Advances Inch (2020)
Advances Metric (2020)
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (418)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(418)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(418)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(418)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(418)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(418)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(418)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(418)
- M Stainless Steel (427)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(427)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(427)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(427)
- K Cast Iron (377)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(377)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(377)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(377)
- N Non-Ferrous Materials (419)
- N1Wrought Aluminum (419)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(419)
- N3High-Silicon Aluminum Alloys Si >12.2%(419)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (419)
- N6Carbon, Graphite Composites, CFRP (419)
- S High-Temp Alloys (427)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(427)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(427)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(427)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(427)
- H Hardened Materials (117)
- H1Hardened Materials 44-48 HRC(117)
- H2Hardened Materials 48-55 HRC(117)
Select All Star
- CN (37)
- DE (55)
- GB (18)
- IN (2)
- SG (53)
- US (94)
Applications
Applications
Back Boring (54)
Boring (9)
Chamfer Turning (36)
Cut-Off (316)
Deep Grooving (36)
Face Grooving (75)
Facing (124)
Grooving (174)
ID Facing (86)
ID Grooving (95)
Multiple Direction Cutting (20)
Plunge Turning (83)
Profiling (124)
Turning (144)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (385)
- Lightly Interrupted Cut (409)
- Smooth Cut (409)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (273)
to
Connection Style
Connection Style
- Boring Bar Shank (32)
- Cutoff Support Blade A1-A3 (15)
- Toolholder (180)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (383)
to
Over All Length [L]
Over All Length [L]
- 47.746 mm(5)
- 47.75 mm(5)
- 49.62 mm(4)
- 51.746 mm(3)
- 51.75 mm(1)
- 57.746 mm(3)
- 57.75 mm(1)
- 58.42 mm(3)
- 58.425 mm(1)
- 59.62 mm(4)
- 61.746 mm(1)
- 61.75 mm(1)
- 64.77 mm(8)
- 65.62 mm(2)
- 67.746 mm(3)
- 67.75 mm(1)
- 86.0 mm(1)
- 90.25 mm(3)
- 100.0 mm(1)
- 108.46 mm(2)
- 110.0 mm(2)
- 110.25 mm(4)
- 110.251 mm(1)
- 114.3 mm(36)
- 121.16 mm(2)
- 125.0 mm(28)
- 127.0 mm(2)
- 127.5 mm(10)
- 136.91 mm(2)
- 138.75 mm(2)
- 139.9 mm(6)
- 143.26 mm(3)
- 146.56 mm(1)
- 150.0 mm(30)
- 150.25 mm(8)
- 151.4 mm(6)
- 151.76 mm(3)
- 152.4 mm(60)
- 152.5 mm(8)
- 158.75 mm(2)
- 170.0 mm(22)
- 170.25 mm(2)
- 177.8 mm(14)
- 180.0 mm(4)
- 200.0 mm(12)
- 203.2 mm(6)
- 260.0 mm(1)
to
Availability
gsaApproval
gsaApproval
Corner Radius
Corner Radius
- 0.075 mm(26)
- 0.1 mm(145)
- 0.15 mm(74)
- 0.2 mm(234)
- 0.3 mm(61)
- 0.325 mm(81)
- 0.4 mm(215)
- 0.775 mm(49)
- 0.8 mm(142)
- 1.0 mm(68)
- 1.2 mm(40)
- 1.5 mm(67)
- 1.6 mm(67)
- 2.0 mm(49)
- 2.375 mm(49)
- 2.5 mm(26)
- 3.0 mm(32)
- 3.175 mm(32)
- 3.95 mm(23)
- 4.0 mm(23)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(202)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- WS25PT (66)
- WU10PT (191)
- WU25PT (409)
- WU35PT (141)
Hand Of Tool
Hand Of Tool
- L (106)
- N (15)
- R (106)
Wiper Insert
Wiper Insert
- N (383)
F Dimension
F Dimension
- 1.275 mm(2)
- 1.45 mm(2)
- 1.825 mm(3)
- 2.7 mm(2)
- 3.7 mm(1)
- 3.7005 mm(1)
- 4.7 mm(1)
- 5.7 mm(1)
- 7.5 mm(2)
- 8.525 mm(2)
- 9.0 mm(2)
- 9.53 mm(2)
- 10.0 mm(2)
- 11.0 mm(4)
- 11.062 mm(4)
- 12.0 mm(4)
- 12.7 mm(4)
- 13.0 mm(4)
- 13.945 mm(2)
- 13.969 mm(2)
- 15.88 mm(4)
- 15.973 mm(2)
- 16.0 mm(4)
- 16.09 mm(2)
- 17.0 mm(6)
- 17.304 mm(6)
- 19.05 mm(4)
- 19.08 mm(4)
- 19.085 mm(2)
- 19.13 mm(11)
- 19.135 mm(3)
- 20.0 mm(4)
- 20.06 mm(6)
- 20.11 mm(14)
- 25.06 mm(6)
- 25.11 mm(18)
- 25.21 mm(4)
- 25.336 mm(2)
- 25.43 mm(4)
- 25.435 mm(2)
- 25.48 mm(15)
- 25.485 mm(3)
- 25.58 mm(4)
- 25.71 mm(2)
- 31.83 mm(8)
- 31.93 mm(4)
- 32.06 mm(4)
- 32.08 mm(8)
- 32.18 mm(4)
- 32.306 mm(4)
- 32.41 mm(2)
- 32.656 mm(2)
- 38.28 mm(2)
- 38.41 mm(2)
- 38.76 mm(2)
- 40.18 mm(2)
- 40.306 mm(2)
- 40.656 mm(2)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 15.875 mm(2)
- 16.0 mm(2)
- 20.0 mm(8)
- 25.0 mm(8)
- 31.75 mm(6)
- 32.0 mm(6)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 15.875 mm(2)
- 16.0 mm(2)
- 20.0 mm(8)
- 25.0 mm(8)
- 31.75 mm(6)
- 32.0 mm(6)
- 57.15 mm(12)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(4)
- 32.0 mm(24)
- 406.4 mm(12)
to
Cutting Direction
Cutting Direction
- E (195)
- S (32)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (22)
- NEUTRAL (ZERO) (10)
- POSITIVE-ZERO (36)
Maximum Bore Depth
Maximum Bore Depth
- 24.0 mm(2)
- 25.4 mm(2)
- 31.75 mm(4)
- 32.0 mm(2)
- 38.1 mm(4)
- 40.0 mm(2)
- 40.295 mm(2)
- 40.506 mm(2)
- 50.0 mm(2)
- 50.275 mm(2)
- 50.3 mm(2)
- 50.8 mm(4)
- 63.5 mm(2)
to
Boring Bar Material
Boring Bar Material
- S (32)
Front-End
Clamp Style
Clamp Style
- C (12)
- M (36)
- S (28)
- Y (163)
Cutting Width
Cutting Width
- 1.4 mm(8)
- 1.404 mm(4)
- 2.0 mm(78)
- 2.125 mm(69)
- 2.387 mm(71)
- 2.388 mm(77)
- 2.5 mm(68)
- 2.51 mm(68)
- 2.511 mm(68)
- 3.0 mm(79)
- 3.125 mm(70)
- 3.175 mm(86)
- 3.176 mm(69)
- 3.301 mm(68)
- 3.302 mm(68)
- 4.0 mm(60)
- 4.125 mm(52)
- 4.75 mm(50)
- 4.754 mm(49)
- 4.761 mm(49)
- 4.762 mm(52)
- 4.763 mm(52)
- 4.877 mm(50)
- 4.878 mm(50)
- 5.0 mm(31)
- 5.125 mm(29)
- 6.0 mm(36)
- 6.125 mm(35)
- 6.35 mm(35)
- 6.477 mm(33)
- 6.478 mm(33)
- 7.125 mm(32)
- 7.92 mm(23)
- 7.925 mm(23)
- 8.0 mm(25)
- 8.051 mm(23)
- 8.052 mm(23)
- 8.125 mm(26)
- 9.525 mm(9)
- 9.651 mm(10)
- 10.125 mm(10)
to
Insert Shape
Insert Shape
- PRISMATIC (431)
Cartridge Size
Cartridge Size
- 50 (44)
- 65 (30)
Insert Size
Insert Size
- 10 (8)
- 2 (44)
- 3 (44)
- 4 (36)
- 5 (16)
- 6 (20)
- 8 (16)
Maximum Cutting Depth
Maximum Cutting Depth
- 5.0 mm(4)
- 7.0 mm(16)
- 8.0 mm(12)
- 10.0 mm(24)
- 12.0 mm(18)
- 14.0 mm(1)
- 15.0 mm(1)
- 16.0 mm(73)
- 17.0 mm(1)
- 19.05 mm(4)
- 20.0 mm(1)
- 22.0 mm(16)
- 25.4 mm(8)
- 26.0 mm(46)
- 30.0 mm(1)
- 32.0 mm(26)
- 40.0 mm(14)
- 50.0 mm(3)
- 60.0 mm(3)
- 120.0 mm(1)
to
Gage Length
Gage Length
- 69.7800 mm(2)
- 82.4800 mm(2)
- 95.3600 mm(3)
- 98.2200 mm(2)
- 107.8800 mm(1)
- 138.1500 mm(2)
- 138.7500 mm(2)
- 139.2500 mm(2)
- 139.9000 mm(6)
- 140.4000 mm(8)
- 140.5500 mm(2)
- 150.0000 mm(2)
- 151.4600 mm(3)
- 152.4000 mm(4)
- 158.1500 mm(2)
- 158.7500 mm(2)
- 159.2500 mm(2)
- 165.9500 mm(2)
- 170.0000 mm(2)
- 171.4500 mm(3)
- 177.8000 mm(2)
Insert Geometry
Shape
Shape
- PRISMATIC (158)
Insert Seat Size
Insert Seat Size
- 10 (5)
- 1B (8)
- 2 (30)
- 3 (44)
- 4 (32)
- 5 (10)
- 6 (18)
- 8 (11)
Cutting Tool Material
Cutting Tool Material
- H W (427)
Back-End
Connection Type
Connection Type
- BORING BAR (32)
- CUTOFF BLADE (15)
- SQUARE SHANK (180)
Back-End Diameter
Back-End Diameter
- 12.0 mm(2)
- 12.7 mm(2)
- 15.875 mm(4)
- 16.0 mm(4)
- 19.05 mm(4)
- 20.0 mm(4)
- 25.0 mm(6)
- 25.4 mm(7)
- 31.7 mm(1)
- 38.1 mm(1)
to
Shank Height
Shank Height
- 9.53 mm(2)
- 10.0 mm(2)
- 12.0 mm(4)
- 12.71 mm(4)
- 15.875 mm(2)
- 15.88 mm(4)
- 16.0 mm(6)
- 19.0 mm(3)
- 19.05 mm(27)
- 20.0 mm(25)
- 25.0 mm(38)
- 25.019 mm(1)
- 25.02 mm(1)
- 25.4 mm(47)
- 25.97 mm(1)
- 26.0 mm(4)
- 31.75 mm(28)
- 31.975 mm(1)
- 32.0 mm(31)
- 38.1 mm(13)
- 38.104 mm(1)
- 40.0 mm(6)
- 52.5 mm(1)
to
Shank Width
Shank Width
- 1.65 mm(3)
- 1.8 mm(4)
- 2.4 mm(2)
- 3.4 mm(2)
- 4.4 mm(1)
- 5.4 mm(1)
- 7.0 mm(2)
- 9.53 mm(2)
- 10.0 mm(2)
- 12.0 mm(4)
- 12.71 mm(4)
- 15.875 mm(2)
- 15.88 mm(4)
- 16.0 mm(6)
- 18.0 mm(1)
- 19.05 mm(25)
- 20.0 mm(24)
- 20.625 mm(2)
- 23.165 mm(1)
- 24.486 mm(1)
- 25.0 mm(38)
- 25.4 mm(39)
- 26.97 mm(3)
- 26.975 mm(4)
- 27.026 mm(1)
- 28.042 mm(1)
- 31.75 mm(27)
- 32.0 mm(26)
- 38.1 mm(13)
- 38.104 mm(1)
- 40.0 mm(6)
to
No filters matching ""
