Are you new to WIDIA? Create an account and get started.
Create AccountAlready have an account? Sign in.
Sign InAre you new to WIDIA? Create an account and get started.
Create AccountAlready have an account? Sign in.
Sign In| SAP Material Number | 6921237 |
| ISO Catalog Number | M1600U600Z16W4S200ON04 |
| ANSI Catalog Number | M1600U600Z16W4S200ON04 |
| [D1] Effective Cutting Diameter | 152.4000 mm |
| [D1] Effective Cutting Diameter | 6.000 in |
| [D1MAX] Maximum Cutting Diameter | 158.8465 mm |
| [D1MAX] Maximum Cutting Diameter | 6.253 in |
| [D] Adapter / Shank / Bore Diameter | 50.8 mm |
| [D] Adapter / Shank / Bore Diameter | 2.0 in |
| [D6] Hub Diameter | 123.8250 mm |
| [D6] Hub Diameter | 4.875 in |
| [L] Overall Length | 62.9920 mm |
| [L] Overall Length | 2.480 in |
| [AP1MAX] 1st Maximum Cutting Depth | 2.1000 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .0827 in |
| Number of Inserts | 16 |
| Coolant Supply | N |
| Weight Pounds | 13.02 |
Face Milling| Obróbka lekka | Obróbka średnia | Obróbka ciężka | ||||
| Grupa materiałowa | Geometria | Gatunek | Geometria | Gatunek | Geometria | Gatunek |
| P1–P2 | .S..MM | WU10PM | .S..MM | WU10PM | .S..MM | WU20PM |
| P3–P4 | .S..MM | WU10PM | .S..MM | WU20PM | .S..MM | WU20PM |
| P5–P6 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| M1–M2 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| M3 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| K1–K2 | .S..MM | WK15CM | .S..MM | WK15CM | .S..MM | WU20PM |
| K3 | .S..MM | WU20PM | .S..MM | WU10PM | .S..MM | WK15CM |
| N1–N2 | .S..MM | WU10PM | .S..MM | WU10PM | .S..MM | WU20PM |
| N3 | .S..MM | WU10PM | .S..MM | WU10PM | .S..MM | WU20PM |
| S1–S2 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| S3 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| S4 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| H1 | .S..MM | WU10PM | .S..MM | WU20PM | .S..MM | WU20PM |
| Geometria płytki | Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae) | Geometria płytki | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .S..MM | 0,17 | 0,61 | 1,23 | 0,12 | 0,44 | 0,88 | 0,09 | 0,33 | 0,66 | 0,08 | 0,29 | 0,57 | 0,07 | 0,26 | 0,52 | .S..MM |
| Obróbka lekka | Obróbka średnia | Obróbka ciężka |
| Geometria płytki | Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae) | Geometria płytki | ||||||||||||||
| 5% | 10% | 20% | 30% | 40-100% | ||||||||||||
| .S..MM | .007 | .023 | .046 | .005 | .016 | .033 | .004 | .012 | .024 | .003 | .011 | .021 | .003 | .010 | .019 | .S..MM |
| Obróbka lekka | Obróbka średnia | Obróbka ciężka |
| Grupa materiałowa | WK15CM | WU10PM | WU20PM | THM-F | |||||||||
| P | 1 | — | — | — | — | — | — | 330 | 290 | 270 | — | — | — |
| 2 | — | — | — | — | — | — | 275 | 250 | 200 | — | — | — | |
| 3 | — | — | — | — | — | — | 255 | 220 | 175 | — | — | — | |
| 4 | — | — | — | 245 | 200 | 170 | 225 | 190 | 150 | — | — | — | |
| 5 | — | — | — | — | — | — | 185 | 175 | 150 | — | — | — | |
| 6 | — | — | — | — | — | — | 165 | 130 | 100 | — | — | — | |
| M | 1 | — | — | — | — | — | — | 205 | 180 | 165 | — | — | — |
| 2 | — | — | — | — | — | — | 185 | 160 | 130 | — | — | — | |
| 3 | — | — | — | — | — | — | 140 | 120 | 95 | — | — | — | |
| K | 1 | 420 | 385 | 340 | 295 | 265 | 240 | 250 | 220 | 185 | 190 | 170 | 150 |
| 2 | 335 | 295 | 275 | 230 | 205 | 190 | 200 | 180 | 150 | — | — | — | |
| 3 | 280 | 250 | 230 | 195 | 175 | 160 | 180 | 150 | 120 | — | — | — | |
| N | 1 | — | — | — | 640 | 570 | 525 | 550 | 470 | 400 | 795 | 695 | 600 |
| 2 | — | — | — | 640 | 570 | 525 | 550 | 470 | 400 | 795 | 695 | 600 | |
| 3 | — | — | — | 580 | 535 | 490 | 400 | 350 | 300 | — | — | — | |
| S | 1 | — | — | — | — | — | — | 40 | 35 | 25 | — | — | — |
| 2 | — | — | — | — | — | — | 40 | 35 | 25 | — | — | — | |
| 3 | — | — | — | — | — | — | 50 | 40 | 25 | — | — | — | |
| 4 | — | — | — | — | — | — | 70 | 50 | 35 | — | — | — | |
| H | 1 | — | — | — | 160 | 130 | 90 | 110 | 80 | 70 | — | — | — |
| Grupa materiałowa | WK15CM | WU10PM | WU20PM | THM-F | |||||||||
| P | 1 | — | — | — | — | — | — | 1080 | 950 | 890 | — | — | — |
| 2 | — | — | — | — | — | — | 900 | 820 | 660 | — | — | — | |
| 3 | — | — | — | — | — | — | 840 | 720 | 570 | — | — | — | |
| 4 | — | — | — | 800 | 660 | 560 | 740 | 620 | 490 | — | — | — | |
| 5 | — | — | — | — | — | — | 610 | 570 | 490 | — | — | — | |
| 6 | — | — | — | — | — | — | 540 | 430 | 330 | — | — | — | |
| M | 1 | — | — | — | — | — | — | 670 | 590 | 540 | — | — | — |
| 2 | — | — | — | — | — | — | 610 | 520 | 430 | — | — | — | |
| 3 | — | — | — | — | — | — | 460 | 390 | 310 | — | — | — | |
| K | 1 | 1380 | 1260 | 1120 | 970 | 870 | 790 | 820 | 720 | 610 | 620 | 560 | 490 |
| 2 | 1100 | 970 | 900 | 750 | 670 | 620 | 660 | 590 | 490 | — | — | — | |
| 3 | 920 | 820 | 750 | 640 | 570 | 520 | 590 | 490 | 390 | — | — | — | |
| N | 1 | — | — | — | 2100 | 1870 | 1720 | 1800 | 1540 | 1310 | 2610 | 2280 | 1970 |
| 2 | — | — | — | 2100 | 1870 | 1720 | 1800 | 1540 | 1310 | 2610 | 2280 | 1970 | |
| 3 | — | — | — | 1900 | 1760 | 1610 | 1310 | 1150 | 980 | — | — | — | |
| S | 1 | — | — | — | — | — | — | 130 | 110 | 80 | — | — | — |
| 2 | — | — | — | — | — | — | 130 | 110 | 80 | — | — | — | |
| 3 | — | — | — | — | — | — | 160 | 130 | 80 | — | — | — | |
| 4 | — | — | — | — | — | — | 230 | 160 | 110 | — | — | — | |
| H | 1 | — | — | — | 520 | 430 | 300 | 360 | 260 | 230 | — | — | — |
ISO Catalog Number
ANSI Catalog Number
to find similar products.. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
| Name | SAP Material Number | ISO Catalog Number |
|---|
