KM™
Filter
Filter
Filter anzeigen in
MetricInch
Werkstoff des Werkstücks
Werkstoff des Werkstücks
- P Stahl (1103)
- P0Kohlenstoffarme Stähle, langspanend C < .25%; <125 HB; <530 N/mm^2 UTS(1103)
- P1Kohlenstoffarme Stähle, kurzspanend C < .25%; <125 HB; <530 N/mm^2 UTS(1103)
- P2Stähle mit mittlerem und hohem Kohlenstoffgehalt C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1103)
- P3Legierter Stahl/Werkzeugstahl C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1103)
- P4Legierter Stahl/Werkzeugstahl C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1103)
- P5Ferritische, martensitische und Rostfreie PH-Stähle <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1103)
- P6Hochfeste ferritische, martensitische und PH-Edelstähle 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1103)
- M Rostfreier Stahl (1092)
- M1Austenitischer, Rostfreier Stahl 130-200 HB; <600 N/mm^2 UTS(1092)
- M2Hochfeste austenitische, rostfreie Stähle und Edelstahlguss 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1092)
- M3Duplex-Edelstahl 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1092)
- K Gusseisen (1130)
- K1Grauguss 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1130)
- K2GGV- und Sphäroguss mit niedriger bis mittlerer Festigkeit 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1130)
- K3Hochfestes und zwischenstufenvergütetes duktiles Gusseisen 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1130)
- N Buntmetalle (1072)
- N1Geschmiedetes Aluminium (1069)
- N2Aluminiumlegierungen mit geringem Siliziumgehalt und Magnesiumlegierungen Si <12,2 %(1068)
- N3Aluminiumlegierungen mit hohem Siliziumgehalt Si >12,2%(706)
- N4Kupfer-, Messing- und Zink-Basis mit einem Zerspanbarkeitsindex von 70 bis 100 (1072)
- N5Nylon, Kunststoffe, Gummi, Phenole und Glasfaser (1068)
- N6Kohlefaser- und Graphit-Verbundwerkstoffe, CFRP (1064)
- N7MMCs (958)
- S Hochwarmfeste Legierungen (1110)
- S1Warmfeste Legierungen auf Eisenbasis 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1108)
- S2Warmfeste Legierungen auf Kobaltbasis 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1110)
- S3Warmfeste Legierungen auf Nickelbasis 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1108)
- S4Titan und Titanlegierungen 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1089)
- H Gehärtete Werkstoffe (891)
- H1Gehärtete Werkstoffe 44-48 HRC(891)
- H2Gehärtete Werkstoffe 48-55 HRC(891)
- H3Gehärtete Werkstoffe 56-60 HRC(889)
- H4Gehärtete Werkstoffe >60 HRC(838)
- C Verbundwerkstoffe (CFRP) (871)
- C1CFRP, CFRP / CFRP (867)
- C2CFRP / Aluminium CFRP / Nichteisen (763)
Anwendungen
Anwendungen
Chamfer Turning (44)
Cut-Off (38)
Deep Grooving (38)
Face Grooving (38)
Facing (659)
Grooving (124)
ID Facing (6)
ID Grooving (67)
ID Thread Turning (128)
Multiple Direction Cutting (740)
OD Thread Turning (158)
Plunge Turning (50)
Profiling (666)
TRN Boring (601)
Turning (867)
Gewindeart
Gewindeart
- 55 (62)
- 60 (196)
- ACME (118)
- API (92)
- API BUTTRESS (13)
- API RD (94)
- BSPT (30)
- BSW (118)
- BUTTRESS (125)
- M (97)
- NPT (96)
- NPTF (30)
- RD DIN 405 (47)
- STUB ACME (101)
- TR DIN 103 (55)
- UN (180)
- UNJ (96)
Schnittbedingung
Schnittbedingung
- Heavily Interrupted Cut (1040)
- Lightly Interrupted Cut (1053)
- Smooth Cut (1054)
ISO-Einstellwinkel [KRI]
ISO-Einstellwinkel [KRI]
- 45.0 (56)
- 48.0 (14)
- 49.783 (3)
- 50.0 (3)
- 62.5 (20)
- 63.0 (8)
- 72.5 (2)
- 75.0 (125)
- 85.0 (4)
- 90.0 (304)
- 93.0 (280)
- 95.0 (285)
- 107.5 (52)
bis
Anschlussart
Anschlussart
- KM (801)
Schneidkanten pro Wendeschneidplatte
Schneidkanten pro Wendeschneidplatte
- 1.0 (736)
- 2.0 (735)
- 3.0 (218)
- 4.0 (648)
- 6.0 (111)
- 8.0 (323)
bis
Gesamtlänge [L]
Gesamtlänge [L]
- 0.787 in(33)
- 0.7874 in(46)
- 0.9843 in(35)
- 1.1811 in(106)
- 1.378 in(45)
- 1.5748 in(51)
- 1.575 in(78)
- 1.7717 in(7)
- 1.772 in(5)
- 1.811 in(6)
- 1.85 in(3)
- 1.8504 in(3)
- 1.9685 in(51)
- 1.969 in(101)
- 2.283 in(3)
- 2.362 in(123)
- 2.3622 in(81)
- 2.7559 in(69)
- 2.756 in(66)
- 2.925 in(2)
- 3.122 in(1)
- 3.1496 in(28)
- 3.4252 in(2)
- 3.516 in(1)
- 3.543 in(2)
- 3.5433 in(45)
- 3.622 in(2)
- 3.819 in(2)
- 3.937 in(35)
- 3.94 in(2)
- 4.0 in(5)
- 4.3307 in(35)
- 4.331 in(3)
- 4.3917 in(4)
- 4.4252 in(4)
- 4.4882 in(4)
- 4.528 in(17)
- 4.7244 in(1)
- 4.819 in(2)
- 4.92 in(6)
- 4.921 in(2)
- 4.9213 in(21)
- 5.0 in(4)
- 5.1181 in(1)
- 5.3071 in(2)
- 5.5118 in(36)
- 5.512 in(12)
- 5.9055 in(3)
- 6.0 in(3)
- 6.6929 in(4)
- 6.693 in(5)
- 30.0 in(1)
bis
Gesamtlänge [L]
Gesamtlänge [L]
- 1.181 mm(1)
- 20.0 mm(79)
- 25.0 mm(35)
- 30.0 mm(106)
- 35.0 mm(45)
- 40.0 mm(129)
- 45.0 mm(12)
- 46.0 mm(6)
- 47.0 mm(6)
- 50.0 mm(152)
- 58.0 mm(3)
- 60.0 mm(204)
- 70.0 mm(135)
- 74.296 mm(2)
- 79.3 mm(1)
- 80.0 mm(28)
- 87.0 mm(2)
- 89.31 mm(1)
- 90.0 mm(47)
- 92.0 mm(2)
- 97.0 mm(2)
- 100.0 mm(37)
- 101.6 mm(5)
- 110.0 mm(38)
- 111.55 mm(4)
- 112.4 mm(4)
- 114.0 mm(4)
- 115.0 mm(17)
- 120.0 mm(1)
- 122.4 mm(2)
- 125.0 mm(29)
- 127.0 mm(4)
- 130.0 mm(1)
- 134.8 mm(2)
- 140.0 mm(48)
- 150.0 mm(3)
- 152.4 mm(3)
- 170.0 mm(9)
bis
Eckenradius
Eckenradius
- 0.0 in(64)
- 0.001 in(78)
- 0.002 in(168)
- 0.003 in(193)
- 0.004 in(653)
- 0.005 in(54)
- 0.006 in(105)
- 0.007 in(108)
- 0.008 in(718)
- 0.009 in(57)
- 0.01 in(115)
- 0.011 in(51)
- 0.012 in(75)
- 0.013 in(80)
- 0.014 in(159)
- 0.015 in(6)
- 0.016 in(830)
- 0.017 in(9)
- 0.018 in(80)
- 0.019 in(26)
- 0.02 in(99)
- 0.021 in(7)
- 0.023 in(81)
- 0.024 in(52)
- 0.026 in(3)
- 0.028 in(14)
- 0.03 in(58)
- 0.031 in(970)
- 0.032 in(3)
- 0.035 in(80)
- 0.036 in(5)
- 0.038 in(3)
- 0.039 in(103)
- 0.047 in(905)
- 0.049 in(99)
- 0.055 in(5)
- 0.059 in(99)
- 0.062 in(54)
- 0.063 in(715)
- 0.069 in(99)
- 0.078 in(54)
- 0.079 in(67)
- 0.089 in(54)
- 0.094 in(208)
- 0.098 in(26)
- 0.125 in(42)
- 0.126 in(21)
- 0.157 in(29)
- 0.188 in(2)
- 0.197 in(3)
- 0.236 in(4)
- 0.25 in(11)
- 0.315 in(1)
- 0.394 in(3)
- 0.492 in(5)
- 0.63 in(4)
bis
Eckenradius
Eckenradius
- 0.0 mm(64)
- 0.025 mm(78)
- 0.05 mm(168)
- 0.075 mm(193)
- 0.1 mm(653)
- 0.125 mm(54)
- 0.15 mm(105)
- 0.175 mm(108)
- 0.2 mm(718)
- 0.225 mm(57)
- 0.25 mm(115)
- 0.275 mm(51)
- 0.3 mm(75)
- 0.325 mm(80)
- 0.35 mm(159)
- 0.375 mm(6)
- 0.4 mm(830)
- 0.425 mm(9)
- 0.45 mm(80)
- 0.475 mm(26)
- 0.5 mm(99)
- 0.525 mm(7)
- 0.575 mm(81)
- 0.6 mm(52)
- 0.65 mm(3)
- 0.7 mm(14)
- 0.75 mm(58)
- 0.775 mm(99)
- 0.8 mm(871)
- 0.825 mm(3)
- 0.9 mm(80)
- 0.925 mm(5)
- 0.975 mm(3)
- 1.0 mm(103)
- 1.2 mm(905)
- 1.25 mm(99)
- 1.4 mm(5)
- 1.5 mm(99)
- 1.575 mm(54)
- 1.6 mm(715)
- 1.75 mm(99)
- 1.975 mm(54)
- 2.0 mm(67)
- 2.25 mm(54)
- 2.375 mm(43)
- 2.4 mm(208)
- 2.5 mm(26)
- 3.175 mm(42)
- 3.2 mm(21)
- 4.0 mm(29)
- 4.775 mm(2)
- 5.0 mm(3)
- 6.0 mm(4)
- 6.35 mm(11)
- 8.0 mm(1)
- 10.0 mm(3)
- 12.5 mm(5)
- 16.0 mm(4)
bis
application
Minimale Schnitttiefe
Minimale Schnitttiefe
Minimaler Vorschub
Minimaler Vorschub
Schneidstoffsorte
Schneidstoffsorte
- C3 (6)
- CBN6 (6)
- CG5 (40)
- CG6 (15)
- CM1 (15)
- CW2015 (476)
- CW3020 (13)
- CW5025 (336)
- HCK10 (10)
- HWK10 (4)
- K060 (125)
- K090 (76)
- K1 (28)
- K313 (869)
- K420 (126)
- K68 (728)
- KB1340 (223)
- KB1345 (319)
- KB1610 (443)
- KB1630 (409)
- KB5610 (342)
- KB5630 (351)
- KB9640 (9)
- KBH10 (550)
- KBH10B (363)
- KBH20 (652)
- KBH20B (363)
- KBK35 (105)
- KBK45 (9)
- KC5010 (1050)
- KC5020P (12)
- KC5025 (1017)
- KC5410 (775)
- KC720 (141)
- KC730 (797)
- KC850 (936)
- KC9110 (13)
- KC9125 (66)
- KCK05 (709)
- KCK05B (326)
- KCK15 (755)
- KCK15B (775)
- KCK20 (910)
- KCK20B (878)
- KCM15 (765)
- KCM15B (730)
- KCM25 (825)
- KCM25B (825)
- KCM25S (52)
- KCM35 (711)
- KCM35B (394)
- KCP05 (619)
- KCP05B (564)
- KCP10 (852)
- KCP10B (991)
- KCP15 (17)
- KCP20S (52)
- KCP25 (867)
- KCP25B (1008)
- KCP25C (894)
- KCP30 (797)
- KCP30B (495)
- KCP40 (564)
- KCP40B (626)
- KCPK05 (631)
- KCS10 (322)
- KCS10B (796)
- KCS25S (52)
- KCU10 (988)
- KCU10B (994)
- KCU25 (955)
- KCU25B (971)
- KD1400 (453)
- KD1405 (311)
- KD1425 (542)
- KN10S (64)
- KS15 (125)
- KT315 (789)
- KT325 (227)
- KTP10 (658)
- KTP25S (524)
- KY1540 (142)
- KY1615 (98)
- KY3500 (599)
- KY4300 (280)
- KY4400 (552)
- KYHK15B (571)
- KYK10 (298)
- KYK25 (405)
- KYS25 (190)
- KYS30 (334)
- PB100 (125)
- PB250 (10)
- PN120 (13)
- SP4019 (119)
- THM (492)
- THM-X (317)
- THMF-X (204)
- TN10P (633)
- TN10U (527)
- TN15M (458)
- TN15U (367)
- TN2000 (495)
- TN20K (655)
- TN20P (742)
- TN30M (512)
- TN30P (441)
- TN4000 (454)
- TN6010 (381)
- TN6025 (247)
- TN7 (6)
- TTM09 (4)
- TTR (29)
- TTR-X (28)
- TTS (242)
- W00160 (7)
- W00162 (11)
- WBH10P (324)
- WBH10U (163)
- WBH20P (548)
- WBH30P (362)
- WBK40U (50)
- WBK45U (94)
- WDN00U (258)
- WDN10U (6)
- WDN25U (456)
- WK05CT (672)
- WK15CT (471)
- WK20CT (803)
- WM15CT (703)
- WM25CT (792)
- WM35CT (555)
- WP05CT (177)
- WP15CT (832)
- WP20TT (40)
- WP25CT (832)
- WP35CT (664)
- WS10PT (703)
- WS25PT (715)
- WU05PT (84)
- WU10HT (741)
- WU10PT (596)
- WU25PT (563)
- X00580 (125)
- X00581 (125)
- X00582 (125)
- X00583 (125)
- X00584 (125)
- X00585 (125)
- X00586 (125)
- X00591 (125)
- X00592 (125)
- X00593 (125)
- X00594 (125)
- X00596 (125)
- X00597 (125)
- X00599 (125)
Schneidrichtung
Schneidrichtung
- L (369)
- N (47)
- R (385)
Schlicht-Wendeschneidplatte
Schlicht-Wendeschneidplatte
- N (1131)
- Y (459)
F Abmessung
F Abmessung
- 0.0 mm(50)
- 4.0 mm(1)
- 5.0 mm(1)
- 5.75 mm(3)
- 5.79 mm(3)
- 7.0 mm(11)
- 7.35 mm(1)
- 7.52 mm(2)
- 7.53 mm(1)
- 8.0 mm(20)
- 9.0 mm(13)
- 10.0 mm(53)
- 11.0 mm(24)
- 12.5 mm(36)
- 13.0 mm(26)
- 16.0 mm(34)
- 17.0 mm(90)
- 22.0 mm(125)
- 24.0 mm(9)
- 27.0 mm(106)
- 28.5 mm(2)
- 30.0 mm(14)
- 35.0 mm(55)
- 38.0 mm(14)
- 43.0 mm(48)
- 48.0 mm(17)
- 53.0 mm(40)
- 59.0 mm(2)
bis
F Abmessung
F Abmessung
- 0.0 in(50)
- 0.1575 in(1)
- 0.1969 in(1)
- 0.2264 in(3)
- 0.228 in(3)
- 0.2756 in(10)
- 0.276 in(1)
- 0.289 in(1)
- 0.2961 in(2)
- 0.2965 in(1)
- 0.315 in(20)
- 0.354 in(2)
- 0.3543 in(11)
- 0.3937 in(34)
- 0.394 in(19)
- 0.4331 in(24)
- 0.4921 in(36)
- 0.5118 in(24)
- 0.512 in(2)
- 0.6299 in(33)
- 0.63 in(1)
- 0.669 in(11)
- 0.6693 in(79)
- 0.866 in(15)
- 0.8661 in(110)
- 0.9449 in(9)
- 1.063 in(106)
- 1.122 in(2)
- 1.181 in(2)
- 1.1811 in(12)
- 1.378 in(55)
- 1.4961 in(14)
- 1.6929 in(45)
- 1.693 in(3)
- 1.8898 in(16)
- 1.89 in(1)
- 2.0866 in(36)
- 2.087 in(4)
- 2.3228 in(1)
- 2.323 in(1)
bis
Minimaler Durchmesser der Axialnutenbearbeitung
Minimaler Durchmesser der Axialnutenbearbeitung
- 0.0 mm(51)
- 11.1 mm(3)
- 11.15 mm(3)
- 13.0 mm(11)
- 14.25 mm(3)
- 16.0 mm(13)
- 18.5 mm(5)
- 20.0 mm(19)
- 25.0 mm(31)
- 32.0 mm(85)
- 34.0 mm(6)
- 40.0 mm(89)
- 41.3 mm(20)
- 44.0 mm(16)
- 47.6 mm(20)
- 50.0 mm(82)
- 54.0 mm(36)
- 56.625 mm(20)
- 57.2 mm(11)
- 60.0 mm(2)
- 63.0 mm(32)
- 70.0 mm(41)
- 74.0 mm(4)
- 80.0 mm(51)
- 86.0 mm(61)
- 88.9 mm(40)
- 90.0 mm(6)
- 94.0 mm(2)
- 100.0 mm(46)
- 104.0 mm(2)
- 106.0 mm(53)
- 118.0 mm(2)
- 120.0 mm(2)
- 139.7 mm(20)
- 150.0 mm(1)
- 174.6 mm(20)
- 209.6 mm(11)
- 222.3 mm(11)
bis
Minimaler Durchmesser der Axialnutenbearbeitung
Minimaler Durchmesser der Axialnutenbearbeitung
- 0.0 in(51)
- 0.437 in(3)
- 0.439 in(3)
- 0.5118 in(10)
- 0.512 in(1)
- 0.561 in(3)
- 0.6299 in(11)
- 0.63 in(2)
- 0.7283 in(5)
- 0.7874 in(19)
- 0.984 in(1)
- 0.9843 in(30)
- 1.2598 in(74)
- 1.26 in(11)
- 1.3386 in(6)
- 1.5748 in(78)
- 1.575 in(11)
- 1.626 in(20)
- 1.732 in(15)
- 1.7323 in(1)
- 1.874 in(20)
- 1.9685 in(37)
- 1.969 in(44)
- 2.126 in(36)
- 2.229 in(20)
- 2.252 in(11)
- 2.362 in(2)
- 2.48 in(23)
- 2.4803 in(10)
- 2.756 in(41)
- 2.913 in(4)
- 3.15 in(51)
- 3.386 in(61)
- 3.5 in(40)
- 3.543 in(6)
- 3.701 in(2)
- 3.937 in(46)
- 4.094 in(2)
- 4.173 in(53)
- 4.6457 in(1)
- 4.646 in(1)
- 4.724 in(2)
- 5.5 in(20)
- 5.906 in(1)
- 6.874 in(20)
- 8.252 in(11)
- 8.752 in(11)
bis
Maximaler Durchmesser der Axialnutenbearbeitung
Maximaler Durchmesser der Axialnutenbearbeitung
- 393.661 in(129)
bis
Maximaler Durchmesser der Axialnutenbearbeitung
Maximaler Durchmesser der Axialnutenbearbeitung
- 9999.0 mm(129)
bis
Schneidrichtung
Schneidrichtung
- B (207)
- E (205)
- S (388)
Spanwinkelausführung
Spanwinkelausführung
- DOUBLE NEGATIVE (471)
- DOUBLE POSITIVE (4)
- NEGATIVE-ZERO (58)
- NEUTRAL (ZERO) (240)
- POSITIVE-NEGATIVE (1)
- POSITIVE-ZERO (18)
Bohrungstiefe min.
Bohrungstiefe min.
- 1.378 in(27)
- 1.3842 in(2)
- 1.3843 in(3)
- 1.43 in(1)
- 1.5079 in(2)
- 1.508 in(1)
- 1.575 in(76)
- 1.6142 in(6)
- 1.6535 in(2)
- 1.6539 in(2)
- 1.654 in(1)
- 1.6547 in(2)
- 1.6618 in(7)
- 1.701 in(2)
- 1.772 in(5)
- 1.9378 in(2)
- 1.9685 in(2)
- 1.969 in(86)
- 1.986 in(2)
- 2.0394 in(3)
- 2.1689 in(15)
- 2.2047 in(2)
- 2.209 in(3)
- 2.2091 in(6)
- 2.211 in(2)
- 2.2835 in(4)
- 2.362 in(113)
- 2.3622 in(7)
- 2.3807 in(2)
- 2.381 in(2)
- 2.444 in(3)
- 2.756 in(62)
- 2.7567 in(10)
- 2.757 in(2)
- 2.7685 in(4)
- 2.77 in(1)
- 2.774 in(2)
- 2.7744 in(4)
- 2.9528 in(2)
- 2.953 in(1)
- 2.954 in(1)
- 2.9543 in(16)
- 2.9929 in(8)
- 3.037 in(4)
- 3.0445 in(8)
- 3.132 in(1)
- 3.1496 in(6)
- 3.15 in(2)
- 3.151 in(2)
- 3.1992 in(2)
- 3.2 in(2)
- 3.434 in(4)
- 3.4343 in(2)
- 3.445 in(4)
- 3.4689 in(2)
- 3.474 in(8)
- 3.476 in(4)
- 3.485 in(2)
- 3.5929 in(1)
- 3.593 in(3)
- 3.594 in(2)
- 3.7803 in(12)
- 3.7898 in(3)
- 3.79 in(5)
- 3.908 in(1)
- 3.937 in(4)
- 4.11 in(4)
- 4.412 in(10)
- 4.4122 in(2)
- 4.418 in(2)
- 4.464 in(1)
- 4.528 in(17)
- 4.612 in(10)
- 4.621 in(1)
- 4.7252 in(4)
- 4.7378 in(7)
- 4.738 in(6)
- 5.5118 in(2)
- 5.866 in(1)
- 5.882 in(7)
bis
Bohrungstiefe min.
Bohrungstiefe min.
- 35.0 mm(27)
- 35.16 mm(5)
- 36.33 mm(1)
- 38.3 mm(3)
- 40.0 mm(76)
- 41.0 mm(6)
- 42.0 mm(3)
- 42.01 mm(2)
- 42.03 mm(2)
- 42.21 mm(7)
- 43.21 mm(2)
- 45.0 mm(5)
- 49.22 mm(2)
- 50.0 mm(88)
- 50.45 mm(2)
- 51.8 mm(3)
- 55.09 mm(15)
- 56.0 mm(2)
- 56.11 mm(9)
- 56.16 mm(2)
- 58.0 mm(4)
- 60.0 mm(120)
- 60.47 mm(4)
- 62.07 mm(3)
- 70.0 mm(62)
- 70.02 mm(12)
- 70.32 mm(4)
- 70.36 mm(1)
- 70.47 mm(6)
- 75.0 mm(3)
- 75.04 mm(17)
- 76.02 mm(8)
- 77.14 mm(4)
- 77.33 mm(8)
- 79.55 mm(1)
- 80.0 mm(8)
- 80.04 mm(2)
- 81.26 mm(4)
- 87.23 mm(6)
- 87.5 mm(4)
- 88.11 mm(2)
- 88.23 mm(8)
- 88.29 mm(2)
- 88.3 mm(2)
- 88.52 mm(2)
- 91.26 mm(4)
- 91.28 mm(2)
- 96.02 mm(12)
- 96.26 mm(8)
- 99.25 mm(1)
- 100.0 mm(4)
- 104.4 mm(4)
- 112.07 mm(12)
- 112.22 mm(2)
- 113.37 mm(1)
- 115.0 mm(17)
- 117.14 mm(10)
- 117.38 mm(1)
- 120.02 mm(4)
- 120.34 mm(13)
- 140.0 mm(2)
- 149.4 mm(8)
bis
Bohrstangenmaterial
Bohrstangenmaterial
- C (7)
- S (329)
frontEnd
Stirnseitige Aufnahme
Stirnseitige Aufnahme
- BORING BAR ADAPTER (77)
- CARTRIDGE MOUNT (13)
- COMBI SHELL ADAPTER (19)
- CUTOFF SUPPORT BLADE (14)
- DRILL CHUCK ADAPTER (4)
- DRILL SHANK 2 FLATS (8)
- END MILL ADAPTER (81)
- ER COLLET CHUCK (41)
- EXTENSION (15)
- HYDRAULIC CHUCK (33)
- HYDRAULIC CHUCK-HIGH TORQUE (4)
- HYDRAULIC CHUCK-SLIM LINE (15)
- KM MODULAR ADAPTER (249)
- RC TAP CHUCK ADAPTER-T & C (2)
- REDUCER (39)
- SCREW-ON ADAPTER (16)
- SHELL MILL ADAPTER (65)
- SHRINK FIT ADAPTER (48)
- SQUARE SHANK ADAPTER (48)
- SQUARE SHANK ADAPTER-2 SLOTS (2)
- SQUARE SHANK ADAPTER-4 SLOTS (1)
- TAP CHUCK ADAPTER (4)
- TOP CUT PLUS ADAPTER (3)
- WHISTLE NOTCH ADAPTER (39)
Spannsystem
Spannsystem
- C (26)
- M (468)
- N (141)
- P (242)
- S (275)
- W (2)
Schnittbreite
Schnittbreite
- 0.0197 in(45)
- 0.031 in(45)
- 0.0315 in(45)
- 0.035 in(22)
- 0.039 in(45)
- 0.0394 in(99)
- 0.041 in(45)
- 0.047 in(99)
- 0.0472 in(99)
- 0.055 in(45)
- 0.0551 in(45)
- 0.058 in(45)
- 0.0591 in(99)
- 0.062 in(99)
- 0.0669 in(45)
- 0.067 in(45)
- 0.0689 in(99)
- 0.072 in(54)
- 0.076 in(23)
- 0.0768 in(45)
- 0.077 in(23)
- 0.078 in(54)
- 0.0787 in(99)
- 0.079 in(71)
- 0.0866 in(99)
- 0.088 in(99)
- 0.0886 in(73)
- 0.094 in(99)
- 0.097 in(54)
- 0.0984 in(99)
- 0.105 in(54)
- 0.108 in(45)
- 0.1083 in(99)
- 0.11 in(54)
- 0.118 in(76)
- 0.1181 in(125)
- 0.122 in(54)
- 0.125 in(125)
- 0.126 in(76)
- 0.1278 in(45)
- 0.128 in(54)
- 0.129 in(23)
- 0.131 in(26)
- 0.1378 in(125)
- 0.142 in(54)
- 0.147 in(22)
- 0.151 in(45)
- 0.156 in(54)
- 0.157 in(54)
- 0.1574 in(67)
- 0.1575 in(80)
- 0.167 in(26)
- 0.1673 in(54)
- 0.1771 in(80)
- 0.1772 in(80)
- 0.178 in(54)
- 0.185 in(54)
- 0.188 in(80)
- 0.189 in(80)
- 0.192 in(26)
- 0.193 in(26)
- 0.195 in(54)
- 0.196 in(54)
- 0.1969 in(26)
- 0.197 in(13)
- 0.213 in(26)
- 0.2165 in(13)
- 0.2166 in(13)
- 0.2362 in(26)
- 0.25 in(27)
- 0.256 in(26)
- 0.281 in(2)
- 0.312 in(2)
- 0.375 in(1)
- 0.381 in(3)
- 0.384 in(2)
bis
Schnittbreite
Schnittbreite
- 0.5 mm(45)
- 0.787 mm(45)
- 0.8 mm(45)
- 0.889 mm(22)
- 0.991 mm(45)
- 1.0 mm(99)
- 1.041 mm(45)
- 1.19 mm(73)
- 1.194 mm(99)
- 1.2 mm(99)
- 1.39 mm(45)
- 1.397 mm(22)
- 1.4 mm(45)
- 1.473 mm(45)
- 1.5 mm(99)
- 1.57 mm(77)
- 1.575 mm(99)
- 1.69 mm(22)
- 1.7 mm(45)
- 1.702 mm(45)
- 1.75 mm(99)
- 1.829 mm(54)
- 1.94 mm(23)
- 1.95 mm(45)
- 1.956 mm(23)
- 1.981 mm(54)
- 2.0 mm(99)
- 2.007 mm(45)
- 2.2 mm(99)
- 2.235 mm(76)
- 2.236 mm(26)
- 2.24 mm(45)
- 2.25 mm(73)
- 2.387 mm(26)
- 2.388 mm(99)
- 2.39 mm(28)
- 2.464 mm(54)
- 2.5 mm(99)
- 2.667 mm(54)
- 2.74 mm(23)
- 2.743 mm(22)
- 2.75 mm(99)
- 2.794 mm(54)
- 2.997 mm(76)
- 3.0 mm(125)
- 3.099 mm(54)
- 3.17 mm(54)
- 3.175 mm(125)
- 3.18 mm(36)
- 3.2 mm(76)
- 3.245 mm(45)
- 3.25 mm(54)
- 3.251 mm(26)
- 3.27 mm(23)
- 3.32 mm(26)
- 3.329 mm(26)
- 3.5 mm(125)
- 3.607 mm(54)
- 3.73 mm(22)
- 3.835 mm(22)
- 3.84 mm(45)
- 3.96 mm(54)
- 3.962 mm(54)
- 3.974 mm(26)
- 3.988 mm(54)
- 4.0 mm(80)
- 4.242 mm(26)
- 4.25 mm(54)
- 4.5 mm(80)
- 4.521 mm(54)
- 4.699 mm(54)
- 4.775 mm(80)
- 4.78 mm(13)
- 4.785 mm(13)
- 4.788 mm(13)
- 4.8 mm(54)
- 4.801 mm(80)
- 4.88 mm(26)
- 4.9 mm(26)
- 4.95 mm(54)
- 4.953 mm(26)
- 4.978 mm(54)
- 5.0 mm(26)
- 5.004 mm(13)
- 5.41 mm(26)
- 5.5 mm(26)
- 6.0 mm(26)
- 6.35 mm(27)
- 6.36 mm(13)
- 6.502 mm(26)
- 7.137 mm(2)
- 7.925 mm(2)
- 9.525 mm(1)
- 9.677 mm(3)
- 9.754 mm(2)
bis
Stirnseitentyp
Stirnseitentyp
- FDA - Milling Cutter Arbor (77)
- KMC - Cartridge Mount Kenna (13)
- KMM - KM Micro System (36)
- KMS - KM TBD System (18)
- KMT - KM Adapter (234)
- PMK - Prismatic Adapter Kenna (14)
- SPK-Holding Arbor-Spindle Head (7)
- SWB - Tap Chuck Adapter (6)
- SZK - Collet Taper (41)
- VKT - Square Shank (51)
- ZYL - Cylindrical Adapter (343)
Wendeschneidplatten-Form
Wendeschneidplatten-Form
- C-DIAMOND/RHOMBIC 80 (271)
- D-DIAMOND/RHOMBIC 55 (271)
- LT-TRIANGLE LAY DOWN THREAD 60 (84)
- R-ROUND (34)
- S-SQUARE 90 (130)
- T-TRIANGLE 60 (95)
- TN-TOP NOTCH (130)
- V-DIAMOND/RHOMBIC 35 (75)
- W-TRIGON 80 (66)
Stirnseitenausführung
Stirnseitenausführung
- FDA03 Longit &Transver Drive (2)
- FDA12 Transv Drive&CutRetScr (10)
- FDA13 Long&TranDrv&CutRetScr (10)
- FDA22 Transv Drive & SHCS (44)
- FDA23 Longit&Transv Drv&SHCS (7)
- FDA42TranDrvw/CtrScrwORBoltCir (4)
- KMC-29WID/MAN SerratedBlade Mt (13)
- KMM01 Std Km-Micro Size (16)
- KMM02 Enlarged Flange (20)
- KMS-01 Std KM-TBD NotOnCntr (6)
- KMS-02 Englarged Flange OnCntr (12)
- KMT00 All KM, except 02,05,09 (234)
- PMK02 Cutoff Sup Bld A1-A3 (14)
- SPK02 Bolt Circ Dia 101.6 mm (7)
- SWB-01 WFL#...WES#(Bilz) (6)
- SZK02 Collets 8 Degree Taper (41)
- VKT01 Std Design (51)
- ZYL01 Straight Shank (105)
- ZYL03 Attachment Thread (16)
- ZYL10 Weldon Shank (71)
- ZYL11Shkw/flat&pull back hole (3)
- ZYL13 2Deg-Whistle Notch (39)
- ZYL14 Weldon+Whistle Notch (10)
- ZYL22 Boring Bar Shank (91)
- ZYL56 2Plain Clamp Surf w/Pcs (8)
Wende-schneid-platten-Größe
Wende-schneid-platten-Größe
- 2 (45)
- 3 (54)
- 4 (26)
- 5 (3)
- 6 (2)
Maximale Stechtiefe
Maximale Stechtiefe
- 0.0 in(13)
- 0.1181 in(3)
- 0.1252 in(1)
- 0.138 in(14)
- 0.1382 in(4)
- 0.1772 in(3)
- 0.2098 in(4)
- 0.21 in(23)
- 0.294 in(8)
- 0.3 in(2)
- 0.415 in(2)
- 0.6299 in(1)
- 0.7874 in(1)
- 1.2992 in(1)
- 1.5807 in(2)
bis
Maximale Stechtiefe
Maximale Stechtiefe
- 0.0 mm(13)
- 3.0 mm(3)
- 3.18 mm(1)
- 3.51 mm(18)
- 4.5 mm(3)
- 5.33 mm(27)
- 7.47 mm(8)
- 7.61 mm(2)
- 10.54 mm(2)
- 16.0 mm(1)
- 20.0 mm(1)
- 33.0 mm(1)
- 40.15 mm(2)
bis
Messlänge
Messlänge
- 7.5000 in(1)
- 10.0000 in(1)
- 12.0000 in(1)
- 14.0000 in(9)
- 15.0000 in(1)
- 16.0000 in(10)
- 17.0000 in(1)
- 18.0000 in(1)
- 18.5000 in(1)
- 20.0000 in(5)
- 22.0000 in(2)
- 23.0000 in(5)
- 23.4000 in(2)
- 24.5200 in(6)
- 25.0000 in(21)
- 26.0000 in(11)
- 28.0000 in(6)
- 28.2860 in(2)
- 30.0000 in(28)
- 31.4450 in(1)
- 32.0000 in(20)
- 35.0000 in(6)
- 35.1820 in(2)
- 35.2500 in(4)
- 36.0000 in(2)
- 37.0000 in(2)
- 37.6000 in(4)
- 38.0000 in(2)
- 38.1000 in(4)
- 38.8990 in(2)
- 40.0000 in(26)
- 42.0000 in(2)
- 43.0000 in(3)
- 44.4500 in(2)
- 44.9600 in(1)
- 45.0000 in(21)
- 45.0500 in(1)
- 46.9000 in(4)
- 47.0000 in(1)
- 48.0000 in(2)
- 48.2500 in(1)
- 49.2000 in(2)
- 50.0000 in(21)
- 50.0500 in(1)
- 50.3000 in(2)
- 51.0000 in(1)
- 52.0000 in(2)
- 53.7900 in(7)
- 55.0000 in(25)
- 55.3000 in(4)
- 56.0000 in(1)
- 57.1500 in(2)
- 58.4000 in(1)
- 59.0000 in(4)
- 60.0000 in(50)
- 63.0000 in(4)
- 65.0000 in(32)
- 69.5200 in(1)
- 70.0000 in(44)
- 70.0500 in(1)
- 72.0000 in(2)
- 74.3000 in(2)
- 75.0000 in(18)
- 75.0500 in(1)
- 76.2000 in(2)
- 78.0000 in(2)
- 79.3000 in(1)
- 79.3240 in(1)
- 80.0000 in(62)
- 80.1620 in(1)
- 82.5500 in(2)
- 84.0000 in(3)
- 85.0000 in(22)
- 85.0250 in(1)
- 85.7250 in(1)
- 87.0000 in(2)
- 88.9000 in(3)
- 89.3100 in(1)
- 90.0000 in(37)
- 92.0000 in(2)
- 95.0000 in(14)
- 95.2500 in(1)
- 97.0000 in(4)
- 99.5500 in(1)
- 99.8000 in(1)
- 99.9000 in(1)
- 100.0000 in(39)
- 101.6000 in(6)
- 102.4000 in(4)
- 103.7000 in(1)
- 104.6000 in(2)
- 105.0000 in(14)
- 109.0000 in(5)
- 110.0000 in(13)
- 110.9000 in(1)
- 112.4000 in(4)
- 114.0000 in(2)
- 114.3000 in(4)
- 115.0000 in(4)
- 115.1000 in(1)
- 117.8000 in(2)
- 120.0000 in(26)
- 122.4000 in(2)
- 123.8000 in(2)
- 125.0000 in(5)
- 127.0000 in(3)
- 130.0000 in(4)
- 134.0000 in(2)
- 134.5500 in(2)
- 137.0000 in(1)
- 139.7000 in(2)
- 140.0000 in(5)
- 142.0000 in(4)
- 147.0000 in(1)
- 150.0000 in(4)
- 151.5000 in(1)
- 152.4000 in(3)
- 152.8000 in(1)
- 160.0000 in(16)
- 165.1000 in(1)
- 170.0000 in(9)
- 187.0000 in(1)
- 215.9000 in(1)
- 230.0000 in(1)
- 234.0000 in(1)
- 234.5500 in(2)
- 243.5600 in(1)
- 250.0000 in(1)
- 254.0000 in(1)
- 310.7100 in(2)
- 350.0000 in(1)
- 355.6000 in(1)
- 361.5200 in(2)
- 386.9200 in(2)
- 412.3200 in(2)
- 431.8000 in(1)
- 450.0000 in(1)
- 513.9200 in(2)
Messlänge
Messlänge
- 7.5000 mm(1)
- 10.0000 mm(1)
- 12.0000 mm(1)
- 14.0000 mm(9)
- 15.0000 mm(1)
- 16.0000 mm(10)
- 17.0000 mm(1)
- 18.0000 mm(1)
- 18.5000 mm(1)
- 20.0000 mm(5)
- 22.0000 mm(2)
- 23.0000 mm(5)
- 23.4000 mm(2)
- 24.5200 mm(6)
- 25.0000 mm(21)
- 26.0000 mm(11)
- 28.0000 mm(6)
- 28.2860 mm(2)
- 30.0000 mm(28)
- 31.4450 mm(1)
- 32.0000 mm(20)
- 35.0000 mm(6)
- 35.1820 mm(2)
- 35.2500 mm(4)
- 36.0000 mm(2)
- 37.0000 mm(2)
- 37.6000 mm(4)
- 38.0000 mm(2)
- 38.1000 mm(4)
- 38.8990 mm(2)
- 40.0000 mm(26)
- 42.0000 mm(2)
- 43.0000 mm(3)
- 44.4500 mm(2)
- 44.9600 mm(1)
- 45.0000 mm(21)
- 45.0500 mm(1)
- 46.9000 mm(4)
- 47.0000 mm(1)
- 48.0000 mm(2)
- 48.2500 mm(1)
- 49.2000 mm(2)
- 50.0000 mm(21)
- 50.0500 mm(1)
- 50.3000 mm(2)
- 51.0000 mm(1)
- 52.0000 mm(2)
- 53.7900 mm(7)
- 55.0000 mm(25)
- 55.3000 mm(4)
- 56.0000 mm(1)
- 57.1500 mm(2)
- 58.4000 mm(1)
- 59.0000 mm(4)
- 60.0000 mm(50)
- 63.0000 mm(4)
- 65.0000 mm(32)
- 69.5200 mm(1)
- 70.0000 mm(44)
- 70.0500 mm(1)
- 72.0000 mm(2)
- 74.3000 mm(2)
- 75.0000 mm(18)
- 75.0500 mm(1)
- 76.2000 mm(2)
- 78.0000 mm(2)
- 79.3000 mm(1)
- 79.3240 mm(1)
- 80.0000 mm(62)
- 80.1620 mm(1)
- 82.5500 mm(2)
- 84.0000 mm(3)
- 85.0000 mm(22)
- 85.0250 mm(1)
- 85.7250 mm(1)
- 87.0000 mm(2)
- 88.9000 mm(3)
- 89.3100 mm(1)
- 90.0000 mm(37)
- 92.0000 mm(2)
- 95.0000 mm(14)
- 95.2500 mm(1)
- 97.0000 mm(4)
- 99.5500 mm(1)
- 99.8000 mm(1)
- 99.9000 mm(1)
- 100.0000 mm(39)
- 101.6000 mm(6)
- 102.4000 mm(4)
- 103.7000 mm(1)
- 104.6000 mm(2)
- 105.0000 mm(14)
- 109.0000 mm(5)
- 110.0000 mm(13)
- 110.9000 mm(1)
- 112.4000 mm(4)
- 114.0000 mm(2)
- 114.3000 mm(4)
- 115.0000 mm(4)
- 115.1000 mm(1)
- 117.8000 mm(2)
- 120.0000 mm(26)
- 122.4000 mm(2)
- 123.8000 mm(2)
- 125.0000 mm(5)
- 127.0000 mm(3)
- 130.0000 mm(4)
- 134.0000 mm(2)
- 134.5500 mm(2)
- 137.0000 mm(1)
- 139.7000 mm(2)
- 140.0000 mm(5)
- 142.0000 mm(4)
- 147.0000 mm(1)
- 150.0000 mm(4)
- 151.5000 mm(1)
- 152.4000 mm(3)
- 152.8000 mm(1)
- 160.0000 mm(16)
- 165.1000 mm(1)
- 170.0000 mm(9)
- 187.0000 mm(1)
- 215.9000 mm(1)
- 230.0000 mm(1)
- 234.0000 mm(1)
- 234.5500 mm(2)
- 243.5600 mm(1)
- 250.0000 mm(1)
- 254.0000 mm(1)
- 310.7100 mm(2)
- 350.0000 mm(1)
- 355.6000 mm(1)
- 361.5200 mm(2)
- 386.9200 mm(2)
- 412.3200 mm(2)
- 431.8000 mm(1)
- 450.0000 mm(1)
- 513.9200 mm(2)
Größe der Stirnseite
Größe der Stirnseite
- 0.5 in(1)
- 1.0 in(1)
- 2.5 in(1)
- 3.0 in(1)
- 6.0 in(18)
- 6.35 in(3)
- 7.938 in(3)
- 8.0 in(18)
- 9.525 in(12)
- 9.55 in(1)
- 10.0 in(20)
- 11.113 in(1)
- 12.0 in(29)
- 12.7 in(19)
- 14.0 in(10)
- 14.288 in(1)
- 15.875 in(15)
- 16.0 in(36)
- 18.0 in(9)
- 19.027 in(2)
- 19.05 in(26)
- 19.06 in(1)
- 20.0 in(40)
- 20.18 in(1)
- 22.0 in(9)
- 22.225 in(1)
- 25.0 in(29)
- 25.39 in(1)
- 25.4 in(25)
- 25.41 in(1)
- 27.0 in(11)
- 31.0 in(1)
- 31.027 in(2)
- 31.7 in(2)
- 31.74 in(2)
- 31.75 in(21)
- 32.0 in(72)
- 38.09 in(1)
- 38.1 in(13)
- 38.11 in(1)
- 40.0 in(100)
- 48.0 in(1)
- 50.0 in(63)
- 50.79 in(1)
- 50.8 in(8)
- 60.0 in(2)
- 63.0 in(45)
- 63.49 in(2)
- 63.5 in(2)
- 80.0 in(11)
- 100.0 in(1)
bis
Größe der Stirnseite
Größe der Stirnseite
- 0.5 mm(1)
- 1.0 mm(1)
- 2.5 mm(1)
- 3.0 mm(1)
- 6.0 mm(18)
- 6.35 mm(3)
- 7.938 mm(3)
- 8.0 mm(18)
- 9.525 mm(12)
- 9.55 mm(1)
- 10.0 mm(20)
- 11.113 mm(1)
- 12.0 mm(29)
- 12.7 mm(19)
- 14.0 mm(10)
- 14.288 mm(1)
- 15.875 mm(15)
- 16.0 mm(36)
- 18.0 mm(9)
- 19.027 mm(2)
- 19.05 mm(26)
- 19.06 mm(1)
- 20.0 mm(40)
- 20.18 mm(1)
- 22.0 mm(9)
- 22.225 mm(1)
- 25.0 mm(29)
- 25.39 mm(1)
- 25.4 mm(25)
- 25.41 mm(1)
- 27.0 mm(11)
- 31.0 mm(1)
- 31.027 mm(2)
- 31.7 mm(2)
- 31.74 mm(2)
- 31.75 mm(21)
- 32.0 mm(72)
- 38.09 mm(1)
- 38.1 mm(13)
- 38.11 mm(1)
- 40.0 mm(100)
- 48.0 mm(1)
- 50.0 mm(63)
- 50.79 mm(1)
- 50.8 mm(8)
- 60.0 mm(2)
- 63.0 mm(45)
- 63.49 mm(2)
- 63.5 mm(2)
- 80.0 mm(11)
- 100.0 mm(1)
bis
insertGeometry
Schneidstoff
Schneidstoff
- B H (651)
- B L (658)
- C A (596)
- C N (599)
- D P (644)
- H T (795)
- H W (1119)
backEnd
Aufnahmeart
Aufnahmeart
- TAPER SHANK (801)
Systemgröße
Systemgröße
- KM12 (20)
- KM16 (54)
- KM1612 (1)
- KM20 (46)
- KM2016 (16)
- KM25 (58)
- KM32 (57)
- KM3225 (42)
- KM32TS (21)
- KM40TS (249)
- KM50TS (211)
- KM63TS (274)
- KM63XMZ (148)
- KM80ATC (91)
- KM80TS (103)
- VDI30 (7)
- VDI40 (22)
- VDI50 (22)
- VDI60 (10)
Hinterer Durchmesser
Hinterer Durchmesser
- 10.0 mm(1)
- 12.0 mm(20)
- 12.7 mm(2)
- 14.0 mm(1)
- 15.875 mm(2)
- 16.0 mm(56)
- 17.0 mm(1)
- 18.0 mm(1)
- 19.0 mm(1)
- 19.05 mm(5)
- 20.0 mm(78)
- 22.0 mm(1)
- 24.0 mm(1)
- 25.0 mm(61)
- 25.4 mm(3)
- 30.0 mm(7)
- 31.75 mm(5)
- 32.0 mm(152)
- 38.1 mm(12)
- 40.0 mm(364)
- 44.45 mm(1)
- 47.0 mm(2)
- 50.0 mm(327)
- 50.8 mm(6)
- 51.0 mm(1)
- 58.294 mm(2)
- 60.0 mm(16)
- 61.96 mm(2)
- 62.0 mm(2)
- 63.0 mm(552)
- 63.5 mm(7)
- 71.96 mm(1)
- 74.0 mm(2)
- 76.2 mm(2)
- 77.962 mm(1)
- 80.0 mm(234)
- 85.0 mm(2)
- 92.0 mm(1)
- 100.0 mm(1)
- 108.035 mm(2)
- 150.0 mm(2)
bis
Hinterer Durchmesser
Hinterer Durchmesser
- 0.3937 in(1)
- 0.5 in(2)
- 0.5512 in(1)
- 0.625 in(2)
- 0.6299 in(2)
- 0.6693 in(1)
- 0.7087 in(1)
- 0.748 in(1)
- 0.75 in(5)
- 0.7874 in(13)
- 0.8661 in(1)
- 0.9449 in(1)
- 0.9843 in(4)
- 1.0 in(3)
- 1.1811 in(7)
- 1.25 in(5)
- 1.2598 in(42)
- 1.5 in(12)
- 1.5748 in(104)
- 1.75 in(1)
- 1.8504 in(2)
- 1.9685 in(108)
- 2.0 in(6)
- 2.007 in(1)
- 2.295 in(1)
- 2.2955 in(1)
- 2.362 in(1)
- 2.3622 in(15)
- 2.4394 in(2)
- 2.4409 in(2)
- 2.478 in(28)
- 2.48 in(2)
- 2.4803 in(255)
- 2.5 in(7)
- 2.8331 in(1)
- 2.9134 in(2)
- 3.0 in(2)
- 3.069 in(1)
- 3.1496 in(131)
- 3.3465 in(2)
- 3.622 in(1)
- 3.937 in(1)
- 4.2533 in(2)
- 5.9055 in(2)
bis
Schafthöhe
Schafthöhe
- 0.0 in(4)
bis
Schafthöhe
Schafthöhe
- 0.0 mm(4)
bis
No filters matching ""
