Drilling
Drilling: Inclined Entry
Drilling: Inclined Exit
Drilling: X-Offset
Drilling: Flat Bottom
Drilling: Stacked Plates
Drilling: Convex
Drilling - Through Coolant
Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
Corner Style: Corner Chamfer
Corner Style: Square End
Shank - Cylindrical Plain ≤h6
Helix Angle: 30°
Tool Dimensions: 2flute/4margin/coolant
38550
38563
Drilling Depth: 3x
Chain Drilling
Drilling: Cross-Hole Drilling
Drilling: Corner Drilling 45°Downloaded file will be available after import in the {{cadTool}} tool library.
| Ürün Numarası | 6197084 |
| ISO Katalog No | TDF511A04000 |
| ANSI Catalog No | TDF511A04000 |
| Grade | WU20PD |
| [D1] Drill Diameter M | 4 mm |
| [D1] Drill Diameter M | 0.1575 in |
| [L] Overall Length | 66 mm |
| [L] Overall Length | 2.5984 in |
| [L3] Flute Length | 24 mm |
| [L3] Flute Length | 0.9449 in |
| [L4] Maximum Drilling Depth | 17 mm |
| [L4] Maximum Drilling Depth | 0.6693 in |
| [LS] Shank Length | 36 mm |
| [LS] Shank Length | 1.4173 in |
| [D] Adapter / Shank / Bore Diameter | 6 mm |
| [D] Adapter / Shank / Bore Diameter | 0.2362 in |
DrillingDrilling: Inclined EntryDrilling: Inclined ExitDrilling: X-OffsetDrilling: Flat BottomDrilling: Stacked PlatesDrilling: ConvexDrilling - Through CoolantThrough Coolant: MQL (Minimum Quantity Lubricant): DrillingCorner Style: Corner ChamferCorner Style: Square EndShank - Cylindrical Plain ≤h6Helix Angle: 30°Tool Dimensions: 2flute/4margin/coolant3855038563Drilling Depth: 3xChain DrillingDrilling: Cross-Hole DrillingDrilling: Corner Drilling 45°Kaliteler
WU20PD
Composition: With a multilayered PVD TiN-TiAlN coating, a high-quality, sub-micron, carbide substrate and a state-of-the-art surface condition, this grade gives the highest level of wear resistance at high cutting speeds.
Application: First choice for alloyed and high-alloyed steels and cast irons. A state-of-the-art surface condition enables superior chip evacuation even when MQL is applied.
İlerleme ve Devir hesaplamak için Çözüm Oluşturun
Bir çözüm oluşturduktan sonra, sadece İlerleme ve Devir simgesini seçin ve sistemimiz öneriler sunacaktır. Makinenizi ve teknik özelliklerinizi ekleyerek bilgileri özelleştirebilir veya kaydırıcıları kullanarak ayarlamalar yapabilirsiniz.
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
ISO Katalog Numarası
ANSI Katalog Numarası
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Katalog Numarası | Kalite |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?