Grooving and Cut-Off
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (1276)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1276)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1276)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1276)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1276)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1276)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1276)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1276)
- M Stainless Steel (1351)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1351)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1351)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1351)
- K Cast Iron (1077)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1077)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1077)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1077)
- N Non-Ferrous Materials (1334)
- N1Wrought Aluminum (1334)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1334)
- N3High-Silicon Aluminum Alloys Si >12.2%(1333)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (120)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1333)
- N6Carbon, Graphite Composites, CFRP (1333)
- N7MMC's (119)
- S High-Temp Alloys (1342)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1342)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1342)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1342)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1342)
- H Hardened Materials (226)
- H1Hardened Materials 44-48 HRC(226)
- H2Hardened Materials 48-55 HRC(226)
- H3Hardened Materials 56-60 HRC(99)
- H4Hardened Materials >60 HRC(99)
Select All Star
- CN (132)
- DE (273)
- GB (19)
- IN (78)
- SG (64)
- US (398)
Applications
Applications
Back Boring (54)
Boring (12)
Chamfer Turning (36)
Cut-Off (487)
Deep Grooving (55)
Face Grooving (726)
Facing (124)
Grooving (968)
ID Facing (86)
ID Grooving (619)
ID Thread Turning (44)
Multiple Direction Cutting (20)
OD Thread Turning (67)
Plunge Turning (347)
Profiling (239)
Turning (151)
Type of Thread
Type of Thread
- 60 (107)
- ACME (66)
- API RD (45)
- BSW (23)
- BUTTRESS (22)
- STUB ACME (45)
- UN (93)
- UNJ (23)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (1211)
- Lightly Interrupted Cut (1237)
- Smooth Cut (1178)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (639)
to
Connection Style
Connection Style
- Boring Bar Shank (106)
- Cutoff Support Blade A1-A3 (15)
- Toolholder (415)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (576)
- 2.0 (822)
- 3.0 (2)
to
Over All Length [L]
Over All Length [L]
- 47.746 mm(5)
- 47.75 mm(5)
- 49.62 mm(4)
- 50.25 mm(1)
- 50.75 mm(2)
- 51.746 mm(3)
- 51.75 mm(1)
- 54.25 mm(2)
- 55.25 mm(2)
- 56.25 mm(14)
- 57.25 mm(2)
- 57.746 mm(3)
- 57.75 mm(1)
- 58.42 mm(3)
- 58.425 mm(1)
- 59.62 mm(4)
- 60.0 mm(2)
- 60.25 mm(10)
- 61.25 mm(2)
- 61.746 mm(1)
- 61.75 mm(1)
- 63.5 mm(1)
- 64.77 mm(8)
- 65.62 mm(2)
- 67.746 mm(3)
- 67.75 mm(1)
- 80.0 mm(1)
- 86.0 mm(1)
- 88.9 mm(1)
- 90.25 mm(3)
- 100.0 mm(15)
- 101.6 mm(2)
- 108.0 mm(1)
- 108.46 mm(2)
- 109.22 mm(2)
- 110.0 mm(3)
- 110.25 mm(4)
- 110.251 mm(1)
- 114.3 mm(58)
- 121.16 mm(2)
- 125.0 mm(70)
- 126.0 mm(3)
- 127.0 mm(42)
- 127.5 mm(10)
- 128.27 mm(4)
- 136.91 mm(2)
- 138.75 mm(2)
- 139.7 mm(2)
- 139.9 mm(6)
- 140.0 mm(2)
- 143.26 mm(3)
- 146.56 mm(1)
- 150.0 mm(103)
- 150.25 mm(10)
- 151.4 mm(6)
- 151.41 mm(4)
- 151.76 mm(3)
- 152.4 mm(111)
- 152.5 mm(8)
- 158.75 mm(2)
- 170.0 mm(26)
- 170.25 mm(2)
- 177.8 mm(14)
- 178.31 mm(2)
- 178.313 mm(1)
- 180.0 mm(6)
- 200.0 mm(23)
- 203.2 mm(13)
- 250.0 mm(10)
- 254.0 mm(12)
- 260.0 mm(1)
- 300.0 mm(6)
- 300.15 mm(1)
- 304.8 mm(9)
- 350.0 mm(1)
- 355.6 mm(7)
- 406.4 mm(4)
to
Availability
gsaApproval
gsaApproval
Corner Radius
Corner Radius
- 0.075 mm(171)
- 0.1 mm(262)
- 0.125 mm(23)
- 0.15 mm(146)
- 0.175 mm(205)
- 0.2 mm(514)
- 0.225 mm(80)
- 0.25 mm(167)
- 0.3 mm(298)
- 0.325 mm(157)
- 0.35 mm(46)
- 0.375 mm(19)
- 0.4 mm(261)
- 0.5 mm(43)
- 0.575 mm(132)
- 0.6 mm(209)
- 0.75 mm(222)
- 0.775 mm(149)
- 0.8 mm(160)
- 1.0 mm(159)
- 1.2 mm(136)
- 1.25 mm(64)
- 1.5 mm(233)
- 1.525 mm(58)
- 1.575 mm(49)
- 1.6 mm(143)
- 1.75 mm(88)
- 1.975 mm(48)
- 2.0 mm(141)
- 2.025 mm(34)
- 2.25 mm(47)
- 2.375 mm(49)
- 2.4 mm(96)
- 2.5 mm(83)
- 2.525 mm(38)
- 3.0 mm(64)
- 3.025 mm(33)
- 3.175 mm(88)
- 3.95 mm(37)
- 4.0 mm(37)
- 4.025 mm(15)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(831)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CG55 (1)
- CW2015 (1)
- THM (103)
- THM X (1)
- THM-F (1)
- THM-X (1)
- TN2000 (1)
- TN4000 (1)
- TN6010 (231)
- TN6025 (337)
- TN6030 (2)
- TTM08 (2)
- TTM09 (5)
- TTMS (1)
- TTR (2)
- TTR-X (2)
- TTS (2)
- WDN25U (1)
- WK20CT (2)
- WM35CT (1)
- WP10CT (216)
- WP15CT (2)
- WP25CT (214)
- WP35CT (2)
- WS25PT (66)
- WU10HT (155)
- WU10PT (512)
- WU25PT (784)
- WU35CT (13)
- WU35PT (141)
Hand Of Tool
Hand Of Tool
- L (237)
- N (18)
- R (281)
Wiper Insert
Wiper Insert
- N (1280)
- Y (155)
F Dimension
F Dimension
- 0.0 mm(2)
- 1.275 mm(2)
- 1.45 mm(2)
- 1.825 mm(3)
- 2.7 mm(2)
- 3.6 mm(1)
- 3.7 mm(1)
- 3.7005 mm(1)
- 4.7 mm(1)
- 5.7 mm(1)
- 6.553 mm(2)
- 7.0 mm(2)
- 7.5 mm(2)
- 8.525 mm(2)
- 9.0 mm(2)
- 9.525 mm(5)
- 9.53 mm(2)
- 10.0 mm(6)
- 10.312 mm(1)
- 11.0 mm(8)
- 11.062 mm(4)
- 11.1 mm(2)
- 11.94 mm(2)
- 12.0 mm(12)
- 12.7 mm(17)
- 13.0 mm(6)
- 13.945 mm(2)
- 13.969 mm(2)
- 14.27 mm(1)
- 14.275 mm(2)
- 15.86 mm(4)
- 15.87 mm(1)
- 15.875 mm(7)
- 15.88 mm(5)
- 15.9 mm(1)
- 15.94 mm(2)
- 15.97 mm(2)
- 15.973 mm(2)
- 16.0 mm(20)
- 16.09 mm(2)
- 16.256 mm(2)
- 17.0 mm(10)
- 17.304 mm(6)
- 17.475 mm(2)
- 17.48 mm(2)
- 19.04 mm(1)
- 19.048 mm(1)
- 19.05 mm(21)
- 19.08 mm(4)
- 19.085 mm(2)
- 19.13 mm(11)
- 19.135 mm(3)
- 19.152 mm(2)
- 19.431 mm(1)
- 19.94 mm(2)
- 20.0 mm(23)
- 20.06 mm(6)
- 20.11 mm(14)
- 22.0 mm(2)
- 22.225 mm(2)
- 24.94 mm(1)
- 25.0 mm(45)
- 25.06 mm(6)
- 25.11 mm(18)
- 25.16 mm(2)
- 25.21 mm(4)
- 25.336 mm(2)
- 25.4 mm(27)
- 25.425 mm(1)
- 25.43 mm(4)
- 25.435 mm(2)
- 25.451 mm(1)
- 25.48 mm(15)
- 25.485 mm(3)
- 25.5 mm(2)
- 25.502 mm(3)
- 25.58 mm(4)
- 25.71 mm(2)
- 26.0 mm(4)
- 26.01 mm(4)
- 27.0 mm(3)
- 29.0 mm(8)
- 29.01 mm(7)
- 31.74 mm(2)
- 31.75 mm(18)
- 31.83 mm(8)
- 31.93 mm(4)
- 32.0 mm(16)
- 32.06 mm(4)
- 32.08 mm(8)
- 32.18 mm(4)
- 32.3 mm(3)
- 32.306 mm(4)
- 32.41 mm(2)
- 32.537 mm(1)
- 32.656 mm(2)
- 33.0 mm(3)
- 34.925 mm(2)
- 35.0 mm(1)
- 38.1 mm(4)
- 38.28 mm(2)
- 38.41 mm(2)
- 38.76 mm(2)
- 40.0 mm(2)
- 40.18 mm(2)
- 40.306 mm(2)
- 40.656 mm(2)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 11.176 mm(2)
- 11.5 mm(2)
- 15.875 mm(2)
- 16.0 mm(2)
- 18.5 mm(2)
- 18.542 mm(2)
- 20.0 mm(8)
- 20.32 mm(1)
- 22.0 mm(2)
- 25.0 mm(8)
- 25.4 mm(2)
- 26.0 mm(2)
- 28.575 mm(1)
- 28.58 mm(1)
- 31.75 mm(6)
- 32.0 mm(6)
- 34.0 mm(4)
- 34.92 mm(2)
- 34.925 mm(2)
- 40.39 mm(4)
- 41.0 mm(4)
- 44.0 mm(2)
- 44.45 mm(2)
- 46.99 mm(7)
- 47.0 mm(8)
- 50.8 mm(2)
- 54.0 mm(7)
- 54.1 mm(3)
- 57.15 mm(3)
- 60.325 mm(1)
- 63.5 mm(3)
- 69.85 mm(2)
- 70.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(55)
- 11.176 mm(2)
- 11.5 mm(2)
- 15.875 mm(2)
- 16.0 mm(2)
- 18.5 mm(2)
- 18.542 mm(2)
- 20.0 mm(8)
- 20.32 mm(1)
- 22.0 mm(2)
- 25.0 mm(8)
- 25.4 mm(2)
- 26.0 mm(2)
- 28.575 mm(1)
- 28.58 mm(1)
- 30.0 mm(1)
- 31.75 mm(6)
- 32.0 mm(7)
- 34.0 mm(4)
- 34.92 mm(2)
- 34.925 mm(2)
- 38.0 mm(6)
- 40.39 mm(4)
- 41.0 mm(4)
- 41.3 mm(29)
- 44.0 mm(2)
- 44.45 mm(2)
- 46.99 mm(7)
- 47.0 mm(8)
- 47.6 mm(27)
- 50.8 mm(2)
- 52.0 mm(10)
- 54.0 mm(7)
- 54.1 mm(3)
- 55.88 mm(1)
- 56.625 mm(3)
- 57.15 mm(15)
- 57.2 mm(12)
- 60.325 mm(2)
- 63.5 mm(7)
- 69.85 mm(4)
- 70.0 mm(14)
- 76.2 mm(1)
- 88.9 mm(139)
- 100.0 mm(17)
- 101.6 mm(2)
- 139.7 mm(165)
- 174.6 mm(57)
- 209.6 mm(43)
- 222.3 mm(26)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(19)
- 25.999 mm(7)
- 26.0 mm(10)
- 26.975 mm(2)
- 28.575 mm(2)
- 31.75 mm(2)
- 32.0 mm(27)
- 52.0 mm(8)
- 70.0 mm(10)
- 100.0 mm(13)
- 101.6 mm(2)
- 203.2 mm(2)
- 205.0 mm(17)
- 406.4 mm(12)
- 9999.0 mm(471)
to
Cutting Direction
Cutting Direction
- E (434)
- S (102)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (52)
- NEUTRAL (ZERO) (106)
- POSITIVE-ZERO (43)
Maximum Bore Depth
Maximum Bore Depth
- 24.0 mm(2)
- 25.4 mm(9)
- 31.26 mm(1)
- 31.3 mm(1)
- 31.75 mm(4)
- 32.0 mm(2)
- 32.766 mm(1)
- 38.1 mm(5)
- 40.0 mm(2)
- 40.295 mm(2)
- 40.506 mm(2)
- 48.0 mm(2)
- 50.0 mm(10)
- 50.275 mm(2)
- 50.3 mm(2)
- 50.8 mm(19)
- 63.5 mm(5)
- 64.0 mm(15)
- 64.4 mm(2)
- 76.2 mm(2)
- 80.0 mm(5)
- 84.0 mm(2)
- 84.4 mm(2)
- 100.0 mm(4)
- 101.6 mm(6)
- 127.0 mm(3)
- 128.0 mm(2)
- 152.4 mm(2)
- 160.0 mm(3)
- 177.8 mm(2)
- 200.0 mm(1)
- 203.2 mm(4)
to
Boring Bar Material
Boring Bar Material
- S (106)
Front-End
Clamp Style
Clamp Style
- C (17)
- M (41)
- N (111)
- S (32)
- W (3)
- Y (386)
Cutting Width
Cutting Width
- 0.5 mm(42)
- 0.787 mm(46)
- 0.8 mm(43)
- 1.0 mm(93)
- 1.041 mm(24)
- 1.19 mm(41)
- 1.194 mm(82)
- 1.2 mm(90)
- 1.4 mm(51)
- 1.404 mm(4)
- 1.473 mm(41)
- 1.5 mm(122)
- 1.57 mm(70)
- 1.575 mm(119)
- 1.7 mm(42)
- 1.75 mm(88)
- 1.829 mm(47)
- 1.95 mm(43)
- 1.981 mm(49)
- 1.99 mm(40)
- 2.0 mm(234)
- 2.125 mm(69)
- 2.13 mm(42)
- 2.2 mm(88)
- 2.236 mm(25)
- 2.25 mm(65)
- 2.38 mm(21)
- 2.387 mm(96)
- 2.388 mm(191)
- 2.39 mm(48)
- 2.5 mm(167)
- 2.51 mm(68)
- 2.511 mm(68)
- 2.75 mm(90)
- 3.0 mm(274)
- 3.125 mm(70)
- 3.13 mm(70)
- 3.17 mm(112)
- 3.175 mm(227)
- 3.176 mm(69)
- 3.18 mm(71)
- 3.2 mm(47)
- 3.245 mm(41)
- 3.25 mm(23)
- 3.301 mm(68)
- 3.302 mm(68)
- 3.5 mm(102)
- 3.82 mm(25)
- 3.84 mm(41)
- 3.95 mm(33)
- 3.96 mm(59)
- 3.962 mm(49)
- 4.0 mm(188)
- 4.1 mm(2)
- 4.125 mm(52)
- 4.13 mm(46)
- 4.25 mm(24)
- 4.5 mm(70)
- 4.75 mm(50)
- 4.754 mm(49)
- 4.76 mm(37)
- 4.761 mm(49)
- 4.762 mm(52)
- 4.763 mm(52)
- 4.77 mm(41)
- 4.775 mm(48)
- 4.78 mm(37)
- 4.788 mm(11)
- 4.8 mm(49)
- 4.801 mm(77)
- 4.877 mm(50)
- 4.878 mm(50)
- 4.88 mm(25)
- 4.953 mm(24)
- 4.978 mm(47)
- 5.0 mm(99)
- 5.125 mm(29)
- 5.13 mm(50)
- 5.5 mm(10)
- 6.0 mm(86)
- 6.12 mm(33)
- 6.125 mm(35)
- 6.13 mm(42)
- 6.32 mm(32)
- 6.34 mm(32)
- 6.35 mm(99)
- 6.36 mm(42)
- 6.477 mm(33)
- 6.478 mm(33)
- 7.125 mm(32)
- 7.92 mm(39)
- 7.925 mm(23)
- 7.94 mm(14)
- 8.0 mm(44)
- 8.051 mm(23)
- 8.052 mm(23)
- 8.125 mm(26)
- 8.13 mm(24)
- 8.15 mm(2)
- 9.525 mm(9)
- 9.651 mm(10)
- 10.125 mm(10)
- 10.15 mm(3)
- 12.2 mm(6)
- 14.2 mm(1)
- 16.2 mm(4)
to
Insert Shape
Insert Shape
- PRISMATIC (911)
- T-TRIANGLE 60 (2)
- TN-TOP NOTCH (476)
Cartridge Size
Cartridge Size
- 50 (48)
- 65 (30)
Insert Size
Insert Size
- 1 (24)
- 10 (9)
- 12 (3)
- 16 (2)
- 2 (117)
- 2B (18)
- 3 (136)
- 4 (78)
- 5 (45)
- 6 (45)
- 8 (29)
Maximum Cutting Depth
Maximum Cutting Depth
- 1.69 mm(1)
- 3.505 mm(12)
- 3.51 mm(11)
- 5.0 mm(4)
- 5.33 mm(8)
- 5.334 mm(20)
- 5.715 mm(1)
- 7.0 mm(16)
- 7.468 mm(8)
- 7.47 mm(5)
- 8.0 mm(12)
- 8.484 mm(2)
- 10.0 mm(39)
- 10.668 mm(2)
- 10.67 mm(1)
- 11.0 mm(11)
- 11.176 mm(4)
- 11.18 mm(4)
- 12.0 mm(18)
- 12.5 mm(1)
- 12.7 mm(3)
- 12.9995 mm(7)
- 13.0 mm(14)
- 13.4875 mm(2)
- 14.0 mm(14)
- 14.22 mm(3)
- 14.224 mm(6)
- 14.2875 mm(2)
- 15.0 mm(1)
- 15.5 mm(2)
- 15.875 mm(3)
- 15.88 mm(10)
- 15.883 mm(1)
- 16.0 mm(88)
- 16.5 mm(10)
- 16.51 mm(8)
- 17.0 mm(1)
- 18.5 mm(2)
- 19.0 mm(24)
- 19.05 mm(21)
- 19.06 mm(1)
- 20.0 mm(3)
- 22.0 mm(43)
- 22.22 mm(4)
- 22.225 mm(4)
- 23.97 mm(5)
- 25.0 mm(13)
- 25.4 mm(19)
- 26.0 mm(46)
- 30.0 mm(3)
- 32.0 mm(28)
- 34.0 mm(1)
- 40.0 mm(15)
- 50.0 mm(3)
- 60.0 mm(3)
- 120.0 mm(1)
to
Gage Length
Gage Length
- 69.7800 mm(2)
- 82.4800 mm(2)
- 95.3600 mm(3)
- 98.2200 mm(2)
- 107.8800 mm(1)
- 108.0000 mm(1)
- 109.2200 mm(2)
- 126.0000 mm(3)
- 128.2700 mm(4)
- 138.1500 mm(2)
- 138.7500 mm(2)
- 139.2500 mm(4)
- 139.9000 mm(6)
- 140.4000 mm(8)
- 140.4100 mm(4)
- 140.5500 mm(2)
- 150.0000 mm(2)
- 151.4600 mm(3)
- 152.4000 mm(4)
- 158.1500 mm(2)
- 158.7500 mm(2)
- 159.2500 mm(2)
- 165.9500 mm(2)
- 170.0000 mm(2)
- 171.4500 mm(3)
- 177.8000 mm(2)
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.64 mm(3)
- 0.76 mm(3)
- 0.762 mm(27)
- 1.015 mm(2)
- 1.016 mm(49)
- 1.02 mm(4)
- 1.09 mm(9)
- 1.092 mm(33)
- 1.335 mm(3)
- 1.97 mm(2)
- 1.981 mm(2)
- 2.54 mm(3)
- 2.75 mm(2)
- 2.92 mm(9)
- 2.921 mm(23)
- 3.81 mm(12)
- 3.84 mm(2)
- 3.86 mm(1)
to
Insert Geometry
Shape
Shape
- PRISMATIC (385)
- TN-TOP NOTCH (365)
Insert Seat Size
Insert Seat Size
- 1 (8)
- 10 (7)
- 12 (3)
- 14 (1)
- 16 (1)
- 1B (8)
- 2 (164)
- 2B (10)
- 3 (289)
- 4 (123)
- 5 (46)
- 6 (53)
- 8 (37)
Cutting Tool Material
Cutting Tool Material
- C A (1)
- D P (1)
- H W (1376)
Back-End
Connection Type
Connection Type
- BORING BAR (106)
- CUTOFF BLADE (15)
- SQUARE SHANK (409)
Back-End Diameter
Back-End Diameter
- 9.525 mm(1)
- 10.0 mm(1)
- 12.0 mm(5)
- 12.7 mm(5)
- 15.875 mm(7)
- 16.0 mm(6)
- 19.05 mm(6)
- 20.0 mm(6)
- 25.0 mm(14)
- 25.4 mm(17)
- 31.7 mm(2)
- 31.75 mm(9)
- 32.0 mm(10)
- 38.1 mm(6)
- 40.0 mm(7)
- 44.45 mm(2)
- 50.0 mm(1)
- 50.8 mm(4)
to
Shank Height
Shank Height
- 9.525 mm(6)
- 9.53 mm(2)
- 10.0 mm(6)
- 12.0 mm(15)
- 12.7 mm(12)
- 12.71 mm(4)
- 15.875 mm(10)
- 15.88 mm(12)
- 16.0 mm(24)
- 19.0 mm(3)
- 19.05 mm(55)
- 20.0 mm(51)
- 24.84 mm(10)
- 25.0 mm(88)
- 25.019 mm(1)
- 25.02 mm(1)
- 25.146 mm(4)
- 25.4 mm(86)
- 25.97 mm(1)
- 26.0 mm(5)
- 31.75 mm(39)
- 31.975 mm(1)
- 32.0 mm(40)
- 38.1 mm(16)
- 38.104 mm(1)
- 40.0 mm(9)
- 52.5 mm(1)
to
Shank Width
Shank Width
- 1.65 mm(3)
- 1.8 mm(4)
- 2.4 mm(2)
- 3.2 mm(1)
- 3.4 mm(2)
- 4.4 mm(1)
- 5.4 mm(1)
- 7.0 mm(2)
- 9.525 mm(6)
- 9.53 mm(2)
- 10.0 mm(6)
- 11.69 mm(2)
- 12.0 mm(13)
- 12.7 mm(12)
- 12.71 mm(4)
- 13.0 mm(1)
- 15.84 mm(2)
- 15.86 mm(2)
- 15.875 mm(10)
- 15.88 mm(12)
- 16.0 mm(20)
- 18.0 mm(2)
- 19.05 mm(53)
- 19.84 mm(1)
- 19.86 mm(2)
- 20.0 mm(46)
- 20.625 mm(2)
- 23.165 mm(1)
- 24.486 mm(1)
- 24.84 mm(10)
- 25.0 mm(88)
- 25.146 mm(4)
- 25.4 mm(80)
- 26.97 mm(3)
- 26.975 mm(4)
- 27.026 mm(1)
- 28.042 mm(1)
- 30.66 mm(1)
- 31.75 mm(39)
- 32.0 mm(36)
- 38.1 mm(13)
- 38.104 mm(1)
- 40.0 mm(6)
to
No filters matching ""
