O.D. and I.D. Turning
Outside Diameter (OD) and Inside Diameter (ID) turning tools are engineered to drive efficiency and productivity in your metal-cutting operations. In OD turning, the outer surface of a workpiece is machined while in ID turning, the inner diameter of a workpiece is machined. WIDIA High-performance indexable inserts and toolholders are essential components offering advanced geometries, coatings, and materials to provide optimal chip control, surface finish quality, and tool life. WIDIA’s General indexable inserts offer flexibility and cost-efficiency. Additionally, boring bars are available to enlarge existing holes or create internal features with high precision and accuracy. OD and ID turning operations are essential for creating shafts, bushings, cylinders, and other cylindrical components with tight tolerances and superior surface finishes. With the right combination of high-performance inserts, tool holders, boring bars, and specialty turning tools, you can achieve exceptional results for your machining applications.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (2437)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2414)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2414)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(2437)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2423)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(2423)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2400)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2400)
- M Stainless Steel (1645)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1645)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1628)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1628)
- K Cast Iron (1836)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1829)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1816)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1786)
- N Non-Ferrous Materials (1163)
- N1Wrought Aluminum (1144)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1160)
- N3High-Silicon Aluminum Alloys Si >12.2%(671)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (922)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (574)
- N6Carbon, Graphite Composites, CFRP (552)
- N7MMC's (522)
- S High-Temp Alloys (1260)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1259)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1259)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1245)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1050)
- H Hardened Materials (673)
- H1Hardened Materials 44-48 HRC(673)
- H2Hardened Materials 48-55 HRC(673)
- H3Hardened Materials 56-60 HRC(673)
- H4Hardened Materials >60 HRC(673)
Select All Star
- CN (147)
- DE (788)
- GB (98)
- IN (436)
- SG (315)
- US (486)
Applications
Applications
Back Boring (54)
Boring (20)
CRT Profiling (16)
Chamfer Turning (3)
Facing (308)
Grooving (4)
ID Facing (29)
ID Grooving (3)
ID Thread Turning (5)
Multiple Direction Cutting (741)
OD Thread Turning (3)
Turning (430)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (1357)
- Lightly Interrupted Cut (2166)
- Smooth Cut (2575)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 0.0 (1)
- 45.0 (55)
- 50.0 (5)
- 53.0 (1)
- 60.0 (13)
- 62.5 (9)
- 63.0 (7)
- 67.5 (5)
- 72.5 (10)
- 75.0 (63)
- 85.0 (2)
- 90.0 (176)
- 92.0 (16)
- 92.5 (3)
- 93.0 (201)
- 95.0 (366)
- 97.0 (11)
- 107.5 (35)
- 117.5 (5)
to
Connection Style
Connection Style
- Boring Bar Shank (503)
- Toolholder (422)
- WHISTLE NOTCH 5° A/B BoringBar (32)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (3)
- 1.0 (625)
- 2.0 (989)
- 3.0 (510)
- 4.0 (1026)
- 6.0 (495)
- 8.0 (708)
to
Over All Length [L]
Over All Length [L]
- 26.67 mm(1)
- 32.0 mm(4)
- 32.29 mm(1)
- 33.02 mm(1)
- 39.37 mm(1)
- 40.0 mm(4)
- 50.0 mm(1)
- 50.08 mm(2)
- 50.09 mm(2)
- 50.75 mm(1)
- 52.22 mm(1)
- 54.21 mm(1)
- 55.0 mm(6)
- 55.32 mm(2)
- 56.02 mm(1)
- 58.06 mm(1)
- 60.0 mm(1)
- 60.32 mm(2)
- 63.0 mm(3)
- 63.5 mm(26)
- 69.85 mm(11)
- 69.86 mm(1)
- 70.0 mm(9)
- 72.2 mm(1)
- 76.2 mm(15)
- 79.37 mm(1)
- 80.0 mm(10)
- 85.72 mm(3)
- 85.73 mm(1)
- 88.9 mm(11)
- 95.25 mm(9)
- 100.0 mm(23)
- 100.33 mm(3)
- 100.58 mm(2)
- 101.51 mm(2)
- 101.59 mm(1)
- 101.6 mm(54)
- 107.95 mm(5)
- 110.0 mm(5)
- 114.3 mm(22)
- 120.65 mm(2)
- 123.25 mm(1)
- 124.25 mm(1)
- 124.75 mm(1)
- 125.0 mm(91)
- 126.91 mm(1)
- 127.0 mm(17)
- 140.0 mm(1)
- 149.25 mm(1)
- 149.75 mm(1)
- 150.0 mm(116)
- 151.25 mm(2)
- 152.0 mm(1)
- 152.15 mm(2)
- 152.4 mm(126)
- 154.2 mm(1)
- 170.0 mm(73)
- 171.0 mm(1)
- 177.8 mm(4)
- 180.0 mm(13)
- 200.0 mm(44)
- 203.2 mm(23)
- 250.0 mm(59)
- 251.45 mm(2)
- 254.0 mm(30)
- 300.0 mm(40)
- 304.8 mm(10)
- 304.81 mm(1)
- 350.0 mm(13)
- 355.6 mm(11)
- 400.0 mm(4)
- 406.4 mm(6)
to
Availability
gsaApproval
gsaApproval
Corner Radius
Corner Radius
- 0.05 mm(100)
- 0.1 mm(289)
- 0.125 mm(4)
- 0.175 mm(274)
- 0.2 mm(459)
- 0.375 mm(257)
- 0.4 mm(1220)
- 0.6 mm(31)
- 0.775 mm(76)
- 0.8 mm(1642)
- 0.95 mm(1)
- 1.2 mm(939)
- 1.6 mm(422)
- 2.0 mm(3)
- 2.375 mm(2)
- 2.4 mm(77)
- 3.0 mm(9)
- 3.175 mm(2)
- 4.0 mm(15)
- 4.775 mm(9)
- 5.0 mm(9)
- 6.0 mm(11)
- 6.35 mm(32)
- 8.0 mm(6)
- 9.0 mm(11)
- 9.525 mm(4)
- 10.0 mm(18)
- 12.0 mm(11)
- 12.5 mm(3)
- 13.0 mm(12)
- 15.0 mm(12)
- 16.0 mm(2)
- 18.0 mm(12)
- 20.0 mm(12)
- 22.0 mm(12)
- 25.0 mm(12)
- 27.0 mm(12)
- 28.0 mm(11)
- 30.0 mm(12)
- 35.0 mm(12)
- 40.0 mm(12)
- 45.0 mm(12)
- 50.0 mm(12)
- 55.0 mm(11)
- 60.0 mm(12)
- 65.0 mm(11)
- 70.0 mm(1)
- 75.0 mm(11)
- 80.0 mm(12)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(2498)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- AT15S (1)
- C25 (158)
- C3 (36)
- CBN6 (40)
- CG5 (332)
- CG55 (20)
- CG6 (231)
- CM1 (258)
- CW2015 (311)
- CW3020 (27)
- CW5025 (215)
- HCK10 (60)
- HWK10 (10)
- PB100 (97)
- PB250 (13)
- THM (482)
- THM X (1)
- THM-F (5)
- THM-X (297)
- THMF-X (123)
- TN10P (457)
- TN10U (459)
- TN15M (309)
- TN15U (246)
- TN2000 (450)
- TN20K (527)
- TN20P (622)
- TN30M (422)
- TN30P (269)
- TN4000 (389)
- TN6010 (186)
- TN6025 (80)
- TN6540 (1)
- TN7 (195)
- TTM08 (7)
- TTM09 (19)
- TTMS (5)
- TTR (97)
- TTR-X (22)
- TTS (179)
- W00160 (3)
- W00162 (16)
- WBH10P (252)
- WBH10U (147)
- WBH20P (389)
- WBH30P (260)
- WBH40C (1)
- WBK40U (32)
- WBK45U (27)
- WDN00U (154)
- WDN10U (35)
- WDN15U (3)
- WDN25U (473)
- WK05CT (426)
- WK15CT (436)
- WK20CT (935)
- WM15CT (530)
- WM25CT (791)
- WM35CT (366)
- WP05CT (101)
- WP15CT (863)
- WP20TT (98)
- WP25CT (925)
- WP35CM (1)
- WP35CT (513)
- WS10PT (598)
- WS25PT (553)
- WU05PT (184)
- WU10HT (585)
- WU10PT (487)
- WU25PT (521)
Hand Of Tool
Hand Of Tool
- L (295)
- N (64)
- R (598)
Wiper Insert
Wiper Insert
- N (3354)
- Y (190)
F Dimension
F Dimension
- 0.0 mm(4)
- 0.61 mm(1)
- 0.66 mm(5)
- 1.041 mm(4)
- 1.067 mm(1)
- 1.168 mm(1)
- 1.4 mm(1)
- 1.448 mm(5)
- 1.549 mm(1)
- 1.78 mm(3)
- 1.854 mm(3)
- 1.93 mm(3)
- 2.235 mm(3)
- 2.41 mm(11)
- 2.64 mm(17)
- 2.82 mm(4)
- 2.95 mm(8)
- 2.97 mm(2)
- 3.02 mm(5)
- 3.048 mm(2)
- 3.1 mm(5)
- 3.12 mm(1)
- 3.18 mm(2)
- 3.2 mm(10)
- 3.4 mm(2)
- 3.43 mm(1)
- 3.61 mm(1)
- 3.63 mm(1)
- 3.68 mm(14)
- 3.7 mm(1)
- 3.71 mm(2)
- 3.73 mm(3)
- 3.734 mm(1)
- 3.835 mm(1)
- 3.86 mm(4)
- 3.91 mm(2)
- 3.94 mm(2)
- 3.96 mm(15)
- 4.0 mm(1)
- 4.27 mm(1)
- 4.42 mm(3)
- 4.44 mm(2)
- 4.5 mm(4)
- 4.7 mm(6)
- 4.75 mm(15)
- 4.8 mm(1)
- 5.0 mm(2)
- 5.2 mm(1)
- 5.3 mm(2)
- 5.36 mm(3)
- 5.54 mm(2)
- 5.59 mm(7)
- 5.61 mm(9)
- 5.66 mm(1)
- 5.79 mm(5)
- 5.875 mm(2)
- 5.94 mm(2)
- 5.99 mm(2)
- 6.0 mm(9)
- 6.35 mm(8)
- 6.38 mm(4)
- 6.55 mm(1)
- 6.6 mm(2)
- 6.81 mm(1)
- 6.875 mm(1)
- 6.93 mm(3)
- 7.0 mm(15)
- 7.01 mm(1)
- 7.07 mm(2)
- 7.11 mm(1)
- 7.29 mm(1)
- 7.52 mm(10)
- 7.54 mm(1)
- 7.92 mm(6)
- 7.925 mm(7)
- 8.0 mm(1)
- 8.13 mm(2)
- 8.59 mm(2)
- 8.61 mm(3)
- 8.64 mm(1)
- 8.71 mm(1)
- 8.76 mm(2)
- 8.89 mm(1)
- 8.97 mm(4)
- 9.0 mm(13)
- 9.5 mm(5)
- 9.52 mm(3)
- 9.65 mm(3)
- 9.959 mm(1)
- 9.98 mm(7)
- 10.0 mm(8)
- 10.31 mm(1)
- 10.312 mm(4)
- 10.34 mm(2)
- 11.0 mm(24)
- 11.1 mm(3)
- 11.68 mm(7)
- 12.0 mm(9)
- 12.25 mm(1)
- 12.5 mm(18)
- 12.6 mm(1)
- 12.62 mm(1)
- 12.7 mm(17)
- 12.875 mm(1)
- 13.0 mm(27)
- 13.92 mm(1)
- 14.0 mm(1)
- 14.27 mm(1)
- 14.275 mm(4)
- 14.86 mm(4)
- 15.0 mm(2)
- 15.5 mm(1)
- 15.875 mm(3)
- 15.88 mm(1)
- 16.0 mm(10)
- 16.255 mm(1)
- 16.256 mm(3)
- 16.26 mm(2)
- 16.5 mm(1)
- 17.0 mm(39)
- 17.5 mm(1)
- 18.0 mm(1)
- 18.5 mm(1)
- 19.05 mm(5)
- 19.43 mm(4)
- 19.431 mm(1)
- 19.5 mm(1)
- 20.0 mm(20)
- 22.0 mm(36)
- 22.606 mm(1)
- 22.61 mm(3)
- 23.16 mm(2)
- 25.0 mm(64)
- 25.4 mm(18)
- 27.0 mm(27)
- 28.448 mm(1)
- 28.65 mm(1)
- 30.0 mm(1)
- 31.75 mm(38)
- 32.0 mm(101)
- 32.54 mm(3)
- 33.55 mm(1)
- 34.798 mm(1)
- 35.0 mm(17)
- 38.1 mm(12)
- 38.89 mm(2)
- 40.0 mm(32)
- 43.0 mm(1)
- 47.02 mm(1)
- 50.0 mm(12)
- 50.8 mm(5)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 1.575 mm(5)
- 2.388 mm(5)
- 2.794 mm(1)
- 3.175 mm(5)
- 3.556 mm(1)
- 3.962 mm(3)
- 4.445 mm(3)
- 4.57 mm(11)
- 4.75 mm(3)
- 5.18 mm(7)
- 5.182 mm(1)
- 5.28 mm(9)
- 5.54 mm(4)
- 5.69 mm(2)
- 5.78 mm(1)
- 5.79 mm(6)
- 5.791 mm(1)
- 5.94 mm(11)
- 6.2 mm(1)
- 6.35 mm(2)
- 6.6 mm(2)
- 6.78 mm(1)
- 6.91 mm(2)
- 6.98 mm(10)
- 7.06 mm(3)
- 7.08 mm(2)
- 7.09 mm(2)
- 7.24 mm(16)
- 7.42 mm(4)
- 7.52 mm(15)
- 7.92 mm(2)
- 7.925 mm(1)
- 8.0 mm(3)
- 8.18 mm(2)
- 8.61 mm(1)
- 8.81 mm(3)
- 9.04 mm(6)
- 9.09 mm(15)
- 9.14 mm(7)
- 9.16 mm(1)
- 9.98 mm(1)
- 10.0 mm(2)
- 10.01 mm(1)
- 10.16 mm(2)
- 10.34 mm(1)
- 10.49 mm(1)
- 10.5 mm(2)
- 10.67 mm(1)
- 10.68 mm(1)
- 10.74 mm(4)
- 11.0 mm(8)
- 11.13 mm(13)
- 11.15 mm(1)
- 11.38 mm(1)
- 11.89 mm(1)
- 12.14 mm(1)
- 12.19 mm(5)
- 12.192 mm(2)
- 12.22 mm(2)
- 12.5 mm(1)
- 12.9 mm(1)
- 13.0 mm(16)
- 13.08 mm(4)
- 13.16 mm(1)
- 13.34 mm(2)
- 13.67 mm(3)
- 13.72 mm(2)
- 13.84 mm(1)
- 14.3 mm(10)
- 15.24 mm(10)
- 15.32 mm(1)
- 15.37 mm(1)
- 15.39 mm(1)
- 15.88 mm(1)
- 16.0 mm(15)
- 16.26 mm(2)
- 16.38 mm(3)
- 16.967 mm(1)
- 16.97 mm(2)
- 17.02 mm(1)
- 17.09 mm(2)
- 17.25 mm(1)
- 17.27 mm(3)
- 17.48 mm(1)
- 18.29 mm(7)
- 18.54 mm(1)
- 18.542 mm(1)
- 19.05 mm(1)
- 19.43 mm(1)
- 19.558 mm(3)
- 19.56 mm(2)
- 20.0 mm(21)
- 20.24 mm(2)
- 21.59 mm(7)
- 22.0 mm(2)
- 23.62 mm(5)
- 23.622 mm(5)
- 23.75 mm(1)
- 24.61 mm(3)
- 24.89 mm(1)
- 24.892 mm(4)
- 25.0 mm(21)
- 27.0 mm(4)
- 27.94 mm(4)
- 30.48 mm(5)
- 30.988 mm(1)
- 32.0 mm(32)
- 33.02 mm(3)
- 35.0 mm(3)
- 37.0 mm(1)
- 37.338 mm(1)
- 37.34 mm(4)
- 40.0 mm(24)
- 42.0 mm(2)
- 43.307 mm(1)
- 44.7 mm(3)
- 44.704 mm(1)
- 45.0 mm(1)
- 48.0 mm(1)
- 50.0 mm(14)
- 50.8 mm(1)
- 52.0 mm(1)
- 53.0 mm(4)
- 55.0 mm(1)
- 60.96 mm(3)
- 63.0 mm(6)
- 63.5 mm(1)
- 76.96 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.575 mm(5)
- 2.388 mm(5)
- 2.794 mm(1)
- 3.175 mm(5)
- 3.556 mm(1)
- 3.962 mm(3)
- 4.445 mm(3)
- 4.57 mm(11)
- 4.75 mm(3)
- 5.18 mm(7)
- 5.182 mm(1)
- 5.28 mm(9)
- 5.54 mm(4)
- 5.69 mm(2)
- 5.78 mm(1)
- 5.79 mm(6)
- 5.791 mm(1)
- 5.94 mm(11)
- 6.2 mm(1)
- 6.35 mm(2)
- 6.6 mm(2)
- 6.78 mm(1)
- 6.91 mm(2)
- 6.98 mm(10)
- 7.06 mm(3)
- 7.08 mm(2)
- 7.09 mm(2)
- 7.24 mm(16)
- 7.42 mm(4)
- 7.52 mm(15)
- 7.92 mm(2)
- 7.925 mm(1)
- 8.0 mm(3)
- 8.18 mm(2)
- 8.61 mm(1)
- 8.81 mm(3)
- 9.04 mm(6)
- 9.09 mm(15)
- 9.14 mm(7)
- 9.16 mm(1)
- 9.98 mm(1)
- 10.0 mm(2)
- 10.01 mm(1)
- 10.16 mm(2)
- 10.34 mm(1)
- 10.49 mm(1)
- 10.5 mm(2)
- 10.67 mm(1)
- 10.68 mm(1)
- 10.74 mm(4)
- 11.0 mm(8)
- 11.13 mm(13)
- 11.15 mm(1)
- 11.38 mm(1)
- 11.89 mm(1)
- 12.14 mm(1)
- 12.19 mm(5)
- 12.192 mm(2)
- 12.22 mm(2)
- 12.5 mm(1)
- 12.9 mm(1)
- 13.0 mm(16)
- 13.08 mm(4)
- 13.16 mm(1)
- 13.34 mm(2)
- 13.67 mm(3)
- 13.72 mm(2)
- 13.84 mm(1)
- 14.3 mm(10)
- 15.24 mm(10)
- 15.32 mm(1)
- 15.37 mm(1)
- 15.39 mm(1)
- 15.88 mm(1)
- 16.0 mm(15)
- 16.26 mm(2)
- 16.38 mm(3)
- 16.967 mm(1)
- 16.97 mm(2)
- 17.02 mm(1)
- 17.09 mm(2)
- 17.25 mm(1)
- 17.27 mm(3)
- 17.48 mm(1)
- 18.29 mm(7)
- 18.54 mm(1)
- 18.542 mm(1)
- 19.05 mm(1)
- 19.43 mm(1)
- 19.558 mm(3)
- 19.56 mm(2)
- 20.0 mm(21)
- 20.24 mm(2)
- 21.59 mm(7)
- 22.0 mm(2)
- 23.62 mm(5)
- 23.622 mm(5)
- 23.75 mm(1)
- 24.61 mm(3)
- 24.89 mm(1)
- 24.892 mm(4)
- 25.0 mm(24)
- 27.0 mm(4)
- 27.94 mm(4)
- 30.48 mm(5)
- 30.988 mm(1)
- 32.0 mm(32)
- 33.02 mm(3)
- 35.0 mm(3)
- 37.0 mm(1)
- 37.338 mm(1)
- 37.34 mm(4)
- 40.0 mm(31)
- 42.0 mm(2)
- 43.307 mm(1)
- 44.7 mm(3)
- 44.704 mm(1)
- 45.0 mm(1)
- 48.0 mm(1)
- 50.0 mm(25)
- 50.8 mm(1)
- 52.0 mm(1)
- 53.0 mm(4)
- 55.0 mm(1)
- 60.0 mm(3)
- 60.96 mm(3)
- 63.0 mm(6)
- 63.5 mm(1)
- 70.0 mm(3)
- 76.96 mm(2)
to
Cutting Direction
Cutting Direction
- B (388)
- E (261)
- P (27)
- S (281)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (321)
- DOUBLE POSITIVE (1)
- NEGATIVE-ZERO (239)
- NEUTRAL (ZERO) (183)
- POSITIVE-NEGATIVE (3)
- POSITIVE-ZERO (181)
Maximum Bore Depth
Maximum Bore Depth
- 4.75 mm(1)
- 5.41 mm(2)
- 7.137 mm(3)
- 7.925 mm(3)
- 9.525 mm(4)
- 12.3 mm(1)
- 12.7 mm(18)
- 15.24 mm(1)
- 15.875 mm(2)
- 16.0 mm(2)
- 19.04 mm(1)
- 19.048 mm(7)
- 19.05 mm(9)
- 20.0 mm(3)
- 20.955 mm(1)
- 22.22 mm(3)
- 22.225 mm(2)
- 22.23 mm(1)
- 22.86 mm(2)
- 23.76 mm(3)
- 24.0 mm(4)
- 25.39 mm(1)
- 25.4 mm(27)
- 25.72 mm(1)
- 28.56 mm(4)
- 28.57 mm(1)
- 28.572 mm(10)
- 28.578 mm(1)
- 28.58 mm(3)
- 30.0 mm(2)
- 31.748 mm(5)
- 31.75 mm(16)
- 31.76 mm(1)
- 32.0 mm(4)
- 35.0 mm(3)
- 36.0 mm(9)
- 38.04 mm(6)
- 38.08 mm(9)
- 38.1 mm(29)
- 38.12 mm(3)
- 40.0 mm(16)
- 47.55 mm(1)
- 47.58 mm(6)
- 47.61 mm(1)
- 47.62 mm(3)
- 47.622 mm(6)
- 47.628 mm(1)
- 48.0 mm(21)
- 50.8 mm(19)
- 53.975 mm(1)
- 57.12 mm(8)
- 57.15 mm(3)
- 60.0 mm(5)
- 63.48 mm(4)
- 63.5 mm(7)
- 63.52 mm(4)
- 64.0 mm(16)
- 72.0 mm(9)
- 76.2 mm(34)
- 76.4 mm(1)
- 80.0 mm(14)
- 95.22 mm(7)
- 95.25 mm(1)
- 96.0 mm(10)
- 100.0 mm(29)
- 101.6 mm(9)
- 114.24 mm(3)
- 114.3 mm(2)
- 120.0 mm(11)
- 126.8 mm(2)
- 127.0 mm(4)
- 128.0 mm(28)
- 150.0 mm(6)
- 152.4 mm(8)
- 160.0 mm(17)
- 192.0 mm(1)
- 200.0 mm(6)
- 203.2 mm(4)
- 254.0 mm(2)
to
Boring Bar Material
Boring Bar Material
- C (184)
- S (324)
Front-End
Clamp Style
Clamp Style
- C (32)
- D (193)
- M (42)
- N (3)
- P (135)
- S (514)
Cutting Width
Cutting Width
- 0.635 mm(1)
- 0.762 mm(5)
- 1.016 mm(1)
- 1.27 mm(1)
- 1.524 mm(3)
to
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (1035)
- D-DIAMOND/RHOMBIC 55 (550)
- E-DIAMOND/RHOMBIC 75 (1)
- G-RHOMBIC 45 (44)
- GROOVING/CUTOFF MISC (6)
- L-RECTANGLE 90 (8)
- N/K-PARALLELOGRAM 55 (2)
- R-ROUND (106)
- S-SQUARE 90 (442)
- T-TRIANGLE 60 (705)
- THREADING (6)
- V-DIAMOND/RHOMBIC 35 (258)
- W-TRIGON 80 (262)
Cartridge Size
Cartridge Size
- 08 - mm of Cutting Height (3)
- 10 - mm of Cutting Height (7)
- 12 - mm of Cutting Height (11)
- 16 - mm of Cutting Height (3)
- 20 - mm of Cutting Height (3)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.432 mm(1)
- 0.711 mm(1)
- 0.762 mm(1)
- 0.813 mm(2)
- 0.889 mm(1)
- 1.016 mm(1)
- 1.02 mm(2)
- 1.27 mm(2)
- 1.52 mm(2)
- 1.57 mm(1)
- 1.575 mm(1)
- 1.91 mm(1)
- 1.981 mm(1)
- 2.27 mm(2)
- 2.28 mm(1)
- 2.29 mm(3)
- 2.31 mm(3)
- 2.32 mm(1)
- 2.36 mm(3)
- 2.49 mm(1)
- 2.59 mm(1)
- 2.81 mm(1)
- 2.94 mm(1)
- 3.02 mm(2)
- 3.04 mm(2)
- 3.05 mm(2)
- 3.07 mm(3)
- 3.17 mm(1)
- 3.18 mm(4)
- 3.3 mm(2)
- 3.7 mm(1)
- 3.73 mm(1)
- 4.27 mm(1)
- 4.655 mm(1)
- 4.75 mm(1)
- 7.5 mm(2)
- 10.0 mm(2)
- 13.5 mm(3)
- 16.0 mm(2)
- 16.5 mm(2)
- 19.0 mm(1)
- 19.7 mm(2)
- 20.0 mm(2)
- 21.0 mm(3)
- 25.0 mm(3)
- 28.0 mm(1)
- 29.0 mm(2)
- 32.0 mm(1)
- 35.0 mm(4)
- 38.0 mm(1)
to
Thread TPI
Thread TPI
- 24.0 (2)
- 48.0 (1)
to
Thread Pitch
Thread Pitch
- 1.0 mm(1)
- 2.5 mm(2)
to
Insert Geometry
Shape
Shape
- C-DIAMOND/RHOMBIC 80 (721)
- D-DIAMOND/RHOMBIC 55 (386)
- E-DIAMOND/RHOMBIC 75 (1)
- G-RHOMBIC 45 (17)
- GROOVING/CUTOFF MISC (4)
- L-RECTANGLE 90 (8)
- R-ROUND (80)
- S-SQUARE 90 (349)
- T-TRIANGLE 60 (518)
- THREADING (3)
- V-DIAMOND/RHOMBIC 35 (190)
- W-TRIGON 80 (198)
Insert IC Size
Insert IC Size
- 3.967 mm(2)
- 3.969 mm(1)
- 3.975 mm(37)
- 4.075 mm(32)
- 4.15 mm(1)
- 4.775 mm(10)
- 4.825 mm(3)
- 6.0 mm(6)
- 6.35 mm(228)
- 7.15 mm(12)
- 7.95 mm(2)
- 8.0 mm(5)
- 9.525 mm(786)
- 9.8 mm(1)
- 10.0 mm(8)
- 12.0 mm(9)
- 12.7 mm(971)
- 15.875 mm(137)
- 16.0 mm(6)
- 19.05 mm(170)
- 20.0 mm(7)
- 25.0 mm(3)
- 25.4 mm(25)
- 32.0 mm(2)
to
Cutting Edge Length
Cutting Edge Length
- 3.258 mm(4)
- 3.26 mm(1)
- 4.03 mm(30)
- 4.057 mm(1)
- 4.344 mm(4)
- 4.836 mm(1)
- 5.61 mm(3)
- 5.611 mm(3)
- 5.76 mm(4)
- 6.448 mm(57)
- 6.45 mm(18)
- 6.472 mm(2)
- 6.515 mm(46)
- 6.73 mm(4)
- 6.83 mm(3)
- 7.036 mm(5)
- 7.039 mm(1)
- 7.04 mm(22)
- 7.18 mm(1)
- 7.752 mm(33)
- 8.06 mm(2)
- 8.687 mm(142)
- 8.69 mm(1)
- 9.525 mm(39)
- 9.67 mm(1)
- 9.672 mm(141)
- 10.999 mm(9)
- 11.0 mm(85)
- 11.071 mm(14)
- 11.628 mm(118)
- 11.63 mm(5)
- 12.208 mm(1)
- 12.45 mm(2)
- 12.455 mm(10)
- 12.7 mm(154)
- 12.896 mm(308)
- 12.9 mm(4)
- 13.148 mm(1)
- 13.891 mm(5)
- 15.5 mm(1)
- 15.504 mm(230)
- 15.875 mm(56)
- 16.12 mm(62)
- 16.498 mm(59)
- 16.5 mm(210)
- 16.51 mm(2)
- 16.606 mm(151)
- 16.98 mm(1)
- 19.05 mm(82)
- 19.344 mm(84)
- 19.38 mm(2)
- 21.997 mm(20)
- 22.0 mm(77)
- 22.142 mm(13)
- 25.4 mm(21)
- 25.792 mm(4)
- 27.496 mm(17)
- 30.0 mm(3)
- 33.0 mm(4)
- 40.0 mm(1)
to
Chip Breaker CBMD
Chip Breaker CBMD
- 04 (6)
- 13 (2)
- 16 (1)
- 18 (1)
- 1P (138)
- 22 (3)
- 2P (40)
- 3 (1)
- 41 (1)
- 43 (3)
- 4P (23)
- 5 (16)
- 65 (50)
- 6P (52)
- 7N (41)
- 8 (12)
- AL (34)
- AL3 (2)
- B (11)
- CT (1)
- EMT (1)
- EN95 (1)
- FF (39)
- FP (103)
- FS (47)
- FW (7)
- HP (4)
- LF (20)
- ML (66)
- MP (74)
- MR (82)
- MS (94)
- MU (109)
- MW (11)
- N (2)
- RH (152)
- RU (42)
- SR (17)
- T (4)
- UF (55)
- UM (64)
- UR (229)
Cutting Tool Material
Cutting Tool Material
- B H (207)
- B L (470)
- C A (325)
- C N (261)
- D P (523)
- H T (293)
- H W (3168)
Tolerance Class
Tolerance Class
- G (312)
- H (144)
- M (1937)
- U (69)
Back-End
Connection Type
Connection Type
- BORING BAR (503)
- CYLINDRICAL (32)
- SQUARE SHANK (422)
Back-End Diameter
Back-End Diameter
- 3.96 mm(6)
- 3.962 mm(23)
- 4.0 mm(3)
- 4.76 mm(5)
- 4.762 mm(19)
- 4.763 mm(1)
- 5.0 mm(5)
- 6.0 mm(12)
- 6.34 mm(6)
- 6.35 mm(16)
- 7.925 mm(1)
- 7.93 mm(6)
- 7.932 mm(6)
- 7.937 mm(11)
- 7.938 mm(1)
- 8.0 mm(16)
- 9.52 mm(20)
- 9.524 mm(1)
- 9.525 mm(12)
- 9.53 mm(3)
- 10.0 mm(23)
- 12.0 mm(21)
- 12.7 mm(72)
- 15.87 mm(38)
- 15.875 mm(6)
- 15.88 mm(5)
- 16.0 mm(28)
- 19.04 mm(3)
- 19.045 mm(1)
- 19.05 mm(31)
- 19.1 mm(1)
- 20.0 mm(24)
- 25.0 mm(35)
- 25.4 mm(20)
- 30.0 mm(1)
- 31.7 mm(2)
- 31.75 mm(4)
- 32.0 mm(29)
- 38.1 mm(5)
- 40.0 mm(17)
- 50.0 mm(6)
- 50.8 mm(4)
- 63.5 mm(2)
to
Shank Height
Shank Height
- 7.0 mm(1)
- 8.0 mm(2)
- 9.0 mm(6)
- 9.52 mm(1)
- 10.0 mm(4)
- 11.0 mm(4)
- 12.0 mm(10)
- 12.7 mm(6)
- 15.0 mm(3)
- 15.88 mm(2)
- 16.0 mm(23)
- 18.0 mm(4)
- 19.05 mm(19)
- 20.0 mm(78)
- 23.0 mm(3)
- 23.82 mm(1)
- 25.0 mm(110)
- 25.03 mm(1)
- 25.4 mm(45)
- 30.0 mm(5)
- 31.75 mm(18)
- 32.0 mm(76)
- 38.1 mm(6)
- 38.82 mm(1)
- 40.0 mm(20)
- 46.96 mm(2)
- 50.0 mm(1)
to
Shank Width
Shank Width
- 8.0 mm(2)
- 9.52 mm(1)
- 10.0 mm(5)
- 11.5 mm(2)
- 12.0 mm(10)
- 12.7 mm(6)
- 15.0 mm(2)
- 15.88 mm(2)
- 16.0 mm(23)
- 18.5 mm(3)
- 19.05 mm(19)
- 20.0 mm(78)
- 21.96 mm(1)
- 23.0 mm(2)
- 25.0 mm(147)
- 25.4 mm(49)
- 30.0 mm(4)
- 31.75 mm(14)
- 32.0 mm(41)
- 36.96 mm(1)
- 38.1 mm(6)
- 40.0 mm(18)
- 46.96 mm(2)
- 50.0 mm(1)
to
No filters matching ""
