Bienvenue
Veuillez confirmer vos préférences
Mettre à jour les préférences

Suggestions de produit

Product Family suggestions

WIDIA à votre service

Call (833) 931-0077

Appeler maintenant

Support Clients

Trouver les coordonnées des supports clients dans le monde

Commande rapide
Article(s) ajoutées avec succès au panier
Voir le panier

Dimension du taraud

Calculer la dimension du taraud pour le taraudage.

These calculations are based upon theoretical values and are only intended for planning purposes. Actual results will vary. No responsibility from Kennametal is assumed.

Cutting Tap Parameters
Metric
Inch

Cutting Tap Parameters

in mm
Enter desired % or leave blank if you do not know. Cutting Taps 68% to 70% recommended
%
Resulting Hole Size

Resulting Hole Size

in.
Forming Tap Parameters

Forming Tap Parameters

in mm
Enter desired % or leave blank if you do not know. Cutting Taps 68% to 70% recommended
%
Resulting Hole Size

Resulting Hole Size

in.
Calculate Major Diameter For Tap Drill Size

Calculate Major Diameter For Tap Drill Size

in mm
Results

Results

in

Suggested Percentages of Full Thread in Tapped Holes

A common internal thread, drilled so that it results in 50% of full thread will break the external thread, before the internal thread will strip. A common internal thread drilled out so that it contains 100% of full thread is only 5% stronger than a 75% height of thread, yet it requires 3 times the power to tap.

Vous êtes sur le point d’ajouter à votre page mes solutions. Souhaitez-vous continuer ?
product-image
Please adjust the following properties from

catalogue ISO

catalogue ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Vous devez être connecté pour voir les informations de votre tableau de bord
Session expired due to inactivity, please login again
Le(s) produit(s) () que vous essayez d’ajouter au panier est/sont indisponible(s), veuillez Contacter le service client.
article(s) ajouté(s) avec succès au panier
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number catalogue ISO Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Votre inscription est désormais validée. Vous pouvez vous connecter dès maintenant et vous familiariser avec notre site.

You are about to leave the Solution building process.

Are you sure you want to leave?