External Machining • Tool Holders

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (390)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (390)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (390)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (390)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (390)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (390)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (390)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (390)
  • M Stainless Steel (367)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (367)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (364)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (364)
  • K Cast Iron (403)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (403)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (403)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (401)
  • N Non-Ferrous Materials (375)
    • N1
      Wrought Aluminum (375)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (375)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (234)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (374)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (238)
    • N6
      Carbon, Graphite Composites, CFRP (236)
    • N7
      MMC's (217)
  • S High-Temp Alloys (390)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (390)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (390)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (390)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (368)
  • H Hardened Materials (301)
    • H1
      Hardened Materials 44-48 HRC (301)
    • H2
      Hardened Materials 48-55 HRC (301)
    • H3
      Hardened Materials 56-60 HRC (291)
    • H4
      Hardened Materials >60 HRC (291)
Select All Star
  • DE (41)
  • IN (8)
  • SG (7)
  • US (11)
Applications
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Facing Facing (284)
  • Multiple Direction Cutting Multiple Direction Cutting (317)
  • Profiling Profiling (293)
  • TRN Boring TRN Boring (1)
  • Turning Turning (399)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (372)
  • Lightly Interrupted Cut (390)
  • Smooth Cut (398)
  • Varying Depth of Cut (397)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (47)
  • 50.0 (2)
  • 60.0 (2)
  • 62.5 (8)
  • 63.0 (6)
  • 72.5 (8)
  • 75.0 (60)
  • 90.0 (55)
  • 93.0 (97)
  • 95.0 (106)
  • 107.5 (18)
  • 117.5 (5)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (7)
  • Toolholder (407)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (220)
  • 2.0 (212)
  • 3.0 (53)
  • 4.0 (256)
  • 6.0 (53)
  • 8.0 (142)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 2.5 in (2)
  • 2.757 in (3)
  • 3.15 in (10)
  • 3.5 in (5)
  • 3.938 in (22)
  • 4.0 in (2)
  • 4.5 in (18)
  • 4.912 in (1)
  • 4.921 in (72)
  • 5.0 in (6)
  • 5.513 in (1)
  • 5.896 in (1)
  • 5.906 in (107)
  • 6.0 in (66)
  • 6.694 in (74)
  • 6.732 in (1)
  • 7.875 in (3)
  • 9.843 in (17)
  • 11.811 in (3)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 63.5 mm (2)
  • 70.0 mm (3)
  • 80.0 mm (10)
  • 88.9 mm (5)
  • 100.0 mm (22)
  • 101.601 mm (2)
  • 114.301 mm (18)
  • 124.75 mm (1)
  • 125.0 mm (72)
  • 127.0 mm (6)
  • 140.0 mm (1)
  • 149.75 mm (1)
  • 150.0 mm (107)
  • 152.4 mm (66)
  • 170.0 mm (74)
  • 171.0 mm (1)
  • 200.0 mm (3)
  • 250.0 mm (17)
  • 300.0 mm (3)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.004 in (134)
  • 0.008 in (179)
  • 0.014 in (23)
  • 0.016 in (307)
  • 0.024 in (18)
  • 0.031 in (375)
  • 0.047 in (348)
  • 0.063 in (227)
  • 0.094 in (1)
  • 0.095 in (73)
  • 0.119 in (3)
  • 0.157 in (3)
  • 0.197 in (2)
  • 0.237 in (2)
  • 0.25 in (11)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (134)
  • 0.2 mm (179)
  • 0.351 mm (23)
  • 0.4 mm (307)
  • 0.601 mm (18)
  • 0.8 mm (375)
  • 1.201 mm (348)
  • 1.6 mm (227)
  • 2.375 mm (1)
  • 2.401 mm (73)
  • 3.0 mm (3)
  • 4.0 mm (3)
  • 5.0 mm (2)
  • 6.0 mm (2)
  • 6.351 mm (11)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CG5 (1)
  • CG55 (2)
  • CG6 (1)
  • CM1 (1)
  • CW2015 (209)
  • CW3020 (11)
  • CW5025 (215)
  • HCK10 (53)
  • HK1500 (213)
  • HK15M (2)
  • HK35 (56)
  • HWK10 (3)
  • HWK15 (57)
  • K420 (21)
  • PB100 (76)
  • PB170 (54)
  • PB250 (81)
  • PB300 (46)
  • PD100 (54)
  • PD50 (40)
  • RC3503 (2)
  • SP0A00 (31)
  • SP0B00 (4)
  • SP0G00 (7)
  • SP0NTA (6)
  • SP0PW3 (5)
  • SP3900 (4)
  • SPN3W1 (10)
  • SPN4W2 (15)
  • SPTM00 (2)
  • THM (233)
  • THM-F (6)
  • THM-X (148)
  • THMF-X (85)
  • TN1000 (5)
  • TN10P (325)
  • TN10U (262)
  • TN15M (315)
  • TN15U (235)
  • TN2000 (241)
  • TN20K (337)
  • TN20P (353)
  • TN30M (327)
  • TN30P (209)
  • TN35 (6)
  • TN4000 (219)
  • TN5015 (292)
  • TN5020 (296)
  • TN5105 (216)
  • TN5120 (319)
  • TN6010 (147)
  • TN6025 (167)
  • TN7005 (166)
  • TN7010 (336)
  • TN7015 (340)
  • TN7025 (336)
  • TN7035 (306)
  • TN7105 (210)
  • TN7110 (303)
  • TN7115 (328)
  • TN7125 (324)
  • TN7135 (306)
  • TN8025 (293)
  • TTI15 (152)
  • TTM (20)
  • TTM08 (6)
  • TTM09 (104)
  • TTMS (2)
  • TTR (152)
  • TTR-X (17)
  • TTS (151)
  • TTX (158)
  • W00162 (5)
  • W00342 (61)
  • WBH10C (196)
  • WBH10P (145)
  • WBH10U (201)
  • WBH20P (203)
  • WBH25P (184)
  • WBH25U (169)
  • WBH30P (140)
  • WBK40U (85)
  • WBK45U (126)
  • WDN00U (73)
  • WDN25U (187)
  • WK05CT (321)
  • WK15CT (215)
  • WK20CT (376)
  • WM15CT (342)
  • WM25CT (358)
  • WM35CT (249)
  • WP05CT (59)
  • WP15CT (388)
  • WP20TT (38)
  • WP25CT (382)
  • WP35CT (366)
  • WS10PT (302)
  • WS25PT (305)
  • WU05PT (56)
  • WU10HT (315)
  • WU10PT (236)
  • WU20HT (5)
  • WU25PT (249)
Hand Of Tool
Hand Of Tool
  • L (154)
  • N (58)
  • R (202)
Wiper Insert
Wiper Insert
  • N (406)
  • Y (125)
F Dimension
F Dimension
  • 4.0 mm (1)
  • 6.0 mm (2)
  • 6.351 mm (2)
  • 7.0 mm (2)
  • 8.0 mm (1)
  • 9.0 mm (3)
  • 9.5 mm (1)
  • 9.525 mm (2)
  • 9.951 mm (1)
  • 10.0 mm (7)
  • 11.0 mm (2)
  • 12.0 mm (9)
  • 12.25 mm (1)
  • 12.5 mm (17)
  • 12.601 mm (1)
  • 12.625 mm (1)
  • 12.701 mm (8)
  • 13.0 mm (6)
  • 14.0 mm (1)
  • 15.0 mm (2)
  • 15.5 mm (1)
  • 15.875 mm (5)
  • 16.0 mm (10)
  • 16.5 mm (1)
  • 17.0 mm (5)
  • 17.5 mm (1)
  • 18.0 mm (1)
  • 18.5 mm (1)
  • 19.05 mm (2)
  • 19.5 mm (1)
  • 20.0 mm (19)
  • 22.0 mm (8)
  • 23.151 mm (2)
  • 25.0 mm (54)
  • 25.401 mm (17)
  • 27.0 mm (9)
  • 28.651 mm (1)
  • 31.75 mm (38)
  • 32.0 mm (99)
  • 33.551 mm (1)
  • 35.0 mm (7)
  • 38.1 mm (12)
  • 40.0 mm (30)
  • 43.0 mm (1)
  • 47.026 mm (1)
  • 50.0 mm (12)
  • 50.801 mm (5)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.157 in (1)
  • 0.237 in (2)
  • 0.25 in (2)
  • 0.276 in (2)
  • 0.315 in (1)
  • 0.354 in (3)
  • 0.374 in (1)
  • 0.375 in (2)
  • 0.392 in (1)
  • 0.394 in (7)
  • 0.433 in (2)
  • 0.473 in (9)
  • 0.482 in (1)
  • 0.492 in (17)
  • 0.496 in (1)
  • 0.497 in (1)
  • 0.5 in (8)
  • 0.512 in (6)
  • 0.551 in (1)
  • 0.591 in (2)
  • 0.61 in (1)
  • 0.625 in (5)
  • 0.63 in (10)
  • 0.65 in (1)
  • 0.669 in (5)
  • 0.69 in (1)
  • 0.709 in (1)
  • 0.728 in (1)
  • 0.75 in (2)
  • 0.768 in (1)
  • 0.787 in (19)
  • 0.866 in (8)
  • 0.911 in (2)
  • 0.984 in (54)
  • 1.0 in (17)
  • 1.063 in (9)
  • 1.129 in (1)
  • 1.25 in (38)
  • 1.26 in (99)
  • 1.321 in (1)
  • 1.379 in (7)
  • 1.5 in (12)
  • 1.575 in (30)
  • 1.693 in (1)
  • 1.851 in (1)
  • 1.969 in (12)
  • 2.0 in (5)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 13.0 mm (2)
  • 16.0 mm (3)
  • 20.0 mm (1)
  • 25.0 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.512 in (2)
  • 0.63 in (3)
  • 0.787 in (1)
  • 0.984 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (106)
  • E (55)
  • S (253)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (231)
  • DOUBLE POSITIVE (2)
  • NEGATIVE-ZERO (59)
  • NEUTRAL (ZERO) (109)
  • POSITIVE-ZERO (13)
Maximum Bore Depth
Maximum Bore Depth
  • 1.575 in (2)
  • 1.891 in (3)
  • 2.52 in (1)
  • 3.15 in (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 40.0 mm (2)
  • 48.0 mm (3)
  • 64.0 mm (1)
  • 80.0 mm (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (7)
Front-End
Clamp Style
Clamp Style
  • C (26)
  • D (148)
  • M (16)
  • N (2)
  • P (107)
  • S (115)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (115)
  • D-DIAMOND/RHOMBIC 55 (88)
  • N/K-PARALLELOGRAM 55 (2)
  • R-ROUND (26)
  • S-SQUARE 90 (73)
  • T-TRIANGLE 60 (35)
  • V-DIAMOND/RHOMBIC 35 (47)
  • W-TRIGON 80 (28)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.63 in (2)
  • 0.748 in (1)
  • 0.776 in (2)
  • 0.787 in (2)
  • 0.984 in (3)
  • 1.102 in (1)
  • 1.143 in (2)
  • 1.379 in (1)
  • 1.496 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 16.0 mm (2)
  • 19.0 mm (1)
  • 19.701 mm (2)
  • 20.0 mm (2)
  • 25.0 mm (3)
  • 28.0 mm (1)
  • 29.0 mm (2)
  • 35.0 mm (1)
  • 38.0 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (257)
  • B L (237)
  • C A (209)
  • C N (265)
  • D P (192)
  • H T (152)
  • H W (393)
Back-End
Connection Type
Connection Type
  • BORING BAR (7)
  • SQUARE SHANK (407)
Back-End Diameter
Back-End Diameter
  • 10.0 mm (2)
  • 12.0 mm (3)
  • 16.0 mm (1)
  • 20.0 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.394 in (2)
  • 0.473 in (3)
  • 0.63 in (1)
  • 0.787 in (1)
Back-End Diameter Min to Back-End Diameter Max
Shank Height
Shank Height
  • 0.315 in (1)
  • 0.375 in (2)
  • 0.394 in (4)
  • 0.473 in (10)
  • 0.5 in (6)
  • 0.625 in (2)
  • 0.63 in (22)
  • 0.75 in (19)
  • 0.787 in (71)
  • 0.984 in (103)
  • 0.985 in (1)
  • 1.0 in (45)
  • 1.25 in (19)
  • 1.26 in (75)
  • 1.5 in (6)
  • 1.575 in (20)
  • 1.969 in (1)
Shank Height Min to Shank Height Max