Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

WIDIA Hizmetinizde

Ürüne Özel Bir Sorunuz mu Var?

Uzmanlık Alanına göre Global Hizmet Profesyonellerinin tam listesine bakın

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Back to Solution

Editing Solution

Adding Solution

Solution Name: {{SolutionName}}

D-Bağlama

Filtreleri Seçin
Filters
Filtreler
Filtreler
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (7)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (7)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (7)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (7)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (7)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (7)
  • M Stainless Steel (7)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (7)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (7)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (7)
  • K Cast Iron (7)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (7)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (7)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (7)
  • N Non-Ferrous Materials (7)
    • N1
      Wrought Aluminum
      (7)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (7)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (3)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (7)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (7)
    • N6
      Carbon, Graphite Composites, CFRP
      (5)
    • N7
      MMC's
      (7)
  • S High-Temp Alloys (7)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (7)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (7)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (7)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (7)
  • H Hardened Materials (5)
    • H1
      Hardened Materials 44-48 HRC
      (5)
    • H2
      Hardened Materials 48-55 HRC
      (5)
    • H3
      Hardened Materials 56-60 HRC
      (5)
    • H4
      Hardened Materials >60 HRC
      (5)
Applications
Applications
  • Facing Facing (7)
  • ID Facing ID Facing (7)
  • Multiple Direction Cutting Multiple Direction Cutting (7)
  • TRN Boring TRN Boring (7)
  • Turning Turning (7)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (7)
  • Interrupted (5)
  • Lightly Interrupted Cut (7)
  • Smooth Cut (7)
  • Varying Depth of Cut (7)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 93.0 (4)
  • 95.0 (3)
Tool Cutting Edge Angle Min - Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (5)
  • 2.0 (6)
  • 3.0 (1)
  • 4.0 (6)
  • 6.0 (1)
  • 8.0 (2)
Cutting Edges Per Insert Min - Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (7)
  • 0.008 in (5)
  • 0.014 in (2)
  • 0.016 in (7)
  • 0.024 in (1)
  • 0.031 in (7)
  • 0.047 in (7)
  • 0.062 in (2)
  • 0.063 in (5)
Corner Radius Min - Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (7)
  • 0.2 mm (5)
  • 0.351 mm (2)
  • 0.4 mm (7)
  • 0.601 mm (1)
  • 0.8 mm (7)
  • 1.201 mm (7)
  • 1.576 mm (2)
  • 1.6 mm (5)
Corner Radius Min - Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (4)
  • 241 (2)
  • CL4 (4)
  • CM2 (4)
  • CM3 (4)
  • CM4 (2)
  • CPX (4)
  • CW2 (4)
  • CW2015 (4)
  • CW5025 (5)
  • GX (2)
  • HK1500 (5)
  • HT2 (6)
  • HTX (2)
  • K060 (2)
  • K090 (4)
  • K1 (2)
  • K10M (5)
  • K10P (5)
  • K10U (5)
  • K15U (5)
  • K20K (5)
  • K21 (2)
  • K25M (7)
  • K25P (5)
  • K313 (7)
  • K35P (3)
  • K420 (2)
  • K45 (2)
  • K68 (4)
  • KB1340 (4)
  • KB1345 (2)
  • KB1610 (3)
  • KB1625 (2)
  • KB1630 (2)
  • KB5610 (3)
  • KB5625 (2)
  • KB5630 (2)
  • KB9610 (5)
  • KB9640 (5)
  • KBH10 (5)
  • KBH10B (4)
  • KBH20 (5)
  • KBH20B (4)
  • KBK35 (2)
  • KC210 (4)
  • KC250 (2)
  • KC5010 (7)
  • KC5025 (7)
  • KC5410 (5)
  • KC5510 (7)
  • KC5525 (7)
  • KC710 (2)
  • KC720 (3)
  • KC722 (2)
  • KC730 (5)
  • KC7310 (7)
  • KC732 (3)
  • KC8050 (7)
  • KC810 (7)
  • KC850 (7)
  • KC9010 (7)
  • KC9025 (7)
  • KC910 (5)
  • KC9105 (7)
  • KC9110 (7)
  • KC9120 (7)
  • KC9125 (7)
  • KC9140 (7)
  • KC9145 (5)
  • KC9210 (2)
  • KC9215 (7)
  • KC9225 (7)
  • KC9240 (7)
  • KC9240NEW (7)
  • KC9245 (7)
  • KC9315 (7)
  • KC9320 (7)
  • KC9325 (7)
  • KC935 (7)
  • KC950 (5)
  • KC990 (7)
  • KCK05 (7)
  • KCK05B (7)
  • KCK15 (7)
  • KCK15B (7)
  • KCK20 (7)
  • KCK20B (7)
  • KCM15 (7)
  • KCM15B (7)
  • KCM25 (7)
  • KCM25B (7)
  • KCM35 (5)
  • KCM35B (5)
  • KCP05 (7)
  • KCP05B (7)
  • KCP10 (7)
  • KCP10B (7)
  • KCP25 (7)
  • KCP25B (7)
  • KCP25C (7)
  • KCP30 (7)
  • KCP30B (5)
  • KCP40 (5)
  • KCP40B (5)
  • KCPK05 (7)
  • KCS10 (2)
  • KCS10B (7)
  • KCU10 (7)
  • KCU10B (7)
  • KCU25 (7)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD120 (2)
  • KD1400 (3)
  • KD1405 (2)
  • KD1425 (3)
  • KM1 (2)
  • KMF (2)
  • KS15 (2)
  • KT1120 (2)
  • KT125 (4)
  • KT150 (2)
  • KT175 (4)
  • KT315 (7)
  • KT325 (6)
  • KU10T (7)
  • KU30T (7)
  • KY1310 (3)
  • KY1320 (5)
  • KY1540 (2)
  • KY1615 (4)
  • KY2000 (2)
  • KY2100 (2)
  • KY3000 (4)
  • KY3400 (3)
  • KY3500 (5)
  • KY4000 (2)
  • KY4300 (2)
  • KY4400 (5)
  • KYHK15B (5)
  • KYK10 (3)
  • KYK25 (3)
  • KYK35 (5)
  • KYS25 (2)
  • KYS30 (3)
  • NL200 (4)
  • NL250 (7)
  • NL300 (4)
  • NL400 (3)
  • NL920 (7)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (6)
  • SP0819 (5)
  • SP3019 (3)
  • SP4019 (3)
  • THM (2)
  • THM-X (4)
  • THMF-X (2)
  • TN10P (7)
  • TN10U (5)
  • TN15M (5)
  • TN15U (5)
  • TN2000 (5)
  • TN20K (5)
  • TN20P (7)
  • TN30M (7)
  • TN30P (5)
  • TN4000 (5)
  • TN5015 (7)
  • TN5020 (7)
  • TN5105 (7)
  • TN5120 (7)
  • TN6010 (4)
  • TN6025 (5)
  • TN7005 (7)
  • TN7010 (7)
  • TN7015 (7)
  • TN7025 (7)
  • TN7035 (5)
  • TN7105 (7)
  • TN7110 (7)
  • TN7115 (7)
  • TN7125 (7)
  • TN7135 (5)
  • TN8025 (7)
  • TTI15 (6)
  • TTR (2)
  • TTS (4)
  • TTX (4)
  • WBH10C (5)
  • WBH10P (2)
  • WBH10U (3)
  • WBH20P (5)
  • WBH25P (2)
  • WBH25U (4)
  • WBH30P (2)
  • WBK40U (4)
  • WBK45U (4)
  • WDN00U (2)
  • WDN25U (3)
  • WK05CT (7)
  • WK15CT (5)
  • WK20CT (7)
  • WM15CT (7)
  • WM25CT (7)
  • WM35CT (7)
  • WP05CT (3)
  • WP15CT (7)
  • WP20TT (2)
  • WP25CT (7)
  • WP35CT (7)
  • WS10PT (7)
  • WS25PT (7)
  • WU10HT (7)
  • WU10PT (7)
  • WU25PT (7)
  • X00511 (2)
  • X00580 (2)
  • X00581 (2)
  • X00582 (2)
  • X00583 (2)
  • X00584 (2)
  • X00585 (2)
  • X00586 (2)
  • X00591 (2)
  • X00592 (2)
  • X00593 (2)
  • X00594 (2)
  • X00596 (2)
  • X00597 (2)
  • X00599 (2)
Hand Of Tool
Hand Of Tool
  • L (4)
  • R (3)
Wiper Insert
Wiper Insert
  • N (7)
  • Y (7)
F Dimension
F Dimension
  • 17.0 mm (5)
  • 27.0 mm (2)
F Dimension Min - F Dimension Max
F Dimension
F Dimension
  • 0.669 in (5)
  • 1.063 in (2)
F Dimension Min - F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 32.0 mm (4)
  • 33.0 mm (1)
  • 50.0 mm (2)
Minimum Axial Groove Diameter Min - Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.26 in (4)
  • 1.299 in (1)
  • 1.969 in (2)
Minimum Axial Groove Diameter Min - Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (3)
  • E (4)
Maximum Bore Depth
Maximum Bore Depth
  • 2.598 in (5)
  • 4.646 in (2)
Maximum Bore Depth Min - Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 66.0 mm (5)
  • 118.0 mm (2)
Maximum Bore Depth Min - Maximum Bore Depth Max
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (2)
  • D-DIAMOND/RHOMBIC 55 (4)
  • W-TRIGON 80 (1)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (7)
  • B L (5)
  • C A (5)
  • C N (5)
  • D P (5)
  • H T (7)
  • H W (7)
No filters matching ""
Ürünleri şurada görüntüleyin:
Metrik
İnç

ORİJİNAL ÜRÜN

DWLN 95° DWLN 95°

İç çap kesme ÜNİTELERİ • D Bağlama
(1 Products)
  • Shank - PSCShank - PSC
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
Ürünleri görüntüle
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6330425 PSC50S25GDWLNL08 PSC50S25GDWLNL08 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 33.0000 1.299 WN..080408/WN..432 0.80
    Liste fiyatı:
    $521.50 /her biri
    Fiyatınız::
    Liste fiyatı:
    İndirim: %
    Fiyatınız::
    Değiştirme Bu ürün mevcut değil
    Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir

    ORİJİNAL ÜRÜN

    DCLN 95° DCLN 95°

    İç çap kesme ÜNİTELERİ • D Bağlama
    (2 Products)
    • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
    • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
    • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
    • Shank - PSCShank - PSC
    Ürünleri görüntüle
    SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
    6330408 PSC50S25GDCLNL12 PSC50S25GDCLNL12 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 0.80
      Liste fiyatı:
      $521.50 /her biri
      Fiyatınız::
      6330410 PSC50S25GDCLNR12 PSC50S25GDCLNR12 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 0.80
        Liste fiyatı:
        $521.50 /her biri
        Fiyatınız::
        Liste fiyatı:
        İndirim: %
        Fiyatınız::
        Değiştirme Bu ürün mevcut değil
        Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir

        ORİJİNAL ÜRÜN

        DDUN 93° DDUN 93°

        İç çap kesme ÜNİTELERİ • D Bağlama
        (4 Products)
        • Shank - PSCShank - PSC
        • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
        • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
        • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
        Ürünleri görüntüle
        SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
        6330421 PSC50S25GDDUNL11 PSC50S25GDDUNL11 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 DN..110408/DN..332 0.95
          Liste fiyatı:
          $521.50 /her biri
          Fiyatınız::
          6330423 PSC50S25GDDUNR11 PSC50S25GDDUNR11 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 DN..110408/DN..332 0.95
            Liste fiyatı:
            $521.50 /her biri
            Fiyatınız::
            6330422 PSC50S40LDDUNL15 PSC50S40LDDUNL15 40.0000 1.574 140.0000 5.511 118.0000 4.645 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.64
              Liste fiyatı:
              $521.50 /her biri
              Fiyatınız::
              6330424 PSC50S40LDDUNR15 PSC50S40LDDUNR15 40.0000 1.574 140.0000 5.511 118.0000 4.645 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.64
                Liste fiyatı:
                $521.50 /her biri
                Fiyatınız::
                Liste fiyatı:
                İndirim: %
                Fiyatınız::
                Değiştirme Bu ürün mevcut değil
                Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir
                product-image
                Please adjust the following properties from

                ISO Katalog Numarası

                ANSI Katalog Numarası

                to find similar products.

                Aşağıdaki CAD Çizimlerini bulduk

                Aradığınız dosyaları seçip hepsini aynı anda indirin

                Aradığınız dosya türünü bulamadınız mı?

                Bir kopya oluşturmak üzeresiniz . İlerlemek istiyor musunuz?
                Silmek üzeresiniz İlerlemek istiyor musunuz?
                öğesinin adını neyle değiştirmek istersiniz?
                Lütfen geçerli bir ad girin
                Lütfen kopya için bir ad girin
                Lütfen geçerli bir ad girin
                öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
                Lütfen geçerli bir ad girin
                Şunun bir kopyasını gönder:

                Lütfen geçerli bir E-posta girin
                Lütfen geçerli bir ad girin

                Aşağıdaki CAD Çizimlerini bulduk

                Aradığınız dosyaları seçip hepsini aynı anda indirin

                Aradığınız dosya türünü bulamadınız mı?
                Çizim Talep Et »

                Pano bilgilerinizi görmek için oturum açmalısınız
                Session expired due to inactivity, please login again
                Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
                ürün(ler) sepete başarıyla eklendi
                Sepeti Görüntüle
                DOWNLOAD TYPE:



                . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                Minimum quantity should be

                SAP Material Number ISO Katalog Numarası Kalite    
                Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                You are about to leave the Solution building process.

                Are you sure you want to leave?