O.D. and I.D. Turning
Outside Diameter (OD) and Inside Diameter (ID) turning tools are engineered to drive efficiency and productivity in your metal-cutting operations. In OD turning, the outer surface of a workpiece is machined while in ID turning, the inner diameter of a workpiece is machined. WIDIA High-performance indexable inserts and toolholders are essential components offering advanced geometries, coatings, and materials to provide optimal chip control, surface finish quality, and tool life. WIDIA’s General indexable inserts offer flexibility and cost-efficiency. Additionally, boring bars are available to enlarge existing holes or create internal features with high precision and accuracy. OD and ID turning operations are essential for creating shafts, bushings, cylinders, and other cylindrical components with tight tolerances and superior surface finishes. With the right combination of high-performance inserts, tool holders, boring bars, and specialty turning tools, you can achieve exceptional results for your machining applications.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (2827)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2804)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2804)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(2827)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2813)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(2813)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2790)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2790)
- M Stainless Steel (1720)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1720)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1703)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1703)
- K Cast Iron (2112)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(2105)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2092)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2062)
- N Non-Ferrous Materials (1157)
- N1Wrought Aluminum (1134)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1148)
- N3High-Silicon Aluminum Alloys Si >12.2%(646)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (902)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (549)
- N6Carbon, Graphite Composites, CFRP (527)
- N7MMC's (497)
- S High-Temp Alloys (1507)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1506)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1506)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1492)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1039)
- H Hardened Materials (649)
- H1Hardened Materials 44-48 HRC(649)
- H2Hardened Materials 48-55 HRC(649)
- H3Hardened Materials 56-60 HRC(649)
- H4Hardened Materials >60 HRC(649)
Select All Star
- CN (147)
- DE (789)
- GB (98)
- IN (427)
- SG (316)
- US (485)
Applications
Applications
Back Boring (54)
Boring (20)
CRT Profiling (16)
Chamfer Turning (3)
Facing (308)
Grooving (4)
ID Facing (29)
ID Grooving (3)
ID Thread Turning (5)
Multiple Direction Cutting (741)
OD Thread Turning (3)
Turning (423)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (1320)
- Lightly Interrupted Cut (1927)
- Smooth Cut (2348)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 0.0 (1)
- 45.0 (55)
- 50.0 (5)
- 53.0 (1)
- 60.0 (13)
- 62.5 (9)
- 63.0 (7)
- 67.5 (5)
- 72.5 (8)
- 75.0 (63)
- 85.0 (2)
- 90.0 (176)
- 92.0 (16)
- 92.5 (3)
- 93.0 (173)
- 95.0 (366)
- 97.0 (11)
- 107.5 (35)
- 117.5 (5)
to
Connection Style
Connection Style
- Boring Bar Shank (480)
- Toolholder (415)
- WHISTLE NOTCH 5° A/B BoringBar (32)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (2)
- 1.0 (601)
- 2.0 (959)
- 3.0 (510)
- 4.0 (1015)
- 6.0 (495)
- 8.0 (705)
to
Over All Length [L]
Over All Length [L]
- 1.05 in(1)
- 1.2598 in(4)
- 1.2713 in(1)
- 1.3 in(1)
- 1.55 in(1)
- 1.5748 in(4)
- 1.9685 in(1)
- 1.9717 in(2)
- 1.972 in(2)
- 1.998 in(1)
- 2.0559 in(1)
- 2.1343 in(1)
- 2.1654 in(6)
- 2.178 in(2)
- 2.2055 in(1)
- 2.2858 in(1)
- 2.3622 in(1)
- 2.375 in(2)
- 2.4803 in(3)
- 2.5 in(26)
- 2.75 in(12)
- 2.7559 in(6)
- 2.756 in(2)
- 2.757 in(1)
- 3.0 in(16)
- 3.125 in(1)
- 3.1496 in(9)
- 3.15 in(1)
- 3.375 in(4)
- 3.5 in(11)
- 3.75 in(9)
- 3.937 in(22)
- 3.95 in(3)
- 3.96 in(2)
- 3.997 in(2)
- 4.0 in(55)
- 4.25 in(5)
- 4.3307 in(3)
- 4.331 in(2)
- 4.5 in(22)
- 4.75 in(2)
- 4.8524 in(1)
- 4.8917 in(1)
- 4.911 in(1)
- 4.921 in(31)
- 4.9213 in(54)
- 4.997 in(1)
- 5.0 in(17)
- 5.5118 in(1)
- 5.876 in(1)
- 5.896 in(1)
- 5.9055 in(63)
- 5.906 in(47)
- 5.9547 in(2)
- 5.9843 in(1)
- 5.99 in(2)
- 6.0 in(127)
- 6.6929 in(39)
- 6.693 in(34)
- 6.732 in(1)
- 7.0 in(4)
- 7.0866 in(8)
- 7.874 in(39)
- 8.0 in(23)
- 9.8425 in(32)
- 9.843 in(23)
- 9.8996 in(2)
- 10.0 in(30)
- 11.811 in(40)
- 12.0 in(11)
- 13.7795 in(2)
- 13.78 in(8)
- 14.0 in(11)
- 15.748 in(4)
- 16.0 in(6)
to
Over All Length [L]
Over All Length [L]
- 26.67 mm(1)
- 32.0 mm(4)
- 32.29 mm(1)
- 33.02 mm(1)
- 39.37 mm(1)
- 40.0 mm(4)
- 50.0 mm(1)
- 50.08 mm(2)
- 50.09 mm(2)
- 50.75 mm(1)
- 52.22 mm(1)
- 54.21 mm(1)
- 55.0 mm(6)
- 55.32 mm(2)
- 56.02 mm(1)
- 58.06 mm(1)
- 60.0 mm(1)
- 60.32 mm(2)
- 63.0 mm(3)
- 63.5 mm(26)
- 69.85 mm(11)
- 69.86 mm(1)
- 70.0 mm(9)
- 72.2 mm(1)
- 76.2 mm(15)
- 79.37 mm(1)
- 80.0 mm(10)
- 85.72 mm(3)
- 85.73 mm(1)
- 88.9 mm(11)
- 95.25 mm(9)
- 100.0 mm(22)
- 100.33 mm(3)
- 100.58 mm(2)
- 101.51 mm(2)
- 101.59 mm(1)
- 101.6 mm(54)
- 107.95 mm(5)
- 110.0 mm(5)
- 114.3 mm(22)
- 120.65 mm(2)
- 123.25 mm(1)
- 124.25 mm(1)
- 124.75 mm(1)
- 125.0 mm(85)
- 126.91 mm(1)
- 127.0 mm(17)
- 140.0 mm(1)
- 149.25 mm(1)
- 149.75 mm(1)
- 150.0 mm(110)
- 151.25 mm(2)
- 152.0 mm(1)
- 152.15 mm(2)
- 152.4 mm(126)
- 154.2 mm(1)
- 170.0 mm(73)
- 171.0 mm(1)
- 177.8 mm(4)
- 180.0 mm(8)
- 200.0 mm(39)
- 203.2 mm(23)
- 250.0 mm(55)
- 251.45 mm(2)
- 254.0 mm(30)
- 300.0 mm(40)
- 304.8 mm(10)
- 304.81 mm(1)
- 350.0 mm(10)
- 355.6 mm(11)
- 400.0 mm(4)
- 406.4 mm(6)
to
Corner Radius
Corner Radius
- 0.002 in(100)
- 0.004 in(266)
- 0.005 in(4)
- 0.007 in(274)
- 0.008 in(436)
- 0.015 in(257)
- 0.016 in(1182)
- 0.024 in(31)
- 0.031 in(1661)
- 0.037 in(1)
- 0.047 in(921)
- 0.063 in(422)
- 0.079 in(3)
- 0.094 in(75)
- 0.118 in(9)
- 0.125 in(2)
- 0.157 in(15)
- 0.188 in(9)
- 0.197 in(9)
- 0.236 in(11)
- 0.25 in(31)
- 0.315 in(6)
- 0.354 in(11)
- 0.375 in(4)
- 0.394 in(18)
- 0.472 in(11)
- 0.492 in(3)
- 0.512 in(12)
- 0.591 in(12)
- 0.63 in(2)
- 0.709 in(12)
- 0.787 in(12)
- 0.866 in(12)
- 0.984 in(12)
- 1.063 in(12)
- 1.102 in(11)
- 1.181 in(12)
- 1.378 in(12)
- 1.575 in(12)
- 1.772 in(12)
- 1.969 in(12)
- 2.165 in(11)
- 2.362 in(12)
- 2.559 in(11)
- 2.756 in(1)
- 2.953 in(11)
- 3.15 in(12)
to
Corner Radius
Corner Radius
- 0.05 mm(100)
- 0.1 mm(266)
- 0.125 mm(4)
- 0.175 mm(274)
- 0.2 mm(436)
- 0.375 mm(257)
- 0.4 mm(1182)
- 0.6 mm(31)
- 0.775 mm(76)
- 0.8 mm(1611)
- 0.95 mm(1)
- 1.2 mm(921)
- 1.6 mm(422)
- 2.0 mm(3)
- 2.375 mm(2)
- 2.4 mm(74)
- 3.0 mm(9)
- 3.175 mm(2)
- 4.0 mm(15)
- 4.775 mm(9)
- 5.0 mm(9)
- 6.0 mm(11)
- 6.35 mm(31)
- 8.0 mm(6)
- 9.0 mm(11)
- 9.525 mm(4)
- 10.0 mm(18)
- 12.0 mm(11)
- 12.5 mm(3)
- 13.0 mm(12)
- 15.0 mm(12)
- 16.0 mm(2)
- 18.0 mm(12)
- 20.0 mm(12)
- 22.0 mm(12)
- 25.0 mm(12)
- 27.0 mm(12)
- 28.0 mm(11)
- 30.0 mm(12)
- 35.0 mm(12)
- 40.0 mm(12)
- 45.0 mm(12)
- 50.0 mm(12)
- 55.0 mm(11)
- 60.0 mm(12)
- 65.0 mm(11)
- 70.0 mm(1)
- 75.0 mm(11)
- 80.0 mm(12)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(2490)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(2490)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- AT15S (1)
- C25 (158)
- C3 (36)
- CBN6 (40)
- CG5 (332)
- CG55 (20)
- CG6 (231)
- CM1 (258)
- CW2015 (310)
- CW3020 (26)
- CW5025 (215)
- HCK10 (67)
- HWK10 (10)
- HWK15 (23)
- PB100 (97)
- PB250 (13)
- THM (458)
- THM X (1)
- THM-F (5)
- THM-X (281)
- THMF-X (123)
- TN10P (441)
- TN10U (436)
- TN15M (293)
- TN15U (246)
- TN2000 (427)
- TN20K (504)
- TN20P (599)
- TN30M (399)
- TN30P (269)
- TN4000 (381)
- TN6010 (170)
- TN6025 (64)
- TN6540 (1)
- TN7 (195)
- TTM08 (7)
- TTM09 (13)
- TTMS (5)
- TTR (96)
- TTR-X (22)
- TTS (174)
- W00160 (3)
- W00162 (16)
- WBH10P (229)
- WBH10U (147)
- WBH20P (366)
- WBH30P (244)
- WBH40C (1)
- WBK40U (32)
- WBK45U (27)
- WDN00U (154)
- WDN10U (35)
- WDN15U (3)
- WDN25U (450)
- WK05CT (426)
- WK15CT (420)
- WK20CT (912)
- WM15CT (510)
- WM25CT (767)
- WM35CT (366)
- WP05CT (101)
- WP15CT (840)
- WP20TT (82)
- WP25CT (898)
- WP35CM (1)
- WP35CT (509)
- WS10PT (575)
- WS25PT (530)
- WU05PT (161)
- WU10HT (562)
- WU10PT (452)
- WU25PT (479)
Hand Of Tool
Hand Of Tool
- L (284)
- N (62)
- R (581)
Wiper Insert
Wiper Insert
- N (3312)
- Y (190)
F Dimension
F Dimension
- 0.0 mm(4)
- 0.61 mm(1)
- 0.66 mm(5)
- 1.041 mm(4)
- 1.067 mm(1)
- 1.168 mm(1)
- 1.4 mm(1)
- 1.448 mm(5)
- 1.549 mm(1)
- 1.78 mm(3)
- 1.854 mm(3)
- 1.93 mm(3)
- 2.235 mm(3)
- 2.41 mm(11)
- 2.64 mm(17)
- 2.82 mm(4)
- 2.95 mm(8)
- 2.97 mm(2)
- 3.02 mm(5)
- 3.048 mm(2)
- 3.1 mm(5)
- 3.12 mm(1)
- 3.18 mm(2)
- 3.2 mm(10)
- 3.4 mm(2)
- 3.43 mm(1)
- 3.61 mm(1)
- 3.63 mm(1)
- 3.68 mm(14)
- 3.7 mm(1)
- 3.71 mm(2)
- 3.73 mm(3)
- 3.734 mm(1)
- 3.835 mm(1)
- 3.86 mm(4)
- 3.91 mm(2)
- 3.94 mm(2)
- 3.96 mm(15)
- 4.0 mm(1)
- 4.27 mm(1)
- 4.42 mm(3)
- 4.44 mm(2)
- 4.5 mm(4)
- 4.7 mm(6)
- 4.75 mm(15)
- 4.8 mm(1)
- 5.0 mm(2)
- 5.2 mm(1)
- 5.3 mm(2)
- 5.36 mm(3)
- 5.54 mm(2)
- 5.59 mm(7)
- 5.61 mm(9)
- 5.66 mm(1)
- 5.79 mm(5)
- 5.875 mm(2)
- 5.94 mm(2)
- 5.99 mm(2)
- 6.0 mm(9)
- 6.35 mm(8)
- 6.38 mm(4)
- 6.55 mm(1)
- 6.6 mm(2)
- 6.81 mm(1)
- 6.875 mm(1)
- 6.93 mm(3)
- 7.0 mm(13)
- 7.01 mm(1)
- 7.07 mm(2)
- 7.11 mm(1)
- 7.29 mm(1)
- 7.52 mm(10)
- 7.54 mm(1)
- 7.92 mm(6)
- 7.925 mm(7)
- 8.0 mm(1)
- 8.13 mm(2)
- 8.59 mm(2)
- 8.61 mm(3)
- 8.64 mm(1)
- 8.71 mm(1)
- 8.76 mm(2)
- 8.89 mm(1)
- 8.97 mm(4)
- 9.0 mm(11)
- 9.5 mm(5)
- 9.52 mm(3)
- 9.65 mm(3)
- 9.959 mm(1)
- 9.98 mm(7)
- 10.0 mm(7)
- 10.31 mm(1)
- 10.312 mm(4)
- 10.34 mm(2)
- 11.0 mm(23)
- 11.1 mm(3)
- 11.68 mm(7)
- 12.0 mm(9)
- 12.25 mm(1)
- 12.5 mm(17)
- 12.6 mm(1)
- 12.62 mm(1)
- 12.7 mm(17)
- 12.875 mm(1)
- 13.0 mm(23)
- 13.92 mm(1)
- 14.0 mm(1)
- 14.27 mm(1)
- 14.275 mm(4)
- 14.86 mm(4)
- 15.0 mm(2)
- 15.5 mm(1)
- 15.875 mm(3)
- 15.88 mm(1)
- 16.0 mm(10)
- 16.255 mm(1)
- 16.256 mm(3)
- 16.26 mm(2)
- 16.5 mm(1)
- 17.0 mm(35)
- 17.5 mm(1)
- 18.0 mm(1)
- 18.5 mm(1)
- 19.05 mm(5)
- 19.43 mm(4)
- 19.431 mm(1)
- 19.5 mm(1)
- 20.0 mm(19)
- 22.0 mm(32)
- 22.606 mm(1)
- 22.61 mm(3)
- 23.16 mm(2)
- 25.0 mm(62)
- 25.4 mm(18)
- 27.0 mm(25)
- 28.448 mm(1)
- 28.65 mm(1)
- 30.0 mm(1)
- 31.75 mm(38)
- 32.0 mm(99)
- 32.54 mm(3)
- 33.55 mm(1)
- 34.798 mm(1)
- 35.0 mm(13)
- 38.1 mm(12)
- 38.89 mm(2)
- 40.0 mm(32)
- 43.0 mm(1)
- 47.02 mm(1)
- 50.0 mm(12)
- 50.8 mm(5)
to
F Dimension
F Dimension
- 0.0 in(4)
- 0.024 in(1)
- 0.026 in(5)
- 0.041 in(4)
- 0.042 in(1)
- 0.046 in(1)
- 0.055 in(1)
- 0.057 in(5)
- 0.061 in(1)
- 0.07 in(3)
- 0.073 in(3)
- 0.076 in(3)
- 0.088 in(3)
- 0.095 in(11)
- 0.104 in(17)
- 0.111 in(4)
- 0.116 in(8)
- 0.117 in(2)
- 0.119 in(5)
- 0.12 in(2)
- 0.122 in(5)
- 0.123 in(1)
- 0.125 in(2)
- 0.126 in(10)
- 0.134 in(2)
- 0.135 in(1)
- 0.142 in(1)
- 0.143 in(1)
- 0.145 in(14)
- 0.146 in(3)
- 0.147 in(4)
- 0.151 in(1)
- 0.152 in(4)
- 0.154 in(2)
- 0.155 in(2)
- 0.156 in(15)
- 0.1575 in(1)
- 0.168 in(1)
- 0.174 in(3)
- 0.175 in(2)
- 0.1772 in(4)
- 0.185 in(6)
- 0.187 in(15)
- 0.189 in(1)
- 0.1969 in(2)
- 0.2047 in(1)
- 0.2087 in(2)
- 0.211 in(3)
- 0.218 in(2)
- 0.22 in(7)
- 0.221 in(9)
- 0.223 in(1)
- 0.228 in(5)
- 0.2313 in(2)
- 0.234 in(2)
- 0.236 in(4)
- 0.2362 in(6)
- 0.25 in(9)
- 0.251 in(4)
- 0.258 in(1)
- 0.26 in(2)
- 0.268 in(1)
- 0.2707 in(1)
- 0.272 in(1)
- 0.273 in(2)
- 0.2756 in(8)
- 0.276 in(6)
- 0.278 in(2)
- 0.28 in(1)
- 0.287 in(1)
- 0.296 in(10)
- 0.297 in(1)
- 0.312 in(13)
- 0.315 in(1)
- 0.32 in(2)
- 0.338 in(2)
- 0.339 in(3)
- 0.34 in(1)
- 0.343 in(1)
- 0.345 in(2)
- 0.35 in(1)
- 0.353 in(4)
- 0.354 in(3)
- 0.3543 in(8)
- 0.374 in(4)
- 0.3748 in(1)
- 0.375 in(2)
- 0.38 in(3)
- 0.3921 in(1)
- 0.393 in(8)
- 0.3937 in(4)
- 0.394 in(2)
- 0.406 in(5)
- 0.407 in(2)
- 0.433 in(4)
- 0.4331 in(19)
- 0.437 in(3)
- 0.46 in(7)
- 0.472 in(4)
- 0.4724 in(5)
- 0.4823 in(1)
- 0.492 in(1)
- 0.4921 in(16)
- 0.496 in(1)
- 0.497 in(1)
- 0.5 in(17)
- 0.5069 in(1)
- 0.5118 in(17)
- 0.512 in(6)
- 0.548 in(1)
- 0.5512 in(1)
- 0.562 in(5)
- 0.585 in(4)
- 0.5906 in(2)
- 0.61 in(1)
- 0.625 in(4)
- 0.6299 in(9)
- 0.63 in(1)
- 0.64 in(6)
- 0.6496 in(1)
- 0.669 in(18)
- 0.6693 in(17)
- 0.689 in(1)
- 0.709 in(1)
- 0.7283 in(1)
- 0.75 in(5)
- 0.765 in(5)
- 0.768 in(1)
- 0.787 in(2)
- 0.7874 in(17)
- 0.866 in(18)
- 0.8661 in(14)
- 0.89 in(4)
- 0.912 in(2)
- 0.984 in(18)
- 0.9843 in(44)
- 1.0 in(18)
- 1.06 in(1)
- 1.063 in(24)
- 1.12 in(1)
- 1.128 in(1)
- 1.181 in(1)
- 1.25 in(38)
- 1.2598 in(58)
- 1.26 in(42)
- 1.281 in(3)
- 1.321 in(1)
- 1.37 in(1)
- 1.378 in(13)
- 1.5 in(12)
- 1.531 in(2)
- 1.5748 in(13)
- 1.575 in(19)
- 1.693 in(1)
- 1.851 in(1)
- 1.9685 in(5)
- 1.969 in(6)
- 1.9895 in(1)
- 2.0 in(5)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.575 mm(5)
- 2.388 mm(5)
- 2.794 mm(1)
- 3.175 mm(5)
- 3.556 mm(1)
- 3.962 mm(3)
- 4.445 mm(3)
- 4.57 mm(11)
- 4.75 mm(3)
- 5.18 mm(7)
- 5.182 mm(1)
- 5.28 mm(9)
- 5.54 mm(4)
- 5.69 mm(2)
- 5.78 mm(1)
- 5.79 mm(6)
- 5.791 mm(1)
- 5.94 mm(11)
- 6.2 mm(1)
- 6.35 mm(2)
- 6.6 mm(2)
- 6.78 mm(1)
- 6.91 mm(2)
- 6.98 mm(10)
- 7.06 mm(3)
- 7.08 mm(2)
- 7.09 mm(2)
- 7.24 mm(16)
- 7.42 mm(4)
- 7.52 mm(15)
- 7.92 mm(2)
- 7.925 mm(1)
- 8.0 mm(3)
- 8.18 mm(2)
- 8.61 mm(1)
- 8.81 mm(3)
- 9.04 mm(6)
- 9.09 mm(15)
- 9.14 mm(7)
- 9.16 mm(1)
- 9.98 mm(1)
- 10.0 mm(2)
- 10.01 mm(1)
- 10.16 mm(2)
- 10.34 mm(1)
- 10.49 mm(1)
- 10.5 mm(2)
- 10.67 mm(1)
- 10.68 mm(1)
- 10.74 mm(4)
- 11.0 mm(8)
- 11.13 mm(13)
- 11.15 mm(1)
- 11.38 mm(1)
- 11.89 mm(1)
- 12.14 mm(1)
- 12.19 mm(5)
- 12.192 mm(2)
- 12.22 mm(2)
- 12.5 mm(1)
- 12.9 mm(1)
- 13.0 mm(14)
- 13.08 mm(4)
- 13.16 mm(1)
- 13.34 mm(2)
- 13.67 mm(3)
- 13.72 mm(2)
- 13.84 mm(1)
- 14.3 mm(10)
- 15.24 mm(10)
- 15.32 mm(1)
- 15.37 mm(1)
- 15.39 mm(1)
- 15.88 mm(1)
- 16.0 mm(13)
- 16.26 mm(2)
- 16.38 mm(3)
- 16.967 mm(1)
- 16.97 mm(2)
- 17.02 mm(1)
- 17.09 mm(2)
- 17.25 mm(1)
- 17.27 mm(3)
- 17.48 mm(1)
- 18.29 mm(7)
- 18.54 mm(1)
- 18.542 mm(1)
- 19.05 mm(1)
- 19.43 mm(1)
- 19.558 mm(3)
- 19.56 mm(2)
- 20.0 mm(20)
- 20.24 mm(2)
- 21.59 mm(7)
- 23.62 mm(5)
- 23.622 mm(5)
- 23.75 mm(1)
- 24.61 mm(3)
- 24.89 mm(1)
- 24.892 mm(4)
- 25.0 mm(22)
- 27.0 mm(2)
- 27.94 mm(4)
- 30.48 mm(5)
- 30.988 mm(1)
- 32.0 mm(30)
- 33.02 mm(3)
- 37.0 mm(1)
- 37.338 mm(1)
- 37.34 mm(4)
- 40.0 mm(30)
- 43.307 mm(1)
- 44.7 mm(3)
- 44.704 mm(1)
- 45.0 mm(1)
- 48.0 mm(1)
- 50.0 mm(25)
- 50.8 mm(1)
- 52.0 mm(1)
- 55.0 mm(1)
- 60.0 mm(3)
- 60.96 mm(3)
- 63.0 mm(6)
- 63.5 mm(1)
- 70.0 mm(3)
- 76.96 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.062 in(5)
- 0.094 in(5)
- 0.11 in(1)
- 0.125 in(5)
- 0.14 in(1)
- 0.156 in(3)
- 0.175 in(3)
- 0.18 in(11)
- 0.187 in(3)
- 0.204 in(8)
- 0.208 in(9)
- 0.218 in(4)
- 0.224 in(2)
- 0.228 in(8)
- 0.234 in(11)
- 0.244 in(1)
- 0.25 in(2)
- 0.26 in(2)
- 0.267 in(1)
- 0.272 in(2)
- 0.275 in(11)
- 0.278 in(3)
- 0.279 in(3)
- 0.2791 in(1)
- 0.285 in(16)
- 0.292 in(4)
- 0.296 in(15)
- 0.312 in(3)
- 0.315 in(3)
- 0.322 in(2)
- 0.339 in(1)
- 0.347 in(3)
- 0.356 in(6)
- 0.358 in(15)
- 0.36 in(8)
- 0.3937 in(2)
- 0.394 in(1)
- 0.4 in(2)
- 0.407 in(1)
- 0.413 in(3)
- 0.42 in(2)
- 0.423 in(4)
- 0.433 in(4)
- 0.4331 in(4)
- 0.438 in(13)
- 0.439 in(1)
- 0.448 in(1)
- 0.468 in(1)
- 0.478 in(1)
- 0.48 in(7)
- 0.481 in(2)
- 0.492 in(1)
- 0.508 in(1)
- 0.5118 in(9)
- 0.512 in(5)
- 0.515 in(4)
- 0.518 in(1)
- 0.525 in(2)
- 0.538 in(3)
- 0.54 in(1)
- 0.545 in(1)
- 0.563 in(10)
- 0.6 in(10)
- 0.603 in(1)
- 0.605 in(1)
- 0.606 in(1)
- 0.625 in(1)
- 0.6299 in(8)
- 0.63 in(5)
- 0.64 in(2)
- 0.645 in(3)
- 0.668 in(3)
- 0.67 in(1)
- 0.673 in(2)
- 0.679 in(1)
- 0.68 in(3)
- 0.688 in(1)
- 0.72 in(7)
- 0.73 in(2)
- 0.75 in(1)
- 0.765 in(1)
- 0.77 in(5)
- 0.787 in(4)
- 0.7874 in(16)
- 0.797 in(2)
- 0.85 in(7)
- 0.93 in(10)
- 0.935 in(1)
- 0.969 in(3)
- 0.98 in(5)
- 0.984 in(3)
- 0.9843 in(19)
- 1.063 in(2)
- 1.1 in(4)
- 1.2 in(5)
- 1.22 in(1)
- 1.2598 in(14)
- 1.26 in(16)
- 1.3 in(3)
- 1.457 in(1)
- 1.47 in(5)
- 1.5748 in(13)
- 1.575 in(17)
- 1.705 in(1)
- 1.76 in(4)
- 1.772 in(1)
- 1.8898 in(1)
- 1.9685 in(13)
- 1.969 in(12)
- 2.0 in(1)
- 2.047 in(1)
- 2.1654 in(1)
- 2.3622 in(3)
- 2.4 in(3)
- 2.48 in(4)
- 2.4803 in(2)
- 2.5 in(1)
- 2.7559 in(3)
- 3.03 in(2)
- 5.4 in(1)
to
Cutting Direction
Cutting Direction
- B (388)
- E (251)
- P (14)
- S (274)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (316)
- DOUBLE POSITIVE (1)
- NEGATIVE-ZERO (214)
- NEUTRAL (ZERO) (183)
- POSITIVE-NEGATIVE (3)
- POSITIVE-ZERO (181)
Maximum Bore Depth
Maximum Bore Depth
- 0.187 in(1)
- 0.213 in(2)
- 0.281 in(3)
- 0.312 in(3)
- 0.375 in(4)
- 0.484 in(1)
- 0.5 in(18)
- 0.6 in(1)
- 0.625 in(2)
- 0.628 in(2)
- 0.75 in(17)
- 0.788 in(3)
- 0.825 in(1)
- 0.875 in(6)
- 0.9 in(2)
- 0.936 in(3)
- 0.942 in(1)
- 0.9432 in(1)
- 0.944 in(2)
- 1.0 in(28)
- 1.012 in(1)
- 1.122 in(3)
- 1.125 in(16)
- 1.182 in(2)
- 1.24 in(1)
- 1.25 in(22)
- 1.26 in(3)
- 1.416 in(6)
- 1.4172 in(3)
- 1.5 in(47)
- 1.56 in(3)
- 1.5748 in(9)
- 1.576 in(2)
- 1.872 in(8)
- 1.875 in(10)
- 1.88 in(3)
- 1.888 in(1)
- 1.8896 in(1)
- 1.89 in(12)
- 2.0 in(19)
- 2.125 in(1)
- 2.25 in(11)
- 2.358 in(2)
- 2.3622 in(3)
- 2.5 in(15)
- 2.5196 in(11)
- 2.52 in(2)
- 2.832 in(1)
- 2.8344 in(8)
- 3.0 in(35)
- 3.148 in(1)
- 3.1496 in(6)
- 3.16 in(2)
- 3.75 in(8)
- 3.7794 in(8)
- 3.78 in(2)
- 3.92 in(5)
- 3.936 in(12)
- 3.9372 in(8)
- 4.0 in(9)
- 4.5 in(5)
- 4.7244 in(11)
- 5.0 in(6)
- 5.0392 in(4)
- 5.04 in(19)
- 5.9058 in(6)
- 6.0 in(8)
- 6.28 in(3)
- 6.2992 in(4)
- 6.3 in(10)
- 7.5588 in(1)
- 7.876 in(4)
- 7.88 in(2)
- 8.0 in(4)
- 10.0 in(2)
to
Maximum Bore Depth
Maximum Bore Depth
- 4.75 mm(1)
- 5.41 mm(2)
- 7.137 mm(3)
- 7.925 mm(3)
- 9.525 mm(4)
- 12.3 mm(1)
- 12.7 mm(18)
- 15.24 mm(1)
- 15.875 mm(2)
- 16.0 mm(2)
- 19.04 mm(1)
- 19.048 mm(7)
- 19.05 mm(9)
- 20.0 mm(3)
- 20.955 mm(1)
- 22.22 mm(3)
- 22.225 mm(2)
- 22.23 mm(1)
- 22.86 mm(2)
- 23.76 mm(3)
- 24.0 mm(4)
- 25.39 mm(1)
- 25.4 mm(27)
- 25.72 mm(1)
- 28.56 mm(4)
- 28.57 mm(1)
- 28.572 mm(10)
- 28.578 mm(1)
- 28.58 mm(3)
- 30.0 mm(2)
- 31.748 mm(5)
- 31.75 mm(16)
- 31.76 mm(1)
- 32.0 mm(4)
- 35.0 mm(3)
- 36.0 mm(9)
- 38.04 mm(6)
- 38.08 mm(9)
- 38.1 mm(29)
- 38.12 mm(3)
- 40.0 mm(14)
- 47.55 mm(1)
- 47.58 mm(6)
- 47.61 mm(1)
- 47.62 mm(3)
- 47.622 mm(6)
- 47.628 mm(1)
- 48.0 mm(17)
- 50.8 mm(19)
- 53.975 mm(1)
- 57.12 mm(8)
- 57.15 mm(3)
- 60.0 mm(5)
- 63.48 mm(4)
- 63.5 mm(7)
- 63.52 mm(4)
- 64.0 mm(13)
- 72.0 mm(9)
- 76.2 mm(34)
- 76.4 mm(1)
- 80.0 mm(9)
- 95.22 mm(7)
- 95.25 mm(1)
- 96.0 mm(10)
- 100.0 mm(25)
- 101.6 mm(9)
- 114.24 mm(3)
- 114.3 mm(2)
- 120.0 mm(11)
- 126.8 mm(2)
- 127.0 mm(4)
- 128.0 mm(23)
- 150.0 mm(6)
- 152.4 mm(8)
- 160.0 mm(17)
- 192.0 mm(1)
- 200.0 mm(6)
- 203.2 mm(4)
- 254.0 mm(2)
to
Boring Bar Material
Boring Bar Material
- C (184)
- S (301)
Front-End
Clamp Style
Clamp Style
- C (32)
- D (193)
- M (42)
- N (3)
- P (135)
- S (484)
Cutting Width
Cutting Width
- 0.025 in(1)
- 0.03 in(5)
- 0.04 in(1)
- 0.05 in(1)
- 0.06 in(3)
to
Cutting Width
Cutting Width
- 0.635 mm(1)
- 0.762 mm(5)
- 1.016 mm(1)
- 1.27 mm(1)
- 1.524 mm(3)
to
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (1035)
- D-DIAMOND/RHOMBIC 55 (526)
- E-DIAMOND/RHOMBIC 75 (1)
- G-RHOMBIC 45 (44)
- GROOVING/CUTOFF MISC (6)
- L-RECTANGLE 90 (8)
- N/K-PARALLELOGRAM 55 (2)
- R-ROUND (106)
- S-SQUARE 90 (435)
- T-TRIANGLE 60 (705)
- THREADING (6)
- V-DIAMOND/RHOMBIC 35 (251)
- W-TRIGON 80 (262)
Cartridge Size
Cartridge Size
- 08 - mm of Cutting Height (3)
- 10 - mm of Cutting Height (7)
- 12 - mm of Cutting Height (11)
- 16 - mm of Cutting Height (3)
- 20 - mm of Cutting Height (3)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.017 in(1)
- 0.028 in(1)
- 0.03 in(1)
- 0.032 in(2)
- 0.035 in(1)
- 0.04 in(3)
- 0.05 in(2)
- 0.06 in(2)
- 0.062 in(2)
- 0.075 in(1)
- 0.078 in(1)
- 0.09 in(6)
- 0.091 in(4)
- 0.093 in(3)
- 0.098 in(1)
- 0.102 in(1)
- 0.11 in(1)
- 0.116 in(1)
- 0.119 in(2)
- 0.12 in(4)
- 0.121 in(3)
- 0.125 in(5)
- 0.13 in(2)
- 0.146 in(1)
- 0.147 in(1)
- 0.168 in(1)
- 0.1832 in(1)
- 0.187 in(1)
- 0.6299 in(2)
- 0.748 in(1)
- 0.7756 in(2)
- 0.7874 in(2)
- 0.9843 in(3)
- 1.1024 in(1)
- 1.1417 in(2)
- 1.378 in(1)
- 1.4961 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 0.432 mm(1)
- 0.711 mm(1)
- 0.762 mm(1)
- 0.813 mm(2)
- 0.889 mm(1)
- 1.016 mm(1)
- 1.02 mm(2)
- 1.27 mm(2)
- 1.52 mm(2)
- 1.57 mm(1)
- 1.575 mm(1)
- 1.91 mm(1)
- 1.981 mm(1)
- 2.27 mm(2)
- 2.28 mm(1)
- 2.29 mm(3)
- 2.31 mm(3)
- 2.32 mm(1)
- 2.36 mm(3)
- 2.49 mm(1)
- 2.59 mm(1)
- 2.81 mm(1)
- 2.94 mm(1)
- 3.02 mm(2)
- 3.04 mm(2)
- 3.05 mm(2)
- 3.07 mm(3)
- 3.17 mm(1)
- 3.18 mm(4)
- 3.3 mm(2)
- 3.7 mm(1)
- 3.73 mm(1)
- 4.27 mm(1)
- 4.655 mm(1)
- 4.75 mm(1)
- 16.0 mm(2)
- 19.0 mm(1)
- 19.7 mm(2)
- 20.0 mm(2)
- 25.0 mm(3)
- 28.0 mm(1)
- 29.0 mm(2)
- 35.0 mm(4)
- 38.0 mm(1)
to
Thread TPI
Thread TPI
- 24.0 (2)
- 48.0 (1)
to
Thread Pitch
Thread Pitch
- 1.0 mm(1)
- 2.5 mm(2)
to
Thread Pitch
Thread Pitch
- 1.0 in(1)
- 2.5 in(2)
to
Insert Geometry
Shape
Shape
- C-DIAMOND/RHOMBIC 80 (721)
- D-DIAMOND/RHOMBIC 55 (385)
- E-DIAMOND/RHOMBIC 75 (1)
- G-RHOMBIC 45 (17)
- GROOVING/CUTOFF MISC (4)
- L-RECTANGLE 90 (8)
- R-ROUND (80)
- S-SQUARE 90 (342)
- T-TRIANGLE 60 (518)
- THREADING (3)
- V-DIAMOND/RHOMBIC 35 (190)
- W-TRIGON 80 (198)
Insert IC Size
Insert IC Size
- 3.967 mm(10)
- 3.969 mm(30)
- 4.064 mm(28)
- 4.076 mm(4)
- 4.146 mm(1)
- 4.76 mm(1)
- 4.762 mm(4)
- 4.763 mm(4)
- 4.831 mm(3)
- 6.0 mm(6)
- 6.35 mm(227)
- 7.14 mm(12)
- 7.938 mm(2)
- 8.0 mm(5)
- 9.52 mm(10)
- 9.525 mm(776)
- 9.804 mm(1)
- 10.0 mm(8)
- 12.0 mm(9)
- 12.7 mm(969)
- 15.875 mm(137)
- 16.0 mm(6)
- 19.05 mm(169)
- 20.0 mm(7)
- 25.0 mm(3)
- 25.4 mm(23)
- 32.0 mm(2)
to
Insert IC Size
Insert IC Size
- 0.1562 in(19)
- 0.1563 in(21)
- 0.1575 in(2)
- 0.16 in(26)
- 0.1605 in(4)
- 0.1632 in(1)
- 0.1875 in(9)
- 0.1902 in(3)
- 0.2362 in(6)
- 0.25 in(227)
- 0.281 in(12)
- 0.3125 in(2)
- 0.315 in(5)
- 0.375 in(786)
- 0.386 in(1)
- 0.3937 in(8)
- 0.4724 in(9)
- 0.5 in(969)
- 0.625 in(137)
- 0.6299 in(6)
- 0.75 in(169)
- 0.7874 in(7)
- 0.9844 in(3)
- 1.0 in(23)
- 1.258 in(1)
- 1.2598 in(1)
to
Cutting Edge Length
Cutting Edge Length
- 3.257 mm(2)
- 3.258 mm(1)
- 3.26 mm(2)
- 4.03 mm(28)
- 4.036 mm(2)
- 4.057 mm(1)
- 4.344 mm(4)
- 5.61 mm(3)
- 5.611 mm(3)
- 5.76 mm(4)
- 6.448 mm(57)
- 6.45 mm(18)
- 6.472 mm(2)
- 6.515 mm(46)
- 6.73 mm(4)
- 6.83 mm(3)
- 7.036 mm(5)
- 7.039 mm(1)
- 7.04 mm(22)
- 7.18 mm(1)
- 7.74 mm(1)
- 7.75 mm(2)
- 7.752 mm(29)
- 8.06 mm(2)
- 8.687 mm(135)
- 8.69 mm(8)
- 9.525 mm(44)
- 9.67 mm(6)
- 9.672 mm(131)
- 10.999 mm(9)
- 11.0 mm(85)
- 11.071 mm(14)
- 11.594 mm(2)
- 11.625 mm(1)
- 11.628 mm(100)
- 11.63 mm(20)
- 12.208 mm(1)
- 12.45 mm(12)
- 12.7 mm(151)
- 12.896 mm(288)
- 12.9 mm(25)
- 13.148 mm(1)
- 13.891 mm(5)
- 15.5 mm(12)
- 15.504 mm(219)
- 15.875 mm(56)
- 16.12 mm(62)
- 16.461 mm(1)
- 16.498 mm(59)
- 16.5 mm(210)
- 16.51 mm(2)
- 16.606 mm(141)
- 16.61 mm(3)
- 16.658 mm(6)
- 16.98 mm(1)
- 19.05 mm(81)
- 19.344 mm(84)
- 19.38 mm(2)
- 21.997 mm(20)
- 22.0 mm(77)
- 22.142 mm(13)
- 25.4 mm(19)
- 25.792 mm(4)
- 27.496 mm(17)
- 30.0 mm(3)
- 33.0 mm(4)
- 40.0 mm(1)
to
Cutting Edge Length
Cutting Edge Length
- 0.128 in(2)
- 0.1282 in(2)
- 0.1283 in(1)
- 0.1587 in(8)
- 0.1589 in(2)
- 0.159 in(20)
- 0.1597 in(1)
- 0.171 in(4)
- 0.2209 in(3)
- 0.221 in(3)
- 0.227 in(4)
- 0.2359 in(3)
- 0.2538 in(2)
- 0.2539 in(66)
- 0.254 in(4)
- 0.2548 in(2)
- 0.2565 in(46)
- 0.265 in(4)
- 0.269 in(3)
- 0.277 in(27)
- 0.2771 in(1)
- 0.283 in(1)
- 0.305 in(1)
- 0.3052 in(31)
- 0.3173 in(2)
- 0.342 in(143)
- 0.375 in(44)
- 0.3808 in(131)
- 0.381 in(6)
- 0.433 in(42)
- 0.4331 in(52)
- 0.4359 in(14)
- 0.4565 in(2)
- 0.4577 in(10)
- 0.4578 in(101)
- 0.458 in(10)
- 0.4806 in(1)
- 0.49 in(12)
- 0.5 in(151)
- 0.5077 in(306)
- 0.5079 in(3)
- 0.508 in(4)
- 0.5176 in(1)
- 0.5469 in(5)
- 0.61 in(12)
- 0.6104 in(219)
- 0.6195 in(3)
- 0.625 in(56)
- 0.6346 in(62)
- 0.6481 in(1)
- 0.6495 in(56)
- 0.6496 in(192)
- 0.65 in(18)
- 0.6501 in(2)
- 0.6538 in(141)
- 0.654 in(3)
- 0.6558 in(6)
- 0.669 in(1)
- 0.75 in(81)
- 0.7616 in(84)
- 0.763 in(2)
- 0.866 in(20)
- 0.8661 in(74)
- 0.8666 in(3)
- 0.8717 in(13)
- 1.0 in(19)
- 1.0154 in(4)
- 1.0825 in(17)
- 1.1811 in(3)
- 1.2992 in(4)
- 1.5748 in(1)
to
Chip Breaker CBMD
Chip Breaker CBMD
- 04 (6)
- 13 (2)
- 16 (1)
- 18 (1)
- 1P (138)
- 22 (3)
- 2P (40)
- 41 (1)
- 43 (3)
- 4P (23)
- 5 (16)
- 65 (49)
- 6P (52)
- 7N (41)
- 8 (12)
- AL (34)
- AL3 (4)
- B (11)
- CT (1)
- EMT (1)
- EN95 (1)
- FF (39)
- FP (101)
- FS (47)
- FW (7)
- HP (4)
- LF (20)
- ML (66)
- MP (74)
- MR (82)
- MS (94)
- MU (109)
- MW (11)
- N (2)
- RH (152)
- RU (42)
- SR (17)
- T (4)
- UF (55)
- UM (64)
- UR (229)
Cutting Tool Material
Cutting Tool Material
- B H (207)
- B L (447)
- C A (324)
- C N (261)
- D P (500)
- H T (277)
- H W (3116)
Tolerance Class
Tolerance Class
- G (313)
- H (144)
- M (1932)
- U (66)
Back-End
Connection Type
Connection Type
- BORING BAR (480)
- CYLINDRICAL (32)
- SQUARE SHANK (415)
Back-End Diameter
Back-End Diameter
- 3.96 mm(6)
- 3.962 mm(23)
- 4.0 mm(3)
- 4.76 mm(5)
- 4.762 mm(19)
- 4.763 mm(1)
- 5.0 mm(5)
- 6.0 mm(12)
- 6.34 mm(6)
- 6.35 mm(16)
- 7.925 mm(1)
- 7.93 mm(6)
- 7.932 mm(6)
- 7.937 mm(11)
- 7.938 mm(1)
- 8.0 mm(16)
- 9.52 mm(20)
- 9.524 mm(1)
- 9.525 mm(12)
- 9.53 mm(3)
- 10.0 mm(21)
- 12.0 mm(17)
- 12.7 mm(72)
- 15.87 mm(38)
- 15.875 mm(6)
- 15.88 mm(5)
- 16.0 mm(25)
- 19.04 mm(3)
- 19.045 mm(1)
- 19.05 mm(31)
- 19.1 mm(1)
- 20.0 mm(19)
- 25.0 mm(31)
- 25.4 mm(20)
- 30.0 mm(1)
- 31.7 mm(2)
- 31.75 mm(4)
- 32.0 mm(24)
- 38.1 mm(5)
- 40.0 mm(17)
- 50.0 mm(6)
- 50.8 mm(4)
- 63.5 mm(2)
to
Back-End Diameter
Back-End Diameter
- 0.375 in(1)
- 0.5 in(2)
- 0.625 in(1)
- 0.6299 in(1)
- 0.75 in(6)
- 1.0 in(5)
to
Shank Height
Shank Height
- 0.2756 in(1)
- 0.315 in(2)
- 0.3543 in(4)
- 0.375 in(1)
- 0.3937 in(4)
- 0.4331 in(1)
- 0.472 in(1)
- 0.4724 in(9)
- 0.5 in(6)
- 0.625 in(2)
- 0.6299 in(20)
- 0.63 in(2)
- 0.75 in(19)
- 0.787 in(15)
- 0.7874 in(50)
- 0.788 in(10)
- 0.9378 in(1)
- 0.984 in(37)
- 0.9843 in(70)
- 0.985 in(1)
- 1.0 in(45)
- 1.25 in(18)
- 1.2598 in(42)
- 1.26 in(34)
- 1.5 in(6)
- 1.5283 in(1)
- 1.5748 in(12)
- 1.575 in(8)
- 1.8488 in(2)
- 1.969 in(1)
to
Shank Height
Shank Height
- 7.0 mm(1)
- 8.0 mm(2)
- 9.0 mm(4)
- 9.52 mm(1)
- 10.0 mm(4)
- 11.0 mm(1)
- 12.0 mm(10)
- 12.7 mm(6)
- 15.88 mm(2)
- 16.0 mm(22)
- 19.05 mm(19)
- 20.0 mm(75)
- 23.82 mm(1)
- 25.0 mm(107)
- 25.03 mm(1)
- 25.4 mm(45)
- 31.75 mm(18)
- 32.0 mm(76)
- 38.1 mm(6)
- 38.82 mm(1)
- 40.0 mm(20)
- 46.96 mm(2)
- 50.0 mm(1)
to
Shank Width
Shank Width
- 0.315 in(2)
- 0.375 in(1)
- 0.3937 in(5)
- 0.472 in(1)
- 0.4724 in(9)
- 0.5 in(6)
- 0.625 in(2)
- 0.6299 in(20)
- 0.63 in(2)
- 0.75 in(19)
- 0.787 in(16)
- 0.7874 in(50)
- 0.788 in(9)
- 0.8646 in(1)
- 0.984 in(52)
- 0.9843 in(92)
- 1.0 in(49)
- 1.25 in(14)
- 1.2598 in(19)
- 1.26 in(22)
- 1.4551 in(1)
- 1.5 in(6)
- 1.5748 in(10)
- 1.575 in(8)
- 1.8488 in(2)
- 1.969 in(1)
to
Shank Width
Shank Width
- 8.0 mm(2)
- 9.52 mm(1)
- 10.0 mm(5)
- 12.0 mm(10)
- 12.7 mm(6)
- 15.88 mm(2)
- 16.0 mm(22)
- 19.05 mm(19)
- 20.0 mm(75)
- 21.96 mm(1)
- 25.0 mm(144)
- 25.4 mm(49)
- 31.75 mm(14)
- 32.0 mm(41)
- 36.96 mm(1)
- 38.1 mm(6)
- 40.0 mm(18)
- 46.96 mm(2)
- 50.0 mm(1)
to
No filters matching ""
