Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

WIDIA Hizmetinizde

Ürüne Özel Bir Sorunuz mu Var?

Uzmanlık Alanına göre Global Hizmet Profesyonellerinin tam listesine bakın

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Back to Solution

Editing Solution

Adding Solution

Solution Name: {{SolutionName}}

P-Bağlama

Filtreleri Seçin
Filters
Filtreler
Filtreler
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (15)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (15)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (15)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (15)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (15)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (15)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (15)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (15)
  • M Stainless Steel (15)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (15)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (15)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (15)
  • K Cast Iron (15)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (15)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (15)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (15)
  • N Non-Ferrous Materials (15)
    • N1
      Wrought Aluminum
      (15)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (15)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (4)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (15)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (15)
    • N6
      Carbon, Graphite Composites, CFRP
      (14)
    • N7
      MMC's
      (15)
  • S High-Temp Alloys (15)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (15)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (15)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (15)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (15)
  • H Hardened Materials (14)
    • H1
      Hardened Materials 44-48 HRC
      (14)
    • H2
      Hardened Materials 48-55 HRC
      (14)
    • H3
      Hardened Materials 56-60 HRC
      (14)
    • H4
      Hardened Materials >60 HRC
      (14)
Applications
Applications
  • Facing Facing (15)
  • ID Facing ID Facing (15)
  • Multiple Direction Cutting Multiple Direction Cutting (15)
  • Plunge Turning Plunge Turning (15)
  • Profiling Profiling (7)
  • TRN Boring TRN Boring (15)
  • Turning Turning (15)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (15)
  • Interrupted (14)
  • Lightly Interrupted Cut (15)
  • Smooth Cut (15)
  • Varying Depth of Cut (15)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 93.0 (7)
  • 95.0 (8)
Tool Cutting Edge Angle Min - Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (10)
  • 2.0 (15)
  • 4.0 (15)
  • 8.0 (8)
Cutting Edges Per Insert Min - Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (11)
  • 0.008 in (5)
  • 0.014 in (6)
  • 0.016 in (15)
  • 0.031 in (15)
  • 0.047 in (15)
  • 0.062 in (4)
  • 0.063 in (14)
  • 0.094 in (4)
  • 0.095 in (4)
  • 0.126 in (4)
Corner Radius Min - Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (11)
  • 0.2 mm (5)
  • 0.351 mm (6)
  • 0.4 mm (15)
  • 0.8 mm (15)
  • 1.201 mm (15)
  • 1.576 mm (4)
  • 1.6 mm (14)
  • 2.375 mm (4)
  • 2.401 mm (4)
  • 3.2 mm (4)
Corner Radius Min - Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (14)
  • 241 (4)
  • CL4 (10)
  • CM2 (14)
  • CM3 (10)
  • CM4 (8)
  • CPX (14)
  • CW2 (10)
  • CW2015 (14)
  • CW5025 (14)
  • GX (4)
  • HK1500 (10)
  • HT2 (11)
  • HTX (4)
  • K060 (4)
  • K090 (14)
  • K1 (4)
  • K10M (14)
  • K10P (14)
  • K10U (10)
  • K15U (10)
  • K20K (14)
  • K21 (4)
  • K25M (15)
  • K25P (10)
  • K313 (15)
  • K35P (10)
  • K420 (8)
  • K45 (4)
  • K68 (14)
  • KB1340 (5)
  • KB1345 (4)
  • KB1610 (4)
  • KB1625 (4)
  • KB1630 (4)
  • KB5610 (4)
  • KB5625 (4)
  • KB5630 (4)
  • KB9610 (10)
  • KB9640 (5)
  • KBH10 (10)
  • KBH10B (10)
  • KBH20 (10)
  • KBH20B (10)
  • KBK35 (4)
  • KC210 (10)
  • KC250 (8)
  • KC5010 (15)
  • KC5025 (15)
  • KC5410 (14)
  • KC5510 (15)
  • KC5525 (11)
  • KC710 (4)
  • KC720 (8)
  • KC722 (4)
  • KC730 (9)
  • KC7310 (15)
  • KC732 (8)
  • KC8050 (15)
  • KC810 (15)
  • KC850 (15)
  • KC9010 (15)
  • KC9025 (15)
  • KC910 (14)
  • KC9105 (15)
  • KC9110 (15)
  • KC9120 (15)
  • KC9125 (15)
  • KC9140 (15)
  • KC9145 (14)
  • KC9210 (6)
  • KC9215 (15)
  • KC9225 (15)
  • KC9240 (15)
  • KC9240NEW (15)
  • KC9245 (15)
  • KC9315 (15)
  • KC9320 (15)
  • KC9325 (15)
  • KC935 (15)
  • KC950 (14)
  • KC990 (15)
  • KCK05 (15)
  • KCK05B (15)
  • KCK15 (15)
  • KCK15B (15)
  • KCK20 (15)
  • KCK20B (15)
  • KCM15 (15)
  • KCM15B (15)
  • KCM25 (15)
  • KCM25B (15)
  • KCM35 (14)
  • KCM35B (14)
  • KCP05 (15)
  • KCP05B (11)
  • KCP10 (15)
  • KCP10B (15)
  • KCP25 (15)
  • KCP25B (15)
  • KCP25C (15)
  • KCP30 (15)
  • KCP30B (14)
  • KCP40 (14)
  • KCP40B (14)
  • KCPK05 (15)
  • KCS10 (4)
  • KCS10B (15)
  • KCU10 (15)
  • KCU10B (15)
  • KCU25 (15)
  • KD050 (4)
  • KD081 (4)
  • KD100 (4)
  • KD120 (4)
  • KD1400 (4)
  • KD1405 (4)
  • KD1425 (4)
  • KM1 (4)
  • KMF (4)
  • KS15 (4)
  • KT1120 (4)
  • KT125 (10)
  • KT150 (4)
  • KT175 (10)
  • KT315 (11)
  • KT325 (11)
  • KU10T (11)
  • KU30T (15)
  • KY1310 (8)
  • KY1320 (14)
  • KY1540 (4)
  • KY1615 (14)
  • KY2000 (8)
  • KY2100 (4)
  • KY3000 (14)
  • KY3400 (8)
  • KY3500 (14)
  • KY4000 (8)
  • KY4300 (8)
  • KY4400 (14)
  • KYHK15B (14)
  • KYK10 (4)
  • KYK25 (8)
  • KYK35 (14)
  • KYS25 (4)
  • KYS30 (4)
  • NL200 (10)
  • NL250 (15)
  • NL300 (14)
  • NL400 (8)
  • NL920 (11)
  • P25 (4)
  • PB100 (4)
  • PB170 (4)
  • PB250 (4)
  • PB300 (4)
  • PS5 (11)
  • SP0819 (14)
  • SP3019 (8)
  • SP4019 (8)
  • THM (4)
  • THM-X (10)
  • THMF-X (4)
  • TN10P (15)
  • TN10U (10)
  • TN15M (14)
  • TN15U (10)
  • TN2000 (10)
  • TN20K (14)
  • TN20P (15)
  • TN30M (15)
  • TN30P (14)
  • TN4000 (10)
  • TN5015 (15)
  • TN5020 (15)
  • TN5105 (11)
  • TN5120 (15)
  • TN6010 (10)
  • TN6025 (10)
  • TN7005 (11)
  • TN7010 (15)
  • TN7015 (15)
  • TN7025 (15)
  • TN7035 (14)
  • TN7105 (11)
  • TN7110 (15)
  • TN7115 (15)
  • TN7125 (15)
  • TN7135 (14)
  • TN8025 (15)
  • TTI15 (11)
  • TTR (4)
  • TTS (10)
  • TTX (10)
  • WBH10C (10)
  • WBH10P (4)
  • WBH10U (4)
  • WBH20P (10)
  • WBH25P (4)
  • WBH25U (10)
  • WBH30P (4)
  • WBK40U (5)
  • WBK45U (10)
  • WDN00U (4)
  • WDN25U (4)
  • WK05CT (15)
  • WK15CT (10)
  • WK20CT (15)
  • WM15CT (15)
  • WM25CT (15)
  • WM35CT (15)
  • WP05CT (4)
  • WP15CT (15)
  • WP20TT (1)
  • WP25CT (15)
  • WP35CT (15)
  • WS10PT (15)
  • WS25PT (15)
  • WU10HT (15)
  • WU10PT (11)
  • WU25PT (11)
  • X00511 (4)
  • X00580 (4)
  • X00581 (4)
  • X00582 (4)
  • X00583 (4)
  • X00584 (4)
  • X00585 (4)
  • X00586 (4)
  • X00591 (4)
  • X00592 (4)
  • X00593 (4)
  • X00594 (4)
  • X00596 (4)
  • X00597 (4)
  • X00599 (4)
Hand Of Tool
Hand Of Tool
  • L (7)
  • R (8)
Wiper Insert
Wiper Insert
  • N (15)
  • Y (11)
F Dimension
F Dimension
  • 17.0 mm (3)
  • 22.0 mm (4)
  • 27.0 mm (4)
  • 35.0 mm (4)
F Dimension Min - F Dimension Max
F Dimension
F Dimension
  • 0.669 in (3)
  • 0.866 in (4)
  • 1.063 in (4)
  • 1.379 in (4)
F Dimension Min - F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 32.0 mm (3)
  • 40.0 mm (4)
  • 50.0 mm (4)
  • 63.0 mm (4)
Minimum Axial Groove Diameter Min - Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.26 in (3)
  • 1.575 in (4)
  • 1.969 in (4)
  • 2.48 in (4)
Minimum Axial Groove Diameter Min - Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (8)
  • E (7)
Maximum Bore Depth
Maximum Bore Depth
  • 2.914 in (3)
  • 3.307 in (4)
  • 4.529 in (4)
  • 5.984 in (4)
Maximum Bore Depth Min - Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 74.0 mm (3)
  • 84.0 mm (4)
  • 115.0 mm (4)
  • 152.0 mm (4)
Maximum Bore Depth Min - Maximum Bore Depth Max
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (8)
  • D-DIAMOND/RHOMBIC 55 (7)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (11)
  • B L (10)
  • C A (14)
  • C N (14)
  • D P (10)
  • H T (11)
  • H W (15)
No filters matching ""
Ürünleri şurada görüntüleyin:
Metrik
İnç

ORİJİNAL ÜRÜN

PDUN 93° PDUN 93°

İç çap kesme ÜNİTELERİ • P Bağlama
(7 Products)
  • Shank - PSCShank - PSC
  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
Ürünleri görüntüle
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6342959 PSC63S25HPDUNR11 PSC63S25HPDUNR11 25.0000 .9843 100.0000 3.937 74.0000 2.913 17.0000 .6693 32.0000 1.259 DN..110408/DN..332 1.26
    Liste fiyatı:
    $580.74 /her biri
    Fiyatınız::
    6342956 PSC63S32JPDUNL15 PSC63S32JPDUNL15 32.0000 1.259 110.0000 4.330 84.0000 3.307 22.0000 .8661 40.0000 1.574 DN..150608/DN..442 1.00
      Liste fiyatı:
      $580.74 /her biri
      Fiyatınız::
      6342960 PSC63S32JPDUNR15 PSC63S32JPDUNR15 32.0000 1.259 110.0000 4.330 84.0000 3.307 22.0000 .8661 40.0000 1.574 DN..150608/DN..442 1.00
        Liste fiyatı:
        $580.74 /her biri
        Fiyatınız::
        6342957 PSC63S40LPDUNL15 PSC63S40LPDUNL15 40.0000 1.574 140.0000 5.511 115.0000 4.527 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.00
          Liste fiyatı:
          $580.74 /her biri
          Fiyatınız::
          6342961 PSC63S40LPDUNR15 PSC63S40LPDUNR15 40.0000 1.574 140.0000 5.511 115.0000 4.527 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.00
            Liste fiyatı:
            $580.74 /her biri
            Fiyatınız::
            6342958 PSC63S50XPDUNL15 PSC63S50XPDUNL15 50.0000 1.968 175.0000 6.889 152.0000 5.984 35.0000 1.378 63.0000 2.480 DN..150608/DN..442 2.70
              Liste fiyatı:
              $580.74 /her biri
              Fiyatınız::
              Liste fiyatı:
              İndirim: %
              Fiyatınız::
              Değiştirme Bu ürün mevcut değil
              Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir

              ORİJİNAL ÜRÜN

              PCLN 95° PCLN 95°

              İç çap kesme ÜNİTELERİ • P Bağlama
              (8 Products)
              • Shank - PSCShank - PSC
              • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
              • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
              • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
              Ürünleri görüntüle
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
              6342947 PSC63S25HPCLNL12 PSC63S25HPCLNL12 25.0000 .9843 100.0000 3.937 74.0000 2.913 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 1.27
                Liste fiyatı:
                $580.74 /her biri
                Fiyatınız::
                6342951 PSC63S25HPCLNR12 PSC63S25HPCLNR12 25.0000 .9843 100.0000 3.937 74.0000 2.913 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 1.27
                  Liste fiyatı:
                  $580.74 /her biri
                  Fiyatınız::
                  6342948 PSC63S32JPCLNL12 PSC63S32JPCLNL12 32.0000 1.259 110.0000 4.330 84.0000 3.307 22.0000 .8661 40.0000 1.574 CN..120408/CN..432 1.51
                    Liste fiyatı:
                    $580.74 /her biri
                    Fiyatınız::
                    6342952 PSC63S32JPCLNR12 PSC63S32JPCLNR12 32.0000 1.259 110.0000 4.330 84.0000 3.307 22.0000 .8661 40.0000 1.574 CN..120408/CN..432 1.51
                      Liste fiyatı:
                      $580.74 /her biri
                      Fiyatınız::
                      6342949 PSC63S40LPCLNL16 PSC63S40LPCLNL16 40.0000 1.574 140.0000 5.511 115.0000 4.527 27.0000 1.063 50.0000 1.969 CN..160612/CN..543 1.70
                        Liste fiyatı:
                        $580.74 /her biri
                        Fiyatınız::
                        6342954 PSC63S50XPCLNR16 PSC63S50XPCLNR16 50.0000 1.968 175.0000 6.889 152.0000 5.984 35.0000 1.378 63.0000 2.480 CN..160612/CN..543 2.70
                          Liste fiyatı:
                          $580.74 /her biri
                          Fiyatınız::
                          Liste fiyatı:
                          İndirim: %
                          Fiyatınız::
                          Değiştirme Bu ürün mevcut değil
                          Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir
                          product-image
                          Please adjust the following properties from

                          ISO Katalog Numarası

                          ANSI Katalog Numarası

                          to find similar products.

                          Aşağıdaki CAD Çizimlerini bulduk

                          Aradığınız dosyaları seçip hepsini aynı anda indirin

                          Aradığınız dosya türünü bulamadınız mı?

                          Bir kopya oluşturmak üzeresiniz . İlerlemek istiyor musunuz?
                          Silmek üzeresiniz İlerlemek istiyor musunuz?
                          öğesinin adını neyle değiştirmek istersiniz?
                          Lütfen geçerli bir ad girin
                          Lütfen kopya için bir ad girin
                          Lütfen geçerli bir ad girin
                          öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
                          Lütfen geçerli bir ad girin
                          Şunun bir kopyasını gönder:

                          Lütfen geçerli bir E-posta girin
                          Lütfen geçerli bir ad girin

                          Aşağıdaki CAD Çizimlerini bulduk

                          Aradığınız dosyaları seçip hepsini aynı anda indirin

                          Aradığınız dosya türünü bulamadınız mı?
                          Çizim Talep Et »

                          Pano bilgilerinizi görmek için oturum açmalısınız
                          Session expired due to inactivity, please login again
                          Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
                          ürün(ler) sepete başarıyla eklendi
                          Sepeti Görüntüle
                          DOWNLOAD TYPE:



                          . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                          Minimum quantity should be

                          SAP Material Number ISO Katalog Numarası Kalite    
                          Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                          You are about to leave the Solution building process.

                          Are you sure you want to leave?