Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

WIDIA Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Güçlü takımlama çözümleri indirimde. Şimdi satın alın.

Hızlandırılmış Alüminyum İşleme

ALUFLASH parmak freze, tezgah başındakileri, herhangi bir alüminyum uygulamasında sınırsız performansa erişmek üzere kesme hızlarının tezgah kapasitesinin üzerine çıkmaya teşvik eder.

Bu hızlandırılmış işleme, gelişmiş rampa açılarını işleme fonksiyonuyla birleştiğinde; ALUFLASH'ı hem kaba işleme hem de hassas işlemelerde, daha az çoklu geçişli işlemelerle sayısız talaş yoğunluğunu kaldırabilen bir alüminyum işleme canavarına dönüştürür.

ALUFLASH 2 veya 3 kanallı yapısallıkta mevcuttur. Esas olarak Havacılık ve Uzay endüstrisi pazar segmenti için geliştirilmiştir, ancak genel mühendislik alanında da geçerlidir.

Rekabette Üstün Performans

ALUFLASH kaba işleme ve ince talaş işleme operasyonlarında, daha az çoklu geçişli işlemelerle daha fazla talaşı kaldırarak zamandan ve paradan tasarruf etmenizi sağlar. ALUFLASH ile yaptığımız denemeleri izleyin. Denemeler, kanal frezeleme ve cep frezeleme uygulamalarını kapsar.

Ürün Özellikleri

  • 2 veya 3 kanallı
  • Kaplamasız karbür kalite
  • Rampalama/dalma yeteneklerini geliştirmek ve iş mili yükünü azaltmak için çift talaş boşluğu
  • Titreşimleri azaltmak için dengeleme özellikli tasarım
  • Titreşim sönümleme için değişken helis açısı
  • Parabolik öz sayesinde takım kararlılığı artarken, sapma ve kırılma riski azalır.

   

Şimdi GörüntüleALUFLASH 2021 Catalog Cover (EN | Inch)

ALUFLASH™
(İnç Ölçüler Broşürü)

Şimdi Görüntüle
Şimdi GörüntüleALUFLASH 2021 Catalog Cover (EN | Metric)

ALUFLASH™
(Metrik Ölçüler Broşürü)

Şimdi Görüntüle
Filtreleri Seçin
Filtreler
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • N Non-Ferrous Materials (364)
      • N1
        Wrought Aluminum (364)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(364)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(364)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (364)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (314)
    Select All Star
    • DE (18)
    • GB (5)
    • US (6)
    Applications
    Applications
    • DrillingDrilling (209)
    • Flat Bottom DrillingFlat Bottom Drilling (41)
    • PocketPocket (364)
    • Pocket HelicalPocket Helical (364)
    • Pocket MillingPocket Milling (364)
    • Pocket Plunge MillingPocket Plunge Milling (171)
    • Profile MillingProfile Milling (14)
    • RampingRamping (182)
    • Shoulder Ball NoseShoulder Ball Nose (14)
    • Shoulder MillingShoulder Milling (364)
    • Shoulder RoughingShoulder Roughing (350)
    • Shoulder Square EndShoulder Square End (350)
    • Slot Ball NoseSlot Ball Nose (14)
    • Slot MillingSlot Milling (223)
    • Slot SideSlot Side (21)
    • Slot Square EndSlot Square End (209)
    • Trochoidal MillingTrochoidal Milling (25)
    Cutting Diameter
    Cutting Diameter
    • 0.039 in(1)
    • 0.06 in(2)
    • 0.079 in(2)
    • 0.098 in(2)
    • 0.119 in(3)
    • 0.125 in(10)
    • 0.157 in(6)
    • 0.188 in(21)
    • 0.197 in(6)
    • 0.237 in(8)
    • 0.25 in(38)
    • 0.313 in(27)
    • 0.315 in(9)
    • 0.375 in(37)
    • 0.394 in(9)
    • 0.473 in(13)
    • 0.5 in(43)
    • 0.625 in(25)
    • 0.63 in(13)
    • 0.75 in(35)
    • 0.787 in(14)
    • 1.0 in(40)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 1.0 mm(1)
    • 1.5 mm(2)
    • 2.0 mm(2)
    • 2.5 mm(2)
    • 3.0 mm(3)
    • 3.176 mm(10)
    • 4.0 mm(6)
    • 4.775 mm(21)
    • 5.0 mm(6)
    • 6.0 mm(8)
    • 6.351 mm(38)
    • 7.95 mm(27)
    • 8.0 mm(9)
    • 9.525 mm(37)
    • 10.0 mm(9)
    • 12.0 mm(13)
    • 12.701 mm(43)
    • 15.875 mm(25)
    • 16.0 mm(13)
    • 19.05 mm(35)
    • 20.0 mm(14)
    • 25.401 mm(40)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 4.0 mm(1)
    • 4.775 mm(4)
    • 6.0 mm(2)
    • 6.351 mm(14)
    • 7.95 mm(23)
    • 8.0 mm(4)
    • 9.0 mm(2)
    • 9.525 mm(25)
    • 10.0 mm(3)
    • 12.0 mm(7)
    • 12.701 mm(21)
    • 13.0 mm(4)
    • 14.0 mm(2)
    • 15.0 mm(1)
    • 15.875 mm(28)
    • 16.0 mm(2)
    • 18.0 mm(7)
    • 19.05 mm(26)
    • 20.0 mm(2)
    • 20.651 mm(1)
    • 22.0 mm(6)
    • 22.225 mm(1)
    • 24.0 mm(2)
    • 25.0 mm(9)
    • 25.401 mm(30)
    • 30.0 mm(3)
    • 31.75 mm(34)
    • 32.0 mm(10)
    • 36.0 mm(4)
    • 38.1 mm(11)
    • 40.0 mm(9)
    • 41.276 mm(9)
    • 44.45 mm(3)
    • 48.0 mm(3)
    • 50.801 mm(12)
    • 57.151 mm(4)
    • 60.0 mm(5)
    • 63.5 mm(15)
    • 76.2 mm(4)
    • 82.551 mm(7)
    • 101.601 mm(4)
    Cutting Length Min-Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.157 in(1)
    • 0.188 in(4)
    • 0.237 in(2)
    • 0.25 in(14)
    • 0.313 in(23)
    • 0.315 in(4)
    • 0.354 in(2)
    • 0.375 in(25)
    • 0.394 in(3)
    • 0.473 in(7)
    • 0.5 in(21)
    • 0.512 in(4)
    • 0.551 in(2)
    • 0.591 in(1)
    • 0.625 in(28)
    • 0.63 in(2)
    • 0.709 in(7)
    • 0.75 in(26)
    • 0.787 in(2)
    • 0.814 in(1)
    • 0.866 in(6)
    • 0.875 in(1)
    • 0.946 in(2)
    • 0.984 in(9)
    • 1.0 in(30)
    • 1.181 in(3)
    • 1.25 in(34)
    • 1.26 in(10)
    • 1.417 in(4)
    • 1.5 in(11)
    • 1.575 in(9)
    • 1.625 in(9)
    • 1.75 in(3)
    • 1.891 in(3)
    • 2.0 in(12)
    • 2.25 in(4)
    • 2.362 in(5)
    • 2.5 in(15)
    • 3.0 in(4)
    • 3.25 in(7)
    • 4.0 in(4)
    Cutting Length Min-Cutting Length Max
    Reach
    Reach
    • 0.25 in(1)
    • 0.313 in(1)
    • 0.375 in(3)
    • 0.473 in(2)
    • 0.5 in(1)
    • 0.564 in(4)
    • 0.591 in(3)
    • 0.625 in(4)
    • 0.63 in(1)
    • 0.709 in(4)
    • 0.75 in(10)
    • 0.787 in(1)
    • 0.814 in(1)
    • 0.875 in(1)
    • 0.946 in(7)
    • 1.0 in(17)
    • 1.181 in(5)
    • 1.25 in(20)
    • 1.26 in(2)
    • 1.417 in(7)
    • 1.5 in(19)
    • 1.575 in(3)
    • 1.891 in(12)
    • 2.0 in(19)
    • 2.25 in(6)
    • 2.362 in(7)
    • 2.5 in(18)
    • 2.52 in(3)
    • 3.0 in(12)
    • 3.15 in(5)
    • 3.25 in(6)
    • 3.5 in(6)
    • 3.75 in(6)
    Reach Min-Reach Max
    Reach
    Reach
    • 6.351 mm(1)
    • 7.95 mm(1)
    • 9.525 mm(3)
    • 12.0 mm(2)
    • 12.701 mm(1)
    • 14.3 mm(4)
    • 15.0 mm(3)
    • 15.875 mm(4)
    • 16.0 mm(1)
    • 18.0 mm(4)
    • 19.05 mm(10)
    • 20.0 mm(1)
    • 20.651 mm(1)
    • 22.225 mm(1)
    • 24.0 mm(7)
    • 25.401 mm(17)
    • 30.0 mm(5)
    • 31.75 mm(20)
    • 32.0 mm(2)
    • 36.0 mm(7)
    • 38.1 mm(19)
    • 40.0 mm(3)
    • 48.0 mm(12)
    • 50.801 mm(19)
    • 57.151 mm(6)
    • 60.0 mm(7)
    • 63.5 mm(18)
    • 64.0 mm(3)
    • 76.2 mm(12)
    • 80.0 mm(5)
    • 82.551 mm(6)
    • 88.9 mm(6)
    • 95.25 mm(6)
    Reach Min-Reach Max
    Number of Flutes
    Number of Flutes
    • 2 (149)
    • 3 (215)
    Over All Length [L]
    Over All Length [L]
    • 1.496 in(10)
    • 1.5 in(2)
    • 1.969 in(8)
    • 2.0 in(25)
    • 2.25 in(11)
    • 2.48 in(12)
    • 2.5 in(33)
    • 2.992 in(24)
    • 3.0 in(43)
    • 3.25 in(5)
    • 3.5 in(25)
    • 3.504 in(13)
    • 3.938 in(4)
    • 4.0 in(36)
    • 4.094 in(2)
    • 4.25 in(4)
    • 4.331 in(3)
    • 4.5 in(10)
    • 4.529 in(7)
    • 5.0 in(32)
    • 5.5 in(33)
    • 5.906 in(5)
    • 6.5 in(13)
    • 7.0 in(4)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.0 mm(10)
    • 38.1 mm(2)
    • 50.0 mm(8)
    • 50.801 mm(25)
    • 57.151 mm(11)
    • 63.0 mm(12)
    • 63.5 mm(33)
    • 76.0 mm(24)
    • 76.2 mm(43)
    • 82.551 mm(5)
    • 88.9 mm(25)
    • 89.0 mm(13)
    • 100.0 mm(4)
    • 101.601 mm(36)
    • 104.0 mm(2)
    • 107.95 mm(4)
    • 110.0 mm(3)
    • 114.301 mm(10)
    • 115.0 mm(7)
    • 127.0 mm(32)
    • 139.701 mm(33)
    • 150.0 mm(5)
    • 165.101 mm(13)
    • 177.8 mm(4)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • BALL NOSE (14)
    • RADIUS (245)
    • SQUARE END (105)
    Corner Radius
    Corner Radius
    • 0.0 in(105)
    • 0.008 in(17)
    • 0.015 in(30)
    • 0.02 in(15)
    • 0.03 in(66)
    • 0.039 in(11)
    • 0.06 in(70)
    • 0.063 in(2)
    • 0.079 in(4)
    • 0.09 in(2)
    • 0.094 in(2)
    • 0.098 in(1)
    • 0.119 in(6)
    • 0.12 in(14)
    • 0.125 in(3)
    • 0.156 in(1)
    • 0.157 in(3)
    • 0.188 in(2)
    • 0.19 in(3)
    • 0.197 in(1)
    • 0.25 in(6)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(105)
    • 0.2 mm(17)
    • 0.375 mm(30)
    • 0.5 mm(15)
    • 0.75 mm(66)
    • 1.0 mm(11)
    • 1.5 mm(9)
    • 1.526 mm(61)
    • 1.6 mm(2)
    • 2.0 mm(4)
    • 2.275 mm(2)
    • 2.375 mm(2)
    • 2.5 mm(1)
    • 3.0 mm(6)
    • 3.051 mm(14)
    • 3.176 mm(3)
    • 3.975 mm(1)
    • 4.0 mm(3)
    • 4.775 mm(2)
    • 4.825 mm(3)
    • 5.0 mm(1)
    • 6.351 mm(6)
    Corner Radius Min-Corner Radius Max
    application
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 45.0 (350)
    Maximum Ramp Angle Min-Maximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.117 in(4)
    • 0.148 in(3)
    • 0.176 in(11)
    • 0.185 in(4)
    • 0.222 in(6)
    • 0.236 in(18)
    • 0.293 in(18)
    • 0.296 in(7)
    • 0.352 in(18)
    • 0.37 in(8)
    • 0.444 in(11)
    • 0.472 in(18)
    • 0.588 in(18)
    • 0.593 in(11)
    • 0.705 in(18)
    • 0.74 in(12)
    • 0.941 in(18)
    Neck Diameter Min-Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 2.975 mm(4)
    • 3.75 mm(3)
    • 4.476 mm(11)
    • 4.7 mm(4)
    • 5.65 mm(6)
    • 5.976 mm(18)
    • 7.45 mm(18)
    • 7.525 mm(7)
    • 8.951 mm(18)
    • 9.4 mm(8)
    • 11.275 mm(11)
    • 11.951 mm(18)
    • 14.925 mm(18)
    • 15.05 mm(11)
    • 17.901 mm(18)
    • 18.8 mm(12)
    • 23.875 mm(18)
    Neck Diameter Min-Neck Diameter Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 3.0 mm(10)
    • 3.176 mm(10)
    • 4.0 mm(6)
    • 4.775 mm(21)
    • 5.0 mm(6)
    • 6.0 mm(8)
    • 6.351 mm(38)
    • 7.95 mm(27)
    • 8.0 mm(9)
    • 9.525 mm(37)
    • 10.0 mm(9)
    • 12.0 mm(13)
    • 12.701 mm(43)
    • 15.875 mm(25)
    • 16.0 mm(13)
    • 19.05 mm(35)
    • 20.0 mm(14)
    • 25.401 mm(40)
    Back-End Diameter Min-Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.119 in(10)
    • 0.125 in(10)
    • 0.157 in(6)
    • 0.188 in(21)
    • 0.197 in(6)
    • 0.237 in(8)
    • 0.25 in(38)
    • 0.313 in(27)
    • 0.315 in(9)
    • 0.375 in(37)
    • 0.394 in(9)
    • 0.473 in(13)
    • 0.5 in(43)
    • 0.625 in(25)
    • 0.63 in(13)
    • 0.75 in(35)
    • 0.787 in(14)
    • 1.0 in(40)
    Back-End Diameter Min-Back-End Diameter Max
    No filters matching ""
    ALUFLASH • Series 3A09 • Square End • 3 Flute • Regular Length • Cylindrical Shank • Inch
    (8)

    ALUFLASH • Series 3A09 • Square End • 3 Flute • Regular Length • Cylindrical Shank • Inch

    ALUFLASH • 3AN9 Serisi • Radyüs • 3 Kanal • Standart boy • Standart boyun • Silindirik şaft • Metrik
    (33)

    ALUFLASH • 3AN9 Serisi • Radyüs • 3 Kanal • Standart boy • Standart boyun • Silindirik şaft • Metrik

    ALUFLASH • Series 3A19 • Square End • 3 Flute • Medium Length • Cylindrical Shank • Inch
    (7)

    ALUFLASH • Series 3A19 • Square End • 3 Flute • Medium Length • Cylindrical Shank • Inch

    ALUFLASH • 3AN9 Serisi • Dik kenar uç • 3 Kanal • Standart boy • Silindirik şaft • Metrik
    (8)

    ALUFLASH • 3AN9 Serisi • Dik kenar uç • 3 Kanal • Standart boy • Silindirik şaft • Metrik

    ALUFLASH• 2A09 Serisi • Dik kenar uç • 2 Kanal • Standart boy • Silindirik şaft • Metrik
    (11)

    ALUFLASH• 2A09 Serisi • Dik kenar uç • 2 Kanal • Standart boy • Silindirik şaft • Metrik

    ALUFLASH • Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch
    (23)

    ALUFLASH • Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

    ALUFLASH• 3A09 Serisi • Dik kenar uç • 3 Kanal • Standart boy • Silindirik şaft • Metrik
    (1)

    ALUFLASH• 3A09 Serisi • Dik kenar uç • 3 Kanal • Standart boy • Silindirik şaft • Metrik

    Series 4A01 - 4A41 • Ball Nose • 2 Flutes • Cylindrical Shank • Inch
    (14)

    Series 4A01 - 4A41 • Ball Nose • 2 Flutes • Cylindrical Shank • Inch

    ALUFLASH • Series 2A09 • Radius • 2 Flute • Regular Length • Cylindrical Shank • Inch
    (17)

    ALUFLASH • Series 2A09 • Radius • 2 Flute • Regular Length • Cylindrical Shank • Inch

    ALUFLASH • Series 2A09 • Square End • 2 Flute • Regular Length • Cylindrical Shank • Inch
    (8)

    ALUFLASH • Series 2A09 • Square End • 2 Flute • Regular Length • Cylindrical Shank • Inch

    ALUFLASH • Series 2A19 • Radius • 2 Flute • Long Length • Cylindrical Shank • Inch
    (9)

    ALUFLASH • Series 2A19 • Radius • 2 Flute • Long Length • Cylindrical Shank • Inch

    ALUFLASH • 3A09 Serisi • Radyüs • 3 Kanal • Standart boy • Silindirik şaft • Metrik
    (2)

    ALUFLASH • 3A09 Serisi • Radyüs • 3 Kanal • Standart boy • Silindirik şaft • Metrik

    ALUFLASH • Series 3AN9 • Square End • 3 Flute • Regular Length • Regular Neck • Cylindrical Shank • Inch
    (8)

    ALUFLASH • Series 3AN9 • Square End • 3 Flute • Regular Length • Regular Neck • Cylindrical Shank • Inch

    ALUFLASH • Series 3AN9 • Radius • 3 Flute • Regular Length • Regular Neck • Cylindrical Shank • Inch
    (15)

    ALUFLASH • Series 3AN9 • Radius • 3 Flute • Regular Length • Regular Neck • Cylindrical Shank • Inch

    ALUFLASH • Series 3A29 • Square End • 3 Flute • Long Length • Cylindrical Shank • Inch
    (6)

    ALUFLASH • Series 3A29 • Square End • 3 Flute • Long Length • Cylindrical Shank • Inch

    ALUFLASH • Series 2AN9 • Square End • 2 Flute • Regular Length • Regular Neck • Cylindrical Shank • Inch
    (9)

    ALUFLASH • Series 2AN9 • Square End • 2 Flute • Regular Length • Regular Neck • Cylindrical Shank • Inch

    Where To Buy

    Find an authorized WIDIA distributor near you.

    Search Near Me

    Where To Buy

    Find an authorized WIDIA distributor near you.

    Search Near Me
    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Lütfen geçerli bir ad girin
    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi
    Sepeti Görüntüle

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Katalog Numarası Kalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk