successfully added to cart
View Cart

Notifications

Mark all as read
ISO/ANSI Inserts
ISO/ANSI Inserts
ISO/ANSI Inserts
ISO/ANSI Inserts

Cubic Boron Nitride (CBN) Inserts • TNGA-MT

ISO/ANSI Inserts

Workpiece Materials

K Cast Iron
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • H Hardened Materials (5)
    • H1
      Hardened Materials 44-48 HRC
      (5)
    • H2
      Hardened Materials 48-55 HRC
      (5)
    • H3
      Hardened Materials 56-60 HRC
      (5)
    • H4
      Hardened Materials >60 HRC
      (5)
Cutting Condition
  • Lightly Interrupted Cut (5)
  • Smooth Cut (5)
  • Varying Depth of Cut (2)
Corner configuration
Corner Radius
  • 0.397 (2)
  • 0.8 (2)
  • 1.191 (1)
to
Corner Radius
  • 0.0156 (2)
  • 0.0313 (2)
  • 0.0469 (1)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Lightly Interrupted Cut (5)
  • Smooth Cut (5)
  • Varying Depth of Cut (2)
Grade Of Cutting Tool
  • WBH20P (3)
  • WBH25P (2)
Insert Geometry
Cutting Edge Length
  • 0.6496 (4)
  • 0.65 (1)
to
other
Grade
  • WBH20P (3)
  • WBH25P (2)
Tool Unit
  • I (5)
  • M (5)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 5 of 5 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
3883329 TNGA160404S01025MT TNGA331S0425MT WBH25P 9.5250 .3750 16.5000 .6496 4.7820 .1883 0.3970 .0156 3.8100 .1500
    List price:
    $100.49 /each.
    Your price::
    Qty
    3883892 TNGA160408S01025MT TNGA332S0425MT WBH25P 9.5250 .3750 16.5000 .6496 4.7820 .1883 0.8000 .0312 3.8100 .1500
      List price:
      $100.49 /each.
      Your price::
      Qty
      6904857 TNGA160408S01025MT TNGA332S0425MT WBH20P 9.5250 .3750 16.5000 .6496 4.7820 .1883 0.8000 .0312 3.8100 .1500
        List price:
        $102.50 /each.
        Your price::
        Qty
        6904856 TNGA160404S01025MT TNGA331S0425MT WBH20P 9.5250 .3750 16.5000 .6496 4.7820 .1883 0.3970 .0156 3.8100 .1500
          List price:
          $102.50 /each.
          Your price::
          Qty
          6904865 TNGA160412S01225MT TNGA333S0525MT WBH20P 9.5250 .3750 16.5000 .6500 4.7820 .1883 1.1910 .0469 3.8100 .1500
            List price:
            $102.50 /each.
            Your price::
            Qty
            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor
            Qty

            Sold in pkg. of

            Grades

            • WBH10U

              A low CBN content, CBN tip brazed onto a carbide insert. Designed for precision finishing in smooth cuts on hardened steels (>45 HRC) where optimal surface finish is needed. Use on bearing steel, hot and cold work tool steels, high-speed steels, die steels, case-hardened steels, carburized and nitrided irons, and some hard coatings. Do not apply on soft steel as rapid crater wear will result.

              H Hardened Materials
            • WBH20P
              H Hardened Materials
            • WBH25P

              A PVD-TiAlN coating over a low content, CBN tip brazed onto a carbide insert. Designed for roughing to finishing of hardened steels (>45 HRC). Use on bearing steel, hot and cold work tool steels, high-speed steels, die steels, case-hardened steels, carburized and nitrided irons, and some hard coatings.

              H Hardened Materials
            • WBH25U

              A low CBN content, CBN tip brazed onto a carbide insert. Designed for roughing to finishing of hardened steels (>45 HRC) where optimal surface finish is needed. Use in continuous to interrupted cutting of bearing steel, hot and cold work tool steels, high-speed steels, die steels, case-hardened steels, carburized and nitrided irons, and some hard coatings.

              H Hardened Materials
            • WBK45U

              A high CBN content, CBN tip brazed onto a carbide insert. Applied in roughing to finishing of fully pearlitic gray cast iron, chilled irons, high-chrome alloyed steels, sintered powdered metals, and heavy cuts in hardened steels (>45 HRC). Use for finishing chilled and fully pearlitic cast iron. Available in a wide range of insert styles, including positive rake geometries ideally suited for boring applications.

              K Cast Iron
            product-image
            Please adjust the following properties from

            ISO Catalog Number

            ANSI Catalog Number

            to find similar products.
            If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
            You are about to create a duplicate . Do you want to proceed?
            You are about to delete Do you want to proceed?
            What would you like to rename your to?
            Please enter a valid name
            Please enter a name for the duplicate
            Please enter a valid name
            You are about to add to your My Solutions page. Do you want to proceed?
            Please enter a valid name
            Send a copy of

            Please enter a valid Email
            Please enter a valid name

            We have found the following CAD Drawings

            Select the files you are looking for and download them all at once

            You should be logged to see your dashboard information
            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
            item(s) successfully added to the cart
            View Cart