ROTAFLEX™
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (3)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(3)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(3)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(3)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3)
- M Stainless Steel (3)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3)
- K Cast Iron (3)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(3)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(3)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(3)
- N Non-Ferrous Materials (3)
- N1Wrought Aluminum (3)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3)
- N3High-Silicon Aluminum Alloys Si >12.2%(3)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3)
- N6Carbon, Graphite Composites, CFRP (3)
- N7MMC's (3)
- S High-Temp Alloys (3)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3)
- H Hardened Materials (3)
- H1Hardened Materials 44-48 HRC(3)
- H2Hardened Materials 48-55 HRC(3)
- H3Hardened Materials 56-60 HRC(3)
- H4Hardened Materials >60 HRC(3)
Applications
Applications
Blind Hole Finishing (3)
Through Hole Finishing (3)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (3)
- Lightly Interrupted Cut (3)
- Smooth Cut (3)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 53.0 (1)
- 90.0 (2)
- 95.0 (1)
to
Over All Length [L]
Over All Length [L]
- 1.7913 in(3)
- 1.811 in(1)
to
Over All Length [L]
Over All Length [L]
- 45.5 mm(3)
- 46.0 mm(1)
to
Corner Radius
Corner Radius
- 0.004 in(1)
- 0.008 in(3)
- 0.016 in(3)
- 0.031 in(3)
to
Corner Radius
Corner Radius
- 0.1 mm(1)
- 0.2 mm(3)
- 0.4 mm(3)
- 0.8 mm(3)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(3)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(3)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- HCK10 (2)
- HWK10 (1)
- PB100 (2)
- THM (3)
- THM-X (2)
- TN10P (3)
- TN10U (3)
- TN15M (1)
- TN15U (2)
- TN2000 (2)
- TN20K (3)
- TN20P (3)
- TN30M (2)
- TN4000 (2)
- TTR (3)
- TTS (2)
- WBH10U (3)
- WBH20P (1)
- WDN00U (2)
- WDN25U (3)
- WK05CT (1)
- WK15CT (3)
- WK20CT (3)
- WM15CT (2)
- WM25CT (3)
- WP15CT (3)
- WP20TT (3)
- WP25CT (3)
- WS10PT (2)
- WS25PT (2)
- WU05PT (3)
- WU10HT (3)
- WU10PT (3)
- WU25PT (3)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 50.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.9685 in(1)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 2.5591 in(1)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 65.0 mm(1)
to
Front-End
Clamp Style
Clamp Style
- S (1)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (2)
- D-DIAMOND/RHOMBIC 55 (1)
- T-TRIANGLE 60 (2)
Maximum Cutting Depth
Maximum Cutting Depth
- 1.2796 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 32.5 mm(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (3)
- B L (1)
- D P (3)
- H T (3)
- H W (3)
No filters matching ""
