successfully added to cart
View Cart

Notifications

Mark all as read

Small Hole Boring Bars For Turning

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Select First Choice
  • IN (1)
  • US (44)
Applications
  • Multiple Direction Cutting Multiple Direction Cutting (169)
  • Profiling Profiling (38)
  • TRN Boring TRN Boring (181)
Workpiece Material
  • P Steel (211)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (211)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (211)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (211)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (211)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (211)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (211)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (211)
  • M Stainless Steel (211)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (211)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (211)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (211)
  • K Cast Iron (211)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (211)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (211)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (211)
  • N Non-Ferrous Materials (211)
    • N1
      Wrought Aluminum
      (211)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (211)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (207)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (140)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (115)
    • N6
      Carbon, Graphite Composites, CFRP
      (115)
    • N7
      MMC's
      (140)
  • S High-Temp Alloys (66)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (66)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (66)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (66)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (59)
  • H Hardened Materials (37)
    • H1
      Hardened Materials 44-48 HRC
      (37)
    • H2
      Hardened Materials 48-55 HRC
      (37)
    • H3
      Hardened Materials 56-60 HRC
      (37)
    • H4
      Hardened Materials >60 HRC
      (37)
Cutting Condition
  • Heavily Interrupted Cut (14)
  • Lightly Interrupted Cut (14)
  • Smooth Cut (138)
  • Varying Depth of Cut (138)
Cutting Condition Material
  • K-All (127)
  • M-All (14)
  • N-All (124)
  • P-All (14)
  • S-All (7)
Tool Cutting Edge Angle
  • 45.0 (2)
  • 60.0 (3)
  • 90.0 (45)
  • 93.0 (19)
  • 95.0 (140)
  • 97.0 (8)
to
Connection Style
  • Boring Bar Shank (215)
Cutting Edges Per Insert
  • 1.0 (140)
  • 2.0 (87)
  • 3.0 (124)
  • 4.0 (6)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.051 (78)
  • 0.102 (15)
  • 0.127 (3)
  • 0.178 (183)
  • 0.18 (186)
  • 0.2 (10)
  • 0.202 (7)
  • 0.203 (8)
  • 0.38 (186)
  • 0.381 (140)
  • 0.397 (77)
  • 0.4 (14)
  • 0.787 (25)
  • 0.79 (25)
  • 0.794 (62)
  • 0.8 (7)
to
Corner Radius
  • 0.002 (78)
  • 0.004 (15)
  • 0.005 (3)
  • 0.007 (186)
  • 0.008 (18)
  • 0.015 (186)
  • 0.0156 (47)
  • 0.031 (59)
  • 0.0312 (62)
  • 0.0313 (7)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • ALO (137)
  • C2 (59)
  • C25 (149)
  • C3 (34)
  • CBN6 (34)
  • CG5 (207)
  • CG55 (11)
  • CG6 (186)
  • CM1 (207)
  • CPD1 (59)
  • TN7 (183)
  • WBH10C (3)
  • WBH10P (3)
  • WBH10U (3)
  • WBH25P (3)
  • WBH30P (3)
  • WDN00U (3)
  • WDN10U (34)
  • WDN25U (81)
  • WK20CT (152)
  • WM15CT (7)
  • WM25CT (7)
  • WP15CT (7)
  • WP25CT (14)
Hand Of Tool
  • L (47)
  • R (168)
Minimum Axial Groove Diameter
  • 0.18 (8)
  • 0.204 (8)
  • 0.208 (9)
  • 0.218 (4)
  • 0.224 (2)
  • 0.228 (8)
  • 0.234 (11)
  • 0.244 (1)
  • 0.26 (2)
  • 0.267 (1)
  • 0.275 (11)
  • 0.278 (3)
  • 0.279 (3)
  • 0.2791 (1)
  • 0.285 (17)
  • 0.292 (4)
  • 0.296 (16)
  • 0.347 (3)
  • 0.356 (6)
  • 0.358 (15)
  • 0.36 (1)
  • 0.394 (1)
  • 0.407 (1)
  • 0.413 (3)
  • 0.42 (2)
  • 0.438 (13)
  • 0.439 (1)
  • 0.481 (2)
  • 0.492 (1)
  • 0.508 (1)
  • 0.518 (1)
  • 0.525 (2)
  • 0.538 (3)
  • 0.545 (1)
  • 0.563 (10)
  • 0.605 (1)
  • 0.606 (1)
  • 0.645 (3)
  • 0.668 (3)
  • 0.67 (1)
  • 0.673 (2)
  • 0.679 (1)
  • 0.68 (3)
  • 0.688 (1)
  • 0.72 (7)
  • 0.75 (2)
  • 0.797 (2)
  • 0.85 (7)
  • 0.969 (3)
  • 1.1 (4)
to
Minimum Axial Groove Diameter
  • 4.57 (8)
  • 5.18 (7)
  • 5.182 (1)
  • 5.28 (9)
  • 5.54 (4)
  • 5.69 (2)
  • 5.78 (1)
  • 5.79 (6)
  • 5.791 (1)
  • 5.94 (11)
  • 6.2 (1)
  • 6.6 (2)
  • 6.78 (1)
  • 6.98 (10)
  • 7.06 (3)
  • 7.08 (2)
  • 7.09 (2)
  • 7.24 (17)
  • 7.42 (4)
  • 7.52 (16)
  • 8.81 (3)
  • 9.04 (6)
  • 9.09 (15)
  • 9.16 (1)
  • 9.98 (1)
  • 10.01 (1)
  • 10.34 (1)
  • 10.49 (1)
  • 10.5 (2)
  • 10.67 (1)
  • 10.68 (1)
  • 11.13 (13)
  • 11.15 (1)
  • 12.22 (2)
  • 12.5 (1)
  • 12.9 (1)
  • 13.16 (1)
  • 13.34 (2)
  • 13.67 (3)
  • 13.84 (1)
  • 14.3 (10)
  • 15.37 (1)
  • 15.39 (1)
  • 16.38 (3)
  • 16.967 (1)
  • 16.97 (2)
  • 17.02 (1)
  • 17.09 (2)
  • 17.25 (1)
  • 17.27 (3)
  • 17.48 (1)
  • 18.29 (7)
  • 19.05 (2)
  • 20.24 (2)
  • 21.59 (7)
  • 24.61 (3)
  • 27.94 (4)
to
Cutting Direction
  • B (138)
  • E (67)
  • P (7)
  • S (3)
Rake Angle Style
  • NEGATIVE-ZERO (19)
  • NEUTRAL (ZERO) (26)
  • POSITIVE-ZERO (170)
Maximum Bore Depth
  • 12.3 (1)
  • 12.7 (10)
  • 16.0 (2)
  • 19.048 (7)
  • 19.05 (7)
  • 20.0 (3)
  • 22.22 (3)
  • 22.225 (1)
  • 22.23 (1)
  • 23.76 (3)
  • 24.0 (4)
  • 25.4 (20)
  • 25.72 (1)
  • 28.56 (4)
  • 28.572 (9)
  • 28.578 (1)
  • 28.58 (3)
  • 30.0 (2)
  • 31.748 (5)
  • 31.75 (13)
  • 31.76 (1)
  • 32.0 (1)
  • 36.0 (5)
  • 38.04 (4)
  • 38.08 (4)
  • 38.1 (21)
  • 38.12 (3)
  • 40.0 (1)
  • 47.55 (1)
  • 47.58 (6)
  • 47.61 (1)
  • 47.62 (2)
  • 47.622 (4)
  • 48.0 (4)
  • 50.8 (10)
  • 57.12 (6)
  • 57.15 (2)
  • 63.48 (3)
  • 63.5 (4)
  • 63.52 (4)
  • 72.0 (1)
  • 76.2 (14)
  • 95.22 (6)
  • 96.0 (1)
  • 101.6 (1)
  • 114.24 (3)
  • 114.3 (1)
  • 152.4 (3)
to
Maximum Bore Depth
  • 0.484 (1)
  • 0.5 (10)
  • 0.628 (2)
  • 0.75 (14)
  • 0.788 (3)
  • 0.875 (5)
  • 0.936 (3)
  • 0.942 (1)
  • 0.9432 (1)
  • 0.944 (2)
  • 1.0 (20)
  • 1.012 (1)
  • 1.122 (2)
  • 1.125 (15)
  • 1.182 (2)
  • 1.25 (19)
  • 1.26 (1)
  • 1.416 (5)
  • 1.5 (32)
  • 1.5748 (1)
  • 1.872 (7)
  • 1.875 (7)
  • 1.888 (1)
  • 1.89 (3)
  • 2.0 (10)
  • 2.25 (8)
  • 2.5 (11)
  • 2.832 (1)
  • 3.0 (14)
  • 3.75 (6)
  • 3.78 (1)
  • 4.0 (1)
  • 4.5 (4)
  • 6.0 (3)
to
Boring Bar Material
  • C (97)
  • S (109)
Wiper Insert
  • N (211)
  • Y (3)
Front-End
Clamp Style
  • S (188)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (87)
  • T-TRIANGLE 60 (107)
  • THREADING (3)
  • W-TRIGON 80 (19)
Cutting Width
  • 0.762 (3)
  • 1.524 (3)
to
Cutting Width
  • 0.03 (3)
  • 0.06 (3)
to
Maximum Cutting Depth
  • 1.57 (1)
  • 1.91 (1)
  • 2.59 (1)
  • 3.17 (1)
  • 3.18 (4)
to
Maximum Cutting Depth
  • 0.062 (1)
  • 0.075 (1)
  • 0.102 (1)
  • 0.125 (5)
to
Insert Geometry
Cutting Tool Material
  • B H (3)
  • B L (37)
  • D P (140)
  • H T (183)
  • H W (208)
Back-End
Connection Type
  • BORING BAR (215)
Back-End Diameter
  • 0.156 (3)
  • 0.157 (3)
  • 0.187 (2)
  • 0.1875 (21)
  • 0.197 (5)
  • 0.2358 (1)
  • 0.236 (7)
  • 0.25 (17)
  • 0.312 (7)
  • 0.3125 (9)
  • 0.315 (4)
  • 0.375 (25)
  • 0.3937 (1)
  • 0.394 (2)
  • 0.472 (3)
  • 0.5 (52)
  • 0.625 (33)
  • 0.63 (2)
  • 0.75 (13)
  • 1.0 (7)
to
Back-End Diameter
  • 3.96 (3)
  • 4.0 (3)
  • 4.76 (4)
  • 4.762 (18)
  • 4.763 (1)
  • 5.0 (5)
  • 6.0 (8)
  • 6.34 (4)
  • 6.35 (13)
  • 7.925 (1)
  • 7.93 (6)
  • 7.937 (9)
  • 8.0 (4)
  • 9.52 (14)
  • 9.524 (1)
  • 9.525 (7)
  • 9.53 (3)
  • 10.0 (3)
  • 12.0 (3)
  • 12.7 (52)
  • 15.87 (27)
  • 15.875 (1)
  • 15.88 (5)
  • 16.0 (2)
  • 19.04 (3)
  • 19.05 (10)
  • 25.4 (7)
to
other
Platform
  • CCBI (34)
  • CCBM (10)
  • CSBI (26)
  • CSBM (10)
  • FCBI (24)
  • FCBM (3)
  • FSBI (18)
  • FSBM (1)
  • FSRI (2)
  • GCBIW (4)
  • GSBIW (3)
  • GSBMW (1)
  • QCBI (8)
  • QCBIW (4)
  • QCBM (1)
  • QCMI (3)
  • QSBI (16)
  • QSBIW (2)
  • QSBM (1)
  • QSBMW (1)
  • QSMI (4)
  • QSOI (3)
  • QSRI (6)
  • SCBI (8)
  • SCBIW (2)
  • SDBIC (2)
  • SDBM (1)
  • SSBI (13)
  • SSBIC (1)
  • SSBIW (2)
  • SSOI (3)
Tool Unit
  • I (188)
  • M (29)
Over All Length [L]
  • 60.32 (2)
  • 63.5 (25)
  • 69.85 (11)
  • 69.86 (1)
  • 70.0 (3)
  • 72.2 (1)
  • 76.2 (14)
  • 79.37 (1)
  • 85.72 (3)
  • 85.73 (1)
  • 88.9 (6)
  • 95.25 (10)
  • 100.33 (3)
  • 100.58 (2)
  • 101.51 (2)
  • 101.59 (1)
  • 101.6 (36)
  • 107.95 (5)
  • 114.3 (2)
  • 120.65 (2)
  • 126.91 (1)
  • 127.0 (9)
  • 152.0 (1)
  • 152.15 (2)
  • 152.4 (44)
  • 154.2 (1)
  • 177.8 (4)
  • 203.2 (9)
  • 254.0 (9)
  • 304.8 (1)
  • 304.81 (1)
to
Over All Length [L]
  • 2.375 (2)
  • 2.5 (25)
  • 2.75 (12)
  • 2.756 (2)
  • 2.757 (1)
  • 3.0 (15)
  • 3.125 (1)
  • 3.375 (4)
  • 3.5 (6)
  • 3.75 (10)
  • 3.95 (3)
  • 3.96 (2)
  • 3.997 (2)
  • 4.0 (37)
  • 4.25 (5)
  • 4.5 (2)
  • 4.75 (2)
  • 4.997 (1)
  • 5.0 (9)
  • 5.9843 (1)
  • 5.99 (2)
  • 6.0 (45)
  • 7.0 (4)
  • 8.0 (9)
  • 10.0 (9)
  • 12.0 (2)
to
Insert Hand
  • L (184)
  • N (208)
  • R (185)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Small Hole Boring Bars for Turning

Clamping System S • Carbide
(20 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [KRA] Lead Angle ANSI [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [A] Coolant Hole Diameter [A] Coolant Hole Dia [GAAP] Axial Rake Angle Gage Insert Insert Screw ID Drive Size
2831945 CCBI16515667L CCBI16515667L   WG -7.000 3.96 .156 4.5700 .1800 2.4100 .0950 152.4000 6.000 1.0200 .0400 0.000 CD..120605 T6
    List price:
    $298.56 /each.
    Your price::
    Qty
    2831949 CCBI16515667R CCBI16515667R   WG -7.000 3.96 .156 4.5700 .1800 2.4100 .0950 152.4000 6.000 1.0200 .0400 0.000 CD..120605 T6
      List price:
      $272.93 /each.
      Your price::
      Qty
      2832029 CCBI25065R CCBI25065R   WG -5.000 6.35 .25 7.2400 .2850 3.6800 .1450 152.4000 6.000 1.1900 .0470 5.000 CD..120605 T6
        List price:
        $272.94 /each.
        Your price::
        Qty
        2832049 CCBI25045R CCBI25045R   WG -5.000 6.35 .25 7.2400 .2850 3.6800 .1450 101.6000 4.000 1.1900 .0470 5.000 CD..120605 T6
          List price:
          $256.97 /each.
          Your price::
          Qty
          2832183 CCBI18745R CCBI18745R   WG -5.000 4.762 .1875 5.5400 .2180 2.8200 .1110 101.6000 4.000 1.0200 .0400 5.000 CD..120605 T6
            List price:
            $256.97 /each.
            Your price::
            Qty
            2832265 CCBI31265L CCBI31265L   WG -5.000 7.937 .3125 9.0400 .3560 4.7000 .1850 152.4000 6.000 2.3600 .0930 5.000 CD..120605 T6
              List price:
              $295.33 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Small Hole Boring Bars for Turning

              Clamping System S • Carbide Stepped
              (14 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [KRA] Lead Angle ANSI [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [A] Coolant Hole Diameter [A] Coolant Hole Dia [GAAP] Axial Rake Angle Gage Insert Insert Screw ID Drive Size
              2832141 CCBI20350015R CCBI20350015R   WG -5.000 12.7 .5 5.9400 .2340 3.0200 .1190 63.5000 2.500 25.4000 1.000 1.0200 .0400 5.000 CD..S4T002 T6
                List price:
                $343.25 /each.
                Your price::
                Qty
                3337598 CCBI2505001250R CCBI2505001250R   WG 0.000 12.7 .5 7.4200 .2920 3.8600 .1520 69.8500 2.750 31.7500 1.250 3.1800 .1250 5.000 CD..120605 T6
                  List price:
                  $343.25 /each.
                  Your price::
                  Qty
                  2831976 CCBI2506251255R CCBI2506251255R   WG -5.000 15.87 .625 7.2400 .2850 3.6800 .1450 95.2500 3.750