Kendex™ Negative
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- K Cast Iron (2)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(2)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2)
- N Non-Ferrous Materials (2)
- N1Wrought Aluminum (2)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (2)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2)
- N7MMC's (2)
- S High-Temp Alloys (2)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(2)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(2)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(2)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2)
- H Hardened Materials (2)
- H1Hardened Materials 44-48 HRC(2)
- H2Hardened Materials 48-55 HRC(2)
- H3Hardened Materials 56-60 HRC(2)
- H4Hardened Materials >60 HRC(2)
Applications
Applications
Facing (2)
Multiple Direction Cutting (2)
Turning (2)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (2)
- Lightly Interrupted Cut (2)
- Smooth Cut (2)
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (2)
- CW3020 (2)
- CW5025 (2)
- K313 (2)
- KY1540 (2)
- KY3500 (2)
- KY4300 (2)
- KY4400 (2)
- KYHK15B (2)
- KYS25 (2)
- KYS30 (2)
- MC3 (2)
Hand Of Tool
Hand Of Tool
- L (1)
- R (1)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- C A (2)
- C N (2)
- H W (2)
No filters matching ""
