Internal Cutting Units • Top Thread™ and Top Groove™ Threading and Grooving
Internal Cutting Units • Top Thread™ and Top Groove™ Threading and Grooving
Internal Cutting Units • Top Thread™ and Top Groove™ Threading and Grooving
Internal Cutting Units • Top Thread™ and Top Groove™ Threading and Grooving

NE 90°

Internal Cutting Units • Top Thread™ and Top Groove™ Threading and Grooving

Uses and application

  • Shank - PSCShank - PSC
  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (7)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (7)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (7)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (7)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (7)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (7)
  • M Stainless Steel (7)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (7)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (7)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (7)
  • K Cast Iron (7)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (7)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (7)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (7)
  • N Non-Ferrous Materials (7)
    • N1
      Wrought Aluminum
      (7)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (7)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (7)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (7)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (7)
    • N6
      Carbon, Graphite Composites, CFRP
      (7)
    • N7
      MMC's
      (7)
  • S High-Temp Alloys (7)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (7)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (7)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (7)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (7)
  • H Hardened Materials (7)
    • H1
      Hardened Materials 44-48 HRC
      (7)
    • H2
      Hardened Materials 48-55 HRC
      (7)
    • H3
      Hardened Materials 56-60 HRC
      (5)
    • H4
      Hardened Materials >60 HRC
      (5)
Type of Thread
Type of Thread
  • 60 (7)
  • ACME (5)
  • API (5)
  • API RD (4)
  • BSW (4)
  • BUTTRESS (7)
  • M (6)
  • NPT (4)
  • STUB ACME (4)
  • UN (7)
  • UNJ (4)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (7)
  • Lightly Interrupted Cut (7)
  • Smooth Cut (7)
  • Varying Depth of Cut (7)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (7)
  • 2.0 (7)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (4)
  • 0.003 in (7)
  • 0.004 in (6)
  • 0.005 in (4)
  • 0.006 in (5)
  • 0.007 in (7)
  • 0.008 in (7)
  • 0.01 in (7)
  • 0.011 in (4)
  • 0.012 in (4)
  • 0.014 in (5)
  • 0.016 in (4)
  • 0.017 in (4)
  • 0.019 in (5)
  • 0.02 in (6)
  • 0.023 in (5)
  • 0.03 in (2)
  • 0.031 in (6)
  • 0.035 in (5)
  • 0.039 in (6)
  • 0.047 in (6)
  • 0.049 in (6)
  • 0.06 in (6)
  • 0.062 in (4)
  • 0.063 in (7)
  • 0.069 in (6)
  • 0.078 in (4)
  • 0.079 in (5)
  • 0.089 in (5)
  • 0.095 in (5)
  • 0.098 in (1)
  • 0.125 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (4)
  • 0.076 mm (7)
  • 0.1 mm (6)
  • 0.125 mm (4)
  • 0.151 mm (5)
  • 0.176 mm (7)
  • 0.2 mm (7)
  • 0.225 mm (4)
  • 0.25 mm (7)
  • 0.275 mm (4)
  • 0.301 mm (4)
  • 0.325 mm (5)
  • 0.351 mm (5)
  • 0.4 mm (4)
  • 0.426 mm (4)
  • 0.45 mm (5)
  • 0.476 mm (1)
  • 0.5 mm (6)
  • 0.576 mm (5)
  • 0.75 mm (2)
  • 0.775 mm (6)
  • 0.9 mm (5)
  • 1.0 mm (6)
  • 1.201 mm (6)
  • 1.25 mm (6)
  • 1.5 mm (6)
  • 1.576 mm (4)
  • 1.6 mm (7)
  • 1.75 mm (6)
  • 1.975 mm (4)
  • 2.0 mm (5)
  • 2.25 mm (5)
  • 2.401 mm (5)
  • 2.5 mm (1)
  • 3.176 mm (1)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (6)
  • K313 (7)
  • K420 (7)
  • K4H (4)
  • K68 (7)
  • KB1345 (5)
  • KB1630 (5)
  • KB5625 (4)
  • KBH20 (1)
  • KC250 (6)
  • KC5010 (7)
  • KC5025 (7)
  • KC5410 (7)
  • KC710 (7)
  • KC720 (7)
  • KC722 (7)
  • KC730 (7)
  • KC732 (4)
  • KC810 (7)
  • KC850 (7)
  • KC910 (4)
  • KC9110 (7)
  • KC9120 (4)
  • KC9320 (7)
  • KC935 (7)
  • KC950 (7)
  • KCK20 (5)
  • KCK20B (7)
  • KCP10B (7)
  • KCP25B (7)
  • KCU10 (7)
  • KCU25 (7)
  • KD050 (1)
  • KD081 (4)
  • KD100 (4)
  • KD120 (5)
  • KD1425 (4)
  • KT175 (6)
  • KT315 (7)
  • KU10T (7)
  • KU25T (7)
  • KU30T (7)
  • KY3000 (5)
  • THM (6)
  • TN10P (4)
  • TN6010 (7)
  • TN6025 (7)
  • TN7110 (7)
  • WU10HT (1)
  • WU10PT (1)
  • WU25PT (3)
Hand Of Tool
Hand Of Tool
  • L (4)
  • R (3)
F Dimension
F Dimension
  • 11.0 mm (1)
  • 13.0 mm (1)
  • 17.0 mm (1)
  • 22.0 mm (2)
  • 27.0 mm (2)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.433 in (1)
  • 0.512 in (1)
  • 0.669 in (1)
  • 0.866 in (2)
  • 1.063 in (2)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 20.0 mm (1)
  • 24.0 mm (1)
  • 33.5 mm (1)
  • 38.5 mm (2)
  • 48.5 mm (1)
  • 52.5 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.787 in (1)
  • 0.946 in (1)
  • 1.319 in (1)
  • 1.516 in (2)
  • 1.909 in (1)
  • 2.067 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Bore Depth
Maximum Bore Depth
  • 2.008 in (1)
  • 2.52 in (3)
  • 3.48 in (1)
  • 4.449 in (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 51.0 mm (1)
  • 64.0 mm (3)
  • 88.4 mm (1)
  • 113.0 mm (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Cutting Width
Cutting Width
  • 0.02 in (2)
  • 0.031 in (2)
  • 0.035 in (2)
  • 0.039 in (6)
  • 0.041 in (2)
  • 0.047 in (6)
  • 0.055 in (2)
  • 0.058 in (2)
  • 0.06 in (6)
  • 0.061 in (2)
  • 0.062 in (6)
  • 0.067 in (2)
  • 0.069 in (6)
  • 0.073 in (4)
  • 0.077 in (2)
  • 0.078 in (4)
  • 0.079 in (6)
  • 0.088 in (6)
  • 0.089 in (5)
  • 0.094 in (1)
  • 0.095 in (6)
  • 0.097 in (4)
  • 0.098 in (6)
  • 0.105 in (4)
  • 0.108 in (6)
  • 0.11 in (4)
  • 0.119 in (7)
  • 0.122 in (4)
  • 0.125 in (7)
  • 0.126 in (7)
  • 0.128 in (6)
  • 0.129 in (2)
  • 0.131 in (1)
  • 0.138 in (7)
  • 0.143 in (4)
  • 0.147 in (2)
  • 0.15 in (2)
  • 0.152 in (2)
  • 0.156 in (4)
  • 0.157 in (5)
  • 0.167 in (5)
  • 0.169 in (4)
  • 0.177 in (5)
  • 0.178 in (4)
  • 0.185 in (5)
  • 0.188 in (5)
  • 0.189 in (5)
  • 0.192 in (1)
  • 0.193 in (1)
  • 0.195 in (4)
  • 0.197 in (1)
  • 0.202 in (1)
  • 0.213 in (1)
  • 0.217 in (1)
  • 0.219 in (1)
  • 0.237 in (1)
  • 0.25 in (1)
  • 0.255 in (1)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (2)
  • 0.775 mm (2)
  • 0.8 mm (2)
  • 0.9 mm (2)
  • 1.0 mm (6)
  • 1.05 mm (2)
  • 1.201 mm (6)
  • 1.401 mm (2)
  • 1.475 mm (2)
  • 1.5 mm (6)
  • 1.55 mm (2)
  • 1.576 mm (6)
  • 1.701 mm (2)
  • 1.75 mm (6)
  • 1.826 mm (4)
  • 1.951 mm (2)
  • 1.975 mm (4)
  • 2.0 mm (6)
  • 2.2 mm (6)
  • 2.225 mm (6)
  • 2.25 mm (5)
  • 2.375 mm (1)
  • 2.401 mm (6)
  • 2.475 mm (4)
  • 2.5 mm (6)
  • 2.676 mm (4)
  • 2.75 mm (6)
  • 2.801 mm (4)
  • 3.0 mm (7)
  • 3.1 mm (4)
  • 3.176 mm (7)
  • 3.2 mm (7)
  • 3.25 mm (6)
  • 3.276 mm (2)
  • 3.325 mm (1)
  • 3.5 mm (7)
  • 3.6 mm (4)
  • 3.725 mm (2)
  • 3.801 mm (2)
  • 3.85 mm (2)
  • 3.95 mm (4)
  • 3.975 mm (1)
  • 4.0 mm (5)
  • 4.25 mm (5)
  • 4.3 mm (4)
  • 4.5 mm (5)
  • 4.525 mm (4)
  • 4.7 mm (5)
  • 4.775 mm (5)
  • 4.801 mm (5)
  • 4.875 mm (1)
  • 4.9 mm (1)
  • 4.95 mm (4)
  • 5.0 mm (1)
  • 5.125 mm (1)
  • 5.4 mm (1)
  • 5.5 mm (1)
  • 5.575 mm (1)
  • 6.0 mm (1)
  • 6.351 mm (1)
  • 6.476 mm (1)
Cutting Width Min to Cutting Width Max
Insert Size
Insert Size
  • 2 (2)
  • 3 (4)
  • 4 (1)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.138 in (2)
  • 0.21 in (4)
  • 0.294 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 3.5 mm (2)
  • 5.325 mm (4)
  • 7.476 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (5)
  • B L (4)
  • C N (5)
  • D P (4)
  • H T (7)
  • H W (7)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 7 of 7 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6338414 PSC50S16FNEL2 PSC50S16FNEL2 16.0000 .6299 80.0000 3.149 51.0000 2.007 11.0000 .4331 20.0000 .7874 NG2R 0.53
    List price:
    $581.36 /each
    Your price:
    Qty
    6338412 PSC50S20HNEL2 PSC50S20HNEL2 20.0000 .7874 100.0000 3.937 64.0000 2.519 13.0000 .5118 24.0000 .9449 NG2R 0.66
      List price:
      $581.36 /each
      Your price:
      Qty
      6338406 PSC50S25JNER3 PSC50S25JNER3 25.0000 .9843 110.0000 4.330 88.4000 3.480 17.0000 .6693 33.5000 1.318 NG3L 1.18
        List price:
        $581.36 /each
        Your price:
        Qty
        6338404 PSC50S32GNEL3 PSC50S32GNEL3 32.0000 1.259 90.0000 3.543 64.0000 2.519 22.0000 .8661 38.5000 1.515 NG3R 1.18
          List price:
          $581.36 /each
          Your price:
          Qty
          6338402 PSC50S32GNER3 PSC50S32GNER3 32.0000 1.259 90.0000 3.543 64.0000 2.519 22.0000 .8661 38.5000 1.515 NG3L 0.79
            List price:
            $581.36 /each
            Your price:
            Qty
            6338416 PSC50S40LNEL4 PSC50S40LNEL4 40.0000 1.574 140.0000 5.511 113.0000 4.448 27.0000 1.063 48.5000 1.909 NG4R 1.48
              List price:
              $581.36 /each
              Your price:
              Qty
              6338401 PSC50S40LNER3 PSC50S40LNER3 40.0000 1.574 140.0000 5.511 113.0000 4.448 27.0000 1.063 52.5000 2.066 NG3L 1.48
                List price:
                $581.36 /each
                Your price:
                Qty
                List price:
                Discount: %
                Your price:
                Replacement This item is no longer available
                Replacement Product Please contact customer service for assistance
                Qty

                Sold in pkg. of

                product-image
                Please adjust the following properties from

                ISO Catalog Number

                ANSI Catalog Number

                to find similar products.

                The following CAD files are available

                Please select a file to download

                You are about to create a duplicate . Do you want to proceed?
                You are about to delete Do you want to proceed?
                What would you like to rename your to?
                Please enter a valid name
                Please enter a name for the duplicate
                Please enter a valid name
                You are about to add to your My Solutions page. Do you want to proceed?
                Please enter a valid name
                Send a copy of

                Please enter a valid Email
                Please enter a valid name

                The following CAD files are available

                Please select a file to download

                You should be logged to see your dashboard information
                Session expired due to inactivity, please login again
                The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                item(s) successfully added to the cart
                View Cart
                DOWNLOAD TYPE:



                . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                Minimum quantity should be

                SAP Material Number ISO Catalog Number Grade    
                Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                You are about to leave the Solution building process.

                Are you sure you want to leave?