successfully added to cart
View Cart

Notifications

Mark all as read
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (7)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (7)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (7)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (7)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (7)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (7)
  • M Stainless Steel (7)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (7)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (7)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (7)
  • K Cast Iron (7)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (7)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (7)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (7)
  • N Non-Ferrous Materials (7)
    • N1
      Wrought Aluminum
      (7)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (7)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (7)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (7)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (7)
    • N6
      Carbon, Graphite Composites, CFRP
      (7)
    • N7
      MMC's
      (7)
  • S High-Temp Alloys (7)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (7)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (7)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (7)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (7)
  • H Hardened Materials (7)
    • H1
      Hardened Materials 44-48 HRC
      (7)
    • H2
      Hardened Materials 48-55 HRC
      (7)
    • H3
      Hardened Materials 56-60 HRC
      (4)
    • H4
      Hardened Materials >60 HRC
      (4)
Applications
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (4)
  • Face Grooving Face Grooving (4)
  • Facing Facing (4)
  • Grooving Grooving (6)
  • ID Grooving ID Grooving (1)
  • ID Thread Turning ID Thread Turning (2)
  • Multiple Direction Cutting Multiple Direction Cutting (4)
  • OD Thread Turning OD Thread Turning (6)
  • Plunge Turning Plunge Turning (4)
  • Profiling Profiling (4)
  • TRN Boring TRN Boring (3)
  • Threading Threading (6)
  • Turning Turning (4)
Type of Thread
Type of Thread
  • 60 (7)
  • ACME (4)
  • API (4)
  • API RD (4)
  • BSW (4)
  • BUTTRESS (7)
  • M (5)
  • NPT (4)
  • STUB ACME (4)
  • UN (7)
  • UNJ (4)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (7)
  • Lightly Interrupted Cut (7)
  • Smooth Cut (7)
  • Varying Depth of Cut (7)
Connection Style
Connection Style
  • KM (4)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (7)
  • 2.0 (7)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (4)
  • 0.003 in (7)
  • 0.004 in (7)
  • 0.005 in (4)
  • 0.006 in (4)
  • 0.007 in (5)
  • 0.008 in (7)
  • 0.01 in (5)
  • 0.011 in (4)
  • 0.012 in (4)
  • 0.014 in (4)
  • 0.016 in (4)
  • 0.017 in (4)
  • 0.019 in (4)
  • 0.02 in (7)
  • 0.023 in (4)
  • 0.03 in (3)
  • 0.031 in (7)
  • 0.035 in (4)
  • 0.039 in (7)
  • 0.047 in (7)
  • 0.049 in (7)
  • 0.06 in (7)
  • 0.062 in (4)
  • 0.063 in (7)
  • 0.069 in (7)
  • 0.078 in (4)
  • 0.079 in (4)
  • 0.089 in (4)
  • 0.095 in (4)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (4)
  • 0.076 mm (7)
  • 0.1 mm (7)
  • 0.125 mm (4)
  • 0.151 mm (4)
  • 0.176 mm (5)
  • 0.2 mm (7)
  • 0.225 mm (4)
  • 0.25 mm (5)
  • 0.275 mm (4)
  • 0.301 mm (4)
  • 0.325 mm (4)
  • 0.351 mm (4)
  • 0.4 mm (4)
  • 0.426 mm (4)
  • 0.45 mm (4)
  • 0.476 mm (2)
  • 0.5 mm (7)
  • 0.576 mm (4)
  • 0.75 mm (3)
  • 0.775 mm (7)
  • 0.9 mm (4)
  • 1.0 mm (7)
  • 1.201 mm (7)
  • 1.25 mm (7)
  • 1.5 mm (7)
  • 1.576 mm (4)
  • 1.6 mm (7)
  • 1.75 mm (7)
  • 1.975 mm (4)
  • 2.0 mm (4)
  • 2.25 mm (4)
  • 2.401 mm (4)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (7)
  • K313 (7)
  • K420 (7)
  • K4H (6)
  • K68 (7)
  • KB1345 (4)
  • KB1630 (4)
  • KB5625 (4)
  • KBH20 (2)
  • KC250 (7)
  • KC5010 (7)
  • KC5025 (7)
  • KC5410 (7)
  • KC710 (7)
  • KC720 (7)
  • KC722 (7)
  • KC730 (7)
  • KC732 (4)
  • KC810 (7)
  • KC850 (7)
  • KC910 (6)
  • KC9110 (7)
  • KC9120 (4)
  • KC9320 (7)
  • KC935 (7)
  • KC950 (7)
  • KCK20 (6)
  • KCK20B (7)
  • KCP10B (7)
  • KCP25B (7)
  • KCU10 (7)
  • KCU25 (7)
  • KD050 (2)
  • KD081 (4)
  • KD100 (4)
  • KD120 (4)
  • KD1425 (4)
  • KT175 (7)
  • KT315 (7)
  • KU10T (7)
  • KU25T (7)
  • KU30T (7)
  • KY3000 (4)
  • THM (7)
  • TN10P (6)
  • TN6010 (7)
  • TN6025 (7)
  • TN7110 (7)
  • WU10HT (2)
  • WU10PT (2)
  • WU25PT (2)
Hand Of Tool
Hand Of Tool
  • L (2)
  • R (2)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (4)
  • 41.301 mm (2)
  • 44.0 mm (3)
  • 47.6 mm (2)
  • 56.625 mm (2)
  • 88.9 mm (4)
  • 139.701 mm (2)
  • 174.601 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (4)
  • 1.627 in (2)
  • 1.732 in (3)
  • 1.874 in (2)
  • 2.229 in (2)
  • 3.5 in (4)
  • 5.5 in (2)
  • 6.875 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (4)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (4)
Maximum Bore Depth
Maximum Bore Depth
  • 1.379 in (3)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 35.0 mm (3)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Cutting Width
Cutting Width
  • 0.02 in (3)
  • 0.031 in (3)
  • 0.035 in (3)
  • 0.039 in (7)
  • 0.041 in (3)
  • 0.047 in (7)
  • 0.055 in (3)
  • 0.058 in (3)
  • 0.06 in (7)
  • 0.061 in (1)
  • 0.062 in (7)
  • 0.067 in (3)
  • 0.069 in (7)
  • 0.073 in (4)
  • 0.077 in (3)
  • 0.078 in (4)
  • 0.079 in (7)
  • 0.088 in (7)
  • 0.089 in (7)
  • 0.095 in (7)
  • 0.097 in (4)
  • 0.098 in (7)
  • 0.105 in (4)
  • 0.108 in (7)
  • 0.11 in (4)
  • 0.119 in (7)
  • 0.122 in (4)
  • 0.125 in (7)
  • 0.126 in (7)
  • 0.128 in (7)
  • 0.129 in (3)
  • 0.131 in (2)
  • 0.138 in (7)
  • 0.143 in (4)
  • 0.147 in (1)
  • 0.15 in (3)
  • 0.152 in (3)
  • 0.156 in (4)
  • 0.157 in (4)
  • 0.167 in (4)
  • 0.169 in (4)
  • 0.177 in (4)
  • 0.178 in (4)
  • 0.181 in (2)
  • 0.185 in (4)
  • 0.188 in (4)
  • 0.189 in (4)
  • 0.192 in (2)
  • 0.193 in (2)
  • 0.195 in (4)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (3)
  • 0.775 mm (3)
  • 0.8 mm (3)
  • 0.9 mm (3)
  • 1.0 mm (7)
  • 1.05 mm (3)
  • 1.201 mm (7)
  • 1.401 mm (3)
  • 1.475 mm (3)
  • 1.5 mm (7)
  • 1.55 mm (1)
  • 1.576 mm (7)
  • 1.701 mm (3)
  • 1.75 mm (7)
  • 1.826 mm (4)
  • 1.951 mm (3)
  • 1.975 mm (4)
  • 2.0 mm (7)
  • 2.2 mm (7)
  • 2.225 mm (7)
  • 2.25 mm (7)
  • 2.401 mm (7)
  • 2.475 mm (4)
  • 2.5 mm (7)
  • 2.676 mm (4)
  • 2.75 mm (7)
  • 2.801 mm (4)
  • 3.0 mm (7)
  • 3.1 mm (4)
  • 3.176 mm (7)
  • 3.2 mm (7)
  • 3.25 mm (7)
  • 3.276 mm (3)
  • 3.325 mm (2)
  • 3.5 mm (7)
  • 3.6 mm (4)
  • 3.725 mm (1)
  • 3.801 mm (3)
  • 3.85 mm (3)
  • 3.95 mm (4)
  • 3.975 mm (2)
  • 4.0 mm (4)
  • 4.25 mm (4)
  • 4.3 mm (4)
  • 4.5 mm (4)
  • 4.525 mm (4)
  • 4.601 mm (2)
  • 4.7 mm (4)
  • 4.775 mm (4)
  • 4.801 mm (4)
  • 4.875 mm (2)
  • 4.9 mm (2)
  • 4.95 mm (4)
Cutting Width Min to Cutting Width Max
Insert Size
Insert Size
  • 2 (3)
  • 3 (4)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.138 in (1)
  • 0.21 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 3.5 mm (1)
  • 5.325 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (4)
  • B L (4)
  • C N (4)
  • D P (4)
  • H T (7)
  • H W (7)
Back-End
Connection Type
Connection Type
  • TAPER SHANK (4)
System Size
System Size
  • KM32 (3)
  • KM32TS (1)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
1019412 KM32TSNEL3 KM32TSNEL3 35.0000 1.378 22.0000 .8661 44.0000 1.732 NG3R    
    List price:
    $225.63 /each.
    Your price::
    Qty
    1019406 KM32TSNER2 KM32TSNER2 35.0000 1.378 22.0000 .8660 44.0000 1.732 NG2L 0.17 0.37
      List price:
      $251.88 /each.
      Your price::
      Qty
      1019410 KM32TSNER3 KM32TSNER3 35.0000 1.378 22.0000 .8660 44.0000 1.732 NG3L 0.17 0.38
        List price:
        $261.95 /each.
        Your price::
        Qty
        List price:
        Discount: %
        Your price::
        Replacement This item is no longer available
        Replacement Product Please contact customer service for assistance
        Qty

        Sold in pkg. of

        ORIGINAL PRODUCT

        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert
        1019409 KM32TSNSL2 KM32TSNSL2 35.0000 1.378 22.0000 .8661 NG2L
          List price:
          $259.34 /each.
          Your price::
          Qty
          1019413 KM32TSNSL3 KM32TSNSL3 40.0000 1.574 22.0000 .8661 NG3L
            List price:
            $259.34 /each.
            Your price::
            Qty
            1019407 KM32TSNSR2 KM32TSNSR2 35.0000 1.378 22.0000 .8661 NG2R
              List price:
              $259.34 /each.
              Your price::
              Qty
              1019411 KM32TSNSR3 KM32TSNSR3 40.0000 1.574 22.0000 .8660 NG3R
                List price:
                $259.34 /each.
                Your price::
                Qty
                List price:
                Discount: %
                Your price::
                Replacement This item is no longer available
                Replacement Product Please contact customer service for assistance
                Qty

                Sold in pkg. of

                product-image
                Please adjust the following properties from

                ISO Catalog Number

                ANSI Catalog Number

                to find similar products.
                You are about to create a duplicate . Do you want to proceed?
                You are about to delete Do you want to proceed?
                What would you like to rename your to?
                Please enter a valid name
                Please enter a name for the duplicate
                Please enter a valid name
                You are about to add to your My Solutions page. Do you want to proceed?
                Please enter a valid name
                Send a copy of

                Please enter a valid Email
                Please enter a valid name

                The following CAD files are available

                Please select a file to download

                You should be logged to see your dashboard information
                Session expired due to inactivity, please login again
                The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                item(s) successfully added to the cart
                View Cart