0.237 in(11)
      • 0.315 in(15)
      Cutting Length Min-Cutting Length Max
      Reach
      Reach
      • 1.181 in(2)
      • 1.575 in(14)
      • 1.631 in(2)
      • 1.969 in(8)
      • 2.4 in(1)
      • 2.48 in(1)
      • 3.15 in(3)
      • 3.19 in(1)
      • 3.228 in(1)
      • 3.86 in(1)
      • 4.0 in(1)
      • 4.921 in(2)
      Reach Min-Reach Max
      Reach
      Reach
      • 30.0 mm(2)
      • 40.0 mm(14)
      • 41.401 mm(2)
      • 50.0 mm(8)
      • 60.95 mm(1)
      • 63.0 mm(1)
      • 80.0 mm(3)
      • 81.025 mm(1)
      • 82.0 mm(1)
      • 98.051 mm(1)
      • 101.601 mm(1)
      • 125.0 mm(2)
      Reach Min-Reach Max
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 90.0 (37)
      Tool Cutting Edge Angle Min-Tool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • A-Socket Head Cap Screw (7)
      • B-Cutter Retention Screw (12)
      • SHCS or RetScrw Or BoltCircle (1)
      • Screw-On Connection (5)
      • Weldon (12)
      Number of Flutes
      Number of Flutes
      • 2 (14)
      • 3 (2)
      • 4 (8)
      • 5 (5)
      • 6 (4)
      • 7 (2)
      • 8 (1)
      • 9 (1)
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.575 in(9)
      • 1.631 in(2)
      • 1.969 in(8)
      • 2.047 in(2)
      • 2.48 in(4)
      • 3.543 in(1)
      • 3.622 in(1)
      • 4.53 in(1)
      • 5.197 in(1)
      • 5.433 in(1)
      • 5.53 in(1)
      • 5.591 in(2)
      • 6.15 in(1)
      • 6.28 in(1)
      • 7.205 in(1)
      • 7.362 in(1)
      Over All Length [L] Min-Over All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 40.0 mm(9)
      • 41.401 mm(2)
      • 50.0 mm(8)
      • 52.0 mm(2)
      • 63.0 mm(4)
      • 90.0 mm(1)
      • 92.0 mm(1)
      • 115.051 mm(1)
      • 132.0 mm(1)
      • 138.0 mm(1)
      • 140.451 mm(1)
      • 142.0 mm(2)
      • 156.201 mm(1)
      • 159.5 mm(1)
      • 183.0 mm(1)
      • 187.0 mm(1)
      Over All Length [L] Min-Over All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.157 in(7)
      • 0.197 in(13)
      • 0.237 in(25)
      • 0.315 in(25)
      Corner Radius Min-Corner Radius Max
      Corner Radius
      Corner Radius
      • 4.0 mm(7)
      • 5.0 mm(13)
      • 6.0 mm(25)
      • 8.0 mm(25)
      Corner Radius Min-Corner Radius Max
      application
      Minimum Depth of Cut
      Minimum Depth of Cut
      Minimum Feed
      Minimum Feed
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • THM (39)
      • TN2510 (36)
      • TN25M (17)
      • TN450 (36)
      • TN5015 (8)
      • TN5020 (8)
      • TN5515 (36)
      • TN6525 (39)
      • TN6540 (45)
      • TN7015 (8)
      • TN7035 (8)
      • TN7110 (8)
      • TN7115 (1)
      • TN7135 (9)
      • TN7525 (36)
      • TN7535 (36)
      • TTI25 (36)
      • TTM (23)
      • TTM08 (27)
      • TTM09 (4)
      • WK15CM (23)
      • WP35CM (44)
      • WS30PM (12)
      • WS40PM (13)
      Hand Of Tool
      Hand Of Tool
      • R (37)
      Wiper Insert
      Wiper Insert
      • N (33)
      Maximum Ramp Angle
      Maximum Ramp Angle
      • 1.25 (1)
      • 1.75 (1)
      • 2.25 (1)
      • 2.5 (1)
      • 2.75 (2)
      • 3.5 (1)
      • 3.75 (2)
      • 4.0 (1)
      • 4.5 (1)
      • 4.75 (1)
      • 5.75 (1)
      • 6.0 (1)
      • 6.5 (1)
      • 6.75 (1)
      • 7.0 (1)
      • 7.5 (3)
      • 7.75 (2)
      • 8.25 (1)
      • 8.75 (1)
      • 10.0 (2)
      • 10.25 (2)
      • 10.75 (1)
      • 12.0 (1)
      • 13.5 (1)
      • 14.25 (1)
      • 15.75 (1)
      • 22.0 (1)
      • 23.0 (1)
      • 40.0 (1)
      • 50.0 (1)
      Maximum Ramp Angle Min-Maximum Ramp Angle Max
      frontEnd
      Center Cutting
      Center Cutting
      insertGeometry
      Shape
      Shape
      • R-ROUND (33)
      Insert IC Size
      Insert IC Size
      • 8.0 mm(3)
      • 10.0 mm(6)
      • 12.0 mm(14)
      • 16.0 mm(10)
      Insert IC Size Min-Insert IC Size Max
      Insert IC Size
      Insert IC Size
      • 0.315 in(3)
      • 0.394 in(6)
      • 0.473 in(14)
      • 0.63 in(10)
      Insert IC Size Min-Insert IC Size Max
      Chip Breaker CBMD
      Chip Breaker CBMD
      • 43 (2)
      • MMX (4)
      • X (11)
      Cutting Tool Material
      Cutting Tool Material
      • H W (33)
      Tolerance Class
      Tolerance Class
      • M (29)
      • P (4)
      backEnd
      Connection Type
      Connection Type
      • CYLINDRICAL (12)
      • SCREW-ON (5)
      • SHELL MILL (20)
      Back-End Diameter
      Back-End Diameter
      • 16.0 mm(1)
      • 19.05 mm(3)
      • 20.0 mm(2)
      • 22.0 mm(7)
      • 25.0 mm(2)
      • 25.401 mm(2)
      • 27.0 mm(7)
      • 28.0 mm(3)
      • 31.75 mm(1)
      • 32.0 mm(6)
      • 40.0 mm(3)
      Back-End Diameter Min-Back-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.63 in(1)
      • 0.75 in(3)
      • 0.787 in(2)
      • 0.866 in(7)
      • 0.984 in(2)
      • 1.0 in(2)
      • 1.063 in(7)
      • 1.102 in(3)
      • 1.25 in(1)
      • 1.26 in(6)
      • 1.575 in(3)
      Back-End Diameter Min-Back-End Diameter Max
      No filters matching ""

      Takım Gövdeleri

      (37)Takım Gövdeleri

      Kesici uçlar

      (33)Kesici uçlar
      öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
      product-image
      Please adjust the following properties from

      ISO Katalog Numarası

      ANSI Katalog Numarası

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      Product data

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Pano bilgilerinizi görmek için oturum açmalısınız
      Session expired due to inactivity, please login again
      Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
      ürün(ler) sepete başarıyla eklendi
      Sepeti Görüntüle

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberISO Katalog NumarasıKalite  

      You are about to leave the Solution building process.

      Are you sure you want to leave?