Kanal açma frezeleri

Filtreleri Seçin
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (88)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(88)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(88)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(88)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(88)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(88)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(77)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(77)
    • M Stainless Steel (77)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(77)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(77)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(77)
    • K Cast Iron (83)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(83)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(83)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(83)
    • N Non-Ferrous Materials (54)
      • N1
        Wrought Aluminum (54)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(54)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(54)
    • S High-Temp Alloys (76)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(67)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(67)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(67)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(76)
    • H Hardened Materials (40)
      • H1
        Hardened Materials 44-48 HRC(40)
    Applications
    Applications
    • Shoulder MillingShoulder Milling (36)
    • Shoulder Square EndShoulder Square End (36)
    • Slot MillingSlot Milling (60)
    • Slot SideSlot Side (60)
    • Slot TSlot T (4)
    Cutting Diameter
    Cutting Diameter
    • 0.98 in(1)
    • 0.984 in(1)
    • 1.256 in(1)
    • 1.57 in(1)
    • 1.575 in(1)
    • 1.964 in(1)
    • 2.48 in(1)
    • 3.15 in(1)
    • 3.938 in(8)
    • 4.921 in(10)
    • 6.299 in(10)
    • 7.875 in(12)
    • 9.843 in(6)
    • 12.403 in(6)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 24.901 mm(1)
    • 25.0 mm(1)
    • 31.875 mm(1)
    • 39.875 mm(1)
    • 40.0 mm(1)
    • 49.875 mm(1)
    • 63.0 mm(1)
    • 80.0 mm(1)
    • 100.0 mm(8)
    • 125.0 mm(10)
    • 160.0 mm(10)
    • 200.0 mm(12)
    • 250.0 mm(6)
    • 315.0 mm(6)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 4.0 mm(2)
    • 6.0 mm(2)
    • 7.0 mm(3)
    • 8.0 mm(4)
    • 10.0 mm(3)
    • 10.951 mm(1)
    • 12.0 mm(8)
    • 13.851 mm(1)
    • 14.0 mm(8)
    • 16.0 mm(10)
    • 17.5 mm(6)
    • 17.85 mm(1)
    • 20.0 mm(6)
    • 21.85 mm(1)
    Cutting Length Min-Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.157 in(2)
    • 0.237 in(2)
    • 0.276 in(3)
    • 0.315 in(4)
    • 0.394 in(3)
    • 0.431 in(1)
    • 0.473 in(8)
    • 0.545 in(1)
    • 0.551 in(8)
    • 0.63 in(10)
    • 0.69 in(6)
    • 0.704 in(1)
    • 0.787 in(6)
    • 0.86 in(1)
    Cutting Length Min-Cutting Length Max
    Reach
    Reach
    • 1.26 in(1)
    • 1.575 in(1)
    • 1.655 in(1)
    • 1.732 in(4)
    • 1.762 in(1)
    • 1.811 in(1)
    • 1.929 in(1)
    • 1.969 in(4)
    • 2.037 in(2)
    • 2.087 in(2)
    • 2.362 in(1)
    Reach Min-Reach Max
    Reach
    Reach
    • 32.0 mm(1)
    • 40.0 mm(1)
    • 42.0 mm(1)
    • 44.0 mm(4)
    • 44.75 mm(1)
    • 46.0 mm(1)
    • 49.0 mm(1)
    • 50.0 mm(4)
    • 51.75 mm(2)
    • 53.0 mm(2)
    • 60.0 mm(1)
    Reach Min-Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (60)
    Tool Cutting Edge Angle Min-Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • 2 Key & Cutter Retention Screw (41)
    • A-Socket Head Cap Screw (2)
    • C-Bolt Circle (6)
    • SHCS or RetScrw Or BoltCircle (5)
    • Weldon (4)
    • Weldon With Thread (2)
    Number of Flutes
    Number of Flutes
    • 10 (6)
    • 12 (5)
    • 16 (3)
    • 2 (4)
    • 20 (3)
    • 3 (6)
    • 4 (5)
    • 5 (6)
    • 6 (13)
    • 8 (7)
    • 9 (2)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 2.0 (70)
    • 3.0 (10)
    • 4.0 (25)
    Cutting Edges Per Insert Min-Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(1)
    • 1.732 in(3)
    • 1.762 in(1)
    • 1.811 in(1)
    • 1.969 in(3)
    • 2.037 in(2)
    • 2.087 in(2)
    • 3.15 in(1)
    • 3.543 in(1)
    • 3.938 in(1)
    • 4.134 in(1)
    • 4.331 in(1)
    • 4.724 in(1)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(1)
    • 44.0 mm(3)
    • 44.75 mm(1)
    • 46.0 mm(1)
    • 50.0 mm(3)
    • 51.75 mm(2)
    • 53.0 mm(2)
    • 80.0 mm(1)
    • 90.0 mm(1)
    • 100.0 mm(1)
    • 105.0 mm(1)
    • 110.0 mm(1)
    • 120.0 mm(1)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(35)
    • 0.016 in(5)
    • 0.031 in(65)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(35)
    • 0.4 mm(5)
    • 0.8 mm(65)
    Corner Radius Min-Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(80)
    • 0.151 mm(25)
    Corner Chamfer Min-Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(80)
    • 0.006 in(25)
    Corner Chamfer Min-Corner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (63)
    • TN450 (38)
    • TN5515 (41)
    • TN7525 (50)
    • TN7535 (42)
    • TTM (15)
    • TTM08 (40)
    • TTM09 (14)
    • TTR (54)
    • WK15CM (61)
    • WP25PM (40)
    • WP35CM (64)
    • WP40PM (64)
    • WU35PM (40)
    Hand Of Tool
    Hand Of Tool
    • N (52)
    • R (8)
    Wiper Insert
    Wiper Insert
    • N (48)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.076 in(1)
    • 0.088 in(1)
    • 0.107 in(3)
    • 0.128 in(3)
    • 0.157 in(2)
    • 0.167 in(2)
    • 0.237 in(2)
    • 0.276 in(3)
    • 0.315 in(4)
    • 0.394 in(3)
    • 0.431 in(1)
    • 0.473 in(8)
    • 0.545 in(1)
    • 0.551 in(8)
    • 0.63 in(10)
    • 0.69 in(6)
    • 0.704 in(1)
    • 0.787 in(6)
    • 0.86 in(1)
    Cutting Width Min-Cutting Width Max
    Cutting Width
    Cutting Width
    • 1.925 mm(1)
    • 2.225 mm(1)
    • 2.725 mm(3)
    • 3.25 mm(3)
    • 4.0 mm(2)
    • 4.25 mm(2)
    • 6.0 mm(2)
    • 7.0 mm(3)
    • 8.0 mm(4)
    • 10.0 mm(3)
    • 10.951 mm(1)
    • 12.0 mm(8)
    • 13.851 mm(1)
    • 14.0 mm(8)
    • 16.0 mm(10)
    • 17.5 mm(6)
    • 17.85 mm(1)
    • 20.0 mm(6)
    • 21.85 mm(1)
    Cutting Width Min-Cutting Width Max
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (21)
    • M-DIAMOND/RHOMBIC 86 (49)
    • ON EDGE MISC (10)
    • S-SQUARE ON EDGE 90 (25)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.243 in(1)
    • 0.332 in(1)
    • 0.412 in(1)
    • 0.488 in(1)
    • 0.906 in(4)
    • 0.984 in(4)
    • 1.181 in(6)
    • 1.28 in(4)
    • 1.655 in(6)
    • 1.772 in(4)
    • 1.891 in(10)
    • 2.087 in(6)
    • 2.48 in(2)
    • 3.386 in(6)
    Maximum Cutting Depth Min-Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 6.176 mm(1)
    • 8.425 mm(1)
    • 10.451 mm(1)
    • 12.4 mm(1)
    • 23.0 mm(4)
    • 25.0 mm(4)
    • 30.0 mm(6)
    • 32.5 mm(4)
    • 42.0 mm(6)
    • 45.0 mm(4)
    • 48.0 mm(10)
    • 53.0 mm(6)
    • 63.0 mm(2)
    • 86.0 mm(6)
    Maximum Cutting Depth Min-Maximum Cutting Depth Max
    Neck Diameter
    Neck Diameter
    • 0.494 in(1)
    • 0.591 in(1)
    • 0.748 in(1)
    • 0.807 in(1)
    • 0.987 in(1)
    • 1.252 in(1)
    Neck Diameter Min-Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 12.55 mm(1)
    • 15.0 mm(1)
    • 19.0 mm(1)
    • 20.5 mm(1)
    • 25.076 mm(1)
    • 31.8 mm(1)
    Neck Diameter Min-Neck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • C-DIAMOND/RHOMBIC 80 (17)
    • M-DIAMOND/RHOMBIC 86 (11)
    • ON EDGE MISC (7)
    • S-SQUARE ON EDGE 90 (13)
    Insert IC Size
    Insert IC Size
    • 6.351 mm(6)
    • 7.95 mm(5)
    • 9.525 mm(15)
    • 11.0 mm(5)
    • 12.701 mm(17)
    Insert IC Size Min-Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.25 in(6)
    • 0.313 in(5)
    • 0.375 in(15)
    • 0.433 in(5)
    • 0.5 in(17)
    Insert IC Size Min-Insert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 6.45 mm(4)
    • 8.05 mm(5)
    • 9.55 mm(6)
    • 9.675 mm(4)
    • 11.0 mm(5)
    • 12.701 mm(8)
    • 12.726 mm(5)
    • 12.9 mm(4)
    Cutting Edge Length Min-Cutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.254 in(4)
    • 0.317 in(5)
    • 0.376 in(6)
    • 0.381 in(4)
    • 0.433 in(5)
    • 0.5 in(8)
    • 0.501 in(5)
    • 0.508 in(4)
    Cutting Edge Length Min-Cutting Edge Length Max
    Cutting Tool Material
    Cutting Tool Material
    • H W (48)
    Tolerance Class
    Tolerance Class
    • H (24)
    • N (17)
    backEnd
    Connection Type
    Connection Type
    • ARBOR (41)
    • CYLINDRICAL (6)
    • SHELL MILL (13)
    Back-End Diameter
    Back-End Diameter
    • 16.0 mm(2)
    • 22.0 mm(1)
    • 25.0 mm(2)
    • 27.0 mm(7)
    • 32.0 mm(7)
    • 40.0 mm(22)
    • 50.0 mm(10)
    • 60.0 mm(9)
    Back-End Diameter Min-Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.63 in(2)
    • 0.866 in(1)
    • 0.984 in(2)
    • 1.063 in(7)
    • 1.26 in(7)
    • 1.575 in(22)
    • 1.969 in(10)
    • 2.362 in(9)
    Back-End Diameter Min-Back-End Diameter Max
    No filters matching ""
    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Katalog Numarası Kalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)