successfully added to cart
View Cart

Notifications

Mark all as read

Stabilità modulare

Una piattaforma di foratura modulare stabile corredata da tre geometrie di inserti per affrontare svariate applicazioni. 

La punta TDMX è stata progettata con un design affidabile della sede inserto per garantire la massima stabilità anche in applicazioni di foratura complesse, come fori incrociati, ingresso/uscita inclinati e tagli interrotti.

La punta TDMX è un utensile All-Star. 

Ordina utensili con spedizione in giornata con All-Star! Maggiori informazioni.

MS (M)

Prima scelta per applicazioni su acciaio inossidabile e super leghe.

FPE (M)

Prima scelta per applicazioni di foratura a fondo piatto su acciaio e ghisa.

   

Caratteristiche del prodotto:

  • Design della sede studiato apposta per aumentare la stabilità nelle applicazioni particolarmente impegnative
  • Gamma di diametri degli inserti da 16 mm a 40 mm (da 0,629" a 1,574")
  • Margini su tutta la lunghezza del corpo per garantire la linearità e la qualità di foratura
  • Migliore evacuazione del truciolo
  • Uscita del canale per il refrigerante esattamente dietro il tagliente
  • Stelo flangiato per una maggiore rigidità
  • Vani lucidati per ottenere una migliore evacuazione del truciolo
  • Sede inserto rastremata sull’asse Z
  • Qualità progettate per applicazioni specifiche in base ai materiali
  • Possibilità di riaffilatura fino a 3 volte
  • Il sistema di bloccaggio frontale dell’inserto permette di cambiarlo senza smontare la punta dal mandrino

 

 

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (340)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (340)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (340)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (340)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (340)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (340)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (340)
  • M Stainless Steel (440)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (440)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (440)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (440)
  • K Cast Iron (440)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (440)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (440)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (440)
  • N Non-Ferrous Materials (284)
    • N1
      Wrought Aluminum
      (284)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (284)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (284)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (284)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (284)
    • N6
      Carbon, Graphite Composites, CFRP
      (284)
    • N7
      MMC's
      (284)
  • S High-Temp Alloys (340)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (340)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (340)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (340)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (340)
Select All Star
  • CN (44)
  • DE (52)
  • GB (5)
  • IN (4)
  • SG (49)
  • US (31)
Applications
Applications
  • Convex Drilling Convex Drilling (184)
  • Drilling Drilling (184)
  • ID Thread Turning ID Thread Turning (100)
  • Inclined Entry Drilling Inclined Entry Drilling (184)
  • Inclined Exit Drilling Inclined Exit Drilling (184)
  • Stacked Plates Drilling Stacked Plates Drilling (184)
Cutting Diameter
Cutting Diameter
  • 0.63 in (13)
  • 0.638 in (12)
  • 0.641 in (13)
  • 0.65 in (13)
  • 0.656 in (13)
  • 0.669 in (13)
  • 0.672 in (13)
  • 0.689 in (12)
  • 0.69 in (13)
  • 0.694 in (12)
  • 0.702 in (12)
  • 0.704 in (12)
  • 0.709 in (13)
  • 0.719 in (12)
  • 0.728 in (13)
  • 0.734 in (12)
  • 0.74 in (12)
  • 0.748 in (13)
  • 0.75 in (13)
  • 0.756 in (12)
  • 0.759 in (12)
  • 0.766 in (12)
  • 0.768 in (13)
  • 0.776 in (12)
  • 0.781 in (13)
  • 0.787 in (13)
  • 0.791 in (12)
  • 0.795 in (12)
  • 0.797 in (12)
  • 0.799 in (12)
  • 0.803 in (12)
  • 0.807 in (13)
  • 0.811 in (12)
  • 0.814 in (12)
  • 0.816 in (12)
  • 0.82 in (12)
  • 0.824 in (12)
  • 0.828 in (13)
  • 0.844 in (12)
  • 0.846 in (13)
  • 0.866 in (13)
  • 0.875 in (12)
  • 0.884 in (12)
  • 0.886 in (13)
  • 0.906 in (13)
  • 0.925 in (13)
  • 0.937 in (12)
  • 0.946 in (13)
  • 0.965 in (13)
  • 0.969 in (12)
  • 0.984 in (13)
  • 1.0 in (13)
  • 1.004 in (13)
  • 1.012 in (14)
  • 1.014 in (12)
  • 1.016 in (12)
  • 1.024 in (13)
  • 1.032 in (12)
  • 1.039 in (13)
  • 1.043 in (13)
  • 1.047 in (12)
  • 1.063 in (13)
  • 1.083 in (13)
  • 1.094 in (12)
  • 1.102 in (13)
  • 1.109 in (12)
  • 1.122 in (13)
  • 1.125 in (12)
  • 1.143 in (13)
  • 1.156 in (12)
  • 1.161 in (13)
  • 1.172 in (12)
  • 1.181 in (13)
  • 1.188 in (12)
  • 1.201 in (13)
  • 1.219 in (12)
  • 1.22 in (13)
  • 1.24 in (13)
  • 1.25 in (13)
  • 1.26 in (9)
  • 1.28 in (9)
  • 1.299 in (9)
  • 1.313 in (8)
  • 1.339 in (9)
  • 1.344 in (8)
  • 1.375 in (8)
  • 1.379 in (9)
  • 1.399 in (9)
  • 1.417 in (9)
  • 1.437 in (9)
  • 1.457 in (9)
  • 1.476 in (9)
  • 1.496 in (9)
  • 1.5 in (9)
  • 1.508 in (7)
  • 1.516 in (9)
  • 1.536 in (9)
  • 1.547 in (7)
  • 1.555 in (9)
  • 1.575 in (9)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 16.0 mm (13)
  • 16.2 mm (12)
  • 16.276 mm (13)
  • 16.5 mm (13)
  • 16.675 mm (13)
  • 17.0 mm (13)
  • 17.075 mm (13)
  • 17.475 mm (12)
  • 17.5 mm (13)
  • 17.6 mm (12)
  • 17.8 mm (12)
  • 17.85 mm (12)
  • 18.0 mm (13)
  • 18.25 mm (12)
  • 18.5 mm (13)
  • 18.651 mm (12)
  • 18.8 mm (12)
  • 19.0 mm (13)
  • 19.05 mm (13)
  • 19.201 mm (12)
  • 19.276 mm (12)
  • 19.451 mm (12)
  • 19.5 mm (13)
  • 19.701 mm (12)
  • 19.85 mm (13)
  • 20.0 mm (13)
  • 20.1 mm (12)
  • 20.201 mm (12)
  • 20.25 mm (12)
  • 20.3 mm (12)
  • 20.401 mm (12)
  • 20.5 mm (13)
  • 20.6 mm (12)
  • 20.651 mm (12)
  • 20.701 mm (12)
  • 20.8 mm (12)
  • 20.901 mm (12)
  • 21.0 mm (13)
  • 21.425 mm (12)
  • 21.5 mm (13)
  • 22.0 mm (13)
  • 22.225 mm (12)
  • 22.451 mm (12)
  • 22.5 mm (13)
  • 23.0 mm (13)
  • 23.5 mm (13)
  • 23.8 mm (12)
  • 24.0 mm (13)
  • 24.5 mm (13)
  • 24.6 mm (12)
  • 25.0 mm (13)
  • 25.401 mm (13)
  • 25.5 mm (13)
  • 25.675 mm (12)
  • 25.701 mm (12)
  • 25.75 mm (12)
  • 25.8 mm (12)
  • 26.0 mm (13)
  • 26.201 mm (12)
  • 26.401 mm (13)
  • 26.5 mm (13)
  • 26.6 mm (12)
  • 27.0 mm (13)
  • 27.5 mm (13)
  • 27.776 mm (12)
  • 28.0 mm (13)
  • 28.175 mm (12)
  • 28.5 mm (13)
  • 28.576 mm (12)
  • 29.0 mm (13)
  • 29.375 mm (12)
  • 29.5 mm (13)
  • 29.776 mm (12)
  • 30.0 mm (13)
  • 30.175 mm (12)
  • 30.5 mm (13)
  • 30.951 mm (12)
  • 31.0 mm (13)
  • 31.5 mm (13)
  • 31.75 mm (13)
  • 32.0 mm (9)
  • 32.5 mm (9)
  • 33.0 mm (9)
  • 33.35 mm (8)
  • 34.0 mm (9)
  • 34.125 mm (8)
  • 34.926 mm (8)
  • 35.0 mm (9)
  • 35.5 mm (9)
  • 36.0 mm (9)
  • 36.5 mm (9)
  • 37.0 mm (9)
  • 37.5 mm (9)
  • 38.0 mm (9)
  • 38.1 mm (9)
  • 38.301 mm (7)
  • 38.5 mm (9)
  • 39.0 mm (9)
  • 39.5 mm (9)
  • 40.0 mm (9)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 26.0 mm (2)
  • 27.0 mm (2)
  • 29.0 mm (2)
  • 30.0 mm (2)
  • 32.0 mm (2)
  • 33.0 mm (2)
  • 35.0 mm (2)
  • 36.0 mm (2)
  • 38.0 mm (2)
  • 39.0 mm (2)
  • 41.0 mm (2)
  • 42.0 mm (2)
  • 44.0 mm (2)
  • 45.0 mm (2)
  • 47.0 mm (2)
  • 48.0 mm (2)
  • 51.0 mm (2)
  • 54.0 mm (2)
  • 57.0 mm (2)
  • 60.0 mm (2)
  • 63.0 mm (2)
  • 66.0 mm (2)
  • 69.0 mm (2)
  • 72.0 mm (2)
  • 75.0 mm (2)
  • 78.0 mm (2)
  • 81.0 mm (2)
  • 84.0 mm (2)
  • 85.0 mm (2)
  • 87.0 mm (2)
  • 90.0 mm (4)
  • 93.0 mm (2)
  • 95.0 mm (2)
  • 96.0 mm (2)
  • 100.0 mm (2)
  • 102.0 mm (2)
  • 105.0 mm (2)
  • 108.0 mm (2)
  • 110.0 mm (2)
  • 114.0 mm (2)
  • 115.0 mm (2)
  • 120.0 mm (4)
  • 125.0 mm (2)
  • 130.0 mm (2)
  • 135.0 mm (2)
  • 136.0 mm (2)
  • 140.0 mm (2)
  • 144.0 mm (2)
  • 145.0 mm (2)
  • 150.0 mm (2)
  • 152.0 mm (2)
  • 155.0 mm (2)
  • 160.0 mm (4)
  • 168.0 mm (2)
  • 170.0 mm (2)
  • 176.0 mm (2)
  • 180.0 mm (2)
  • 184.0 mm (2)
  • 190.0 mm (2)
  • 192.0 mm (2)
  • 200.0 mm (4)
  • 204.0 mm (2)
  • 208.0 mm (2)
  • 216.0 mm (4)
  • 224.0 mm (2)
  • 228.0 mm (2)
  • 232.0 mm (2)
  • 240.0 mm (4)
  • 248.0 mm (2)
  • 252.0 mm (2)
  • 256.0 mm (2)
  • 264.0 mm (2)
  • 272.0 mm (2)
  • 276.0 mm (2)
  • 288.0 mm (4)
  • 300.0 mm (2)
  • 304.0 mm (2)
  • 312.0 mm (2)
  • 320.0 mm (2)
  • 324.0 mm (2)
  • 336.0 mm (2)
  • 348.0 mm (2)
  • 360.0 mm (2)
  • 372.0 mm (2)
  • 384.0 mm (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.024 in (2)
  • 1.063 in (2)
  • 1.143 in (2)
  • 1.181 in (2)
  • 1.26 in (2)
  • 1.299 in (2)
  • 1.379 in (2)
  • 1.417 in (2)
  • 1.496 in (2)
  • 1.536 in (2)
  • 1.614 in (2)
  • 1.655 in (2)
  • 1.732 in (2)
  • 1.772 in (2)
  • 1.85 in (2)
  • 1.891 in (2)
  • 2.008 in (2)
  • 2.126 in (2)
  • 2.244 in (2)
  • 2.362 in (2)
  • 2.48 in (2)
  • 2.598 in (2)
  • 2.717 in (2)
  • 2.835 in (2)
  • 2.953 in (2)
  • 3.071 in (2)
  • 3.189 in (2)
  • 3.307 in (2)
  • 3.346 in (2)
  • 3.426 in (2)
  • 3.543 in (4)
  • 3.661 in (2)
  • 3.74 in (2)
  • 3.781 in (2)
  • 3.938 in (2)
  • 4.016 in (2)
  • 4.134 in (2)
  • 4.252 in (2)
  • 4.331 in (2)
  • 4.488 in (2)
  • 4.529 in (2)
  • 4.724 in (4)
  • 4.921 in (2)
  • 5.118 in (2)
  • 5.315 in (2)
  • 5.354 in (2)
  • 5.513 in (2)
  • 5.67 in (2)
  • 5.71 in (2)
  • 5.906 in (2)
  • 5.984 in (2)
  • 6.102 in (2)
  • 6.299 in (4)
  • 6.614 in (2)
  • 6.694 in (2)
  • 6.929 in (2)
  • 7.087 in (2)
  • 7.244 in (2)
  • 7.48 in (2)
  • 7.559 in (2)
  • 7.875 in (4)
  • 8.031 in (2)
  • 8.189 in (2)
  • 8.504 in (4)
  • 8.819 in (2)
  • 8.976 in (2)
  • 9.134 in (2)
  • 9.449 in (4)
  • 9.764 in (2)
  • 9.921 in (2)
  • 10.079 in (2)
  • 10.394 in (2)
  • 10.709 in (2)
  • 10.866 in (2)
  • 11.339 in (4)
  • 11.811 in (2)
  • 11.969 in (2)
  • 12.283 in (2)
  • 12.598 in (2)
  • 12.756 in (2)
  • 13.228 in (2)
  • 13.701 in (2)
  • 14.173 in (2)
  • 14.646 in (2)
  • 15.118 in (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Connection Style
Connection Style
  • Cylindrical Shank 1 Flat (152)
  • Straight-Cylindrical w/Flange (32)
Number of Flutes
Number of Flutes
  • 2 (184)
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Chamfer
Corner Chamfer
  • 0.0 mm (256)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (256)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WM15PD (284)
  • WP40PD (340)
Hand Of Tool
Hand Of Tool
  • R (184)
Wiper Insert
Wiper Insert
  • N (256)
Drill Type
Drill Type
  • 86-01 (184)
frontEnd
Point Angle
Point Angle
  • 140.0 (200)
  • 150.0 (56)
Point Angle Min to Point Angle Max
insertGeometry
Shape
Shape
  • TDMX DRILL (256)
Insert Seat Size
Insert Seat Size
  • A (14)
  • B (17)
  • C (12)
  • D (20)
  • E (26)
  • F (8)
  • G (10)
  • H (8)
  • I (8)
  • J (17)
  • K (13)
  • L (8)
  • M (10)
  • N (10)
  • O (10)
  • P (9)
  • Q (11)
  • R (13)
  • S (12)
  • T (20)
Cutting Tool Material
Cutting Tool Material
  • H W (256)
Cutting Diameter Insert
Cutting Diameter Insert
  • 0.63 in (3)
  • 0.638 in (2)
  • 0.641 in (3)
  • 0.65 in (3)
  • 0.656 in (3)
  • 0.669 in (3)
  • 0.672 in (3)
  • 0.689 in (2)
  • 0.69 in (3)
  • 0.694 in (2)
  • 0.702 in (2)
  • 0.704 in (2)
  • 0.709 in (3)
  • 0.719 in (2)
  • 0.728 in (3)
  • 0.734 in (2)
  • 0.74 in (2)
  • 0.748 in (3)
  • 0.75 in (3)
  • 0.756 in (2)
  • 0.759 in (2)
  • 0.766 in (2)
  • 0.768 in (3)
  • 0.776 in (2)
  • 0.781 in (3)
  • 0.787 in (3)
  • 0.791 in (2)
  • 0.795 in (2)
  • 0.797 in (2)
  • 0.799 in (2)
  • 0.803 in (2)
  • 0.807 in (3)
  • 0.811 in (2)
  • 0.814 in (2)
  • 0.816 in (2)
  • 0.82 in (2)
  • 0.824 in (2)
  • 0.828 in (3)
  • 0.844 in (2)
  • 0.846 in (3)
  • 0.866 in (3)
  • 0.875 in (2)
  • 0.884 in (2)
  • 0.886 in (3)
  • 0.906 in (3)
  • 0.925 in (3)
  • 0.937 in (2)
  • 0.946 in (3)
  • 0.965 in (3)
  • 0.969 in (2)
  • 0.984 in (3)
  • 1.0 in (3)
  • 1.004 in (3)
  • 1.012 in (4)
  • 1.014 in (2)
  • 1.016 in (2)
  • 1.024 in (3)
  • 1.032 in (2)
  • 1.039 in (3)
  • 1.043 in (3)
  • 1.047 in (2)
  • 1.063 in (3)
  • 1.083 in (3)
  • 1.094 in (2)
  • 1.102 in (3)
  • 1.109 in (2)
  • 1.122 in (3)
  • 1.125 in (2)
  • 1.143 in (3)
  • 1.156 in (2)
  • 1.161 in (3)
  • 1.172 in (2)
  • 1.181 in (3)
  • 1.188 in (2)
  • 1.201 in (3)
  • 1.219 in (2)
  • 1.22 in (3)
  • 1.24 in (3)
  • 1.25 in (3)
  • 1.26 in (3)
  • 1.28 in (3)
  • 1.299 in (3)
  • 1.313 in (2)
  • 1.339 in (3)
  • 1.344 in (2)
  • 1.375 in (2)
  • 1.379 in (3)
  • 1.399 in (3)
  • 1.417 in (3)
  • 1.437 in (3)
  • 1.457 in (3)
  • 1.476 in (3)
  • 1.496 in (3)
  • 1.5 in (3)
  • 1.508 in (1)
  • 1.516 in (3)