Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

WIDIA Hizmetinizde

Ürüne Özel Bir Sorunuz mu Var?

Uzmanlık Alanına göre Global Hizmet Profesyonellerinin tam listesine bakın

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Back to Solution

Editing Solution

Adding Solution

Solution Name: {{SolutionName}}

H/P Komple karbür • Hassas son işleme

Filtreleri Seçin
Filters
Filtreler
Filtreler
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (295)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (295)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (295)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (295)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (276)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (211)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (174)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (174)
  • M Stainless Steel (293)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (293)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (211)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (174)
  • K Cast Iron (293)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (293)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (211)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (174)
  • N Non-Ferrous Materials (37)
    • N1
      Wrought Aluminum
      (37)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (37)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (27)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (27)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (37)
    • N6
      Carbon, Graphite Composites, CFRP
      (37)
  • S High-Temp Alloys (174)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (174)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (174)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (174)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (174)
  • H Hardened Materials (178)
    • H1
      Hardened Materials 44-48 HRC
      (178)
    • H2
      Hardened Materials 48-55 HRC
      (13)
Select All Star
  • CN (9)
  • DE (18)
  • GB (11)
  • SG (6)
  • US (32)
Applications
Applications
  • Pocket Pocket (221)
  • Pocket Helical Pocket Helical (242)
  • Pocket Milling Pocket Milling (234)
  • Pocket Plunge Milling Pocket Plunge Milling (13)
  • Profile Milling Profile Milling (24)
  • Ramping Ramping (215)
  • Shoulder Ball Nose Shoulder Ball Nose (37)
  • Shoulder Milling Shoulder Milling (274)
  • Shoulder Roughing Shoulder Roughing (29)
  • Shoulder Square End Shoulder Square End (261)
  • Slot Ball Nose Slot Ball Nose (37)
  • Slot Milling Slot Milling (205)
  • Slot Square End Slot Square End (184)
Cutting Diameter
Cutting Diameter
  • 0.039 in (3)
  • 0.06 in (3)
  • 0.079 in (8)
  • 0.098 in (3)
  • 0.119 in (17)
  • 0.125 in (8)
  • 0.138 in (2)
  • 0.157 in (20)
  • 0.177 in (1)
  • 0.188 in (10)
  • 0.197 in (17)
  • 0.237 in (27)
  • 0.25 in (30)
  • 0.276 in (3)
  • 0.313 in (23)
  • 0.315 in (28)
  • 0.354 in (1)
  • 0.375 in (30)
  • 0.394 in (25)
  • 0.438 in (10)
  • 0.473 in (27)
  • 0.5 in (46)
  • 0.551 in (22)
  • 0.625 in (37)
  • 0.63 in (25)
  • 0.709 in (18)
  • 0.75 in (42)
  • 0.787 in (24)
  • 0.984 in (1)
  • 1.0 in (29)
Cutting Diameter Min - Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 1.0 mm (3)
  • 1.5 mm (3)
  • 2.0 mm (8)
  • 2.5 mm (3)
  • 3.0 mm (17)
  • 3.176 mm (8)
  • 3.5 mm (2)
  • 4.0 mm (20)
  • 4.5 mm (1)
  • 4.775 mm (10)
  • 5.0 mm (17)
  • 6.0 mm (27)
  • 6.351 mm (30)
  • 7.0 mm (3)
  • 7.95 mm (23)
  • 8.0 mm (28)
  • 9.0 mm (1)
  • 9.525 mm (30)
  • 10.0 mm (25)
  • 11.125 mm (10)
  • 12.0 mm (27)
  • 12.701 mm (46)
  • 14.0 mm (22)
  • 15.875 mm (37)
  • 16.0 mm (25)
  • 18.0 mm (18)
  • 19.05 mm (42)
  • 20.0 mm (24)
  • 25.0 mm (1)
  • 25.401 mm (29)
Cutting Diameter Min - Cutting Diameter Max
Cutting Length
Cutting Length
  • 3.0 mm (14)
  • 4.0 mm (9)
  • 5.0 mm (9)
  • 6.0 mm (7)
  • 6.351 mm (2)
  • 7.0 mm (13)
  • 7.95 mm (2)
  • 8.0 mm (9)
  • 9.0 mm (8)
  • 9.5 mm (3)
  • 9.525 mm (4)
  • 10.0 mm (12)
  • 11.0 mm (10)
  • 11.125 mm (5)
  • 12.0 mm (17)
  • 12.701 mm (20)
  • 13.0 mm (10)
  • 14.0 mm (15)
  • 14.3 mm (2)
  • 15.875 mm (17)
  • 16.0 mm (18)
  • 18.0 mm (9)
  • 19.0 mm (12)
  • 19.05 mm (23)
  • 20.0 mm (10)
  • 20.651 mm (11)
  • 22.0 mm (22)
  • 22.225 mm (23)
  • 24.0 mm (4)
  • 25.0 mm (4)
  • 25.401 mm (22)
  • 26.0 mm (24)
  • 28.576 mm (9)
  • 31.75 mm (30)
  • 32.0 mm (22)
  • 38.0 mm (13)
  • 38.1 mm (34)
  • 45.0 mm (1)
  • 50.801 mm (13)
  • 57.151 mm (31)
  • 76.2 mm (11)
  • 101.601 mm (6)
Cutting Length Min - Cutting Length Max
Cutting Length
Cutting Length
  • 0.119 in (14)
  • 0.157 in (9)
  • 0.197 in (9)
  • 0.237 in (7)
  • 0.25 in (2)
  • 0.276 in (13)
  • 0.313 in (2)
  • 0.315 in (9)
  • 0.354 in (8)
  • 0.374 in (3)
  • 0.375 in (4)
  • 0.394 in (12)
  • 0.433 in (10)
  • 0.438 in (5)
  • 0.473 in (17)
  • 0.5 in (20)
  • 0.512 in (10)
  • 0.551 in (15)
  • 0.564 in (2)
  • 0.625 in (17)
  • 0.63 in (18)
  • 0.709 in (9)
  • 0.748 in (12)
  • 0.75 in (23)
  • 0.787 in (10)
  • 0.814 in (11)
  • 0.866 in (22)
  • 0.875 in (23)
  • 0.946 in (4)
  • 0.984 in (4)
  • 1.0 in (22)
  • 1.024 in (24)
  • 1.125 in (9)
  • 1.25 in (30)
  • 1.26 in (22)
  • 1.496 in (13)
  • 1.5 in (34)
  • 1.772 in (1)
  • 2.0 in (13)
  • 2.25 in (31)
  • 3.0 in (11)
  • 4.0 in (6)
Cutting Length Min - Cutting Length Max
Reach
Reach
  • 0.119 in (12)
  • 0.157 in (5)
  • 0.197 in (5)
  • 0.237 in (4)
  • 0.276 in (6)
  • 0.313 in (2)
  • 0.315 in (4)
  • 0.354 in (4)
  • 0.374 in (3)
  • 0.375 in (4)
  • 0.394 in (8)
  • 0.433 in (6)
  • 0.438 in (5)
  • 0.473 in (12)
  • 0.5 in (19)
  • 0.512 in (9)
  • 0.551 in (10)
  • 0.564 in (2)
  • 0.625 in (16)
  • 0.63 in (10)
  • 0.709 in (3)
  • 0.748 in (9)
  • 0.75 in (20)
  • 0.787 in (3)
  • 0.814 in (11)
  • 0.866 in (15)
  • 0.875 in (21)
  • 0.946 in (4)
  • 0.984 in (1)
  • 1.0 in (18)
  • 1.024 in (20)
  • 1.125 in (9)
  • 1.25 in (27)
  • 1.26 in (12)
  • 1.379 in (3)
  • 1.496 in (6)
  • 1.5 in (28)
  • 1.575 in (6)
  • 1.772 in (1)
  • 1.969 in (3)
  • 2.0 in (10)
  • 2.244 in (3)
  • 2.25 in (24)
  • 2.362 in (6)
  • 3.0 in (11)
  • 4.0 in (6)
Reach Min - Reach Max
Reach
Reach
  • 3.0 mm (12)
  • 4.0 mm (5)
  • 5.0 mm (5)
  • 6.0 mm (4)
  • 7.0 mm (6)
  • 7.95 mm (2)
  • 8.0 mm (4)
  • 9.0 mm (4)
  • 9.5 mm (3)
  • 9.525 mm (4)
  • 10.0 mm (8)
  • 11.0 mm (6)
  • 11.125 mm (5)
  • 12.0 mm (12)
  • 12.701 mm (19)
  • 13.0 mm (9)
  • 14.0 mm (10)
  • 14.3 mm (2)
  • 15.875 mm (16)
  • 16.0 mm (10)
  • 18.0 mm (3)
  • 19.0 mm (9)
  • 19.05 mm (20)
  • 20.0 mm (3)
  • 20.651 mm (11)
  • 22.0 mm (15)
  • 22.225 mm (21)
  • 24.0 mm (4)
  • 25.0 mm (1)
  • 25.401 mm (18)
  • 26.0 mm (20)
  • 28.576 mm (9)
  • 31.75 mm (27)
  • 32.0 mm (12)
  • 35.0 mm (3)
  • 38.0 mm (6)
  • 38.1 mm (28)
  • 40.0 mm (6)
  • 45.0 mm (1)
  • 50.0 mm (3)
  • 50.801 mm (10)
  • 57.0 mm (3)
  • 57.151 mm (24)
  • 60.0 mm (6)
  • 76.2 mm (11)
  • 101.601 mm (6)
Reach Min - Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (417)
Tool Cutting Edge Angle Min - Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Straight-Cylindrical (342)
  • Weldon (198)
Number of Flutes
Number of Flutes
  • 10 (6)
  • 2 (37)
  • 3 (204)
  • 4 (5)
  • 5 (85)
  • 6 (176)
  • 8 (27)
cornerConfiguration
Corner Style
Corner Style
  • BALL NOSE (37)
  • CHAMFER (8)
  • RADIUS (60)
  • SQUARE END (331)
Corner Radius
Corner Radius
  • 0.0 in (416)
  • 0.01 in (16)
  • 0.019 in (47)
  • 0.02 in (2)
  • 0.03 in (26)
  • 0.039 in (2)
  • 0.06 in (3)
  • 0.079 in (3)
  • 0.098 in (2)
  • 0.119 in (3)
  • 0.157 in (3)
  • 0.197 in (3)
  • 0.237 in (3)
  • 0.276 in (3)
  • 0.315 in (3)
  • 0.354 in (3)
  • 0.394 in (2)
Corner Radius Min - Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (416)
  • 0.25 mm (16)
  • 0.45 mm (47)
  • 0.5 mm (2)
  • 0.75 mm (26)
  • 1.0 mm (2)
  • 1.5 mm (3)
  • 2.0 mm (3)
  • 2.5 mm (2)
  • 3.0 mm (3)
  • 4.0 mm (3)
  • 5.0 mm (3)
  • 6.0 mm (3)
  • 7.0 mm (3)
  • 8.0 mm (3)
  • 9.0 mm (3)
  • 10.0 mm (2)
Corner Radius Min - Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (532)
  • 0.1 mm (5)
  • 0.2 mm (1)
  • 0.301 mm (2)
Corner Chamfer Min - Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (532)
  • 0.004 in (5)
  • 0.008 in (1)
  • 0.012 in (2)
Corner Chamfer Min - Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TIALN (36)
  • TIALN-LW (11)
  • TIALN-RJ (14)
  • TIALN-RT (59)
  • TIALN-RW (22)
  • TICN-CT (70)
  • TICN-CW (39)
  • UNCOATED (98)
  • UNCOATEDJJ (4)
  • UNCOATEDWW (18)
  • WP15PE (99)
Rough Finish
Rough Finish
  • F (511)
  • FR (29)
frontEnd
Neck Diameter
Neck Diameter
  • 0.217 in (2)
  • 0.222 in (1)
  • 0.295 in (2)
  • 0.296 in (1)
  • 0.37 in (1)
  • 0.374 in (2)
  • 0.444 in (1)
  • 0.453 in (2)
  • 0.518 in (1)
  • 0.531 in (2)
  • 0.593 in (1)
  • 0.61 in (2)
  • 0.666 in (1)
  • 0.768 in (2)
Neck Diameter Min - Neck Diameter Max
Neck Diameter
Neck Diameter
  • 5.5 mm (2)
  • 5.65 mm (1)
  • 7.5 mm (2)
  • 7.525 mm (1)
  • 9.4 mm (1)
  • 9.5 mm (2)
  • 11.275 mm (1)
  • 11.5 mm (2)
  • 13.15 mm (1)
  • 13.5 mm (2)
  • 15.05 mm (1)
  • 15.5 mm (2)
  • 16.925 mm (1)
  • 19.5 mm (2)
Neck Diameter Min - Neck Diameter Max
Center Cutting
Center Cutting
backEnd
Back-End Diameter
Back-End Diameter
  • 3.176 mm (8)
  • 4.0 mm (11)
  • 4.775 mm (10)
  • 6.0 mm (90)
  • 6.351 mm (30)
  • 7.95 mm (23)
  • 8.0 mm (31)
  • 9.525 mm (30)
  • 10.0 mm (26)
  • 11.125 mm (10)
  • 12.0 mm (27)
  • 12.701 mm (46)
  • 14.0 mm (22)
  • 15.875 mm (37)
  • 16.0 mm (27)
  • 18.0 mm (16)
  • 19.05 mm (42)
  • 20.0 mm (24)
  • 25.0 mm (1)
  • 25.401 mm (29)
Back-End Diameter Min - Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.125 in (8)
  • 0.157 in (11)
  • 0.188 in (10)
  • 0.237 in (90)
  • 0.25 in (30)
  • 0.313 in (23)
  • 0.315 in (31)
  • 0.375 in (30)
  • 0.394 in (26)
  • 0.438 in (10)
  • 0.473 in (27)
  • 0.5 in (46)
  • 0.551 in (22)
  • 0.625 in (37)
  • 0.63 in (27)
  • 0.709 in (16)
  • 0.75 in (42)
  • 0.787 in (24)
  • 0.984 in (1)
  • 1.0 in (29)
Back-End Diameter Min - Back-End Diameter Max
No filters matching ""
Ürünleri şurada görüntüleyin:
Metrik
İnç

ORİJİNAL ÜRÜN

Hassas son işleme özellikli frezeler • D503 D513 Serisi • Dik kenar uç • Metrik Hassas son işleme özellikli frezeler • D503 D513 Serisi • Dik kenar uç • Metrik

D503 D513 Serisi • Metrik
(83 Products)
  • 3857138571
  • Helix Angle: 45°Helix Angle: 45°
  • Corner Style: Square EndCorner Style: Square End
  • 3855138551
  • Slotting: Square EndSlotting: Square End
  • Ramping: BlankRamping: Blank
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Shank - Cylindrical WeldonShank - Cylindrical Weldon
Ürünleri görüntüle
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Z] Number of Flutes
1661573 D50302002CW D50302002CW TICN-CW   Weldon 2.0000 .0790 6.0 .2362 3.0000 .1180 50.0000 1.969 3
    Bu ürün mevcut değil
    Bu ürün bir distribütör üzerinden temin edilebilir
    Fiyatınız::
    1661576 D50302002WW D50302002WW UNCOATEDWW   Weldon 2.0000 .0790 6.0 .2362 3.0000 .1180 50.0000 1.969 3
      Bu ürün mevcut değil
      Bu ürün bir distribütör üzerinden temin edilebilir
      Fiyatınız::
      1661577 D50303002CW D50303002CW TICN-CW   Weldon 3.0000 .1180 6.0 .2362 4.0000 .1570 50.0000 1.969 3
        Liste fiyatı:
        $56.86 /her biri
        Fiyatınız::
        1661580 D50303002WW D50303002WW UNCOATED   Weldon 3.0000 .1180 6.0 .2362 4.0000 .1570 50.0000 1.969 3
          Liste fiyatı:
          $42.18 /her biri
          Fiyatınız::
          1661582 D50304002CW D50304002CW TICN-CW   Weldon 4.0000 .1570 6.0 .2362 5.0000 .1970 54.0000 2.126 3
            Liste fiyatı:
            $52.34 /her biri
            Fiyatınız::
            1661680 D51303002RW D513030S2W TIALN   Weldon 3.0000 .1180 6.0 .2362 7.0000 .2760 57.0000 2.244 3
              Liste fiyatı:
              $49.16 /her biri
              Fiyatınız::