External Machining • Tool Holders
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (387)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(387)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(387)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(387)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(387)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(387)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(387)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(387)
- M Stainless Steel (360)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(360)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(357)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(357)
- K Cast Iron (394)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(394)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(394)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(392)
- N Non-Ferrous Materials (371)
- N1Wrought Aluminum (371)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(371)
- N3High-Silicon Aluminum Alloys Si >12.2%(180)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (370)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (189)
- N6Carbon, Graphite Composites, CFRP (187)
- N7MMC's (186)
- S High-Temp Alloys (388)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(388)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(388)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(388)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(366)
- H Hardened Materials (289)
- H1Hardened Materials 44-48 HRC(289)
- H2Hardened Materials 48-55 HRC(289)
- H3Hardened Materials 56-60 HRC(289)
- H4Hardened Materials >60 HRC(289)
Select All Star
- DE (41)
- IN (8)
- SG (7)
- US (11)
Applications
Applications
Chamfer Turning (3)
Facing (282)
Multiple Direction Cutting (315)
Profiling (291)
Turning (397)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (369)
- Lightly Interrupted Cut (388)
- Smooth Cut (396)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (46)
- 50.0 (2)
- 60.0 (2)
- 62.5 (7)
- 63.0 (7)
- 72.5 (8)
- 75.0 (59)
- 90.0 (55)
- 93.0 (96)
- 95.0 (105)
- 107.5 (17)
- 117.5 (5)
to
Connection Style
Connection Style
- Boring Bar Shank (5)
- Toolholder (404)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (213)
- 2.0 (209)
- 3.0 (53)
- 4.0 (244)
- 6.0 (53)
- 8.0 (138)
to
Over All Length [L]
Over All Length [L]
- 2.5 in(1)
- 2.7559 in(3)
- 3.1496 in(9)
- 3.15 in(1)
- 3.5 in(5)
- 3.937 in(22)
- 4.0 in(2)
- 4.5 in(18)
- 4.911 in(1)
- 4.921 in(26)
- 4.9213 in(46)
- 5.0 in(6)
- 5.5118 in(1)
- 5.896 in(1)
- 5.9055 in(60)
- 5.906 in(46)
- 6.0 in(65)
- 6.6929 in(39)
- 6.693 in(34)
- 6.732 in(1)
- 7.874 in(3)
- 9.8425 in(7)
- 9.843 in(9)
- 11.811 in(3)
to
Over All Length [L]
Over All Length [L]
- 63.5 mm(1)
- 70.0 mm(3)
- 80.0 mm(10)
- 88.9 mm(5)
- 100.0 mm(22)
- 101.6 mm(2)
- 114.3 mm(18)
- 124.75 mm(1)
- 125.0 mm(72)
- 127.0 mm(6)
- 140.0 mm(1)
- 149.75 mm(1)
- 150.0 mm(106)
- 152.4 mm(65)
- 170.0 mm(73)
- 171.0 mm(1)
- 200.0 mm(3)
- 250.0 mm(16)
- 300.0 mm(3)
to
Corner Radius
Corner Radius
- 0.004 in(134)
- 0.008 in(174)
- 0.016 in(301)
- 0.024 in(18)
- 0.031 in(368)
- 0.047 in(342)
- 0.063 in(210)
- 0.094 in(37)
- 0.118 in(3)
- 0.157 in(3)
- 0.197 in(2)
- 0.236 in(2)
- 0.25 in(12)
to
Corner Radius
Corner Radius
- 0.1 mm(134)
- 0.2 mm(174)
- 0.4 mm(301)
- 0.6 mm(18)
- 0.8 mm(368)
- 1.2 mm(342)
- 1.6 mm(210)
- 2.375 mm(1)
- 2.4 mm(37)
- 3.0 mm(3)
- 4.0 mm(3)
- 5.0 mm(2)
- 6.0 mm(2)
- 6.35 mm(12)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CG5 (1)
- CG55 (2)
- CG6 (1)
- CM1 (1)
- CW2015 (191)
- CW3020 (12)
- CW5025 (128)
- HCK10 (14)
- PB100 (46)
- PB250 (5)
- THM (231)
- THM-F (2)
- THM-X (147)
- THMF-X (78)
- TN10P (253)
- TN10U (205)
- TN15M (168)
- TN15U (150)
- TN2000 (235)
- TN20K (287)
- TN20P (329)
- TN30M (215)
- TN30P (180)
- TN4000 (218)
- TN6010 (95)
- TN6025 (31)
- TTM08 (2)
- TTM09 (12)
- TTMS (2)
- TTR (28)
- TTR-X (17)
- TTS (108)
- W00162 (4)
- WBH10P (134)
- WBH10U (56)
- WBH20P (202)
- WBH30P (130)
- WBK40U (28)
- WBK45U (15)
- WDN00U (69)
- WDN25U (179)
- WK05CT (267)
- WK15CT (214)
- WK20CT (359)
- WM15CT (298)
- WM25CT (352)
- WM35CT (237)
- WP05CT (59)
- WP15CT (384)
- WP20TT (26)
- WP25CT (376)
- WP35CT (298)
- WS10PT (298)
- WS25PT (303)
- WU05PT (56)
- WU10HT (313)
- WU10PT (235)
- WU25PT (248)
Hand Of Tool
Hand Of Tool
- L (153)
- N (57)
- R (199)
Wiper Insert
Wiper Insert
- N (402)
- Y (98)
F Dimension
F Dimension
- 4.0 mm(1)
- 6.0 mm(2)
- 6.35 mm(2)
- 7.0 mm(2)
- 8.0 mm(1)
- 9.0 mm(2)
- 9.5 mm(1)
- 9.52 mm(2)
- 9.959 mm(1)
- 10.0 mm(7)
- 11.0 mm(2)
- 12.0 mm(9)
- 12.25 mm(1)
- 12.5 mm(17)
- 12.6 mm(1)
- 12.62 mm(1)
- 12.7 mm(7)
- 13.0 mm(5)
- 14.0 mm(1)
- 15.0 mm(2)
- 15.5 mm(1)
- 15.875 mm(3)
- 15.88 mm(1)
- 16.0 mm(10)
- 16.5 mm(1)
- 17.0 mm(5)
- 17.5 mm(1)
- 18.0 mm(1)
- 18.5 mm(1)
- 19.05 mm(2)
- 19.5 mm(1)
- 20.0 mm(19)
- 22.0 mm(8)
- 23.16 mm(2)
- 25.0 mm(54)
- 25.4 mm(17)
- 27.0 mm(8)
- 28.65 mm(1)
- 31.75 mm(38)
- 32.0 mm(99)
- 33.55 mm(1)
- 35.0 mm(7)
- 38.1 mm(12)
- 40.0 mm(30)
- 43.0 mm(1)
- 47.02 mm(1)
- 50.0 mm(12)
- 50.8 mm(5)
to
F Dimension
F Dimension
- 0.1575 in(1)
- 0.2362 in(2)
- 0.25 in(2)
- 0.276 in(2)
- 0.315 in(1)
- 0.354 in(2)
- 0.3748 in(1)
- 0.375 in(1)
- 0.3921 in(1)
- 0.393 in(1)
- 0.3937 in(4)
- 0.394 in(2)
- 0.433 in(1)
- 0.4331 in(1)
- 0.472 in(4)
- 0.4724 in(5)
- 0.4823 in(1)
- 0.492 in(1)
- 0.4921 in(16)
- 0.496 in(1)
- 0.497 in(1)
- 0.5 in(7)
- 0.5118 in(2)
- 0.512 in(3)
- 0.5512 in(1)
- 0.5906 in(2)
- 0.61 in(1)
- 0.625 in(4)
- 0.6299 in(9)
- 0.63 in(1)
- 0.6496 in(1)
- 0.669 in(2)
- 0.6693 in(3)
- 0.689 in(1)
- 0.709 in(1)
- 0.7283 in(1)
- 0.75 in(2)
- 0.768 in(1)
- 0.787 in(2)
- 0.7874 in(17)
- 0.8661 in(8)
- 0.912 in(2)
- 0.984 in(18)
- 0.9843 in(36)
- 1.0 in(17)
- 1.063 in(8)
- 1.128 in(1)
- 1.25 in(38)
- 1.2598 in(58)
- 1.26 in(42)
- 1.321 in(1)
- 1.378 in(7)
- 1.5 in(12)
- 1.5748 in(11)
- 1.575 in(19)
- 1.693 in(1)
- 1.851 in(1)
- 1.9685 in(5)
- 1.969 in(6)
- 1.9895 in(1)
- 2.0 in(5)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 0.512 in(2)
- 0.63 in(2)
- 0.787 in(1)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 13.0 mm(2)
- 16.0 mm(2)
- 20.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 13.0 mm(2)
- 16.0 mm(2)
- 20.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.512 in(2)
- 0.63 in(2)
- 0.787 in(1)
to
Cutting Direction
Cutting Direction
- B (123)
- E (39)
- S (247)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (230)
- DOUBLE POSITIVE (1)
- NEGATIVE-ZERO (57)
- NEUTRAL (ZERO) (109)
- POSITIVE-ZERO (12)
Maximum Bore Depth
Maximum Bore Depth
- 1.56 in(2)
- 1.88 in(2)
- 2.52 in(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 40.0 mm(2)
- 48.0 mm(2)
- 64.0 mm(1)
to
Boring Bar Material
Boring Bar Material
- S (5)
Front-End
Clamp Style
Clamp Style
- C (26)
- D (147)
- M (16)
- N (2)
- P (106)
- S (112)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (113)
- D-DIAMOND/RHOMBIC 55 (86)
- N/K-PARALLELOGRAM 55 (2)
- R-ROUND (26)
- S-SQUARE 90 (72)
- T-TRIANGLE 60 (35)
- V-DIAMOND/RHOMBIC 35 (47)
- W-TRIGON 80 (28)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.6299 in(2)
- 0.748 in(1)
- 0.7756 in(2)
- 0.7874 in(2)
- 0.9843 in(3)
- 1.1024 in(1)
- 1.1417 in(2)
- 1.378 in(1)
- 1.4961 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 16.0 mm(2)
- 19.0 mm(1)
- 19.7 mm(2)
- 20.0 mm(2)
- 25.0 mm(3)
- 28.0 mm(1)
- 29.0 mm(2)
- 35.0 mm(1)
- 38.0 mm(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (99)
- B L (224)
- C A (191)
- C N (165)
- D P (179)
- H T (26)
- H W (388)
Back-End
Connection Type
Connection Type
- BORING BAR (5)
- SQUARE SHANK (404)
Back-End Diameter
Back-End Diameter
- 10.0 mm(2)
- 12.0 mm(2)
- 16.0 mm(1)
to
Shank Height
Shank Height
- 0.315 in(1)
- 0.375 in(1)
- 0.3937 in(4)
- 0.472 in(1)
- 0.4724 in(9)
- 0.5 in(6)
- 0.625 in(2)
- 0.6299 in(20)
- 0.63 in(2)
- 0.75 in(19)
- 0.787 in(15)
- 0.7874 in(46)
- 0.788 in(10)
- 0.984 in(37)
- 0.9843 in(66)
- 0.985 in(1)
- 1.0 in(45)
- 1.25 in(18)
- 1.2598 in(40)
- 1.26 in(34)
- 1.5 in(6)
- 1.5748 in(12)
- 1.575 in(8)
- 1.969 in(1)
to
Shank Height
Shank Height
- 8.0 mm(1)
- 9.52 mm(1)
- 10.0 mm(4)
- 12.0 mm(10)
- 12.7 mm(6)
- 15.88 mm(2)
- 16.0 mm(22)
- 19.05 mm(19)
- 20.0 mm(71)
- 25.0 mm(103)
- 25.03 mm(1)
- 25.4 mm(45)
- 31.75 mm(18)
- 32.0 mm(74)
- 38.1 mm(6)
- 40.0 mm(20)
- 50.0 mm(1)
to
Shank Width
Shank Width
- 0.315 in(1)
- 0.375 in(1)
- 0.3937 in(5)
- 0.472 in(1)
- 0.4724 in(9)
- 0.5 in(6)
- 0.625 in(2)
- 0.6299 in(20)
- 0.63 in(2)
- 0.75 in(19)
- 0.787 in(16)
- 0.7874 in(46)
- 0.788 in(9)
- 0.984 in(52)
- 0.9843 in(88)
- 1.0 in(49)
- 1.25 in(14)
- 1.2598 in(17)
- 1.26 in(22)
- 1.5 in(6)
- 1.5748 in(10)
- 1.575 in(8)
- 1.969 in(1)
to
Shank Width
Shank Width
- 8.0 mm(1)
- 9.52 mm(1)
- 10.0 mm(5)
- 12.0 mm(10)
- 12.7 mm(6)
- 15.88 mm(2)
- 16.0 mm(22)
- 19.05 mm(19)
- 20.0 mm(71)
- 25.0 mm(140)
- 25.4 mm(49)
- 31.75 mm(14)
- 32.0 mm(39)
- 38.1 mm(6)
- 40.0 mm(18)
- 50.0 mm(1)
to
No filters matching ""
