External Machining • Tool Holders
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (388)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(388)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(388)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(388)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(388)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(388)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(388)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(388)
- M Stainless Steel (361)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(361)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(358)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(358)
- K Cast Iron (393)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(393)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(393)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(392)
- N Non-Ferrous Materials (365)
- N1Wrought Aluminum (365)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(365)
- N3High-Silicon Aluminum Alloys Si >12.2%(179)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (364)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (188)
- N6Carbon, Graphite Composites, CFRP (186)
- N7MMC's (185)
- S High-Temp Alloys (391)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(391)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(391)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(391)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(367)
- H Hardened Materials (284)
- H1Hardened Materials 44-48 HRC(284)
- H2Hardened Materials 48-55 HRC(284)
- H3Hardened Materials 56-60 HRC(284)
- H4Hardened Materials >60 HRC(284)
Select All Star
- DE (41)
- IN (14)
- SG (7)
- US (11)
Applications
Applications
Chamfer Turning (3)
Facing (274)
Multiple Direction Cutting (310)
Profiling (295)
Turning (395)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (370)
- Lightly Interrupted Cut (403)
- Smooth Cut (403)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (45)
- 50.0 (2)
- 60.0 (2)
- 62.5 (7)
- 63.0 (7)
- 72.5 (10)
- 75.0 (56)
- 90.0 (52)
- 93.0 (100)
- 95.0 (105)
- 107.5 (17)
- 117.5 (5)
to
Connection Style
Connection Style
- Boring Bar Shank (5)
- Toolholder (403)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (214)
- 2.0 (207)
- 3.0 (51)
- 4.0 (247)
- 6.0 (51)
- 8.0 (133)
to
Over All Length [L]
Over All Length [L]
- 63.5 mm(1)
- 70.0 mm(3)
- 80.0 mm(10)
- 88.9 mm(5)
- 100.0 mm(24)
- 101.6 mm(2)
- 114.3 mm(18)
- 124.75 mm(1)
- 125.0 mm(74)
- 127.0 mm(6)
- 140.0 mm(1)
- 149.75 mm(1)
- 150.0 mm(108)
- 152.4 mm(62)
- 170.0 mm(70)
- 171.0 mm(1)
- 200.0 mm(2)
- 250.0 mm(16)
- 300.0 mm(3)
to
Availability
GSA Approved Product
GSA Approved Product
Corner Radius
Corner Radius
- 0.1 mm(134)
- 0.2 mm(173)
- 0.4 mm(305)
- 0.6 mm(18)
- 0.8 mm(369)
- 1.2 mm(335)
- 1.6 mm(202)
- 2.375 mm(1)
- 2.4 mm(37)
- 3.0 mm(3)
- 3.175 mm(1)
- 4.0 mm(3)
- 4.775 mm(2)
- 5.0 mm(2)
- 6.0 mm(2)
- 6.35 mm(11)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CG5 (1)
- CG55 (2)
- CG6 (1)
- CM1 (1)
- CW2015 (185)
- CW3020 (14)
- CW5025 (120)
- HCK10 (14)
- PB100 (45)
- PB250 (5)
- THM (229)
- THM-F (2)
- THM-X (146)
- THMF-X (76)
- TN10P (248)
- TN10U (203)
- TN15M (165)
- TN15U (149)
- TN2000 (239)
- TN20K (282)
- TN20P (323)
- TN30M (212)
- TN30P (173)
- TN4000 (222)
- TN6010 (94)
- TN6025 (32)
- TTM08 (2)
- TTM09 (12)
- TTMS (2)
- TTR (28)
- TTR-X (17)
- TTS (107)
- W00162 (4)
- WBH10P (134)
- WBH10U (56)
- WBH20P (200)
- WBH30P (130)
- WBK40U (28)
- WBK45U (15)
- WDN00U (69)
- WDN25U (178)
- WK05CT (261)
- WK15CT (212)
- WK20CT (360)
- WM15CT (292)
- WM25CT (346)
- WM35CT (230)
- WP05CT (58)
- WP15CT (378)
- WP20TT (26)
- WP25CT (370)
- WP35CT (292)
- WS10PT (299)
- WS25PT (304)
- WU05PT (57)
- WU10HT (307)
- WU10PT (250)
- WU25PT (263)
Hand Of Tool
Hand Of Tool
- L (149)
- N (58)
- R (201)
Wiper Insert
Wiper Insert
- N (404)
- Y (98)
F Dimension
F Dimension
- 4.0 mm(1)
- 6.0 mm(2)
- 6.35 mm(2)
- 7.0 mm(2)
- 8.0 mm(1)
- 9.0 mm(2)
- 9.5 mm(1)
- 9.52 mm(2)
- 9.959 mm(1)
- 10.0 mm(8)
- 11.0 mm(2)
- 12.0 mm(9)
- 12.25 mm(1)
- 12.5 mm(18)
- 12.6 mm(1)
- 12.62 mm(1)
- 12.7 mm(6)
- 13.0 mm(5)
- 14.0 mm(1)
- 15.0 mm(2)
- 15.5 mm(1)
- 15.875 mm(3)
- 15.88 mm(1)
- 16.0 mm(10)
- 16.5 mm(1)
- 17.0 mm(5)
- 17.5 mm(1)
- 18.0 mm(1)
- 18.5 mm(1)
- 19.05 mm(2)
- 19.5 mm(1)
- 20.0 mm(21)
- 22.0 mm(8)
- 23.16 mm(2)
- 25.0 mm(55)
- 25.4 mm(17)
- 27.0 mm(7)
- 28.65 mm(1)
- 31.75 mm(38)
- 32.0 mm(98)
- 33.55 mm(1)
- 35.0 mm(6)
- 38.1 mm(12)
- 40.0 mm(29)
- 43.0 mm(1)
- 47.02 mm(1)
- 50.0 mm(12)
- 50.8 mm(4)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 13.0 mm(2)
- 16.0 mm(2)
- 20.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 13.0 mm(2)
- 16.0 mm(2)
- 20.0 mm(1)
to
Cutting Direction
Cutting Direction
- B (123)
- E (37)
- S (248)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (227)
- DOUBLE POSITIVE (1)
- NEGATIVE-ZERO (58)
- NEUTRAL (ZERO) (110)
- POSITIVE-ZERO (12)
Maximum Bore Depth
Maximum Bore Depth
- 40.0 mm(2)
- 48.0 mm(2)
- 64.0 mm(1)
to
Boring Bar Material
Boring Bar Material
- S (5)
Front-End
Clamp Style
Clamp Style
- C (25)
- D (145)
- M (16)
- N (1)
- P (101)
- S (120)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (110)
- D-DIAMOND/RHOMBIC 55 (85)
- N/K-PARALLELOGRAM 55 (2)
- R-ROUND (25)
- S-SQUARE 90 (71)
- T-TRIANGLE 60 (33)
- V-DIAMOND/RHOMBIC 35 (54)
- W-TRIGON 80 (28)
Maximum Cutting Depth
Maximum Cutting Depth
- 16.0 mm(2)
- 19.0 mm(1)
- 19.7 mm(2)
- 20.0 mm(2)
- 25.0 mm(3)
- 28.0 mm(1)
- 29.0 mm(2)
- 35.0 mm(1)
- 38.0 mm(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (99)
- B L (222)
- C A (186)
- C N (157)
- D P (178)
- H T (26)
- H W (389)
Back-End
Connection Type
Connection Type
- BORING BAR (5)
- SQUARE SHANK (403)
Back-End Diameter
Back-End Diameter
- 10.0 mm(2)
- 12.0 mm(2)
- 16.0 mm(1)
to
Shank Height
Shank Height
- 8.0 mm(1)
- 9.52 mm(1)
- 10.0 mm(4)
- 12.0 mm(10)
- 12.7 mm(6)
- 15.88 mm(2)
- 16.0 mm(24)
- 19.05 mm(19)
- 20.0 mm(73)
- 25.0 mm(105)
- 25.03 mm(1)
- 25.4 mm(44)
- 31.75 mm(17)
- 32.0 mm(71)
- 38.1 mm(5)
- 40.0 mm(19)
- 50.0 mm(1)
to
Shank Width
Shank Width
- 8.0 mm(1)
- 9.52 mm(1)
- 10.0 mm(5)
- 12.0 mm(10)
- 12.7 mm(6)
- 15.88 mm(2)
- 16.0 mm(24)
- 19.05 mm(19)
- 20.0 mm(73)
- 25.0 mm(140)
- 25.4 mm(48)
- 31.75 mm(13)
- 32.0 mm(37)
- 38.1 mm(5)
- 40.0 mm(18)
- 50.0 mm(1)
to
No filters matching ""
