Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Inserti aggiuntivi

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Select First Choice
  • DE (15)
  • IN (49)
Workpiece Material
  • P Steel (150)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (150)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (150)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (150)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (145)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (145)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (132)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (132)
  • M Stainless Steel (126)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (126)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (126)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (126)
  • K Cast Iron (168)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (168)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (168)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (168)
  • N Non-Ferrous Materials (58)
    • N1
      Wrought Aluminum
      (58)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (58)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (58)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (2)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (2)
  • S High-Temp Alloys (70)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (51)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (51)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (51)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (70)
  • H Hardened Materials (33)
    • H1
      Hardened Materials 44-48 HRC
      (33)
    • H2
      Hardened Materials 48-55 HRC
      (5)
    • H3
      Hardened Materials 56-60 HRC
      (5)
Cutting Edges Per Insert
  • 1.0 (28)
  • 2.0 (27)
  • 3.0 (57)
  • 4.0 (110)
  • 6.0 (1)
to
cornerConfiguration
Corner Radius
  • 0.0 (148)
  • 0.75 (3)
  • 0.79 (9)
  • 0.8 (5)
  • 1.5 (3)
  • 1.59 (5)
  • 1.6 (8)
  • 1.67 (3)
  • 2.38 (2)
  • 3.175 (2)
  • 3.18 (1)
  • 3.4975 (3)
  • 3.5 (3)
  • 5.0 (7)
  • 6.0 (7)
  • 8.0 (6)
  • 50.0 (8)
to
Corner Radius
  • 0.0 (148)
  • 0.03 (3)
  • 0.031 (11)
  • 0.0313 (3)
  • 0.059 (3)
  • 0.062 (5)
  • 0.063 (8)
  • 0.066 (3)
  • 0.094 (2)
  • 0.125 (3)
  • 0.1377 (3)
  • 0.1378 (3)
  • 0.1969 (7)
  • 0.236 (6)
  • 0.2362 (1)
  • 0.315 (6)
  • 1.9685 (8)
to
Corner Chamfer
  • 0.026 (3)
  • 0.027 (8)
  • 0.0276 (1)
  • 0.028 (2)
  • 0.0292 (4)
  • 0.039 (7)
  • 0.0394 (2)
  • 0.04 (4)
  • 0.0405 (6)
  • 0.0409 (1)
  • 0.0462 (3)
  • 0.0471 (1)
  • 0.0476 (3)
  • 0.0487 (3)
  • 0.0546 (14)
  • 0.0584 (17)
  • 0.0595 (10)
  • 0.1017 (1)
to
Corner Chamfer
  • 0.66 (3)
  • 0.69 (8)
  • 0.7 (1)
  • 0.71 (2)
  • 0.74 (4)
  • 1.0 (9)
  • 1.02 (4)
  • 1.029 (6)
  • 1.04 (1)
  • 1.17 (3)
  • 1.2 (1)
  • 1.21 (3)
  • 1.24 (3)
  • 1.39 (14)
  • 1.483 (6)
  • 1.484 (11)
  • 1.511 (10)
  • 2.58 (1)
to
application
Grade Of Cutting Tool
  • THM (28)
  • THM-F (2)
  • THR (1)
  • TN2505 (5)
  • TN25M (10)
  • TN450 (7)
  • TN5515 (17)
  • TN6520 (5)
  • TN6525 (16)
  • TN6540 (22)
  • TN7525 (11)
  • TN7535 (13)
  • TTI25 (9)
  • TTM (1)
  • TTM08 (13)
  • TTM09 (1)
  • TTR (4)
  • WK15CM (11)
  • WP35CM (19)
  • WU20PM (28)
Wiper Insert
  • N (210)
  • Y (13)
frontEnd
Insert Shape
  • A-PARALLELOGRAM 90 (27)
  • L-RECTANGLE 90 (3)
  • R-ROUND (26)
  • S-SQUARE 90 (109)
  • T-TRIANGLE 60 (58)
insertGeometry
Shape
  • A-PARALLELOGRAM 90 (27)
  • L-RECTANGLE 90 (3)
  • R-ROUND (26)
  • S-SQUARE 90 (109)
  • T-TRIANGLE 60 (58)
Insert IC Size
  • 0.25 (3)
  • 0.2754 (3)
  • 0.2756 (3)
  • 0.375 (23)
  • 0.3937 (7)
  • 0.472 (6)
  • 0.4724 (1)
  • 0.5 (113)
  • 0.5118 (1)
  • 0.528 (3)
  • 0.625 (24)
  • 0.6299 (1)
  • 0.63 (5)
to
Insert IC Size
  • 6.35 (3)
  • 6.995 (3)
  • 7.0 (3)
  • 9.52 (6)
  • 9.525 (17)
  • 10.0 (7)
  • 12.0 (7)
  • 12.7 (113)
  • 13.0 (1)
  • 13.41 (3)
  • 15.875 (24)
  • 16.0 (6)
to
Cutting Edge Length
  • 0.4175 (2)
  • 0.4316 (2)
  • 0.4331 (1)
  • 0.4371 (1)
  • 0.441 (1)
  • 0.5 (80)
  • 0.528 (3)
  • 0.5906 (2)
  • 0.625 (24)
  • 0.6478 (6)
  • 0.6495 (9)
  • 0.65 (8)
  • 0.6689 (1)
  • 0.8641 (14)
  • 0.8646 (7)
  • 0.866 (10)
  • 0.8854 (1)
to
Cutting Edge Length
  • 10.604 (2)
  • 10.962 (2)
  • 11.0 (1)
  • 11.102 (1)
  • 11.2 (1)
  • 12.7 (80)
  • 13.41 (3)
  • 15.0 (2)
  • 15.875 (22)
  • 15.88 (2)
  • 16.453 (6)
  • 16.498 (9)
  • 16.5 (8)
  • 17.0 (1)
  • 21.949 (14)
  • 21.961 (7)
  • 21.997 (10)
  • 22.489 (1)
to
Chip Breaker CBMD
  • CA (1)
  • M0 (2)
  • M0T (1)
  • MH (15)
  • MM (34)
  • MS (35)
Cutting Tool Material
  • H T (9)
  • H W (212)
Tolerance Class
  • A (34)
  • C (5)
  • H (4)
  • K (127)
  • M (7)
  • P (46)
other
Grade
  • THM (28)
  • THM-F (2)
  • THR (1)
  • TN2505 (5)
  • TN25M (10)
  • TN450 (7)
  • TN5515 (17)
  • TN6520 (5)
  • TN6525 (16)
  • TN6540 (22)
  • TN7525 (11)
  • TN7535 (13)
  • TTI25 (9)
  • TTM (1)
  • TTM08 (13)
  • TTM09 (1)
  • TTR (4)
  • WK15CM (11)
  • WP35CM (19)
  • WU20PM (28)
Platform
  • ADPT (4)
  • APMT (2)
  • APPT (9)
  • APPT-MM (2)
  • LNCX (3)
  • M170 Series (21)
  • M68 Series (35)
  • RDMX (2)
  • RPMT (1)
  • RPMW (2)
  • SEPT-MM (3)
  • SPAN (5)
  • SPCX (2)
  • SPKN (40)
  • SPKR (4)
  • TNHF (1)
  • TPAN (16)
  • TPKN (26)
  • TPKR (4)
Tool Unit
  • I (223)
  • M (223)
kmtConfigurable
  • false (223)
Category Path
Insert Hand
  • L (23)
  • N (94)
  • R (106)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Face Milling

ISO Inserts • LNCX
(3 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
5343199 LNCX1806AZR11 LNCX1806AZR11   WK15CM 4 18.5000 .7280 6.4000 .2520 10.0000 .3937 2.1600 .0850 0.7500 .0300 0.0500 .0020
    Your price::
    6140047 LNCX1806AZR11 LNCX1806AZR11   THM 4 18.5000 .7280 6.4000 .2520 10.0000 .3937 2.1600 .0850 0.7500 .0300 0.0200 .0008
      Your price::
      6852433 LNCX1806AZR11 LNCX1806AZR11   WP35CM 4 18.5000 .7280 6.4000 .2520 10.0000 .3937 2.1600 .0850 0.7500 .0300 0.0550 .0022
        Your price::
        List price:
        Discount: %
        Your price::
        Replacement This item is not available
        Replacement Product This item may be available through a distributor

        ORIGINAL PRODUCT

        Face Milling

        ISO Inserts • RDMX
        (2 Products)
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
        4147744 RDMX1604M0T RDMX1604M0T   WU20PM 1 16.0000 .6299 4.7600 .1875 0.0550 .0022
          Your price::
          2567081 RDMX10T3M0 RDMX10T3M0   WU20PM 1 10.0000 .3937 3.9700 .1563 0.0450 .0018
            Your price::
            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor

            ORIGINAL PRODUCT

            Face Milling

            ISO Inserts • RPMT
            (1 Products)
            View Products
            SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
            4144073 RPMT1204M0 RPMT1204M0   WU20PM 1 12.0000 .4724 4.7600 .1875 0.0500 .0020
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              Inserti aggiuntivi

              Inserti TPKN
              (26 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length Average Chip Thickness [HM] Average Chip Thickness [HM]
              6873002 TPKN2204PDR TPKN2204PDR   WP35CM 3 12.7000 .5000 21.9490 .8641 4.7600 .1875 0.7200 .0282 0.0600 .0024
                Your price::
                6877209 TPKN2204PDL TPKN2204PDL   WP35CM 3 12.7000 .5000 21.9490 .8641 4.7600 .1875 0.7200 .0282 0.0600 .0024
                  Your price::
                  3865253 TPKN1603PDR TPKN1603PDR   WU20PM 3 9.5250 .3750 16.5000 .6500 3.1800 .1250 1.2850 .0506 0.0450 .0018
                    Your price::
                    2557586 TPKN2204PDR TPKN2204PDR   THM 3 12.7000 .5000 21.9490 .8641 4.7600 .1875 0.7200 .0282 0.0200 .0008
                      List price:
                      $12.17 /each.
                      Your price::
                      2557571 TPKN2204PDR TPKN2204PDR   WU20PM 3 12.7000 .5000 21.9490 .8641 4.7600 .1875 0.7200 .0282 0.0500 .0020
                        List price:
                        $15.11 /each.
                        Your price::
                        2557538 TPKN2204PDL TPKN2204PDL   WU20PM 3 12.7000 .5000 21.9490 .8641 4.7600 .1875 0.7200 .0282 0.0500 .0020
                          List price:
                          $8.60 /each.
                          Your price::
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor

                          ORIGINAL PRODUCT

                          Inserti aggiuntivi

                          Inserti
                          (41 Products)
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [M] Gage Dimension [M] Gage Dimension [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length Average Chip Thickness [HM] Average Chip Thickness [HM]
                          6801237 SPKN1504EDR SPKN1504EDR   WP35CM 4 15.8750 .6250 15.8750 .6250 2.4800 .0976 4.7600 .1875 0.9380 .0369 0.0500 .0020
                            Your price::
                            6872920 SPKN1203EDR SPKN1203EDR   WP35CM 4 12.7000 .5000 12.7000 .5000 1.8000 .0709 3.1800 .1250 1.0270 .0404 0.0500 .0020
                              Your price::
                              6877207 SPKN1504EDL SPKN1504EDL   WP35CM 4 15.8750 .6250 15.8750 .6250 2.4800 .0976 4.7600 .1875 0.9380 .0369 0.0600 .0024
                                Your price::
                                6877206 SPKN1203EDL SPKN1203EDL   WP35CM 4 12.7000 .5000 12.7000 .5000 1.8000 .0709 3.1800 .1250 1.0270 .0404 0.0500 .0020
                                  Your price::
                                  5630205 SPKN1203EDR SPKN1203EDR   WK15CM 4 12.7000 .5000 12.7000 .5000 1.8000 .0709 3.1800 .1250 1.0270 .0404 0.0500 .0020
                                    Your price::
                                    5898252 SPKN1203EDL SPKN1203EDL   WK15CM 4 12.7000 .5000 12.7000 .5000 1.8000 .0709 3.1800 .1250 1.0270 .0404 0.0500 .0020
                                      Your price::
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor

                                      ORIGINAL PRODUCT

                                      Face Milling

                                      ISO Inserts • APMT
                                      (2 Products)
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                      6196991 APMT1604PDR APMT1604PDR   WU20PM 2 17.0000 .6689 4.7600 .1875 0.8000 .0312 0.0500 .0020
                                        Your price::
                                        6196890 APMT1135PDR APMT1135PDR   WU20PM 2 11.2000 .4410 3.5000 .1378 0.8000 .0312 0.0500 .0020
                                          Your price::
                                          List price:
                                          Discount: %
                                          Your price::
                                          Replacement This item is not available
                                          Replacement Product This item may be available through a distributor

                                          ORIGINAL PRODUCT

                                          Frese classiche • Serie M68

                                          Inserti M68 • SE1203..
                                          (14 Products)
                                          View Products
                                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [M] Gage Dimension [M] Gage Dimension [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length Average Chip Thickness [HM] Average Chip Thickness [HM]
                                          2562668 SEKN1203AFN SEKN1203AFN   THM 4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1800 .1250 1.6490 .0649 0.0200 .0008
                                            List price:
                                            $9.93 /each.
                                            Your price::
                                            2029161 SEKN1203AFN1 SEKN42AFN1   TN7525 4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1800 .1250 1.6500 .0650 0.1400 .0055
                                              List price:
                                              $17.62 /each.
                                              Your price::
                                              2029156 SEKN1203AFN1 SEKN42AFN1   TN7535 4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1800 .1250 1.6500 .0650 0.1400 .0055
                                                List price:
                                                $15.51 /each.
                                                Your price::
                                                2029160 SEKN1203AFN1 SEKN1203AFN1   TN5515 4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1800 .1250 1.6500 .0650 0.1400 .0055
                                                  Your price::
                                                  2028349 SEKN1203AFN1 SEKN42AFN1   TTI25 4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1800 .1250 1.6500 .0650 0.1400 .0055
                                                    List price:
                                                    $14.74 /each.
                                                    Your price::
                                                    2028350 SEKN1203AFN1 SEKN42AFN1   THM 4 12.7000 .5000 12.7000 .5000 1.6550 .0652 3.1800 .1250 1.6500 .0650 0.1400 .0055
                                                      List price:
                                                      $13.99 /each.
                                                      Your price::
                                                      List price:
                                                      Discount: %
                                                      Your price::
                                                      Replacement This item is not available
                                                      Replacement Product This item may be available through a distributor

                                                      ORIGINAL PRODUCT

                                                      Inserti aggiuntivi

                                                      TPKR - Inserti MS
                                                      (14 Products)
                                                      View Products
                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                      4120195 TPKR1603PDRMS TPKR1603PDRMS   WU20PM 3 9.5250 .3750 16.4980 .6495 3.1800 .1250 1.4000 .0551 0.0500 .0020
                                                        Your price::
                                                        2014835 TPKR1603PDRMS TPKR1603PDRMS   TTM08 3 9.5250 .3750 16.4980 .6495 3.1800 .1250 1.4000 .0551 0.1000 .0039
                                                          List price:
                                                          $11.88 /each.
                                                          Your price::
                                                          2020793 TPKR1603PDRMS TPKR32PDRMS   TN7525 3 9.5250 .3750 16.4980 .6495 3.1800 .1250 1.4000 .0551 0.1000 .0039
                                                            List price:
                                                            $14.50 /each.
                                                            Your price::
                                                            2014810 TPKR1603PDRMS TPKR1603PDRMS   TN5515 3 9.5250 .3750 16.4980 .6495 3.1800 .1250 1.4000 .0551 0.1000 .0039
                                                              List price:
                                                              $2.84 /each.
                                                              Your price::
                                                              2020789 TPKR1603PDRMS TPKR1603PDRMS   TN7535 3 9.5250 .3750 16.4980 .6495 3.1800 .1250 1.4000 .0551 0.1000 .0039
                                                                List price:
                                                                $17.27 /each.
                                                                Your price::
                                                                2020795 TPKR1603PDRMS TPKR32PDRMS   TN450 3 9.5250 .3750 16.4980 .6495 3.1800 .1250 1.4000 .0551 0.1000 .0039
                                                                  List price:
                                                                  $17.27 /each.
                                                                  Your price::
                                                                  List price:
                                                                  Discount: %
                                                                  Your price::
                                                                  Replacement This item is not available
                                                                  Replacement Product This item may be available through a distributor

                                                                  ORIGINAL PRODUCT

                                                                  Face Milling

                                                                  ISO Inserts • APPT-MM
                                                                  (4 Products)
                                                                  View Products
                                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                                  6443662 APPT160408PDSRMM APPT160408PDSRMM   WU20PM 2 17.2000 .6770 5.2600 .2070 9.4100 .3710 1.4900 .0590 0.7900 .0310 0.0550 .0022
                                                                    Your price::
                                                                    6820930 APPT100308PDSRMM APPT100308PDSRMM   WU20PM 2 11.1020 .4371 3.5600 .1400 6.7000 .2631     0.8000 .0312 0.0725 .0029
                                                                      Your price::
                                                                      4169133 APPT100308SRMM APPT100308SRMM   TN6540 2 11.1400 .4390 3.5600 .1400 6.7000 .2638 1.0000 .0390 0.8000 .0310 0.1300 .0050
                                                                        List price:
                                                                        $16.38 /each.
                                                                        Your price::
                                                                        4075106 APPT100308SRMM APPT100308SRMM   TN7535 2 11.1400 .4390 3.5600 .1400 6.7000 .2638 1.0000 .0390 0.8000 .0310 0.1300 .0050
                                                                          List price:
                                                                          $18.61 /each.
                                                                          Your price::
                                                                          List price:
                                                                          Discount: %
                                                                          Your price::
                                                                          Replacement This item is not available
                                                                          Replacement Product This item may be available through a distributor

                                                                          ORIGINAL PRODUCT

                                                                          Face Milling

                                                                          ISO Inserts • TPAN
                                                                          (17 Products)
                                                                          View Products
                                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                                          2557645 TPAN2204PPN TPAN2204PPN   THM 3 12.7000 .5000 21.9610 .8646 4.7600 .1875 1.2400 .0487 0.0200 .0008
                                                                            List price:
                                                                            $21.50 /each.
                                                                            Your price::
                                                                            2557665 TPAN1603PPN TPAN1603PPN   WU20PM 3 9.5200 .3750 16.4530 .6478 3.1800 .1250 1.1700 .0462 0.0450 .0018
                                                                              List price:
                                                                              $16.83 /each.
                                                                              Your price::
                                                                              2557685 TPAN1603PPN TPAN1603PPN   THM 3 9.5200 .3750 16.4530 .6478 3.1800 .1250 1.1700 .0462 0.0200 .0008
                                                                                List price:
                                                                                $13.81 /each.
                                                                                Your price::
                                                                                2557789 TPAN2204PDR TPAN2204PDR   WU20PM 3 12.7000 .5000 21.9610 .8646 4.7600 .1875 1.3500 .0533 0.0650 .0026
                                                                                  List price:
                                                                                  $26.84 /each.
                                                                                  Your price::
                                                                                  2557715 TPAN1103PPN TPAN1103PPN   WU20PM 3 6.3500 .2500 10.9620 .4316 3.1800 .1250 0.7100 .0280 0.0400 .0016
                                                                                    List price:
                                                                                    $9.57 /each.
                                                                                    Your price::
                                                                                    2557814 TPAN2204PDR TPAN2204PDR   THM 3 12.7000 .5000 21.9610 .8646 4.7600 .1875 1.3500 .0533 0.0200 .0008
                                                                                      List price:
                                                                                      $21.50 /each.
                                                                                      Your price::
                                                                                      List price:
                                                                                      Discount: %
                                                                                      Your price::
                                                                                      Replacement This item is not available
                                                                                      Replacement Product This item may be available through a distributor

                                                                                      ORIGINAL PRODUCT

                                                                                      Face Milling

                                                                                      ISO Inserts • SPAN
                                                                                      (5 Products)
                                                                                      View Products
                                                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                                                      2557482 SPAN1203EDR SPAN1203EDR   THM 4 12.7000 .5000 12.7000 .5000 3.1800 .1250 1.0280 .0405 0.0200 .0008
                                                                                        List price:
                                                                                        $11.90 /each.
                                                                                        Your price::
                                                                                        2557457 SPAN1203EDR SPAN1203EDR   WU20PM 4 12.7000 .5000 12.7000 .5000 3.1800 .1250 1.0280 .0405 0.0550 .0022
                                                                                          List price:
                                                                                          $14.85 /each.
                                                                                          Your price::
                                                                                          2557387 SPAN1203EDL SPAN1203EDL   THM 4