successfully added to cart
View Cart

Notifications

Mark all as read

M200™ IC10 • Double-Sided Round Inserts

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Applications
  • Face Milling Face Milling (30)
  • Pocket Pocket (30)
  • Pocket Milling Pocket Milling (30)
  • Profile Milling Profile Milling (30)
  • Shoulder Ball Nose Shoulder Ball Nose (30)
  • Shoulder Milling Shoulder Milling (30)
  • Shoulder Roughing Shoulder Roughing (30)
  • Slot Milling Slot Milling (30)
  • Slot Square End Slot Square End (30)
Workpiece Material
  • P Steel (52)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (48)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (52)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (52)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (52)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (52)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (52)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (52)
  • M Stainless Steel (52)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (52)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (52)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (52)
  • K Cast Iron (42)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (42)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (42)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (42)
  • N Non-Ferrous Materials (35)
    • N1
      Wrought Aluminum
      (35)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (35)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (35)
  • S High-Temp Alloys (49)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (45)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (45)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (45)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (49)
  • H Hardened Materials (39)
    • H1
      Hardened Materials 44-48 HRC
      (39)
Maximum Cutting Diameter
  • 0.984 (5)
  • 1.0 (4)
  • 1.102 (1)
  • 1.25 (4)
  • 1.26 (4)
  • 1.378 (1)
  • 1.5 (3)
  • 1.575 (2)
  • 1.654 (1)
  • 1.969 (2)
  • 2.0 (2)
  • 2.047 (1)
to
Maximum Cutting Diameter
  • 25.0 (5)
  • 25.4 (4)
  • 28.0 (1)
  • 31.75 (4)
  • 32.0 (4)
  • 35.0 (1)
  • 38.1 (3)
  • 40.0 (2)
  • 42.0 (1)
  • 50.0 (2)
  • 50.8 (2)
  • 52.0 (1)
to
Cutting Diameter
  • 15.0 (5)
  • 15.4 (4)
  • 18.0 (1)
  • 21.75 (4)
  • 22.0 (4)
  • 25.0 (1)
  • 28.1 (3)
  • 30.0 (2)
  • 32.0 (1)
  • 40.0 (2)
  • 40.8 (2)
  • 42.0 (1)
to
Cutting Diameter
  • 0.591 (5)
  • 0.606 (4)
  • 0.709 (1)
  • 0.856 (4)
  • 0.866 (4)
  • 0.984 (1)
  • 1.106 (3)
  • 1.181 (2)
  • 1.26 (1)
  • 1.575 (2)
  • 1.606 (2)
  • 1.654 (1)
to
Cutting Length
  • 0.195 (16)
  • 0.196 (1)
  • 0.2 (13)
to
Cutting Length
  • 4.96 (17)
  • 5.0 (13)
to
Reach
  • 31.75 (1)
  • 32.0 (5)
  • 38.1 (6)
  • 40.0 (7)
  • 50.8 (2)
to
Reach
  • 1.25 (1)
  • 1.26 (5)
  • 1.5 (6)
  • 1.575 (7)
  • 2.0 (2)
to
Tool Cutting Edge Angle
  • 90.0 (30)
to
Connection Style
  • A-Socket Head Cap Screw (9)
  • Screw-On Connection (8)
  • Straight-Cylindrical (9)
  • Weldon (4)
Cutting Edges Per Insert
  • 0.0 (2)
  • 2.0 (52)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 5.0 (52)
  • -4999.5 (2)
to
Corner Radius
  • 0.1969 (52)
  • -4999.5 (2)
to
Application
Grade Of Cutting Tool
  • WK15CM (31)
  • WN25PM (31)
  • WP20CM (33)
  • WP25PM (34)
  • WP35CM (34)
  • WP40PM (32)
  • WS30PM (32)
  • WS40PM (34)
  • WU35PM (33)
Hand Of Tool
  • R (30)
Maximum Ramp Angle
  • 0.31 (2)
  • 0.32 (3)
  • 0.37 (2)
  • 0.38 (1)
  • 0.39 (1)
  • 0.4 (1)
  • 0.41 (1)
  • 0.45 (1)
  • 0.49 (8)
  • 0.55 (1)
  • 0.6 (9)
to
Wiper Insert
  • N (22)
Front-End
Insert Shape
  • R-ROUND (54)
Center Cutting
Insert Geometry
Shape
  • R-ROUND (24)
Insert IC Size
  • 0.3937 (22)
to
Insert IC Size
  • 10.0 (22)
to
Chip Breaker CBMD
  • ALP (1)
  • MH (7)
  • ML (5)
  • MM (9)
Cutting Tool Material
  • H W (24)
Tolerance Class
  • G (10)
  • P (12)
Back-End
Connection Type
  • CYLINDRICAL (13)
  • SCREW-ON (8)
  • SHELL MILL (9)
Back-End Diameter
  • 0.5 (2)
  • 0.63 (2)
  • 0.75 (2)
  • 0.827 (2)
  • 0.866 (3)
  • 0.984 (4)
  • 1.0 (3)
  • 1.142 (6)
  • 1.25 (2)
  • 1.26 (4)
to
Back-End Diameter
  • 12.7 (2)
  • 16.0 (2)
  • 19.05 (2)
  • 21.0 (2)
  • 22.0 (3)
  • 25.0 (4)
  • 25.4 (3)
  • 29.0 (6)
  • 31.7 (2)
  • 32.0 (4)
to
other
Grade
  • WK15CM (1)
  • WN25PM (1)
  • WP20CM (3)
  • WP25PM (4)
  • WP35CM (4)
  • WP40PM (2)
  • WS30PM (2)
  • WS40PM (4)
  • WU35PM (3)
Platform
  • M200 Series (49)
Tool Unit
  • I (33)
  • M (45)
Display Configurable Products
  • false (54)
Over All Length [L]
  • 39.88 (2)
  • 40.0 (4)
  • 50.0 (1)
  • 50.8 (2)
  • 89.0 (1)
  • 101.0 (1)
  • 108.71 (2)
  • 150.0 (2)
  • 152.4 (1)
  • 200.0 (3)
  • 203.2 (1)
  • 228.6 (1)
  • 250.0 (1)
to
Over All Length [L]
  • 1.57 (2)
  • 1.575 (4)
  • 1.969 (1)
  • 2.0 (2)
  • 3.504 (1)
  • 3.976 (1)
  • 4.28 (2)
  • 5.906 (2)
  • 6.0 (1)
  • 7.874 (3)
  • 8.0 (1)
  • 9.0 (1)
  • 9.843 (1)
to
Head Length [L2]
  • 31.75 (1)
  • 32.0 (5)
  • 38.1 (6)
  • 40.0 (7)
  • 50.8 (2)
to
Head Length [L2]
  • 1.25 (1)
  • 1.26 (5)
  • 1.5 (6)
  • 1.575 (7)
  • 2.0 (2)
to
Number of Inserts
  • 3.0 (15)
  • 4.0 (6)
  • 5.0 (4)
  • 6.0 (5)
to
Insert Hand
  • N (22)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Copy Mills • M200™ Series

IC10 • Inserts • RN.J10…
(5 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Number of Indexes [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
5274455 RNGJ10T3M0EML RNGJ10T3M0EML WP35CM 8 10.0000 .3937 3.9310 .1548 0.0380 .0015
    List price:
    $2.80 /each.
    Your price::
    Qty

    Sold in pkg. of 10

    5274456 RNGJ10T3M0EML RNGJ10T3M0EML WP25PM 8 10.0000 .3937 3.9310 .1548 0.0380 .0015
      List price:
      $15.18 /each.
      Your price::
      Qty

      Sold in pkg. of 10

      5274457 RNGJ10T3M0EML RNGJ10T3M0EML WU35PM 8 10.0000 .3937 3.9310 .1548 0.0380 .0015
        List price:
        $15.18 /each.
        Your price::
        Qty

        Sold in pkg. of 5

        5520352 RNGJ10T3M0EML RNGJ10T3M0EML WS30PM 8 10.0000 .3937 3.9310 .1548 0.0380 .0015
          List price:
          $17.00 /each.
          Your price::
          Qty

          Sold in pkg. of 5

          6383656 RNGJ10T3M0EML RNGJ10T3M0EML WS40PM 8 10.0000 .3937 3.9310 .1548 0.0380 .0015
            List price:
            $17.00 /each.
            Your price::
            Qty

            Sold in pkg. of 10

            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor
            Qty

            Sold in pkg. of

            ORIGINAL PRODUCT

            Copy Mills • M200™ Series

            IC10 • Screw-On End Mills
            (4 Products)
            • Shank - Screw-OnShank - Screw-On
            • 3D Profiling3D Profiling
            • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
            • Slotting: Square EndSlotting: Square End
            • Face MillingFace Milling
            • PocketingPocketing
            • Milling - Through CoolantMilling - Through Coolant
            View Products
            SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
            5210274 M200D32Z04M16RN10 M200D32Z04M16RN10 32.0000 1.260 22.0000 .8660 29.0 1.142 17.0000 .6700 M16 40.0000 1.575 23.9500 .9430 4.9600 .1950 4 0.490 48300 Y 0.18
              List price:
              $478.85 /each.
              Your price::
              Qty
              5210275 M200D35Z05M16RN10 M200D35Z05M16RN10 35.0000 1.378 25.0000 .9840 29.0 1.142 17.0000 .6700 M16 40.0000 1.575 23.9500 .9430 4.9600 .1950 5 0.450 46200 Y 0.20
                List price:
                $523.67 /each.
                Your price::
                Qty
                5210276 M200D42Z06M16RN10 M200D42Z06M16RN10 42.0000 1.654 32.0000 1.260 29.0 1.142 17.0000 .6700 M16 40.0000 1.575 24.7500 .9740 4.9600 .1960 6 0.380 42200 Y 0.24
                  List price:
                  $590.91 /each.
                  Your price::
                  Qty
                  5210273 M200D25Z03M12RN10 M200D25Z03M12RN10 25.0000 .9840 15.0000 .5910 21.0 .827 12.5000 .4900 M12 32.0000 1.260 16.9500 .6670 4.9600 .1950 3 0.600 54700 Y 0.08
                    List price:
                    $427.15 /each.
                    Your price::
                    Qty
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    Qty

                    Sold in pkg. of

                    ORIGINAL PRODUCT

                    Copy Mills • M200™ Series

                    IC10 • Weldon® Shanks
                    (2 Products)
                    • Shank - Cylindrical  Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
                    • 3D Profiling3D Profiling
                    • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                    • Slotting: Square EndSlotting: Square End
                    • Face MillingFace Milling
                    • PocketingPocketing
                    • Milling - Through CoolantMilling - Through Coolant
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [LBX] Body Length Maximum [LBX] Body Length Maximum [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                    5283437 M200D125Z03W125RN10 M200D125Z03W125RN10 31.7500 1.250 21.7500 .8560 31.7 1.25 108.7100 4.280 50.8000 2.000 5.0000 .2000 3 0.490 48500 Y 1.20
                      List price:
                      $348.36 /each.
                      Your price::
                      Qty
                      5283436 M200D100Z03W100RN10 M200D100Z03W100RN10 25.4000 1.000 15.4000 .6060 25.4 1.0 108.7100 4.280 50.8000 2.000 5.0000 .2000 3 0.600 54200 Y 0.76
                        List price:
                        $324.62 /each.
                        Your price::
                        Qty
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor
                        Qty

                        Sold in pkg. of

                        ORIGINAL PRODUCT

                        Copy Mills • M200™ Series

                        IC10 • Screw-On End Mills
                        (4 Products)
                        • Shank - Screw-OnShank - Screw-On
                        • 3D Profiling3D Profiling
                        • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                        • Slotting: Square EndSlotting: Square End
                        • Face MillingFace Milling
                        • PocketingPocketing
                        • Milling - Through CoolantMilling - Through Coolant
                        View Products
                        SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                        5283435 M200D150Z05M16RN10 M200D150Z05M16RN10 38.1000 1.500 28.1000 1.106 29.0 1.142 17.0000 .6700 M16 38.1000 1.500 23.9500 .9430 5.0000 .2000 5 0.370 44300 Y 0.45
                          List price:
                          $384.86 /each.
                          Your price::
                          Qty
                          5283434 M200D125Z04M16RN10 M200D125Z04M16RN10 31.7500 1.250 21.7500 .8560 29.0 1.142 17.0000 .6700 M16 38.1000 1.500 23.9500 .9430 5.0000 .2000 4 0.490 48500 Y 0.38
                            List price:
                            $369.97 /each.
                            Your price::
                            Qty
                            5283433 M200D125Z03M16RN10 M200D125Z03M16RN10 31.7500 1.250 21.7500 .8560 29.0 1.142 17.0000 .6700 M16 38.1000 1.500 23.9500 .9430 5.0000 .2000 3 0.490 48500 Y 0.38
                              List price:
                              $359.12 /each.
                              Your price::
                              Qty
                              5283432 M200D100Z03M12RN10 M200D100Z03M12RN10 25.4000 1.000 15.4000 .6060 21.0 .827 12.5000 .4900 M12 31.7500 1.250 16.9500 .6670 5.0000 .2000 3 0.600 54200 Y 0.16
                                List price:
                                $347.26 /each.
                                Your price::
                                Qty
                                List price:
                                Discount: %
                                Your price::
                                Replacement This item is not available
                                Replacement Product This item may be available through a distributor
                                Qty

                                Sold in pkg. of

                                ORIGINAL PRODUCT

                                Copy Mills • M200™ Series

                                Cylindrical End Mills
                                (3 Products)
                                • Shank - Cylindrical  PlainShank - Cylindrical Plain
                                • 3D Profiling3D Profiling
                                • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                • Slotting: Square EndSlotting: Square End
                                • Face MillingFace Milling
                                • PocketingPocketing
                                • Milling - Through CoolantMilling - Through Coolant
                                View Products
                                SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [LBX] Body Length Maximum [LBX] Body Length Maximum [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                                5283439 M200D100Z03C100RN10L800 M200D100Z03C100RN10L800 25.4000 1.000 15.4000 .6060 25.4 1.0 203.2000 8.000 38.1000 1.500 5.0000 .2000 3 0.600 54200 Y 1.58
                                  List price:
                                  $343.95 /each.
                                  Your price::
                                  Qty
                                  5283480 M200D125Z03C125RN10L900 M200D125Z03C125RN10L900 31.7500 1.250 21.7500 .8560 31.7 1.25 228.6000 9.000 38.1000 1.500 5.0000 .2000 3 0.490 48500 Y 2.85
                                    List price:
                                    $357.92 /each.
                                    Your price::
                                    Qty
                                    5283438 M200D100Z03C100RN10L600 M200D100Z03C100RN10L600 25.4000 1.000 15.4000 .6060 25.4 1.0 152.4000 6.000 38.1000 1.500 5.0000 .2000 3 0.600 54200 Y 1.15
                                      List price:
                                      $331.84 /each.
                                      Your price::
                                      Qty
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty

                                      Sold in pkg. of

                                      ORIGINAL PRODUCT

                                      Copy Mills • M200™ Series

                                      Shell Mills • Inch
                                      (4 Products)
                                      • Milling - Side and FaceMilling - Side and Face
                                      • 3D Profiling3D Profiling
                                      • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                      • Slotting: Square EndSlotting: Square End
                                      • Face MillingFace Milling
                                      • PocketingPocketing
                                      • Milling - Through CoolantMilling - Through Coolant
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                                      5283484 M200D200Z06S075RN10 M200D200Z06S075RN10 50.8000 2.000 40.8000 1.606 19.05 .75 42.0000 1.654 50.8000 2.000 5.0000 .2000 6 0.320 38300 Y 1.02
                                        List price:
                                        $430.75 /each.
                                        Your price::
                                        Qty
                                        5283481 M200D150Z03S050RN10 M200D150Z03S050RN10 38.1000 1.500 28.1000 1.106 12.7 .5 33.0200 1.300 39.8800 1.570 5.0000 .2000 3 0.410 44300 Y 0.46
                                          List price:
                                          $339.39 /each.
                                          Your price::
                                          Qty
                                          5283482 M200D150Z05S050RN10 M200D150Z05S050RN10 38.1000 1.500 28.1000 1.106 12.7 .5 33.0200 1.300 39.8800 1.570 5.0000 .2000 5 0.370 44300 Y 0.43
                                            List price:
                                            $370.43 /each.
                                            Your price::
                                            Qty
                                            5283483 M200D200Z04S075RN10 M200D200Z04S075RN10 50.8000 2.000 40.8000 1.606 19.05 .75 42.0000 1.654 50.8000 2.000 5.0000 .2000 4 0.310 38300 Y 1.04
                                              List price:
                                              $408.74 /each.
                                              Your price::
                                              Qty
                                              List price:
                                              Discount: %
                                              Your price::
                                              Replacement This item is not available
                                              Replacement Product This item may be available through a distributor
                                              Qty

                                              Sold in pkg. of

                                              ORIGINAL PRODUCT

                                              Copy Mills • M200™ Series

                                              IC10 • Shell Mills
                                              (5 Products)
                                              • Milling - Side and FaceMilling - Side and Face
                                              • 3D Profiling3D Profiling
                                              • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                              • Slotting: Square EndSlotting: Square End
                                              • Face MillingFace Milling
                                              • PocketingPocketing
                                              • Milling - Through CoolantMilling - Through Coolant
                                              View Products
                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                                              5210307 M200D50Z05RN10 M200D50Z05RN10 50.0000 1.969 40.0000 1.575 22.0 .866 42.0000 1.654 40.0000 1.575 4.9600 .1950 5 0.320 38600 Y 0.32
                                                List price:
                                                $540.85 /each.
                                                Your price::
                                                Qty
                                                5210309 M200D52Z06RN10 M200D52Z06RN10 52.0000 2.047 42.0000 1.654 22.0 .866 49.0000 1.929 50.0000 1.969 4.9600 .1950 6 0.310 37900 Y 0.52
                                                  List price:
                                                  $575.96 /each.
                                                  Your price::
                                                  Qty
                                                  5210308 M200D50Z06RN10 M200D50Z06RN10 50.0000 1.969 40.0000 1.575 22.0 .866 42.0000 1.654 40.0000 1.575 4.9600 .1950 6 0.320 38600 Y 0.32
                                                    List price:
                                                    $575.96 /each.
                                                    Your price::
                                                    Qty
                                                    5210306 M200D40Z06RN10 M200D40Z06RN10 40.0000 1.575 30.0000 1.181 16.0 .63 38.0000 1.496 40.0000 1.575 4.9600 .1950 6 0.400 43200 Y 0.24
                                                      List price:
                                                      $497.15 /each.
                                                      Your price::
                                                      Qty
                                                      5210305 M200D40Z04RN10 M200D40Z04RN10 40.0000 1.575 30.0000 1.181 16.0 .63 38.0000 1.496 40.0000 1.575 4.9600 .1950 4 0.390 43200 Y 0.23
                                                        List price:
                                                        $467.49 /each.
                                                        Your price::
                                                        Qty
                                                        List price:
                                                        Discount: %
                                                        Your price::
                                                        Replacement This item is not available
                                                        Replacement Product This item may be available through a distributor
                                                        Qty

                                                        Sold in pkg. of

                                                        ORIGINAL PRODUCT

                                                        Copy Mills • M200™ Series

                                                        IC10 • Cylindrical End Mills
                                                        (6 Products)
                                                        • Shank - Cylindrical  PlainShank - Cylindrical Plain
                                                        • 3D Profiling3D Profiling
                                                        • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                                        • Slotting: Square EndSlotting: Square End
                                                        • Face MillingFace Milling
                                                        • PocketingPocketing
                                                        • Milling - Through CoolantMilling - Through Coolant
                                                        View Products
                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [LBX] Body Length Maximum [LBX] Body Length Maximum [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                                                        5210279 M200D25Z03A25RN10L150 M200D25Z03A25RN10L150 25.0000 .9840 15.0000 .5910 25.0 .984 150.0000 5.906 32.0000 1.260 4.9600 .1950 3 0.600 54700 Y 0.50
                                                          List price:
                                                          $383.23 /each.
                                                          Your price::
                                                          Qty
                                                          5210300 M200D25Z03A25RN10L200 M200D25Z03A25RN10L200 25.0000 .9840 15.0000 .5910 25.0 .984 200.0000 7.874 32.0000 1.260 4.9600 .1950 3 0.600 54700 Y 0.69
                                                            List price:
                                                            $397.27 /each.
                                                            Your price::
                                                            Qty
                                                            5210302 M200D28Z03A25RN10L200 M200D28Z03A25RN10L200 28.0000 1.102 18.0000 .7090 25.0 .984 200.0000 7.874 40.0000 1.575 4.9600 .1950 3 0.550 51600 Y 0.70
                                                              List price:
                                                              $404.14 /each.
                                                              Your price::
                                                              Qty
                                                              5210304 M200D32Z03A32RN10L200 M200D32Z03A32RN10L200 32.0000 1.260 22.0000 .8660 32.0 1.26 200.0000 7.874 40.0000 1.575 4.9600 .1950 3 0.490 48300 Y 1.14
                                                                List price:
                                                                $470.48 /each.
                                                                Your price::
                                                                Qty
                                                                5210301 M200D25Z03A32RN10L250 M200D25Z03A32RN10L250 25.0000 .9840 15.0000 .5910 32.0 1.26 250.0000 9.843 32.0000 1.260 4.9600 .1950 3 0.600 54700 Y 1.42
                                                                  List price:
                                                                  $412.22 /each.
                                                                  Your price::
                                                                  Qty
                                                                  5210303 M200D32Z04A32RN10L150 M200D32Z04A32RN10L150 32.0000 1.260 22.0000 .8660 32.0 1.26 150.0000 5.906 40.0000 1.575 4.9600 .1950 4 0.490 48300 Y 0.83
                                                                    List price:
                                                                    $456.83 /each.
                                                                    Your price::
                                                                    Qty
                                                                    List price:
                                                                    Discount: %
                                                                    Your price::
                                                                    Replacement This item is not available
                                                                    Replacement Product This item may be available through a distributor
                                                                    Qty

                                                                    Sold in pkg. of

                                                                    ORIGINAL PRODUCT

                                                                    Copy Mills • M200™ Series

                                                                    IC10 • Weldon® Shanks
                                                                    (2 Products)
                                                                    • Shank - Cylindrical  Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
                                                                    • 3D Profiling3D Profiling
                                                                    • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                                                    • Slotting: Square EndSlotting: Square End
                                                                    • Face MillingFace Milling
                                                                    • PocketingPocketing
                                                                    • Milling - Through CoolantMilling - Through Coolant
                                                                    View Products
                                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [LBX] Body Length Maximum [LBX] Body Length Maximum [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                                                                    5210278 M200D32Z04B32RN10 M200D32Z04B32RN10 32.0000 1.260 22.0000 .8660 32.0 1.26 101.0000 3.976 40.0000 1.575 4.9600 .1950 4 0.490 48300 Y 0.52
                                                                      List price:
                                                                      $446.58 /each.
                                                                      Your price::
                                                                      Qty
                                                                      5210277 M200D25Z03B25RN10