Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

eBore™

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (43)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (43)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (43)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (43)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (43)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (43)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (43)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (43)
  • M Stainless Steel (43)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (43)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (43)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (43)
  • K Cast Iron (39)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (39)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (39)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (39)
  • N Non-Ferrous Materials (39)
    • N1
      Wrought Aluminum
      (39)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (39)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (39)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (39)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (39)
    • N6
      Carbon, Graphite Composites, CFRP
      (39)
    • N7
      MMC's
      (39)
  • S High-Temp Alloys (43)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (43)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (43)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (43)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (43)
  • H Hardened Materials (39)
    • H1
      Hardened Materials 44-48 HRC
      (39)
    • H2
      Hardened Materials 48-55 HRC
      (39)
    • H3
      Hardened Materials 56-60 HRC
      (39)
    • H4
      Hardened Materials >60 HRC
      (39)
Applications
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (71)
  • Blind Hole Finishing Blind Hole Finishing (71)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (71)
  • Through Hole Finishing Through Hole Finishing (71)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (39)
  • Lightly Interrupted Cut (43)
  • Smooth Cut (43)
  • Varying Depth of Cut (43)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (12)
  • 91.0 (8)
  • 92.0 (23)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • E-BORE Boring Bar (21)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (17)
  • 2.0 (17)
  • 3.0 (5)
  • 4.0 (17)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (32)
  • 0.004 in (44)
  • 0.008 in (39)
  • 0.016 in (39)
  • 0.031 in (39)
  • 0.047 in (10)
  • 0.063 in (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (32)
  • 0.1 mm (44)
  • 0.2 mm (39)
  • 0.4 mm (39)
  • 0.8 mm (39)
  • 1.201 mm (10)
  • 1.6 mm (3)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (23)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (23)
Corner Chamfer Min to Corner Chamfer Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HCK10 (39)
  • HK1500 (32)
  • HK35 (36)
  • HT2 (39)
  • HTX (39)
  • HWK15 (39)
  • K10M (36)
  • K10P (36)
  • K20K (36)
  • K313 (39)
  • K68 (39)
  • KB1630 (39)
  • KBH20 (39)
  • KC5010 (39)
  • KC5025 (39)
  • KC5410 (39)
  • KC720 (39)
  • KC730 (39)
  • KC732 (39)
  • KC8050 (39)
  • KC810 (39)
  • KC850 (39)
  • KC9025 (39)
  • KC910 (39)
  • KC9105 (39)
  • KC9110 (39)
  • KC9125 (39)
  • KC9225 (39)
  • KC9240 (39)
  • KC9240NEW (39)
  • KC9315 (39)
  • KC9320 (39)
  • KC9325 (39)
  • KC935 (39)
  • KCD25 (39)
  • KCK05 (39)
  • KCK15 (39)
  • KCK15B (39)
  • KCK20 (39)
  • KCK20B (39)
  • KCM15 (39)
  • KCM15B (39)
  • KCM25 (39)
  • KCM25B (39)
  • KCM35 (39)
  • KCP05 (39)
  • KCP10 (39)
  • KCP10B (39)
  • KCP25 (39)
  • KCP25B (39)
  • KCP25C (39)
  • KCP30 (39)
  • KCS10 (39)
  • KCS10B (39)
  • KCU10 (43)
  • KCU25 (39)
  • KT315 (39)
  • KT325 (39)
  • KU10T (39)
  • KU30T (39)
  • PB170 (36)
  • PB250 (36)
  • PD100 (39)
  • PD50 (36)
  • THM (39)
  • THM-X (39)
  • TN10P (39)
  • TN10U (39)
  • TN15M (39)
  • TN2000 (39)
  • TN20K (39)
  • TN20P (39)
  • TN30M (39)
  • TN5015 (39)
  • TN5020 (39)
  • TN5105 (39)
  • TN5120 (39)
  • TN7010 (39)
  • TN7015 (39)
  • TN7025 (39)
  • TN7035 (39)
  • TN7105 (39)
  • TN7110 (39)
  • TN7115 (39)
  • TN7125 (39)
  • TN7135 (39)
  • TN8025 (39)
  • TTR (39)
  • WK05CT (39)
  • WK15CT (39)
  • WK20CT (39)
  • WM15CT (39)
  • WM25CT (39)
  • WP15CT (39)
  • WP25CT (39)
  • WS10PT (39)
  • WU05PT (39)
  • WU10HT (39)
  • WU10PT (39)
  • WU25PT (39)
Hand Of Tool
Hand Of Tool
  • R (21)
Wiper Insert
Wiper Insert
  • N (22)
  • Y (17)
F Dimension
F Dimension
  • 0.151 mm (1)
  • 2.825 mm (2)
  • 3.825 mm (1)
  • 4.75 mm (1)
  • 4.775 mm (3)
  • 5.75 mm (2)
  • 5.775 mm (1)
  • 6.75 mm (2)
  • 6.775 mm (2)
  • 7.325 mm (1)
  • 7.75 mm (1)
  • 7.775 mm (2)
  • 9.775 mm (1)
  • 12.275 mm (1)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.006 in (1)
  • 0.111 in (2)
  • 0.151 in (1)
  • 0.187 in (1)
  • 0.188 in (3)
  • 0.226 in (2)
  • 0.227 in (1)
  • 0.266 in (2)
  • 0.267 in (2)
  • 0.289 in (1)
  • 0.305 in (1)
  • 0.306 in (2)
  • 0.385 in (1)
  • 0.483 in (1)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 2.0 mm (1)
  • 6.0 mm (2)
  • 8.0 mm (2)
  • 10.0 mm (4)
  • 12.0 mm (3)
  • 14.0 mm (4)
  • 15.0 mm (1)
  • 16.0 mm (3)
  • 19.5 mm (1)
  • 20.0 mm (1)
  • 22.5 mm (1)
  • 24.5 mm (1)
  • 25.0 mm (1)
  • 25.5 mm (1)
  • 29.0 mm (2)
  • 36.0 mm (2)
  • 40.0 mm (1)
  • 43.0 mm (1)
  • 52.0 mm (1)
  • 53.0 mm (1)
  • 65.0 mm (2)
  • 68.0 mm (1)
  • 76.0 mm (1)
  • 82.0 mm (1)
  • 100.0 mm (1)
  • 125.0 mm (1)
  • 200.0 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.079 in (1)
  • 0.237 in (2)
  • 0.315 in (2)
  • 0.394 in (4)
  • 0.473 in (3)
  • 0.551 in (4)
  • 0.591 in (1)
  • 0.63 in (3)
  • 0.768 in (1)
  • 0.787 in (1)
  • 0.886 in (1)
  • 0.965 in (1)
  • 0.984 in (1)
  • 1.004 in (1)
  • 1.143 in (2)
  • 1.417 in (2)
  • 1.575 in (1)
  • 1.693 in (1)
  • 2.047 in (1)
  • 2.087 in (1)
  • 2.559 in (2)
  • 2.677 in (1)
  • 2.992 in (1)
  • 3.228 in (1)
  • 3.938 in (1)
  • 4.921 in (1)
  • 7.875 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.315 in (2)
  • 0.394 in (2)
  • 0.473 in (4)
  • 0.551 in (3)
  • 0.63 in (4)
  • 0.787 in (4)
  • 0.906 in (1)
  • 0.984 in (1)
  • 1.024 in (1)
  • 1.181 in (2)
  • 1.457 in (2)
  • 1.614 in (1)
  • 1.732 in (1)
  • 2.087 in (1)
  • 2.126 in (1)
  • 2.283 in (1)
  • 2.598 in (2)
  • 3.031 in (1)
  • 3.269 in (1)
  • 4.016 in (1)
  • 4.055 in (1)
  • 5.118 in (1)
  • 5.984 in (1)
  • 8.071 in (2)
  • 40.158 in (2)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 8.0 mm (2)
  • 10.0 mm (2)
  • 12.0 mm (4)
  • 14.0 mm (3)
  • 16.0 mm (4)
  • 20.0 mm (4)
  • 23.0 mm (1)
  • 25.0 mm (1)
  • 26.0 mm (1)
  • 30.0 mm (2)
  • 37.0 mm (2)
  • 41.0 mm (1)
  • 44.0 mm (1)
  • 53.0 mm (1)
  • 54.0 mm (1)
  • 58.0 mm (1)
  • 66.0 mm (2)
  • 77.0 mm (1)
  • 83.0 mm (1)
  • 102.0 mm (1)
  • 103.0 mm (1)
  • 130.0 mm (1)
  • 152.0 mm (1)
  • 205.0 mm (2)
  • 1020.0 mm (2)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (21)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (21)
Maximum Bore Depth
Maximum Bore Depth
  • 0.787 in (1)
  • 0.906 in (1)
  • 1.102 in (1)
  • 1.104 in (1)
  • 1.181 in (1)
  • 1.298 in (1)
  • 1.338 in (1)
  • 1.574 in (1)
  • 1.693 in (1)
  • 1.695 in (1)
  • 1.907 in (1)
  • 2.165 in (1)
  • 2.277 in (1)
  • 2.757 in (2)
  • 2.953 in (2)
  • 3.543 in (2)
  • 3.938 in (1)
  • 4.724 in (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 20.0 mm (1)
  • 23.0 mm (1)
  • 28.0 mm (1)
  • 28.05 mm (1)
  • 30.0 mm (1)
  • 32.975 mm (1)
  • 33.975 mm (1)
  • 39.975 mm (1)
  • 43.0 mm (1)
  • 43.051 mm (1)
  • 48.426 mm (1)
  • 55.0 mm (1)
  • 57.825 mm (1)
  • 70.0 mm (2)
  • 75.0 mm (2)
  • 90.0 mm (2)
  • 100.0 mm (1)
  • 120.0 mm (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (21)
Front-End
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (39)
  • W-TRIGON 80 (4)
  • X-TRIGON 82 (1)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.157 in (2)
  • 0.197 in (2)
  • 0.237 in (4)
  • 0.276 in (3)
  • 0.315 in (4)
  • 0.394 in (4)
  • 0.492 in (1)
  • 0.591 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 4.0 mm (2)
  • 5.0 mm (2)
  • 6.0 mm (4)
  • 7.0 mm (3)
  • 8.0 mm (4)
  • 10.0 mm (4)
  • 12.5 mm (1)
  • 15.0 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 0.576 in (1)
  • 0.63 in (3)
  • 1.161 in (1)
  • 1.772 in (1)
  • 1.891 in (1)
  • 2.677 in (1)
  • 2.757 in (4)
  • 2.835 in (2)
  • 2.992 in (2)
  • 3.228 in (1)
  • 3.307 in (1)
  • 3.346 in (4)
  • 3.386 in (3)
  • 3.543 in (1)
  • 3.701 in (1)
  • 3.938 in (1)
  • 4.016 in (2)
  • 4.094 in (2)
  • 4.331 in (4)
  • 4.488 in (1)
  • 4.724 in (1)
  • 5.118 in (2)
  • 5.236 in (1)
  • 5.433 in (2)
  • 5.827 in (1)
  • 6.299 in (1)
Gage Length
Gage Length
  • 110 mm (4)
  • 70 mm (4)
  • 85 mm (4)
  • 16 mm (3)
  • 86 mm (3)
  • 102 mm (2)
  • 104 mm (2)
  • 130 mm (2)
  • 138 mm (2)
  • 72 mm (2)
  • 76 mm (2)
  • 100 mm (1)
  • 114 mm (1)
  • 120 mm (1)
  • 133 mm (1)
  • 148 mm (1)
  • 160 mm (1)
  • 45 mm (1)
  • 48 mm (1)
  • 68 mm (1)
  • 82 mm (1)
  • 84 mm (1)
  • 90 mm (1)
  • 94 mm (1)
  • 14.601 mm (1)
  • 29.5 mm (1)
Insert Geometry
Shape
Shape
  • X-TRIGON 82 (1)
Insert IC Size
Insert IC Size
  • 3.975 mm (1)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.156 in (1)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 3.45 mm (1)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.136 in (1)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Tool Material
Cutting Tool Material
  • B H (39)
  • B L (39)
  • C N (32)
  • D P (39)
  • H T (39)
  • H W (39)
Tolerance Class
Tolerance Class
  • G (1)
Back-End
System Size
System Size
  • HSK63A (10)
  • KM32TS (4)
  • KM40TS (2)
  • KM50TS (5)
  • KM63TS (2)
  • KM80TS (5)
Back-End Diameter
Back-End Diameter
  • 16.0 mm (21)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.63 in (21)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

eBore™ Digital Display
(2 Products)
  • Reaming: Blind HoleReaming: Blind Hole
  • Reaming: Through & Cross HolesReaming: Through & Cross Holes
  • Reaming: Blind & CrossReaming: Blind & Cross
  • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number
6655307 FBDD0001IN FBDD0001IN
    List price:
    $570,49 /each.
    Your price:
    Qty
    6655306 FBDD0001M FBDD0001M
      List price:
      $570,49 /each.
      Your price:
      Qty
      List price:
      Discount: %
      Your price:
      Replacement This item is no longer available
      Replacement Product Please contact customer service for assistance
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      eBore™ Universal • Balancing Weight
      (1 Products)
      • Reaming: Blind HoleReaming: Blind Hole
      • Reaming: Through & Cross HolesReaming: Through & Cross Holes
      • Reaming: Blind & CrossReaming: Blind & Cross
      • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number
      6655232 BW536005 BW536005
        List price:
        $45,64 /each.
        Your price:
        Qty
        List price:
        Discount: %
        Your price:
        Replacement This item is no longer available
        Replacement Product Please contact customer service for assistance
        Qty

        Sold in pkg. of

        ORIGINAL PRODUCT

        eBore™ Universal • Boring Bar • Steel
        (12 Products)
        • Reaming: Blind HoleReaming: Blind Hole
        • Reaming: Through & Cross HolesReaming: Through & Cross Holes
        • Reaming: Blind & CrossReaming: Blind & Cross
        • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth
        6655202 BB0622WBGX02 BB0622WBGX02 6.0000 .2362 8.0000 .3150 16.0 .6299 44.9930 1.771 19.9930 .7871
          List price:
          $342,30 /each.
          Your price:
          Qty
          6655204 BB1025CC06 BB1025CC06 10.0000 .3937 12.0000 .4720 16.0 .6299 47.9920 1.889 22.9920 .9052
            List price:
            $342,30 /each.
            Your price:
            Qty
            6655206 BB1230CC06 BB1230CC06 12.0000 .4724 14.0000 .5512 16.0 .6299 52.9850 2.086 28.0480 1.104
              List price:
              $342,30 /each.
              Your price:
              Qty
              6655208 BB1435CC06 BB1435CC06 14.0000 .5511 16.0000 .6299 16.0 .6299 57.9850 2.282 33.9850 1.338
                List price:
                $342,30 /each.
                Your price:
                Qty
                6655209 BB1450CC06 BB1450CC06 14.0000 .5511 16.0000 .6299 16.0 .6299 72.9850 2.873 48.4230 1.906
                  List price:
                  $342,30 /each.
                  Your price:
                  Qty
                  6655210 BB1560CC06 BB1560CC06 15.0000 .5906 20.0000 .7874 16.0 .6299 82.9920 3.267 57.8270 2.276
                    List price:
                    $342,30 /each.
                    Your price:
                    Qty
                    List price:
                    Discount: %
                    Your price:
                    Replacement This item is no longer available
                    Replacement Product Please contact customer service for assistance
                    Qty

                    Sold in pkg. of

                    ORIGINAL PRODUCT

                    • Reaming: Blind HoleReaming: Blind Hole
                    • Reaming: Blind & CrossReaming: Blind & Cross
                    • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                    • Reaming: Through & Cross HolesReaming: Through & Cross Holes
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth
                    6655214 BB1055CC06 BB1055CC06 10.0000 .3937 12.0000 .4724 16.0 .6299 77.9920 3.070 54.9920 2.165
                      List price:
                      $570,49 /each.
                      Your price:
                      Qty
                      6655215 BB1075CC06 BB1075CC06 10.0000 .3937 12.0000 .4724 16.0 .6299 97.9920 3.857 74.9920 2.952
                        List price:
                        $570,49 /each.
                        Your price:
                        Qty
                        6655216 BB1290CC06 BB1290CC06 12.0000 .4724 14.0000 .5511 16.0 .6299 112.9920 4.448 89.9920 3.543
                          List price:
                          $570,49 /each.
                          Your price:
                          Qty
                          6655218 BB14100CC06 BB14100CC06 14.0000 .5512 16.0000 .6299 16.0 .6299 122.9920 4.842 99.9920 3.936
                            List price:
                            $627,54 /each.
                            Your price:
                            Qty
                            6655217 BB1475CC06 BB1475CC06 14.0000 .5512 16.0000 .6299 16.0 .6299 97.9920 3.857 74.9910 2.952
                              List price:
                              $570,49 /each.
                              Your price:
                              Qty
                              6655220 BB16120CC06 BB16120CC06 16.0000 .6299 20.0000 .7874 16.0 .6299 142.9920 5.629 119.9920 4.724
                                List price:
                                $798,69 /each.
                                Your price:
                                Qty
                                List price:
                                Discount: %
                                Your price:
                                Replacement This item is no longer available
                                Replacement Product Please contact customer service for assistance
                                Qty

                                Sold in pkg. of

                                ORIGINAL PRODUCT

                                • Reaming: Blind HoleReaming: Blind Hole
                                • Reaming: Through & Cross HolesReaming: Through & Cross Holes
                                • Reaming: Blind & CrossReaming: Blind & Cross
                                • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                View Products
                                SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth
                                6655221 BB0632WBGX02 BB0632WBGX02 6.0000 .2363 8.0000 .3150 16.0 .6299 54.9930 2.165 29.9930 1.180
                                  List price:
                                  $342,30 /each.
                                  Your price:
                                  Qty