COVID-19: How WIDIA is responding
45° • Shell Mills • Inch
45° • Shell Mills • Inch
45° • Shell Mills • Inch
45° • Shell Mills • Inch

Victory™ M1200 Mini • Shell Mills

45° • Shell Mills • Inch

Features and benefits

  • Twelve cutting edges.

  • First choice for low depth-of-cut face milling.

  • Maximum number of teeth per diameter.

Uses and application

  • Milling - Side and FaceMilling - Side and Face
  • Face MillingFace Milling
  • Side Milling/Shoulder Milling: Eased ChamferSide Milling/Shoulder Milling: Eased Chamfer
  • Milling - Through CoolantMilling - Through Coolant

Workpiece Materials

P
M
K
N
S
H
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (17)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (17)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (17)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (17)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (17)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (17)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (17)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (17)
  • M Stainless Steel (17)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (17)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (17)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (17)
  • K Cast Iron (17)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (17)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (17)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (17)
  • N Non-Ferrous Materials (17)
    • N1
      Wrought Aluminum
      (17)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (17)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (17)
  • S High-Temp Alloys (17)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (17)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (17)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (17)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (17)
  • H Hardened Materials (17)
    • H1
      Hardened Materials 44-48 HRC
      (17)
Select First Choice
  • US (4)
Applications
  • Chamfer Milling Chamfer Milling (17)
  • Face Milling Face Milling (17)
Cutting Diameter
  • 38.1 (2)
  • 50.8 (3)
  • 63.5 (3)
  • 76.2 (3)
  • 101.6 (3)
  • 127.0 (3)
to
Cutting Diameter
  • 1.5 (2)
  • 2.0 (3)
  • 2.5 (3)
  • 3.0 (3)
  • 4.0 (3)
  • 5.0 (3)
to
Cutting Length
  • 0.136 (2)
  • 0.138 (15)
to
Cutting Length
  • 3.5 (17)
to
Tool Cutting Edge Angle
  • 45.0 (17)
to
Cutting Edges Per Insert
  • 3.0 (17)
  • 12.0 (17)
to
Corner configuration
Corner Radius
  • 1.2 (17)
  • 1.3 (17)
  • 3.2 (17)
  • 3.21 (17)
to
Corner Radius
  • 0.0469 (17)
  • 0.0472 (17)
  • 0.051 (17)
  • 0.126 (17)
  • 0.1264 (17)
to
Application
Grade Of Cutting Tool
  • THM-U (17)
  • TN5515 (17)
  • TN6501 (17)
  • TN6505 (17)
  • TN6510 (17)
  • TN6520 (17)
  • TN6525 (17)
  • TN6540 (17)
  • TN7535 (17)
  • WK15CM (17)
  • WP25PM (17)
  • WP35CM (17)
  • WP40PM (17)
  • WS30PM (17)
  • WS40PM (17)
Front-End
Insert Shape
  • H-HEXAGON 120 (17)
Back-End
Back-End Diameter
  • 0.5 (2)
  • 0.75 (6)
  • 1.0 (3)
  • 1.5 (6)
to
Back-End Diameter
  • 12.7 (2)
  • 19.05 (6)
  • 25.4 (3)
  • 38.1 (6)
to
other
Platform
  • M1200 Series (17)
Tool Unit
  • I (17)
Over All Length [L]
  • 40.0 (8)
  • 44.45 (6)
  • 60.452 (3)
to
Over All Length [L]
  • 1.575 (8)
  • 1.75 (6)
  • 2.38 (3)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 17 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Pounds
3954485 M1200D200Z04S075HN07 M1200D200Z04S075HN07   50.8000 2.000 59.5100 2.343 19.05 .75 44.4500 1.750 40.0000 1.575 3.5000 .1380 4 12500 Y 1.00
    3954486 M1200D200Z05S075HN07 M1200D200Z05S075HN07   50.8000 2.000 59.5100 2.343 19.05 .75 44.4500 1.750 40.0000 1.575 3.5000 .1380 5 12500 Y 1.02
      3954491 M1200D300Z05S100HN07 M1200D300Z05S100HN07   76.2000 3.000 84.9000 3.343 25.4 1.0 55.6000 2.189 44.4500 1.750 3.5000 .1380 5 8300 Y 2.00
        3954492 M1200D300Z08S100HN07 M1200D300Z08S100HN07   76.2000 3.000 84.9000 3.343 25.4 1.0 55.6000 2.189 44.4500 1.750 3.5000 .1380 8 8300 Y 2.25
          4136461 M1200D150Z04S050HN07 M1200D150Z04S050HN07   38.1000 1.500 46.8160 1.813 12.7 .5 36.5800 1.440 40.0000 1.575 3.5000 .1360 4 15800 Y 0.55
            4136462 M1200D150Z05S050HN07 M1200D150Z05S050HN07   38.1000 1.500 46.8160 1.813 12.7 .5 36.5800 1.440 40.0000 1.575 3.5000 .1360 5 15800 Y 0.55
              3954487 M1200D200Z06S075HN07 M1200D200Z06S075HN07   50.8000 2.000 59.5100 2.343 19.05 .75 44.4500 1.750 40.0000 1.575 3.5000 .1380 6 12500 Y 1.00
                3954488 M1200D250Z04S075HN07 M1200D250Z04S075HN07   63.5000 2.500 72.2050 2.843 19.05 .75 44.4500 1.750 40.0000 1.575 3.5000 .1380 4 10000 Y 1.27
                  3954489 M1200D250Z06S075HN07 M1200D250Z06S075HN07   63.5000 2.500 72.2050 2.843 19.05 .75 44.4500 1.750 40.0000 1.575 3.5000 .1380 6 10000 Y 1.40
                    3954490 M1200D250Z08S075HN07 M1200D250Z08S075HN07   63.5000 2.500 72.2050 2.843 19.05 .75 44.4500 1.750 40.0000 1.575 3.5000 .1380 8 10000 Y 1.36
                      3954503 M1200D300Z10S100HN07 M1200D300Z10S100HN07   76.2000 3.000 84.9000 3.343 25.4 1.0 55.6000 2.189 44.4500 1.750 3.5000 .1380 10 8300 Y 2.12
                        3954504 M1200D400Z06S150HN07 M1200D400Z06S150HN07   101.6000 4.000 110.2960 4.342 38.1 1.5 93.0000 3.661 44.4500 1.750 3.5000 .1380 6 6300 Y 3.74
                          3954505 M1200D400Z09S150HN07 M1200D400Z09S150HN07   101.6000 4.000 110.2960 4.342 38.1 1.5 93.0000 3.661 44.4500 1.750 3.5000 .1380 9 6300 Y 3.68
                            3954506 M1200D400Z12S150HN07 M1200D400Z12S150HN07   101.6000 4.000 110.2960 4.342 38.1 1.5 93.0000 3.661 44.4500 1.750 3.5000 .1380 12 6300 Y 3.65
                              4130534 M1200D500Z08S150HN07 M1200D500Z08S150HN07   127.0000 5.000 135.7060 5.343 38.1 1.5 92.7700 3.652 60.4520 2.380 3.5000 .1380 8 5000 Y 6.31
                                4130535 M1200D500Z12S150HN07 M1200D500Z12S150HN07   127.0000 5.000 135.7060 5.343 38.1 1.5 92.7700 3.652 60.4520 2.380 3.5000 .1380 12 5000 Y 6.52
                                  4130536 M1200D500Z16S150HN07 M1200D500Z16S150HN07   127.0000 5.000 135.7060 5.343 38.1 1.5 92.7700 3.652 60.4520 2.380 3.5000 .1380 16 5000 Y 6.63
                                    List price:
                                    Discount: %
                                    Your price::
                                    Replacement This item is not available
                                    Replacement Product This item may be available through a distributor
                                    Qty
                                    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                    You are about to create a duplicate . Do you want to proceed?
                                    You are about to delete Do you want to proceed?
                                    What would you like to rename your to?
                                    Please enter a valid name
                                    Please enter a name for the duplicate
                                    Please enter a valid name
                                    You are about to add to your My Solutions page. Do you want to proceed?
                                    Please enter a valid name
                                    Send a copy of

                                    Please enter a valid Email
                                    Please enter a valid name

                                    We have found the following CAD Drawings

                                    Select the files you are looking for and download them all at once

                                    You should be logged to see your dashboard information
                                    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                    item(s) successfully added to the cart
                                    View Cart