M640 • Fraises à tenon • Métriques
Fraises à tenon • Métrique
Features and benefits
- Six arêtes de coupe.
- Angle de coupe super positif pour les machines peu puissantes ou les dispositifs de fixation légers.
- Géométries et nuances pour toutes les applications.
Uses and application
Fraisage — 3 tailles
Surfaçage
Fraisage — Arrosage interne
Filters and Columns
Filters
Filters
View filters in
Metric
Inch
Matière de la pièce à usiner
Matière de la pièce à usiner
-
P Acier (6)
-
P0Aciers bas carbone, à copeaux longs C < 0,25 % ; < 125 HB ; < 530 N/mm^2 UTS (6)
-
P1Aciers bas carbone, à copeaux courts C < 0,25 % ; < 125 HB ; < 530 N/mm^2 UTS (6)
-
P2Aciers moyenne et haute teneur en carbone C < 0,25 % ; < 220 HB ; < 25 HRC ; > 530 N/mm^2 UTS (6)
-
P3Aciers alliés et aciers à outils C > 0,25 % ; < 330 HB ; < 35 HRC ; 600-850 N/mm^2 UTS (6)
-
P4Aciers alliés et aciers à outils C > 0,25 % ; 350-420 HB; 35-43 HRC ; 850-1400 N/mm^2 UTS (6)
-
P5Aciers inoxydables ferritiques, martensitiques et PH < 330 HB ; < 35 HRC ; 600-900 N/mm^2 UTS (6)
-
P6Aciers inoxydables ferritiques, martensitiques et PH à haute résistance mécanique 350-450 HB ; 35-43 HRC ; 900-2400 N/mm^2 UTS (6)
-
-
M Acier inoxydable (6)
-
M1Acier inoxydable austénitique 130-200 HB ; < 600 N/mm^2 UTS (6)
-
M2Aciers inoxydables moulés et austénitiques haute résistance 150-230 HB ; < 25 HRC ; > 600 N/mm^2 UTS (6)
-
M3Acier inoxydable duplex 135-275 HB ; < 30 HRC ; 500-1200 N/mm^2 UTS (6)
-
-
K Fonte (6)
-
K1Fonte grise 120-290 HB ; < 32 HRC ; 125-500 N/mm^2 UTS (6)
-
K2CGI et fontes ductiles à résistance faible et moyenne 130-260 HB ; < 28 HRC ; <600 N/mm^2 UTS (6)
-
K3Fontes ductiles à haute résistance mécanique et fontes ductiles ayant subi une trempe étagée bainitique 180-350 HB ; < 43 HRC ; >600 N/mm^2 UTS (6)
-
-
N Matériaux non ferreux (6)
-
N1Aluminium corroyé (6)
-
N2Alliages d’aluminium à basse teneur en silicium et alliages de magnésium Si < 12,2 % (6)
-
N3Alliages d’aluminium à forte teneur en silicium Si > 12,2 % (6)
-
-
S Alliages hautes températures (6)
-
S1Alliages résistants à la chaleur à base de fer 160-260 HB ; 25-48 HRC ; 500-1200 N/mm^2 UTS (6)
-
S2Alliages résistants à la chaleur à base de cobalt 250-450 HB ; 25-48 HRC ; 1000-1450 N/mm^2 UTS (6)
-
S3Alliages résistants à la chaleur à base de nickel 160-450 HB ; < 48 HRC ; 600-1700 N/mm^2 UTS (6)
-
S4Titane et alliages de titane 300-400 HB ; 33-43 HRC ; 900-1600 N/mm^2 UTS (6)
-
-
H Matériaux trempés (6)
-
H1Matériaux trempés 44-48 HRC (6)
-
H2Matériaux trempés 48-55 HRC (6)
-
H3Matériaux trempés 56-60 HRC (6)
-
Select All Star
-
CN (4)
-
DE (3)
Diamètre de coupe
Diamètre de coupe
-
1.969 in (1)
-
2.48 in (1)
-
3.15 in (1)
-
3.938 in (2)
-
4.921 in (1)
to
Diamètre de coupe
Diamètre de coupe
-
50.0 mm (1)
-
63.0 mm (1)
-
80.0 mm (1)
-
100.0 mm (2)
-
125.0 mm (1)
to
Diamètre de coupe maximal
Diamètre de coupe maximal
-
56.401 mm (1)
-
69.4 mm (1)
-
86.4 mm (1)
-
106.4 mm (2)
-
131.4 mm (1)
to
Diamètre de coupe maximal
Diamètre de coupe maximal
-
2.221 in (1)
-
2.732 in (1)
-
3.402 in (1)
-
4.189 in (2)
-
5.173 in (1)
to
Reach
Reach
-
1.575 in (2)
-
1.969 in (3)
-
2.48 in (1)
to
Reach
Reach
-
40.0 mm (2)
-
50.0 mm (3)
-
63.0 mm (1)
to
Style de connexion
Style de connexion
-
A-Socket Head Cap Screw (2)
-
B-Cutter Retention Screw (4)
Nombre de goujures
Nombre de goujures
-
10 (1)
-
4 (1)
-
5 (1)
-
6 (1)
-
7 (1)
-
8 (1)
Arêtes de coupe par plaquette
Arêtes de coupe par plaquette
-
3.0 (6)
-
6.0 (6)
to
Longueur totale L
Longueur totale L
-
1.575 in (2)
-
1.969 in (3)
-
2.48 in (1)
to
Longueur totale L
Longueur totale L
-
40.0 mm (2)
-
50.0 mm (3)
-
63.0 mm (1)
to
Rayon de pointe
Rayon de pointe
-
0.035 in (6)
-
0.038 in (6)
to
Rayon de pointe
Rayon de pointe
-
0.9 mm (6)
-
0.976 mm (6)
to
application
Nuance de l’outil de coupe
Nuance de l’outil de coupe
-
THM (6)
-
THM-U (6)
-
TN2510 (6)
-
TN5515 (6)
-
TN6501 (6)
-
TN6502 (6)
-
TN6510 (6)
-
TN6520 (6)
-
TN6525 (6)
-
TN6540 (6)
-
TN7525 (6)
-
TN7535 (6)
-
WK15CM (6)
-
WP25PM (6)
-
WP35CM (6)
-
WP40PM (6)
-
WS30PM (6)
-
WS40PM (6)
backEnd
Diamètre arrière
Diamètre arrière
-
22.0 mm (2)
-
27.0 mm (1)
-
32.0 mm (2)
-
40.0 mm (1)
to
Diamètre arrière
Diamètre arrière
-
0.866 in (2)
-
1.063 in (1)
-
1.26 in (2)
-
1.575 in (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1-
6
of
6 results
Metric
Inch
Show
Metric
Inch
| Numéro de matériaux SAP | Réf. catalogue ISO | Réf. catalogue ANSI | Nuance | Premier choix | [D1] Diamètre effectif de coupe | [D1] Diamètre effectif de coupe | [L] Longueur totale | [L] Longueur totale | [D1MAX] Diamètre de coupe maximal | [D1MAX] Diamètre de coupe maximal | Alimentation en arrosage | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2263132 | 12395410200 | 12395410200 | W | 50 | 1.968 | 40 | 1.574 | 56.4 | 2.22 | Y |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$586.72
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2263154 | 12395410400 | 12395410400 | W | 63 | 2.48 | 40 | 1.574 | 69.4 | 2.732 | Y |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$606.62
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2263156 | 12395410600 | 12395410600 | W | 80 | 3.149 | 50 | 1.968 | 86.4 | 3.401 | Y |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$730.35
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2263158 | 12395410800 | 12395410800 | W | 100 | 3.937 | 50 | 1.968 | 106.4 | 4.189 | N |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$858.80
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2263160 | 12395411000 | 12395411000 | W | 125 | 4.921 | 63 | 2.48 | 131.4 | 5.173 | N |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$1,083.21
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2263159 | 12395415800 | 12395415800 | W | 100 | 3.937 | 50 | 1.968 | 106.4 | 4.189 | N |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$1,086.06
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
Guide de sélection des plaquettes
| Material Group | Light
|
General
|
Heavy
|
|||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | .E..LD | WP40PM | .E..GD | WP40PM | .E..GD | WP40PM |
| P3–P4 | .E..LD | WP25PM | .E..GD | WS40PM | .E..GD | WS40PM |
| P5–P6 | .E..LD | WP25PM | .E..GD | WP25PM | .E..GD | WP25PM |
| M1–M2 | .E..LD | WP25PM | .E..GD | WP25PM | .E..GD | WP25PM |
| M3 | .E..LD | WP40PM | .E..GD | WS30PM | .E..GD | WS30PM |
| K1–K2 | .E..GD | TN6510 | .E..GD | WK15CM | .E..GD | WK15CM |
| K3 | .E..LD | TN6520 | .E..GD | WP25PM | .E..GD | WP25PM |
| N1–N2 | .E..LD | WS40PM | .E..GD | WS40PM | .E..GD | WS40PM |
| N3 | .E..LD | WS40PM | .E..GD | WS40PM | .E..GD | WS40PM |
Avances de départ recommandées [mm]
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| .F..LDAL | 0,13 | 0,34 | 0,47 | 0,10 | 0,25 | 0,34 | 0,07 | 0,18 | 0,25 | 0,06 | 0,16 | 0,22 | 0,06 | 0,15 | 0,20 | .F..LDAL |
| .E..LD | 0,13 | 0,34 | 0,47 | 0,10 | 0,25 | 0,34 | 0,07 | 0,18 | 0,25 | 0,06 | 0,16 | 0,22 | 0,06 | 0,15 | 0,20 | .E..LD |
| .E..GD | 0,13 | 0,48 | 0,54 | 0,10 | 0,35 | 0,39 | 0,07 | 0,26 | 0,29 | 0,06 | 0,23 | 0,25 | 0,06 | 0,21 | 0,23 | .E..GD |
| Light
|
General
|
Heavy
|
Recommended Starting Feeds [IPT]
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| .F..LDAL | .005 | .013 | .018 | .004 | .010 | .013 | .003 | .007 | .010 | .003 | .006 | .009 | .002 | .006 | .008 | .F..LDAL |
| .E..LD | .005 | .013 | .018 | .004 | .010 | .013 | .003 | .007 | .010 | .003 | .006 | .009 | .002 | .006 | .008 | .E..LD |
| .E..GD | .005 | .019 | .021 | .004 | .014 | .015 | .003 | .010 | .011 | .003 | .009 | .010 | .002 | .008 | .009 | .E..GD |
| Light
|
General
|
Heavy
|
Vitesses de départ recommandées [m/mn]
| Material Group | TN6510 | TN6520 | TN6525 | TN6540 | WK15CM | |||||||||||
| P | 1 | – | – | – | – | – | – | 410 | 320 | 280 | 360 | 280 | 240 | – | – | – |
| 2 | – | – | – | – | – | – | 320 | 250 | 215 | 250 | 190 | 170 | – | – | – | |
| 3 | – | – | – | – | – | – | 280 | 215 | 185 | 215 | 170 | 140 | – | – | – | |
| 4 | – | – | – | – | – | – | 235 | 170 | 145 | 180 | 130 | 110 | – | – | – | |
| 5 | – | – | – | – | – | – | 310 | 235 | 200 | 240 | 180 | 150 | – | – | – | |
| 6 | – | – | – | – | – | – | 205 | 160 | 130 | 160 | 120 | 100 | – | – | – | |
| M | 1 | – | – | – | – | – | – | 190 | 120 | 80 | 130 | 80 | 60 | – | – | – |
| 2 | – | – | – | – | – | – | 120 | 80 | 50 | 80 | 50 | 40 | – | – | – | |
| 3 | – | – | – | – | – | – | 125 | 80 | 55 | 85 | 50 | 40 | – | – | – | |
| K | 1 | 480 | 350 | 260 | 450 | 320 | 230 | 275 | 245 | 220 | 220 | 205 | 180 | 505 | 460 | 410 |
| 2 | 420 | 280 | 205 | 390 | 250 | 190 | 215 | 190 | 180 | 175 | 155 | 140 | 400 | 355 | 330 | |
| 3 | 335 | 260 | 200 | 300 | 230 | 160 | 180 | 160 | 145 | 155 | 145 | 125 | 335 | 300 | 275 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 50 | 35 | 30 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 25 | 20 | 10 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 70 | 40 | 30 | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 60 | 30 | 25 | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | WP25PM | WP40PM | WS30PM | WS40PM | THM-U | THM | |||||||||||||
| P | 1 | 395 | 340 | 325 | 355 | 310 | 295 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 330 | 290 | 240 | 300 | 260 | 215 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 305 | 260 | 210 | 275 | 235 | 190 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | 270 | 220 | 180 | 245 | 205 | 160 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | 220 | 205 | 180 | 205 | 185 | 160 | – | – | – | 205 | 175 | 145 | – | – | – | – | – | – | |
| 6 | 200 | 150 | 120 | 180 | 140 | 110 | – | – | – | 180 | 130 | 95 | – | – | – | – | – | – | |
| M | 1 | 245 | 215 | 200 | 235 | 205 | 185 | 270 | 240 | 220 | 250 | 205 | 170 | – | – | – | – | – | – |
| 2 | 220 | 190 | 155 | 210 | 180 | 150 | 245 | 215 | 175 | 215 | 175 | 145 | – | – | – | – | – | – | |
| 3 | 170 | 145 | 115 | 155 | 140 | 110 | 185 | 160 | 125 | 175 | 130 | 100 | – | – | – | – | – | – | |
| K | 1 | 275 | 245 | 220 | – | – | – | – | – | – | – | – | – | 230 | 205 | 180 | 145 | 110 | 90 |
| 2 | 215 | 190 | 180 | – | – | – | – | – | – | – | – | – | – | – | – | 150 | 120 | 85 | |
| 3 | 180 | 160 | 145 | – | – | – | – | – | – | – | – | – | – | – | – | 155 | 115 | 70 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 2400 | 1440 | 1200 | 1080 | 720 | 600 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 1640 | 980 | 800 | 820 | 560 | 460 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 960 | 600 | 480 | 540 | 335 | 240 | |
| S | 1 | 50 | 40 | 30 | 50 | 40 | 35 | 55 | 50 | 35 | 50 | 40 | 30 | – | – | – | – | – | – |
| 2 | 50 | 40 | 30 | 50 | 40 | 35 | 55 | 50 | 35 | 50 | 40 | 30 | – | – | – | – | – | – | |
| 3 | 60 | 50 | 30 | 60 | 50 | 35 | 65 | 55 | 35 | 60 | 50 | 30 | – | – | – | – | – | – | |
| 4 | 85 | 60 | 40 | 80 | 60 | 40 | 100 | 70 | 50 | 70 | 60 | 35 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
Recommended Starting Speeds [SFM]
| Material Group | WK15CM | WP25PM | WP40PM | WS30PM | WS40PM | |||||||||||
| P | 1 | – | – | – | 1295 | 1120 | 1060 | 1165 | 1025 | 965 | – | – | – | 915 | 800 | 750 |
| 2 | – | – | – | 1080 | 940 | 785 | 985 | 845 | 710 | – | – | – | 770 | 670 | 555 | |
| 3 | – | – | – | 1000 | 845 | 690 | 905 | 770 | 630 | – | – | – | 705 | 605 | 490 | |
| 4 | – | – | – | 890 | 725 | 590 | 805 | 670 | 535 | – | – | – | 635 | 520 | 425 | |
| 5 | – | – | – | 725 | 670 | 590 | 670 | 610 | 535 | – | – | – | 520 | 455 | 425 | |
| 6 | – | – | – | 650 | 490 | 395 | 590 | 450 | 355 | – | – | – | 455 | 360 | 275 | |
| M | 1 | – | – | – | 805 | 710 | 650 | 770 | 670 | 610 | 890 | 785 | 725 | 850 | 620 | 375 |
| 2 | – | – | – | 725 | 630 | 510 | 690 | 590 | 490 | 805 | 710 | 570 | 750 | 555 | 340 | |
| 3 | – | – | – | 550 | 475 | 370 | 510 | 450 | 355 | 610 | 535 | 415 | 620 | 455 | 260 | |
| K | 1 | 1655 | 1520 | 1340 | 905 | 805 | 725 | – | – | – | – | – | – | – | – | – |
| 2 | 1320 | 1165 | 1080 | 710 | 630 | 590 | – | – | – | – | – | – | – | – | – | |
| 3 | 1105 | 985 | 905 | 590 | 535 | 475 | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 3525 | 3100 | 3100 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 3100 | 2870 | 2770 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 2870 | 2490 | 2490 | |
| S | 1 | – | – | – | 155 | 140 | 95 | 155 | 140 | 120 | 180 | 155 | 120 | 200 | 145 | 85 |
| 2 | – | – | – | 155 | 140 | 95 | 155 | 140 | 120 | 180 | 155 | 120 | 180 | 130 | 85 | |
| 3 | – | – | – | 200 | 155 | 95 | 200 | 155 | 120 | 215 | 180 | 120 | 205 | 150 | 95 | |
| 4 | – | – | – | 275 | 200 | 140 | 260 | 200 | 140 | 335 | 235 | 155 | 295 | 215 | 135 | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | THM | THM-U | TN6510 | TN6520 | TN6525 | TN6540 | |||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 1340 | 1045 | 925 | 1180 | 925 | 785 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 1045 | 830 | 710 | 830 | 630 | 550 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 925 | 710 | 610 | 710 | 550 | 450 | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | 770 | 550 | 475 | 590 | 430 | 355 | |
| 5 | – | – | – | – | – | – | – | – | – | – | – | – | 1025 | 770 | 650 | 785 | 590 | 490 | |
| 6 | – | – | – | – | – | – | – | – | – | – | – | – | 670 | 535 | 430 | 535 | 395 | 335 | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 630 | 395 | 260 | 430 | 260 | 200 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 395 | 260 | 155 | 260 | 155 | 140 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 415 | 260 | 180 | 275 | 155 | 140 | |
| K | 1 | 475 | 355 | 295 | 750 | 670 | 590 | 1570 | 1140 | 845 | 1475 | 1045 | 750 | 905 | 805 | 725 | 725 | 670 | 590 |
| 2 | 490 | 395 | 275 | – | – | – | 1380 | 925 | 670 | 1280 | 830 | 630 | 710 | 630 | 590 | 570 | 510 | 450 | |
| 3 | 510 | 370 | 235 | – | – | – | 1105 | 845 | 650 | 985 | 750 | 535 | 590 | 535 | 475 | 510 | 475 | 415 | |
| N | 1 | 3540 | 2365 | 1970 | 7870 | 4720 | 3935 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 2695 | 1830 | 1520 | 5370 | 3210 | 2615 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 1770 | 1105 | 785 | 3150 | 1970 | 1570 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 155 | 120 | 95 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 80 | 60 | 40 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 235 | 140 | 95 | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 200 | 95 | 80 | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |