Downloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 3778942 |
| ISO Catalog ID | ONGX060512ANSNMM |
| ANSI Catalog ID | ONGX060512ANSNMM |
| Grade | WU20PM |
| Cutting Edges per Insert | 16 |
| [D] Insert IC Size | 16.88 mm |
| [D] Insert IC Size | .6646 in |
| [L10] Insert Cutting Edge Length | 6.874 mm |
| [L10] Insert Cutting Edge Length | .2706 in |
| [S] Insert Thickness | 5.473 mm |
| [S] Insert Thickness | .2155 in |
| [BS] Corner Facet Length | 0.765 mm |
| [BS] Corner Facet Length | .0301 in |
| [Rε] Corner Radius | 1.2 mm |
| [Rε] Corner Radius | .0468 in |
| Average Chip Thickness [HM] | 0.055 mm |
| Average Chip Thickness [HM] | .0022 in |
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
| Light | General | Heavy | ||||
| Material | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .S..MM | WP35CM | .S..MM | WP35CM | .S..MM | WU20PM |
| P3–P4 | .S..MM | WP35CM | .S..MM | WP35CM | .S..MM | WU20PM |
| P5–P6 | .S..MM | WP35CM | .S..MM | WP35CM | .S..MM | WP35CM |
| M1–M2 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| M3 | .S..MM | WP35CM | .S..MM | WP35CM | .S..MM | WP35CM |
| K1–K2 | .S..MM | WK15CM | .S..MM | WK15CM | .S..MM | WU20PM |
| K3 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WK15CM |
| N1–N2 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| N3 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| S1–S2 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| S3 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| S4 | .S..MM | WP35CM | .S..MM | WU20PM | .S..MM | WU20PM |
| H1 | .S..MM | WU20PM | – | – | – | – |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .S..MM | 0,26 | 0,85 | 1,42 | 0,19 | 0,62 | 1,01 | 0,14 | 0,46 | 0,75 | 0,12 | 0,40 | 0,66 | 0,11 | 0,37 | 0,60 | .S..MM |
| Light | General | Heavy |
| Light | General | Heavy |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40-100% | ||||||||||||
| .S..MM | .010 | .034 | .056 | .007 | .024 | .040 | .005 | .018 | .030 | .005 | .016 | .026 | .004 | .014 | .024 | .S..MM |
| Material Group | WP35CM | WK15CM | WU20PM | |||||||
| P | 1 | 455 | 395 | 370 | — | — | — | 330 | 290 | 270 |
| 2 | 280 | 255 | 230 | — | — | — | 275 | 250 | 200 | |
| 3 | 255 | 230 | 205 | — | — | — | 255 | 220 | 175 | |
| 4 | 190 | 175 | 160 | — | — | — | 225 | 190 | 150 | |
| 5 | 260 | 230 | 210 | — | — | — | 185 | 175 | 150 | |
| 6 | 160 | 135 | 110 | — | — | — | 165 | 130 | 100 | |
| M | 1 | 205 | 185 | 155 | — | — | — | 205 | 180 | 165 |
| 2 | 185 | 160 | 140 | — | — | — | 185 | 160 | 130 | |
| 3 | 145 | 130 | 115 | — | — | — | 140 | 120 | 95 | |
| K | 1 | 295 | 265 | 240 | 420 | 385 | 340 | 250 | 220 | 185 |
| 2 | 235 | 210 | 190 | 335 | 295 | 275 | 200 | 180 | 150 | |
| 3 | 195 | 175 | 160 | 280 | 250 | 230 | 180 | 150 | 120 | |
| N | 1 | — | — | — | — | — | — | 550 | 470 | 400 |
| 2 | — | — | — | — | — | — | 550 | 470 | 400 | |
| 3 | — | — | — | — | — | — | 400 | 350 | 300 | |
| S | 1 | — | — | — | — | — | — | 40 | 35 | 25 |
| 2 | — | — | — | — | — | — | 40 | 35 | 25 | |
| 3 | — | — | — | — | — | — | 50 | 40 | 25 | |
| 4 | — | — | — | — | — | — | 70 | 50 | 35 | |
| H | 1 | — | — | — | — | — | — | 110 | 80 | 70 |
| Material Group | WP35CM | WK15CM | WU20PM | |||||||
| P | 1 | 1490 | 1300 | 1210 | — | — | — | 1080 | 950 | 890 |
| 2 | 920 | 840 | 750 | — | — | — | 900 | 820 | 660 | |
| 3 | 840 | 750 | 670 | — | — | — | 840 | 720 | 570 | |
| 4 | 620 | 570 | 520 | — | — | — | 740 | 620 | 490 | |
| 5 | 850 | 750 | 690 | — | — | — | 610 | 570 | 490 | |
| 6 | 520 | 440 | — | — | — | — | 540 | 430 | 330 | |
| M | 1 | 670 | 610 | 510 | — | — | — | 670 | 590 | 540 |
| 2 | 610 | 520 | 460 | — | — | — | 610 | 520 | 430 | |
| 3 | 480 | 430 | 380 | — | — | — | 460 | 390 | 310 | |
| K | 1 | 970 | 870 | 790 | 1380 | 1260 | 1120 | 820 | 720 | 610 |
| 2 | 770 | 690 | 620 | 1100 | 970 | 900 | 660 | 590 | 490 | |
| 3 | 640 | 570 | 520 | 920 | 820 | 750 | 590 | 490 | 390 | |
| N | 1 | — | — | — | — | — | — | 1800 | 1540 | 1310 |
| 2 | — | — | — | — | — | — | 1800 | 1540 | 1310 | |
| 3 | — | — | — | — | — | — | 1310 | 1150 | 980 | |
| S | 1 | — | — | — | — | — | — | 130 | 110 | 80 |
| 2 | — | — | — | — | — | — | 130 | 110 | 80 | |
| 3 | — | — | — | — | — | — | 160 | 130 | 80 | |
| 4 | — | — | — | — | — | — | 230 | 160 | 110 | |
| H | 1 | — | — | — | — | — | — | 360 | 260 | 230 |
I have read and accepted the Terms & Conditions of use
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?