Country

Dil

Ölçü Birimi

Liste fiyatı:

İndirim: %

Liste fiyatı:

$49.74 /her biri

Fiyatınız::

Miktar

Configure

ALUFLASH™ Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

SDS

ALUFLASH • Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

Name: ALUFLASH • Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch
SKU: 6853353
Rating: 0 (0 reviews)

ALUFLASH™ Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

Metrik

İnç

SAP Material Number	6853353
ISO Catalog Number	3A09E08004RAT
ANSI Catalog Number	3A09E08004RAT
Grade	UNCOATED
Adapter Style Machine Side	Straight-Cylindrical
[D1] Effective Cutting Diameter	7.938 mm
[D1] Effective Cutting Diameter	.3125 in
[D] Adapter / Shank / Bore Diameter	7.938 mm
[D] Adapter / Shank / Bore Diameter	.3125 in
[AP1MAX] 1st Maximum Cutting Depth	15.875 mm
[AP1MAX] 1st Maximum Cutting Depth	.625 in
[L] Overall Length	63.5 mm
[L] Overall Length	2.5 in
[Re] Corner Radius	0.381 mm
[Re] Corner Radius	.015 in
[Z] Number of Flutes	3

Tüm Ürün Değişkenlerini görün

Kullanım ve uygulama alanları

Trochoidal Milling
Drilling
Helical Milling
Plunge Milling
Ramping: Blank
Slotting: Square End
Side Milling/Shoulder Milling: Square End

İş Parçası Malzemeleri

N Non-Ferrous

Makine Tarafı

yükleniyor...

İş Parçası Tarafı

yükleniyor...

Uyumlu Parçalar
Uygulama bilgisi

Material Group		Helical Interpolation / Ramping 0° - 15°	<="" td="">		<="" td="">	<="" td="" />
			UNCOATED			Recommended feed per tooth (fz = IPT) for helical interpolation and ramping fz x 1
			Cutting Speed Vc m/min			Diameter D1 [Ømin Ømax]
			Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
		Max Depth	Min	Start	Max	Decimals	.180-.180	.180-.297	.216-.356	.288-.475	.359-.594	.431-.713	.575-.950	.633-1.047	.719-1.188	.814-1.346	.863-1.425	1.150-1.900
N	1	1.25 x D1	1500	1800	6000	IPT	.0009	.0017	.0022	.0026	.0035	.0043	.0052	.0060	.0069	.0078	.0087	.0108
	2	1.25 x D1	1500	1800	4500	IPT	.0008	.0016	.0019	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097
	3	1.25 x D1	1500	1800	4500	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	4	1.25 x D1	1200	1350	2250	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	5	1.25 x D1	750	1200	3000	IPT	.0008	.0016	.0020	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097

Material Group		Helical Interpolation / Ramping 15° - 30°	<="" td="">		<="" td="">	<="" td="" />
			UNCOATED			Recommended feed per tooth (fz = IPT) for helical interpolation and ramping fz x 1
			Cutting Speed Vc m/min			Diameter D1 [Ømin Ømax]
			Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
		Max Depth	Min	Start	Max	Decimals	.180-.180	.180-.297	.216-.356	.288-.475	.359-.594	.431-.713	.575-.950	.633-1.047	.719-1.188	.814-1.346	.863-1.425	1.150-1.900
N	1	1.25 x D1	1500	1800	4800	IPT	.0006	.0013	.0016	.0019	.0026	.0032	.0039	.0045	.0052	.0058	.0065	.0081
	2	1.25 x D1	1500	1800	3600	IPT	.0006	.0012	.0014	.0018	.0023	.0029	.0035	.0041	.0047	.0053	.0058	.0073
	3	1.25 x D1	1500	1800	3600	IPT	.0005	.0009	.0011	.0014	.0018	.0023	.0027	.0032	.0036	.0041	.0045	.0057
	4	1.25 x D1	1200	1350	1800	IPT	.0005	.0009	.0011	.0014	.0018	.0023	.0027	.0032	.0036	.0041	.0045	.0057
	5	1.25 x D1	750	1200	2400	IPT	.0006	.0012	.0015	.0018	.0023	.0029	.0035	.0041	.0047	.0053	.0058	.0073

Material Group		Helical Interpolation / Ramping 30° - 45°	<="" td="">		<="" td="">	<="" td="" />
			UNCOATED			Recommended feed per tooth (fz = IPT) for helical interpolation and ramping fz x 1
			Cutting Speed Vc m/min			Diameter D1 [Ømin Ømax]
			Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
		Max Depth	Min	Start	Max	Decimals	.180-.180	.180-.297	.216-.356	.288-.475	.359-.594	.431-.713	.575-.950	.633-1.047	.719-1.188	.814-1.346	.863-1.425	1.150-1.900
N	1	1.25 x D1	1260	1500	2400	IPT	.0005	.0010	.0013	.0016	.0021	.0026	.0031	.0036	.0042	.0047	.0052	.0065
	2	1.25 x D1	1260	1500	2400	IPT	.0005	.0009	.0011	.0014	.0019	.0023	.0028	.0033	.0037	.0042	.0047	.0058
	3	1.25 x D1	1260	1500	2400	IPT	.0004	.0007	.0009	.0011	.0015	.0018	.0022	.0025	.0029	.0033	.0036	.0045
	4	1.25 x D1	1020	1140	1350	IPT	.0004	.0007	.0009	.0011	.0015	.0018	.0022	.0025	.0029	.0033	.0036	.0045
	5	1.25 x D1	630	1020	1800	IPT	.0005	.0009	.0012	.0014	.0019	.0023	.0028	.0033	.0037	.0042	.0047	.0058

Material Group		<="" td="">		<="" td="">	<="" td="" />
		Plunging/Drilling			UNCOATED			Recommended feed per revolution (fn =IPR) for plunging 2-flute end mills
					Cutting Speed Vc SFM				D1 Diameter
		Max Depth	Applicable	Coolant	Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	1.5 x D		Required	360	780	1200	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118
	2	1.5 x D		Required	360	750	840	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118
	3	1.5 x D		Required	300	600	780	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118
	4	1 x D		Required	180	450	780	IPR	.0024	.0031	.0039	.0047	.0055	.0063	.0079	.0083	.0087	.0093	.0098	.0110
	5	1.5 x D		Required	180	600	1200	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118

Material Group		<="" td="">		<="" td="">	<="" td="" />
		Plunging/Drilling			UNCOATED			Recommended feed per revolution (fn =IPR) for plunging 3-flute end mills
					Cutting Speed Vc SFM				D1 Diameter
		Max Depth	Applicable	Coolant	Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	1,5 x D		Required	360	780	1200	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083
	2	1,5 x D		Required	360	750	840	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083
	3	1,5 x D		Required	300	600	780	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083
	4	1 x D		Required	180	450	780	IPR	.0017	.0022	.0028	.0033	.0039	.0044	.0055	.0058	.0061	.0065	.0069	.0077
	5	1,5 x D		Required	180	600	1200	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083

Material Group		<="" td="">		<="" td="">	<="" td="" />
		Side Milling (A) and Slotting (B)			UNCOATED			Recommended feed per tooth (Fz = IPT) for side milling (A). For slotting (B), reduce Fz by 20%.
		A		B	Cutting Speed Vc SFM				D1 Diameter
		ap	ae	ap	Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	Ap1 max	0,5 x D1	1 x D	1500	1800	6000	IPT	.0009	.0017	.0022	.0026	.0035	.0043	.0052	.0060	.0069	.0078	.0087	.0108
	2	Ap1 max	0,5 x D1	1 x D	1500	1800	4500	IPT	.0008	.0016	.0019	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097
	3	Ap1 max	0,5 x D1	1 x D	1500	1800	4500	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	4	Ap1 max	0,5 x D1	1 x D	1200	1350	2250	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	5	Ap1 max	0,5 x D1	1 x D	750	1200	3000	IPT	.0008	.0016	.0020	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097

Material Group		<="" td="">		<="" td="">	<="" td="" />
		Side Milling (A) and Slotting (B)			UNCOATED			Recommended feed per tooth (Fz = IPT) for side milling (A). For slotting (B), reduce Fz by 20%.
		A		B	Cutting Speed Vc SFM				D1 Diameter
		ap	ae	ap	Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	Ap1 max	0,5 x D1	1 x D1	1500	1800	6000	IPT	.0009	.0017	.0022	.0026	.0035	.0043	.0052	.0060	.0069	.0078	.0087	.0108
	2	Ap1 max	0,5 x D1	1 x D1	1500	1800	4500	IPT	.0008	.0016	.0019	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097
	3	Ap1 max	0,5 x D1	1 x D1	1500	1800	4500	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	4	Ap1 max	0,5 x D1	1 x D1	1200	1350	2250	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	5	Ap1 max	0,5 x D1	1 x D1	750	1200	3000	IPT	.0008	.0016	.0020	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO Katalog Numarası	Kalite

Hoş Geldiniz

Lütfen tercihlerinizi onaylayın

Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

Satış Ekibimizle İletişime Geçin

Satış Ekibimizle İletişime Geçin

Editing Solution

Adding Solution

ALUFLASH • Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

ALUFLASH™ Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

Kullanım ve uygulama alanları

İş Parçası Malzemeleri

Makine Tarafı

İş Parçası Tarafı

Ürün Önerileri

Product Family suggestions

Satış Ekibimizle İletişime Geçin

Bildirimler

Satış Ekibimizle İletişime Geçin

Sending to SolidCAM in progress...

ALUFLASH • Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

ALUFLASH™ Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

Kullanım ve uygulama alanları

İş Parçası Malzemeleri

Makine Tarafı

İş Parçası Tarafı

The following files are available