S-Style Clamping • For Positive Style Inserts

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (111)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (111)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (111)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (111)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (111)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (111)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (111)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (111)
  • M Stainless Steel (111)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (111)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (108)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (108)
  • K Cast Iron (111)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (111)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (111)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (111)
  • N Non-Ferrous Materials (113)
    • N1
      Wrought Aluminum
      (113)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (113)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (93)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (113)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (95)
    • N6
      Carbon, Graphite Composites, CFRP
      (93)
    • N7
      MMC's
      (95)
  • S High-Temp Alloys (111)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (111)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (111)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (111)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (105)
  • H Hardened Materials (81)
    • H1
      Hardened Materials 44-48 HRC
      (81)
    • H2
      Hardened Materials 48-55 HRC
      (81)
    • H3
      Hardened Materials 56-60 HRC
      (81)
    • H4
      Hardened Materials >60 HRC
      (81)
Select All Star
  • DE (18)
  • SG (4)
  • US (3)
Applications
Applications
  • Facing Facing (44)
  • Multiple Direction Cutting Multiple Direction Cutting (97)
  • Profiling Profiling (98)
  • TRN Boring TRN Boring (1)
  • Turning Turning (105)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (104)
  • Lightly Interrupted Cut (111)
  • Smooth Cut (111)
  • Varying Depth of Cut (111)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (6)
  • 62.5 (7)
  • 72.5 (4)
  • 75.0 (5)
  • 90.0 (17)
  • 93.0 (37)
  • 95.0 (24)
  • 107.5 (15)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (7)
  • Toolholder (108)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (88)
  • 2.0 (88)
  • 3.0 (4)
  • 4.0 (36)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.004 in (62)
  • 0.008 in (82)
  • 0.016 in (103)
  • 0.031 in (103)
  • 0.047 in (77)
  • 0.063 in (9)
  • 0.119 in (3)
  • 0.157 in (3)
  • 0.197 in (2)
  • 0.237 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (62)
  • 0.2 mm (82)
  • 0.4 mm (103)
  • 0.8 mm (103)
  • 1.201 mm (77)
  • 1.6 mm (9)
  • 3.0 mm (3)
  • 4.0 mm (3)
  • 5.0 mm (2)
  • 6.0 mm (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CG5 (1)
  • CG6 (1)
  • CM1 (1)
  • HCK10 (53)
  • HK1500 (58)
  • HK35 (56)
  • HWK10 (3)
  • HWK15 (57)
  • K420 (21)
  • PB100 (29)
  • PB170 (13)
  • PB250 (34)
  • PB300 (5)
  • PD100 (54)
  • PD50 (40)
  • SP0G00 (7)
  • SP0PW3 (5)
  • SP3900 (4)
  • SPN3W1 (10)
  • THM (105)
  • THM-X (44)
  • TN1000 (5)
  • TN10P (95)
  • TN10U (95)
  • TN15M (86)
  • TN15U (70)
  • TN2000 (66)
  • TN20K (95)
  • TN20P (95)
  • TN30M (86)
  • TN4000 (44)
  • TN5015 (74)
  • TN5020 (98)
  • TN5105 (64)
  • TN5120 (105)
  • TN6010 (52)
  • TN6025 (47)
  • TN7005 (60)
  • TN7010 (105)
  • TN7015 (105)
  • TN7025 (105)
  • TN7035 (97)
  • TN7105 (93)
  • TN7110 (102)
  • TN7115 (105)
  • TN7125 (105)
  • TN7135 (99)
  • TN8025 (73)
  • TTI15 (70)
  • TTM (10)
  • TTM09 (33)
  • TTR (69)
  • TTS (15)
  • TTX (69)
  • W00162 (5)
  • W00342 (44)
  • WBH10C (58)
  • WBH10P (73)
  • WBH10U (73)
  • WBH20P (48)
  • WBH25P (74)
  • WBH25U (55)
  • WBH30P (68)
  • WBK45U (39)
  • WDN00U (22)
  • WDN25U (78)
  • WK05CT (69)
  • WK15CT (77)
  • WK20CT (112)
  • WM15CT (93)
  • WM25CT (101)
  • WP15CT (111)
  • WP20TT (26)
  • WP25CT (113)
  • WP35CT (91)
  • WS10PT (57)
  • WS25PT (52)
  • WU05PT (56)
  • WU10HT (77)
  • WU10PT (73)
  • WU20HT (5)
  • WU25PT (86)
Hand Of Tool
Hand Of Tool
  • L (38)
  • N (23)
  • R (54)
Wiper Insert
Wiper Insert
  • N (113)
  • Y (36)
F Dimension
F Dimension
  • 4.0 mm (1)
  • 6.0 mm (1)
  • 6.351 mm (1)
  • 7.0 mm (2)
  • 8.0 mm (1)
  • 9.0 mm (3)
  • 10.0 mm (2)
  • 11.0 mm (2)
  • 12.0 mm (5)
  • 12.5 mm (6)
  • 12.701 mm (3)
  • 13.0 mm (3)
  • 14.0 mm (1)
  • 15.0 mm (2)
  • 15.875 mm (4)
  • 16.0 mm (7)
  • 16.5 mm (1)
  • 17.0 mm (2)
  • 17.5 mm (1)
  • 18.0 mm (1)
  • 18.5 mm (1)
  • 19.05 mm (2)
  • 20.0 mm (12)
  • 22.0 mm (1)
  • 25.0 mm (18)
  • 25.401 mm (4)
  • 31.75 mm (4)
  • 32.0 mm (24)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.157 in (1)
  • 0.237 in (1)
  • 0.25 in (1)
  • 0.276 in (2)
  • 0.315 in (1)
  • 0.354 in (3)
  • 0.394 in (2)
  • 0.433 in (2)
  • 0.473 in (5)
  • 0.492 in (6)
  • 0.5 in (3)
  • 0.512 in (3)
  • 0.551 in (1)
  • 0.591 in (2)
  • 0.625 in (4)
  • 0.63 in (7)
  • 0.65 in (1)
  • 0.669 in (2)
  • 0.69 in (1)
  • 0.709 in (1)
  • 0.728 in (1)
  • 0.75 in (2)
  • 0.787 in (12)
  • 0.866 in (1)
  • 0.984 in (18)
  • 1.0 in (4)
  • 1.25 in (4)
  • 1.26 in (24)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 13.0 mm (2)
  • 16.0 mm (3)
  • 20.0 mm (1)
  • 25.0 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.512 in (2)
  • 0.63 in (3)
  • 0.787 in (1)
  • 0.984 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (24)
  • E (13)
  • S (78)
Rake Angle Style
Rake Angle Style
  • DOUBLE POSITIVE (2)
  • NEGATIVE-ZERO (6)
  • NEUTRAL (ZERO) (105)
  • POSITIVE-ZERO (2)
Maximum Bore Depth
Maximum Bore Depth
  • 1.575 in (2)
  • 1.891 in (3)
  • 2.52 in (1)
  • 3.15 in (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 40.0 mm (2)
  • 48.0 mm (3)
  • 64.0 mm (1)
  • 80.0 mm (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (7)
Front-End
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (26)
  • D-DIAMOND/RHOMBIC 55 (41)
  • R-ROUND (11)
  • S-SQUARE 90 (11)
  • T-TRIANGLE 60 (4)
  • V-DIAMOND/RHOMBIC 35 (22)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.63 in (2)
  • 0.776 in (2)
  • 0.787 in (2)
  • 0.984 in (3)
  • 1.102 in (1)
  • 1.379 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 16.0 mm (2)
  • 19.701 mm (2)
  • 20.0 mm (2)
  • 25.0 mm (3)
  • 28.0 mm (1)
  • 35.0 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (81)
  • B L (82)
  • C N (15)
  • D P (83)
  • H T (70)
  • H W (113)
Back-End
Connection Type
Connection Type
  • BORING BAR (7)
  • SQUARE SHANK (108)
Back-End Diameter
Back-End Diameter
  • 10.0 mm (2)
  • 12.0 mm (3)
  • 16.0 mm (1)
  • 20.0 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.394 in (2)
  • 0.473 in (3)
  • 0.63 in (1)
  • 0.787 in (1)
Back-End Diameter Min to Back-End Diameter Max
Shank Height
Shank Height
  • 0.315 in (1)
  • 0.375 in (2)
  • 0.394 in (4)
  • 0.473 in (8)
  • 0.5 in (5)
  • 0.625 in (2)
  • 0.63 in (16)
  • 0.75 in (4)
  • 0.787 in (25)
  • 0.984 in (26)
  • 1.0 in (5)
  • 1.26 in (10)
Shank Height Min to Shank Height Max
Shank Height
Shank Height
  • 8.0 mm (1)
  • 9.525 mm (2)
  • 10.0 mm (4)
  • 12.0 mm (8)
  • 12.701 mm (5)
  • 15.875 mm (2)
  • 16.0 mm (16)
  • 19.05 mm (4)
  • 20.0 mm (25)
  • 25.0 mm (26)
  • 25.401 mm (5)
  • 32.0 mm (10)
Shank Height Min to Shank Height Max
Shank Width
Shank Width
  • 0.315 in (1)
  • 0.375 in (2)
  • 0.394 in (4)
  • 0.473 in (8)
  • 0.5 in (5)
  • 0.625 in (2)
  • 0.63 in (16)
  • 0.75 in (4)
  • 0.787 in (25)
  • 0.984 in (36)
  • 1.0 in (5)
Shank Width Min to Shank Width Max
Shank Width
Shank Width
  • 8.0 mm (1)
  • 9.525 mm (2)
  • 10.0 mm (4)
  • 12.0 mm (8)
  • 12.701 mm (5)
  • 15.875 mm (2)
  • 16.0 mm (16)
  • 19.05 mm (4)
  • 20.0 mm (25)
  • 25.0 mm (36)
  • 25.401 mm (5)
Shank Width Min to Shank Width Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

(4 Products)
  • TurningTurning
  • ProfilingProfiling
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length Inclination Angle [GAAO] Orthogonal Rake Angle Gage Insert
2951373 SVJBL123 SVJBL123 WG   19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 35.052 1.380 0.000 0.000 VB..332
    List price:
    $122.34 /each
    Your price:
    Qty
    2951374 SVJBL163 SVJBL163 WG   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 35.052 1.380 0.000 0.000 VB..332
      List price:
      $124.49 /each
      Your price:
      Qty
      2951375 SVJBR123 SVJBR123 WG   19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 35.052 1.380 0.000 0.000 VB..332
        List price:
        $122.34 /each
        Your price:
        Qty
        2951376 SVJBR163 SVJBR163 WG   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 35.052 1.380 0.000 0.000 VB..332
          List price:
          $124.49 /each
          Your price:
          Qty
          List price:
          Discount: %
          Your price:
          Replacement This item is no longer available
          Replacement Product Please contact customer service for assistance
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          (3 Products)
          • TurningTurning
          • ProfilingProfiling
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length Inclination Angle [GAAO] Orthogonal Rake Angle Gage Insert
          2951367 SDJCL102 SDJCL102 WG   15.8800 .6250 15.8800 .6250 19.0500 .7500 101.6000 4.000 15.748 .6200 0.000 0.000 DC..2151
            List price:
            $118.09 /each
            Your price:
            Qty
            2951370 SDJCR123 SDJCR123 WG   19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 22.352 .8800 0.000 0.000 DC..3252
              List price:
              $122.34 /each
              Your price:
              Qty
              2951371 SDJCR163 SDJCR163 WG   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 22.352 .8800 0.000 0.000 DC..3252
                List price:
                $124.49 /each
                Your price:
                Qty
                List price:
                Discount: %
                Your price:
                Replacement This item is no longer available
                Replacement Product Please contact customer service for assistance
                Qty

                Sold in pkg. of

                ORIGINAL PRODUCT

                SDNC 62,5°
                (7 Products)
                • TurningTurning
                • ProfilingProfiling
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert
                3879468 SDNCN0808L07 SDNCN0808L07 WG   8.0000 .3150 8.0000 .3150 4.0000 .1575 140.0000 5.511 16.0000 .6300 DC..070204
                  List price:
                  $66.73 /each
                  Your price:
                  Qty
                  3900178 SDNCN1212F11 SDNCN1212F11 WG   12.0000 .4724 12.0000 .4724 6.0000 .2362 80.0000 3.149     DC..11T308
                    List price:
                    $154.14 /each
                    Your price:
                    Qty
                    3879465 SDNCN1616H11 SDNCN1616H11 WG   16.0000 .6299 16.0000 .6299 8.0000 .3150 100.0000 3.937 22.0000 .8700 DC..11T308
                      List price:
                      $101.31 /each
                      Your price:
                      Qty
                      3879467 SDNCN2020K11 SDNCN2020K11 WG   20.0000 .7874 20.0000 .7874 10.0000 .3937 125.0000 4.921 22.0000 .8700 DC..11T308
                        List price:
                        $105.64 /each
                        Your price:
                        Qty
                        3879849 SDNCN2525M11 SDNCN2525M11 WG   25.0000 .9843 25.0000 .9843 12.5000 .4921 150.0000 5.905 24.8900 .9800 DC..11T308
                          List price:
                          $108.20 /each
                          Your price:
                          Qty
                          3879466 SDNCN2525M15 SDNCN2525M15 WG   25.0000 .9843 25.0000 .9843 12.5000 .4920 150.0000 5.905 28.0000 1.100 DC..150408
                            List price:
                            $111.39 /each
                            Your price:
                            Qty
                            List price:
                            Discount: %
                            Your price:
                            Replacement This item is no longer available
                            Replacement Product Please contact customer service for assistance
                            Qty

                            Sold in pkg. of

                            ORIGINAL PRODUCT

                            SVJB 93°
                            (8 Products)
                            • TurningTurning
                            • ProfilingProfiling
                            View Products
                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert
                            3879770 SVJBL2020K16 SVJBL2020K16 WG   20.0000 .7874 20.0000 .7874 25.0000 .9843 125.0000 4.921 35.0000 1.380 VB..160408
                              List price:
                              $129.19 /each
                              Your price:
                              Qty
                              3879774 SVJBL2525M16 SVJBL2525M16 WG   25.0000 .9843 25.0000 .9843 32.0000 1.259 150.0000 5.905 35.0000 1.380 VB..160408
                                List price:
                                $138.23 /each
                                Your price:
                                Qty
                                3879769 SVJBR1616H16 SVJBR1616H16 WG   16.0000 .6299 16.0000 .6299 20.0000 .7874 100.0000 3.937 35.0000 1.378 VB..160408
                                  List price:
                                  $133.84 /each
                                  Your price:
                                  Qty
                                  3879776 SVJBR2020K16 SVJBR2020K16 WG   20.0000 .7874 20.0000 .7874 25.0000 .9843 125.0000 4.921 35.0000 1.380 VB..160408