successfully added to cart
View Cart

Notifications

Mark all as read
ISO/ANSI Inserts
ISO/ANSI Inserts
ISO/ANSI Inserts
ISO/ANSI Inserts

Cubic Boron Nitride (CBN) Inserts • DNGA-MT

ISO/ANSI Inserts

Workpiece Materials

K Cast Iron
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • K Cast Iron (1)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1)
  • H Hardened Materials (8)
    • H1
      Hardened Materials 44-48 HRC
      (8)
    • H2
      Hardened Materials 48-55 HRC
      (8)
    • H3
      Hardened Materials 56-60 HRC
      (8)
    • H4
      Hardened Materials >60 HRC
      (8)
Cutting Condition
  • Heavily Interrupted Cut (1)
  • Lightly Interrupted Cut (5)
  • Smooth Cut (5)
  • Varying Depth of Cut (2)
Cutting Condition Material
  • H-All (6)
Corner configuration
Corner Radius
  • 0.4 (3)
  • 0.794 (1)
  • 0.8 (5)
to
Corner Radius
  • 0.0156 (3)
  • 0.0312 (1)
  • 0.0313 (5)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Heavily Interrupted Cut (1)
  • Lightly Interrupted Cut (5)
  • Smooth Cut (5)
  • Varying Depth of Cut (2)
Grade Of Cutting Tool
  • WBH10P (2)
  • WBH20P (3)
  • WBH25P (2)
  • WBH30P (1)
  • WBK45U (1)
Insert Geometry
Cutting Edge Length
  • 0.61 (1)
  • 0.6104 (8)
to
Cutting Edge Length
  • 15.5 (1)
  • 15.504 (8)
to
Cutting Tool Material
  • B H (1)
  • B L (7)
  • H W (1)
other
Grade
  • WBH10P (2)
  • WBH20P (3)
  • WBH25P (2)
  • WBH30P (1)
  • WBK45U (1)
Tool Unit
  • I (9)
  • M (9)
Drilling Condition Material
  • H-All (6)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 9 of 9 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
5108479 DNGA150408S01025MT DNGA432S0425MT WBH30P 12.7000 .5000 15.5040 .6104 4.7820 .1883 0.8000 .0312 5.1600 .2031
    List price:
    $85.28 /each.
    Your price::
    Qty
    3883532 DNGA150404S01025MT DNGA431S0425MT WBH10P 12.7000 .5000 15.5040 .6104 4.7820 .1883 0.4000 .0156 5.1600 .2031
      List price:
      $82.13 /each.
      Your price::
      Qty
      3883533 DNGA150408S01025MT DNGA432S0425MT WBH10P 12.7000 .5000 15.5040 .6104 4.7820 .1883 0.8000 .0312 5.1600 .2031
        List price:
        $82.13 /each.
        Your price::
        Qty
        3883888 DNGA150404S01025MT DNGA431S0425MT WBH25P 12.7000 .5000 15.5040 .6104 4.7820 .1883 0.4000 .0156 5.1600 .2031
          List price:
          $73.16 /each.
          Your price::
          Qty
          3883889 DNGA150408S01025MT DNGA432S0425MT WBH25P 12.7000 .5000 15.5040 .6104 4.7820 .1883 0.8000 .0312 5.1600 .2031
            List price:
            $73.16 /each.
            Your price::
            Qty
            3898678 DNGA150408S01020MT DNGA432S0420MT WBK45U 12.7000 .5000 15.5040 .6104 4.7620 .1875 0.8000 .0312 5.1600 .2030
              List price:
              $86.26 /each.
              Your price::
              Qty
              6904829 DNGA150408S01025MT DNGA432S0425MT WBH20P 12.7000 .5000 15.5040 .6104 4.7820 .1883 0.8000 .0312 5.1600 .2031
                List price:
                $74.80 /each.
                Your price::
                Qty
                6904830 DNGA150608S01225MT DNGA442S0525MT WBH20P 12.7000 .5000 15.5000 .6100 6.3700 .2508 0.7940 .0312 5.1600 .2030
                  List price:
                  $74.80 /each.
                  Your price::
                  Qty
                  6904828 DNGA150404S01025MT DNGA431S0425MT WBH20P 12.7000 .5000 15.5040 .6104 4.7820 .1883 0.4000 .0156 5.1600 .2031
                    List price:
                    $74.80 /each.
                    Your price::
                    Qty
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    Qty

                    Sold in pkg. of

                    Grades

                    • WBH10C

                      A low content CBN grade with a MT-CVD/CVD — TiN-TiCN-Al203-TiN coating for protection against crater wear. Designed for precision machining of hardened steels (>48 HRC), effectively applied on bearing steels, hot and cold work tool steels, high-speed steels, die steels, case-hardened steels, carburized and nitrided irons, and some hard coatings. Do not use on soft steels.

                    • WBH10P

                      A low content CBN grade with a PVD-TiAlN coating for added wear resistance. Designed for precision machining of hardened steels (>45 HRC); the harder the steel the better. PVD coating offers improved wear resistance and excellent surface finish capability. Effectively applied on bearing steels, hot and cold work tool steels, high-speed steels, die steels, case-hardened steels, carburized and nitrided irons, and some hard coatings.

                      H Hardened Materials
                    • WBH10U

                      A low CBN content, CBN tip brazed onto a carbide insert. Designed for precision finishing in smooth cuts on hardened steels (>45 HRC) where optimal surface finish is needed. Use on bearing steel, hot and cold work tool steels, high-speed steels, die steels, case-hardened steels, carburized and nitrided irons, and some hard coatings. Do not apply on soft steel as rapid crater wear will result.

                      H Hardened Materials
                    • WBH20P
                      H Hardened Materials
                    • WBH25P

                      A PVD-TiAlN coating over a low content, CBN tip brazed onto a carbide insert. Designed for roughing to finishing of hardened steels (>45 HRC). Use on bearing steel, hot and cold work tool steels, high-speed steels, die steels, case-hardened steels, carburized and nitrided irons, and some hard coatings.

                      H Hardened Materials
                    • WBH25U

                      A low CBN content, CBN tip brazed onto a carbide insert. Designed for roughing to finishing of hardened steels (>45 HRC) where optimal surface finish is needed. Use in continuous to interrupted cutting of bearing steel, hot and cold work tool steels, high-speed steels, die steels, case-hardened steels, carburized and nitrided irons, and some hard coatings.

                      H Hardened Materials
                    • WBH30P

                      A PVD-TiAlN coating over a low content, CBN tip brazed onto a carbide insert. Designed for roughing to finishing in interrupted cuts on hardened steels (>45 HRC). Applied on gray cast iron, chilled irons, high-chrome alloyed steels, high-temp alloys, and sintered powdered metals.

                      H Hardened Materials
                    • WBK45U

                      A high CBN content, CBN tip brazed onto a carbide insert. Applied in roughing to finishing of fully pearlitic gray cast iron, chilled irons, high-chrome alloyed steels, sintered powdered metals, and heavy cuts in hardened steels (>45 HRC). Use for finishing chilled and fully pearlitic cast iron. Available in a wide range of insert styles, including positive rake geometries ideally suited for boring applications.

                      K Cast Iron
                    product-image
                    Please adjust the following properties from

                    ISO Catalog Number

                    ANSI Catalog Number

                    to find similar products.
                    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                    You are about to create a duplicate . Do you want to proceed?
                    You are about to delete Do you want to proceed?
                    What would you like to rename your to?
                    Please enter a valid name
                    Please enter a name for the duplicate
                    Please enter a valid name
                    You are about to add to your My Solutions page. Do you want to proceed?
                    Please enter a valid name
                    Send a copy of

                    Please enter a valid Email
                    Please enter a valid name

                    We have found the following CAD Drawings

                    Select the files you are looking for and download them all at once

                    You should be logged to see your dashboard information
                    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                    item(s) successfully added to the cart
                    View Cart